Step Input Keyboard not scoring properly

I am new to Logic Express, but an experienced user of other notation software and garageband. In Score mode, I have the keyboard input set to quarter notes, but when I click on a key I get the right tone but the length is shown as a sixteenth rest and two tied notes: sixteenth and eighth.
Any ideas why?

Hi,
1. did you check the position indicator is at the correct position? Maybe it was back or forth one sixteenth not. This usually occurs if you input the midi data with the notation view. I'd suggest using the piano roll for input since it has a much more precise display for positioning the position pointer
2. There are many ways to change the display of the midi data in the note sheet. Probably if you change to the piano roll, you'll find you have input a full quarter note, but since it doesn't start at the correct position, the Score Editor displays it in another way. You have many choices to change this display. Take your time to get used to it - the score editor is one of the most demanding things to learn in logic.
Cheers,
Fox

Similar Messages

  • Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

    When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
    Logic Studio 9.1.7, OS X 10.7.5

    Hi
    Playhead in the right place?
    CCT

  • STEP INPUT KEYBOARD

    Will anyone know why my step input keyboard does not show the musical notes. It is showing some weird red symbols including commas, and quotations.

    Hm - sounds like a font problem to me. Check if all fonts are properly installed.
    Fox

  • Step Record is not working properly with 10.5.7.  Was OK with 10.5.6. ???

    I use this function occasionally and it has worked flawlessly with my MIDI guitar controller.
    But since 10.5.7:
    1. I can enter notes by clicking directly on the Step Input Keyboard, but Logic is not responding to notes triggered by my MIDI controller. (Recording MIDI into Logic with my controller is not a problem.)
    2. Notes selected on the Step Input Keyboard are not always input correctly. I select an eighth note and get a quarter note instead.
    None of the above occurred with 10.5.6. I could quickly select specific note types on the Step Input Keyboard and accurately trigger them with my controller.
    Any way to remedy this???
    Thanks.

    I'm using Logic 8.02.

  • Shortcut  - Step input keyboard

    Hello!
    I'm going to use StepinputKeyboard to write some parts in Logic 9.
    Can I use the numpad to set the value of notes?
    Ex:
    1=1/8 5=quarter note etc...
    Can I do it?
    Thanks a lot.

    I don't think you can use the Num Pad, but you can assign your own key commands to all aspects of the step input keyboard.
    Open the Key commands window in Logic Pro : Preferences : Key commands
    In the Options menu select Collapse All.
    Click on the triangle next to Step Input Keyboard. You can assign key commands to each of these elements in the Step Keyboard by selecting a command and clicking on Learn by Key Label. Then type the key command you want to assign to it.
    JG

  • Step "Start" is not connected properly in Visio

    Hi All,
      I have designed a workflow with 4 steps like start. process, approve, stop via DM. I am getting the following error while saving the workflow design
      : Step start is not connected properly. I could not save the wrkflow design.
    Here am giving the start step properties :
    Name : Start
    Check Out records : No
    Duration Timeout : 1 wk
    Cc: Notification  :  [owner]
    Send Next step  : [Anyone]
    Split Job            : [Anyone].
    I have checked in the DM by selecting the record in the main table and righ clicking on that workflows->Add to job is also disabled.
    I have checked the same by closing visio but still "Add to job" is grayed out.
    Can anybody guide in the visio why am unable to save the
    workflow design and Add to job is disabled?
    Please help me out...
    Thanks & Regards
    Sireesha.

    Hi,
    Problem 1
    Please check if the start step of the workflow is properly connected to the next step.Connect it properly and save.
    Problem 2
    Add to job is disabled
    to resolve this problem go to workflow table in data manager select your workflow name in Records pane then go to Record Detail and check if the Active ="Yes" if not then assign Active="Yes".This will surely solve your problem.
    Reward if helpful.
    Regards,
    Vinay Yadav
    Edited by: Vinay Yadav on May 28, 2008 7:42 AM
    Edited by: Vinay Yadav on May 28, 2008 7:48 AM

  • Korean input keyboard not correct typing after ios7 upgrade at iPhone and iPad.

    korean input keyboard not correct typing at page after ios7 upgrade at my iPhone and iPad.

    Report this to Apple via
    http://www.apple.com/feedback

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • Apple keyboard not working properly

    I have had owned this wireless keyboard for over a year now. It has been working fine up into like 3 days ago when all of a sudden certain keys where not working properly. I disconnected the keyboard and tried pairing but it is not allowing for the pairing to go through. I also tried it on my ipad same keys where not working properly. Nothing was spilt on it. It just stop working right any suggestions

    Gabor-
    Try resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will probably need to re-pair Bluetooth with your keyboard and reconnect your WiFi.
    If that doesn't help, try resetting the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting doesn't hurt anything, and sometimes corrects mysterious problems.
    Fred

  • Internal Keyboard Not Working Properly Macbook 7,1

    Hi there, I have a macbook which I purchased on sale early 2011, version 7,1.
    I was using it today and many applications opened and the machine froze, so I turned of the machine. On turning it back on it came on in safe mode and I was unable to use the keyboard properly, in the sense that everytime I pushed a key say an "R", a N would come up or even a number. the function keys stopped working also. The "mouse" pad on the computer worked fine. If I push buttons on it now, they do absolutely nothing but the tracking mouse works fine.
    I rebooted it, but no difference. I have inserted a USB keyboard, and that works fine.
    I have:
    1. Tryed rebooting PRAM and SMC
    2. Followed troubleshooting on the Mac website for keyboard problems
    3. Installed Mac Mountain Lion and cleaned the hard drive and rebooted it with the new Mac Mountain Lion.
    4. Ensured sound and the mouse pad are not turned on.
    Again, the internal keyboard is not working properly.
    I am unsure what to do. I have not spiled anything on the keypad and there has been no trauma.
    Does anyone have any ideas? I am writing this using a Mac external USB keyboard.
    I am thinking it might just be worth buying another Mac, but I have only had this for 21 months.
    Any help would be apreciated.
    Much thanks

    Additionally to no sound available, I could only type capital letters. When I opened my MacBook Pro late 2008, I found the small cable loose, marked by the red arrow. Opened the safety mechanisem, inserted it again, closed the stirrup again, restart - everything fine again!  :-))
    Hope it helps somebody else - I lost hours troubleshooting the software...

  • Keyboard not working properly on HP laptop - Pavilion g series/Windows 8

    My Keyboard keys are not working properly on HP laptop Corei3 - Pavilion g series/Windows 8. Please I need help.
    Monty West

    Hi Monty12,
    I understand that you are having a problem with the keyboard key for your laptop. I will try my best to help you with this issue. To better guide you, could you please give me some more information.
    1. What is the Model Number of your laptop? LINK: How Do I Find My Model Number or Product Number?
    2. What operating system are you running on the laptop?
    3. Are the keys sticking?
    Please let me know and I will be happy to help.
    Thank you,
    I worked on behalf of HP.

  • Touch and keyboard not working properly

    hello there,its been one month i am using this laptop hp envy energystar 15-u201ne. i have an issue on touch and keyboard..sometime when i am typing there is no effect in screen from keyboard. and sometime the touch is not working properly. how  can i fix this issue..?

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-u201ne x360 and issues with the TouchScreen and the Keyboard not functioning correctly. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. If you need it here are links to troubleshoot the Touchscreen and the Keyboard. I hope this helps. Thanks.

  • -wap-input-format not working properly in Nokia 58...

    I didn't know where to report this bug, so I'll try here.
    When you create web pages for mobile use you can set various input formats in form elements.
    This helps the user by setting up and validating input even before it reaches the server.
    One of these is the "-wap-input-format".
    I recently ran into a problem with at page that I couln't access from my Nokia 5800 and I decided to figure out why.
    The page has an input field like this:
    <input name="somenumber" type="text" style='-wap-input-format: "10N"' />
    (Which basically tells the phone that in this field you can only enter 10 digits.)
    However, even when I enter exactly 10 digits, the field turns red, and the phone refuses to continue until I "correct my error". The only input that the phone will allow is an empty field.
    However... if the field is made like this:
    <input name="somenumber" type="text" style='-wap-input-format: "NNNNNNNNNN"'/>
    everything works just as it should.
    But... the first type is also correct according to standards and should work too.
    My phone has the V21.0.025 firmware. (and no new updates available yet for this product code.)
    Does anyone know where this bug can be reported, or if its fixed in newer firmware?

    The solution is NOT changing the webpage. The page already follows the correct standard! 
    It its the browser in the XM5800 that has a problem. My example clearly shows this. The phone acts inconsistent depending on the syntax in the wap inputfield. Both of the above syntaxes are supposed to give the same result. But one works, and the other, which is probably the one most often used, does not work at all.
    Right now I use the Opera browser instead to access that page.(Because Opera does not have this bug.)
    My post was simply an attempt to notify Nokia of this problem...  Because I can't find any place to report bugs.
    And at the same time ask users who have the newer version of the firmware, if they know if this problem still exists.
    Message Edited by Timod on 08-Nov-2009 09:04 PM

  • Late 2011 MacBook Pro (Mountain Lion 10.8.2) backlight keyboard not functioning properly?

         I have a late 2011 MacBook Pro running OS X Mountain Lion 10.8.2 and for some reason, the automatic backlight keyboard will not funtion as it should. When I have the "Adjust keyboard brightness in low light" option enabled in settings, and I turn on the lights, my backlight keyboard stays at full brightness. Then, when I turn off the keyboard, then the lights, the keyboard does not turn on! Correct me if I'm wrong, but I am pretty sure that this was a feature in the MBP lines.

    Try a SMC reset.   Shut down the computer. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. Release all the keys and the power button at the same time. Press the power button to turn on the computer.   Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Keyboard not working properly

    Hi there,
    I have problem with my keyboard since yesterday.
    For certain letters or numbers by pressing them it types several characters. I didnt spil liquid on it and i cleanead it from dust and crumbs. Letters are not in the same area on keyboard.
    I tried to download the original notebook keyboard drivers but for my lap it couldnt find it so i guess i already have them.
    My laptop version is HP Pavilion 15-e081sa Notebook PC.
    So, if anyone have idea how to solve it, i would be very grateful.
    Cheers
    This question was solved.
    View Solution.

    Hi,
    While this could be a hardware issue, it's always worth trying the following.
    Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
    Shutdown the notebook.
    Then unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • What to do with a psd image in Modified folder that I can't see.

    With an original jpeg image I modified the image in PSE (which is set as default editor in iPhoto) using layers. I did a Save. The psd is in my modified folder but is not displayed by iPhoto. I understand that I should have used a Save As (eg to desk

  • Dynamically Selection Screen Change

    Hi Experts, I have 5 buttons on the application toolbar and on click of each button, i need to populate difference selection parameters. I have tried modifying the SCREEN table dynamically but maintaining SCREEN table for 5 different action seems ver

  • Reverted Java 6 plug-in stopped working

    My Java 6 plug-in (reverted from Java 7) won't work anymore. I've used the reverted Java 6 plug-in for a couple of months but a couple of days ago it stopped working. I know that Apple blocked Java in Safari but it doesnt work in Firefox either. I've

  • Passing multiple single values to a Planning Sequence

    Hi All,       We are using BEx Analyzer for  planning. We  are passing multiple single values for a single variable , to a IP-planning sequence.  Planning sequence is only taking the last value passed and ignoring the rest. Multiple variable values a

  • Question on use of NIO with je

    I saw the FAQ entry about NIO: http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html#24 Could you clarify the problems with NIO and situations it shouldn't be used? Currently we are using it with 3.2 and haven't run into any issues bu