Step is getting processed automatically.

Guys,
I am sending material number to different agents for editing like ( Purchasing agent, quality agent, sales agent etc).
Hv setup the workflow for the same.
while doing this, i hv setup 2 activity steps for each agent,
1)first step is to display the material to agent in display mode.
   so that, he can hv a look at current updates till now.
   Task Properties(Agent assignment, Task complete, confirm end of processing activiated).
2) Second Activity step is to Edit his views, for example purchasing views.
   Task Properties(Agent assignment, Task complete, confirm end of processing activiated).
Now, the issue is,
As soon as user processes/displays the material & completes the first step.
second step is automatically processed & takes him to MM02 for editing.
we want the step to wait till user goes to SAP Inbox & process the workitem manually.
is it how it behaves normally OR am i missing any config as such............
Regards.
santosh.
Edited by: santosh koraddi on Jul 1, 2010 8:37 PM

You have to deactivate the Advance With Immediate Dialog in the details tab of Activity step of Edit Material and this will not happen.
By default this is checked.
Thnaks
Arghadip

Similar Messages

IDOCS Error - Not getting processed automatically

Hi All,
We are loading hierarchy for a Product from R/3 system using the standard datasource.
When we execute the info package, IDOCs are not getting processed automatically.
We are facing the below error message.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
No status record was passed to ALE by the applicat
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
Thanks in Advance
Regards,
Sachin

Hi,
This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
Hope it helps a lot.
Thanks and Regards,
Kamesham

ALE - Idoc not getting processed automatically, instead going fine in Debug

Hello All,
I have a problem with Inbound idoc processing.
IDoc settings were made 'immediate processing' in WE20, and the process code is set correctly and the attached of Z-Fun. module to process the idocs to process code.
The error in inbound side is as 'Function module not allowed: APPL_IDOC_INPUTI' 51 status. Am sure i have to do some thing with ALE settings.
Can some body help me with correction step or sequence of steps for this ALE process.
Thanks & Regards, Jilan

Hi Jilan,
Plz follow the steps:
ALE Configuration:
     WE30 - IDOC type creation
     WE31 - Create segment
     WE81 - Message type creation
     WE82 - Link IDOC type to Message type
     SE37   - Create Inbound Function Module
     BD51 - Maintain entry for Function Module
     WE57 - Maintain
     BD57 - Link Function Module, IDOC type and Message type
     WE42 Create Inbound Process Code
     BD67 - Link Process code to Function Module
     WE20 - Create Partner Profile
     BD64 - Display Distribution Model
     WE02 - IDoc List, Display all Inbound/Outbound IDocs
     WE14 - Outbound Processing of IDocs
     BD20 - Inbound Processing of IDocs
1st Step:   Create a Segment ( WE31)
         Segment is a structure for passing data in IDoc. It actually contains the IDoc data, just like the DDIC table/structure. Segment is created with all the required fields. Then Save it. But, to actually use this Segment, you have to Release the Segment, otherwise u cant use the Segment, by menu, EDIT--> Set Release.
         Now, if you want to do some change to this Segment, u cant, unless & until u Cancel the Release, by Edit--> Cancel Release.
2nd Step:   Create IDOC Type ( WE30 )
        After creating the Segment, now we have to create the IDoc Type. IDOC Type is like an envelop of a letter, which contains the data inside it, & also some more information like address. IDoc type can be Basic Or Extended.
       Basic IDoc Type: Using some SAP existing IDOC type (ex. MATMAS) or Custom IDOC type.
       Extension IDOC Type: When we need some fields extra to an existing IDOC type, then we can extend that Basic Idoc Type by another Segment. This is called Extended idoc type
3rd Step:   Create Message Type (WE81)
     Message Type is like the Postman for sending the Letter.
4th Step:   Attach Message Type to the IDOC Type (WE82)
5th Step:   Create a Function Module (SE37)
       Write the Processing logic in a Function Module.
6th Step:   Mention the IDOC Type, i.e, 0/1/2 (BD51)
7th Step:   Assign the Message Type, IDOC Type & Function Module (WE57)
8th Step:   Create a Custom Process Code (WE42)
9th Step:   Attach the Function Module to the Process Code (BD67)
10th Step: Execute Inbound IDOC s (WE19)
Example Function Module: IDOC_INPUT_ORDERS (Standard FM to create Sales Order).
reward is useful,
regards,
Tanmay

Automatic update of number ranges in FBN1 is not getting processed

Automatic update of number ranges in FBN1 (current status) level is not getting processed.
Tried posting a customer payment document in the system though number ranges are maintained for the year 2015 the number ranges are not overlapped last year all documents are closed but still the numbers are not been picked automatically in FBN1 kindly help in this issue

Hello Rajesh
Please verify if number ranges are maintained correctly, verify same using transaction OBA7. Also ensure that external assignment is unchecked in FBN1. Share screenshots if possible.
Regards
Aniket

HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process

Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

JohnCullison wrote:
For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

Process getting killed automatically

Hi
I am using jdk 1.5 and java processes are getting killed automatically on server. Processes were working on test servers. Is anybody facing the same issue or knowledge about the same.
Regards,
Niraj

Niraj,
Can you explain your scenario a bit more clearer.?
Mandrake

App pool is getting stopped automatically while running the web service created by publishing Orchestration

Hi All,
I have created a Biztalk application and published that as Web service. I created a App pool and assigned that as an Identity for the newly created virtual directory.
For the App pool I have set up the identity with a specific user id and add that user id under the Group IIS_USERS.
When I am browsing the web service I am getting Service Unavailable(HTTP Error 503) and App pool is getting stopped automatically.
I checked in the event viewer getting the following error:
Application pool WSOrchPool has been disabled. Windows Process Activation Service (WAS) did not create a worker process to serve the application pool because the application pool identity is invalid.
I am sure that user id and password is correct. the same user-id is added in all the Biztalk server groups.
Please let me know what can be the issue.
Thanks & Regards,
Joy

Hi Joy,
You need to ensure that the application pool identity is set to a valid account for the application pool to function.
Step by step explanation can be found at
Event ID 5057 — IIS Application Pool Availability
You can also refer similar thread as well at Use Domain Account as App Pool Identity
Rachit
Please mark as answer or vote as helpful if my reply does

Open Item not getting Cleared automatically

Dear Sir,
For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
Our business scenario is as below :
After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
Regards
B Mittal
Regar

PO number cannot be taken as sort feild hence the value is in blank always.
You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
reward if useful
sarma

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
Jagadeesh

Hi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>

Workflow Questions - How to execute the steps in a workflow automatically?

I am using MDM 5.5 SP6.
My Question is how to execute the steps in the workflow automatically. That means NO user interaction.
I have a simple workflow, Start- Process -- Syndicate - Stop.
When a new record added /updated/inserted this workflow will start automatically. The workflow inbox, the workflow status is u2018Receivedu2019 Step is u2018Processu2019. Now I have to right click on the record then u2018Next Stepu2019 then click on u2018Syndicateu2019 then workflow completes automatically.
How to execute the Syndication step automatically?. I donu2019t want to have any user interaction to syndicate these records.
Is this possible?
The reason for this is I want to do some field validation and based on the field validation some assignments then then I want to syndicate these records without user interaction..

Hi,
If you want to do some validations and then based on result assignments on some of the fields before syndicating, then you have to use workflow. Only syndication server will not fulfill this requirement.
you may try by making validation's automatic property as "Error". This way it will not allow to add any record not fulfilling validation. You can also try using calculated fields instead of assignment.
I am not sure if you can make your workflow fully automatic, because atleast one process step is must for any workflow, and process step means user action.
Regards,
Shiv

How to get process instance id

Hi,
We are invoking a long lived process from a client using Java API (EJB end point).
We are getting the JobId in return. Is there a way to get the process instance Id through API.
Searched a lot in the documentation. Finally inclining to query the table directlyTB_PROCESS_INSTANCE on LONG_LIVED_INVOCATION_ID.
Appreciate a lot if any expert point us to an API way of doing the same

We have tried to use the following approach to get process instance id right after invoking a process.
- Define an OUT process variable to contain process id
- A set value step right after invocation sets this out variable with process id variable value which is available by default
- InvocationResponse.getOutputParameters() to read the output variable
The problem is in the map returned by getOutputParameters() is not having our output variable , but just the JobId.
Anyone tried this before? Are we missing sometiing?
Any expert help is highly appreciated..

SAP Back ground Jobs getting cancel automatically

Hi All,
All schedule Background jobs getting cancel automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
Regards
Gyan

1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
error reports from work directory as per work process:---
wp 22 :Fri Sep 25 15:07:04 2009
A
A ABAP/4 Program SAPLSYDB                                .
A Source LSYDBU27                                 Line 7.
A Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
A Module $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
A Function DsqlErrorHandler Line 1986.
A COMMIT/ROLLBACK error on "DEFAULT" database connection..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
WP23: Fri Sep 25 15:06:05 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B   max_blocking_factor = 50, max_in_blocking_factor      = 255,
B   min_blocking_factor =   5, min_in_blocking_factor      = 10,
B   prefer_union_all    =   1, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   0,
B   convert AVG         =   1, alias table FUPD            =   0,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / []:X,
B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
wp 24:Fri Sep 25 14:33:10 2009
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
B ***LOG BZY=> unexpected return code 32768      calling DBACDS     [dbacds#2 @ 1225] [dbacds 1225 ]
B
*WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1308]*
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M ***LOG R47=> ThResFree, delete (001009) [thxxmode.c   1284]
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
B
B Fri Sep 25 14:47:04 2009
B Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
please let me know where i can send log file if req.
2)Check for the sm21/sm50 bgd wp traces.
Getting so may Tem se management errors.
Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
3)Check if the filesystem is full as you suggest no logs are being written.
File system having free space
4)Check if the user who has scheduled the job is locked ?
user unlocked
please help me to resolv this issue.
thanks
Gyan
Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM

Why does adding a PostUserMessage cause the call to the TestReport Callback step "Call Get Report Body" to be skipped ?

I am trying to add steps to my process model to send progress messages to my user interface. When I add these steps (Automation Call -PostUIMessage) I receive the message and can update the UI accordingly. However, then the step "Call Get Report Body" (in the TestReport callback) will not execute (it is reported as "skipped" in the Execution Flow column) and the report generated doesn't contain the test step result information. My guess is that the step isn’t executing because the precondition is evaluating to False. Any thoughts as to why the step doesn’t execute ?

When you add steps to your process model, make sure that results collection is turned off for the steps. Edit the step properties, select the "run options" tab, and make sure that "Record Results" is not checked.

Agents state getting changed automatically from NotReady to Ready

Agents state getting changed automatically from NotReady to Ready on random position during break time. Can some help me out?
UCCE version 8.5

Hello Ahmad,
Bug below describes a scenario where the agent is transitioned to the Ready state without manually changing it.
Also effects 8.5.
CSCty97770
Save Bug
UCCX: Agent Incorrectly Set To Ready After RNA On ICD Extension
Symptom:
A Unified Contact Center Express (UCCX) agent may transition to the Ready state without manual intervention.
Conditions:
This occurs when, while on a call on the personal line, the agent receives a consult transfer from another agent on the ICD line, does not answer this call and the call is disconnected by the calling agent. When processing this disconnect, the agent state is incorrectly transitioned to Ready even though the call is still in progress ...more
Details
Known Affected Releases: (2)
8.5(1)SU2 | 8.0(2)SU4
Known Fixed Releases: (1)
9.0(.96000.398)
Product: Cisco Unified Contact Center Express
Hope this helps,
Please rate helpful posts.
Thanks.

Step is getting processed automatically.

Similar Messages

Maybe you are looking for