Step (model) file for PXI-6251
I'm looking for a step file (model) for the PXI-6251 card.
Hi wantacobra,
National Instruments device step files as well as 2D drawings can be found here, however it seems that the PXI-6251 module is not listed specifically. However i have found a generic 68 pin PXI module step file (here is the link) unfortunatley R&D have not currently made a step file available for that particular module.
Kind regards,
Ben B.
Applications Engineer
National Instruments UK & Ireland
"I've looked into the reset button, the science is impossible!"
Similar Messages
-
Where can I find 3D model step files for PXIe-1073 chassis?
I need 3D model step files for the PXIe-1073 chassis. Does anyone know where I can get them?
Eduardo,
I again apologize for the extremely long delay. Our R&D department has completed your request, and it can be found online, here: http://digital.ni.com/hardref.nsf/websearch/99B2D43123FBABE1862578B60077848F?OpenDocument&node=20053...
Paul Davidson
Sound and Vibration Software Staff Product Support Engineer
National Instruments -
Error in Maintenance Optimizer in step "Select files for component "
Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
BogdanHi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
IB_SYST_CHK
S_USER_CHECK
REQUEST_IN_PROCESS
SOLUTION_ASSIGNMENT
PRODUCT_ASSIGNMENT
S_USER_CHECK
EMPTY_CONTAINER
SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali -
Data Modeler bug? - it keeps reporting missing physical model files
Hi,
I'm having a rather serious problem with the latest data modeler, Oracle SQL Developer Data Modeler 3.1.4.710. It keeps losing physical model files for some reason.
I started to notice that it was not generating all the tables in my small design. After hours of struggle I found multiple error messages in the log file:
2012-12-18 10:51:20,126 [Thread-71] ERROR XMLTransformationManager - Unable to load object from XML: C:\cygwin\home\Brian\codebase\models\data\Design\rel\395D160B-C7224B8EAD05\phys\D9582E4E-2ED963CB9D32\View\seg_0\A555DB9B-8864-9C0B-DCA8-BAC5231F55C6.xml
java.io.FileNotFoundException: C:\cygwin\home\Brian\codebase\models\data\Design\rel\395D160B-C7224B8EAD05\phys\D9582E4E-2ED963CB9D32\View\seg_0\A555DB9B-8864-9C0B-DCA8-BAC5231F55C6.xml (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:138)
at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
at oracle.dbtools.crest.model.metadata.XMLToObjectTransformer.transformToObject(Unknown Source)
at oracle.dbtools.crest.model.metadata.XMLTransformationManager.transformFromXMLToObject(Unknown Source)
at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openPhysicalModel(Unknown Source)
at oracle.dbtools.crest.model.metadata.XMLTransformationManager.openPhysicalModel(Unknown Source)
at oracle.dbtools.crest.swingui.browser.BrowserPanel$88.run(Unknown Source)
These messages appeared every time I opened my physical model (Oracle 10g).
After deleting and recreating the physical model the problem went away for a while. But after closing and reopening the design I started to see the errors again.
Has anyone seen something similar?
Regards,
BrianThanks Philip!
The workaround does the trick for the tables, primary keys and unique keys.
I have just observed that table level constraints show a slightly different behaviour.
Names show up like TCC5, TCC6, etc.
Seems the same problem as previously in SQL*Modeler forgets check constraint names
Is there a workaround for that problem too ?
I already noticed that there is no parameter NameChanged for a table constraint.
Enrico -
Steps to load the data by using flat file for hierarchies in BI 7.0
Hi Gurus,
steps to load the data by using flat file for hierarchies in BI 7.0hi ,
u will get the steps int he following blog by Prakash Bagali
Hierarchy Upload from Flat files
regards,
Rathy -
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?
-
Changes to be done in Assignment and WorkTerms file for loading 3-Tier employment model.
Hi Folks,
My understanding on Fusion HCM 3-Tier Employment model is that :
An Employee can have multiple WR records each with Multiple Work Terms and these Work Terms in turn can have multiple
Assignments tagged to them. Further, default assignment of the Employee is marked in the Assignment_VO file using
Primary_Flag=Y.
1) Can anyone please explain on what are the changes to incorporate in the WorkRelationship, WorkTerms & Assignment file for
loading WR data based 3-Tier employment model.
2) What are the scenarios that require loading F_CONTRACT_VO file for 3-Tier Employment model....
3) Can anyone share template of sample 3Tier WR data loaded in Fusion.
Thanks a lot in advance,
HEMANTI'll need to ask a colleague in HCM to comment on this, while waiting you may want to take a look at the following:
HCM Employment Model Primary Flags on HCM support forum
FBL most updated sample files - Fusion HCM v8 on HCM support forum
Oracle Support Document 1572625.1 (Data Migration And Integration Advisor: Oracle Fusion HCM)
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
Message 2100 not found; No message file for product=RDBMS, facility=UL
Hi,
I am trying to run sqlldr. But I got this message:
Message 2100 not found; No message file for product=RDBMS, facility=UL;
I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
Thanks,
MThansk, I really appreciate your help. This is the result:
AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Matt\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=Smith
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Matt
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
LOCALAPPDATA=C:\Users\Matt\AppData\Local
LOGONSERVER=\\Smith
NUMBER_OF_PROCESSORS=2
ORACLE_BASE=C:\oraclexe\app\oracle
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
OS=Windows_NT
Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
ared\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0602
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
36\
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Matt\AppData\Local\Temp
TMP=C:\Users\Matt\AppData\Local\Temp
USERDOMAIN=Smith
USERNAME=Matt
USERPROFILE=C:\Users\Matt
VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows -
Internal error has occurred. Check log files for details.
While configuring software library on OEM 11g grid control, i get the error as Internal error has occurred. Check log files for details.
On checking emoms.trc i see the following error
2011-08-08 22:15:13,298 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion checkAllSoftwareLibLocs.216 - AdminUtil:checkAllSoftwareLibLocs: No software libra
ry locations configured.
2011-08-08 22:15:13,320 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion handleValidateLocsSoftwareLib.1754 - AdminController:handleValidateLocsSoftwareLib
: ComponentException while fetching all software library locations from repostiory.
oracle.sysman.emgc.provision.component.ComponentException: Software Library location i
s not configured.
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:218)
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:146)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleVali
dateLocsSoftwareLib(AdminController.java:1746)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleEven
t(AdminController.java:397)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2011-08-08 22:24:58,397 [EMUI_22_24_58_/console/provision/admin/edit_sw_lib_dir_config
uration] ERROR svlt.PageHandler handleRequest.640 - java.lang.NoClassDefFoundError: Co
uld not initialize class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
java.lang.NoClassDefFoundError: Could not initialize class oracle.sysman.oii.oiip.osd.
unix.OiipuUnixOps
at oracle.sysman.oii.oiip.oiipg.OiipgFileSystem.getVolumeName(OiipgFileSystem.
java:615)
at oracle.sysman.eml.swlib.bitstore.FileBitStore.getFreeSpaceInKB(FileBitStore
.java:1044)
at oracle.sysman.eml.swlib.LibraryServiceImpl.getFreeSpaceInKB(LibraryServiceI
mpl.java:1572)
at oracle.sysman.emgc.provision.impl.component.SoftwareLibraryImpl.getFreeSpac
eInKB(SoftwareLibraryImpl.java:2582)
at oracle.sysman.emgc.provision.impl.component.ComponentManagerImpl.getFreeSpa
ceInKB(ComponentManagerImpl.java:664)
at oracle.sysman.emgc.provision.ui.model.admin.SoftwareLibContext$OkButton.han
dleClickEvent(SoftwareLibContext.java:860)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleEvent(AbstractProvisioningPageHandler.java:427)
at oracle.sysman.emgc.provision.ui.controller.admin.SoftwareLibController.hand
leEvent(SoftwareLibController.java:53)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Hi, I followed all the steps correctly and also the owner of the directory is correct.
But i have not installed the patches which is listed at the bottom of the link page.
I had done this on RHEl and i had no problem but now i am getting problem on solaris. -
This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected] -
Need to generate a Index xml file for corresponding Report PDF file.
Need to generate a Index xml file for corresponding Report PDF file.
Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
This is generating pdf successfully.
As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
Please see the following attached sample file .
PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
In R12 ,
We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
docProc.process();
PrintInvoiceThread :
out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
out.print("<xapi:requestset ");
out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
out.println("</xapi:indexfile>");
out.println("<xapi:document output-type=\"pdf\">");
out.println("<xapi:customcontents>");
XMLDocument idxDoc = new XMLDocument();
idxDoc.setEncoding("UTF-8");
((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
idxDoc = null;
out.println("</xapi:customcontents>");
In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
Is there any similar java library which do the same thing in fusion .
Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
Section 7.11.3.2 Invoking Processors with InputStream .
But this is not helping much to me. Is there any other document/view-let which covers these thing .
Appreciate any help/suggestions.
-anjani prasad
I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
PrintInvoiceThread
InvoiceXmlBuilder
Control.javaYou can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/ -
Is there a way to create a .dmg file for a DVD inserted into the system
I am wondering if Snow Leopard has integrated any tools that can create a .dmg file for the CD or DVD inserted into the system?
If not, any recommendations for freeware 3rd party tools? ThanksInsert the disc you want to create the .dmg from, then choose the disc in the left hand pane of Disk Utility. From the File menu, choose New > Disk Image from (name of disc).
EDIT: This is basically how it's done; however, there may be other steps involved, depending on the type of disc you're trying to copy and what your goals are with the .dmg. If you provide more details about what you're trying to achieve, maybe we can help you further.
Message was edited by: Tuttle -
Is there a way to create file for ebooks and print?
Hi folks,
I have been looking around online for information on how (or even if it's possible) to set up book on InDesign that is suitable for producing a print-ready PDF and also being suitable for producing epub and/or mobi files for submission to Amazon, etc.
So my first question is whether or not it's technically possible (and efficient) to do that. I thought it would be great to have each book (with all its subdocuments) set up once, and from that I can produce the PDF I sent to the printers, and also product ebook files.
If it is possible, can anyone point me in the right direction for instruction (i.e. best practices, steps, etc.) for this?
So far what I am turning up online is info on how to set up a book for ebook product OR the usual info on how to set up books for print production. But I've not yet found anything that covers doing both at once.
Thank youThis is not an easy task, but if you plan beforehand, I think it's feasible to mantain a "master" file, both for print and ePUB. It really depends on the complexity of your layout. For already laid out docs, this could be a real problem.
Nonetheless, it's not a very efficient/scalable approach at all. There's no escape from heavily editing the ePUB XHTML code (and images) after export. Kindle files are another story, but you can generate them from your finished ePUB – with more code editing, of course.
Some links/docs to get you started:
http://bit.ly/Ylxjvo | http://bit.ly/WCBrYC | http://bit.ly/VxKoVo | http://bit.ly/vQ5Ty5 -
How to make .jar file for a multiple class program
I have a code for a chat room that contains two folders , one for Server and one for Client
What I need is to create a jar file for the server and a jar file for the clients
but here the first problem , I have a file that named (SocketMessengerConstants.class) that is located outside the two folders and is being read by the two projects .
I mean the server uses it while running and the client uses it too .
the second problem is : I don't know how to create a jar file at all !
please tell me how to do it in detail
Thank youChuckBing wrote:[Packaging Programs in JAR Files|http://java.sun.com/docs/books/tutorial/deployment/jar/index.html]
I tried to read this tutorials before I come here but I couldn't understand it
can you please tell me a specific steps to follow instead of the explaining .. because I understand the explanation but I can't apply it -
Not able to create EAR file for WAR file extracted project
Hi Experts,
I am trying to import a WAR file, make changes to the project and create an EAR file for the same. I am not able to remove import
errors despite of adding required jar files to it.
Also, I am not able to create an EAR file for the same.
I have copied the steps here with screen shots. Below are the steps :
Import WAR file in NWDS 7.3 – Enterprise Portal perspective
Select WAR file to create WAR and EAR project for it.
Project created with import errors. e.g – com.sapportals.portal.prt*
Found jar file from Class – target jar file table.
e.g – for Class com.sapportals.portal.prt.resource.IResource needed jar file is tc~epbc~prt~api.jar
Copied required jar files in WEB-INF -> lib folder.
Configure Build path and Add External jars.
Portalapp file screen shot
I think errors should go now, but they still exist.
Next I right click on WAR project and tried updating related EAR project.
Next, Export EAR file from EAR project.
I have tried both EAR types.
But EAR file is not created.
Please help me in removing the errors.
Thanks in advance :-)
Anubha PandeyHi Anubha,
I feel that you're missing JAR dependencies and hence not able to resolve the above import errors.
Please go through the below thread for the AFP Masthead customization and follow the same:
How to download and change AFP Masthead on SAP Portal 7.3
Hope, this will help!!!
BR,
Anurag
Maybe you are looking for
-
How can I delete an app that doesn't appear on my screen?
My tapped out app doesn't appear on my home screen and I can't find how to delete it. The app will not work. Every time I try to access it I get the message that it 'cannot connect to server'.
-
I downloaded a book and now it won't open. Also I am unable to close ibooks. Can anybody help?
-
Help bootcamp windows 8.1 Macbook Air 2013
I have a Macbook Air 2013 running Mavericks and I want to install windows 8.1 on it but first im getting a message saying that the iso is not 64-bit and im so confused because it partitoned my harddrive aswell so how do i get that back.
-
Last photos I imported show only titles, no photos. As I scroll down I see them appear
The last roll of photos I imported don't display. As I scroll down the page I see the bottoms of them but they disappear. Only the titles & IMGP # displays.
-
Why can't I see my media in the left sidebar when using finder?
I recently made the switch to Mac and I have some confusion. When using finder, I am not getting an option to browse through my media such as photos, videos and music. How do I get these folders to appear on my sidebar? Thankyou.