Step property in Timer?

Hi.
I'am trying to figure out how to work with the Timer control in Siena, and I read in other posts that there is a "step" property in the Timer control, but I don't see it on the UI. ¿Where I can change its value?
Thanks.
Antonio S.

The easiest way to get to Step is to toggle on Express View (Bottom Right).
Select the timer
Expand the options under Data (small arrow).
-Bruton

Similar Messages

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.

Did you try here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try on another computer to help determine if you have an iPod or computer problem.

Check/uncheck record results on more than one step at a time

I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

Hi Kevin,
Thanks for contacting National Instruments.
Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
regsvr32 TSEngine.dll
Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
David Mc.
National Instruments
Attachments:
ts2seqfiles.zip ‏4 KB

I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing.

I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!

You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html. I'm not clear on what you're saying about your backup. Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?

In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Create Index Step taking long time

I have a create index step in process chain for a infocube. The Create Index step is takes more time. The requests in this cube are rolled up and compressed. The batch process are also avaliable. But still the create index step takes more time. Any suggestions to reduce the time of create index step?

Hi,
If you have more Data in Cube then it will take some time..check any Dumps in ST22 and SM21. Ask Basis Team any Error messages in DB02 and check.
Else goto to RSRV
Tests in Transaction RSRV --> Database --> Database Indices of an InfoCube and Its Aggregates
Give Cube name and execute it and see the errors then if any RED color, ckick on Repaire Icon and see.
Thanks
Reddy

VI Works Single Step at a Time, But Not When Run Normally

I'm very new to LabView and have created a simple VI to record a single measurement from my HP 34401A Multimeter over an RS 232 connection.
The problem that I'm having is that the VI only works when I run it a single step at a time (clicking the single step button until it's completed). When I try to run the entire thing though, I get the following error:
Error -1073807339 occurred at VISA Read in Untitled 2
Possible reason(s):
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
After reading through the help page for that error, I tried adding a time delay, but that did not fix the problem.
(http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0)
NI I/O Trace didn't provide any answers for me, but I've attached a shot. Lines 1-13 are from the single step run, the rest are from attempting to run the entire thing at once.
Can anyone please help me understand what's going on here? Thanks in advance!
If anyone is interested:
Windows 7
LabVIEW 2009
HP 34401A Multimeter
RS 232 connection is through a USB-Serial adapter
Solved!
Go to Solution.
Attachments:
Front Panel and Block Diagram.png ‏112 KB
NI IO Trace.png ‏91 KB

The only thing I can think of is that you are sending the remote command and then not waiting long enough for it to complete. The manual states:
It is very important that you send the
SYSTem:REMote command
to place the multimeter in the remote mode. Sending or receiving data
over the RS-232 interface when not configured for remote operation can
cause unpredictable results.
And I think we are experiencing unpredictable results.
i don't know if you can change the command into a query by using the *OPC? command, but using that could solve it - or we could run into the same issue because of the caveat mentioned above. Maybe you have to put a manual wait in between the remote command and the write command.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

As The Username Implies Fios TV = A Step Back In Time....

After switching over from Dtv two weeks ago here in Syracuse, NY, all I can say is BUMMER. At this point I would have much rather kept paying the extra $100.00 a month I saved by bundling to see the programming I want. No MSG-HD, which I knew going in, but was under the assumption from talking to the rep on the phone that Ranger games in HD would be carried via the Center Ice package. To my disappointment, not only is there no MSG-HD on Center Ice, but Center Ice only carries ONE!! HD broadcast an evening ??? Are you serious??? Please tell me this is some sick joke before I start spreading the word to my co-workers and friends to avoid Fios TV. Is there a problem with Verizon Fios carrying HD channels?? All I can say is wow, major, major disappointment. HD Sports packages and programming on Fios is like stepping back in time to the caveman era, what a regression I've made. Is it to late to cancel my Fios Tv and switch back after two weeks? Any and all help appreciated.

I switched from ____________ . I am soooo disappointed.... _______is a let down from _____________, HD channels and free movies on demand. I got suckered... by the __________marketing and one of my know-it-all relatives!! I'm giving serious consideration to never speaking to him again!!!
Bottom line is that ________ cannot compete with _________ yet in programming. No contest! Sure... better quality video and audio. BUT, I want my choices and so much more HD.
I am seriousl;y considering switching back... this weekend. Even if it costs me a few bucks.... I am very disappointed with ___________ and I won't be back...
Not saying that your not correct and I'm just re-using your post a little. but I blanked out the names of the companies.
Now you can put this on any companies site and fill in the blanks with the company of your choice and you will see the same thing on every company out there.
====================================================================================
Error exists between keyboard and chair.

What is step by step in real time project i.e. end-to-end life cycle?

what is step by step in real time project i.e. end-to-end life cycle?

Hi Vamsi,
The below explanation gives you an idea of what is going to come after what in a software development.
These below stages are know as Software Development Life Cycle/Waterfall Model.
1. System/Information Engineering and Modeling
As software is always of a large system (or business), work begins by establishing the requirements for all system elements and then allocating some subset of these requirements to software. This system view is essential when the software must interface with other elements such as hardware, people and other resources. System is the basic and very critical requirement for the existence of software in any entity. So if the system is not in place, the system should be engineered and put in place. In some cases, to extract the maximum output, the system should be re-engineered and spruced up. Once the ideal system is engineered or tuned, the development team studies the software requirement for the system.
2. Software Requirement Analysis
This process is also known as feasibility study. In this phase, the development team visits the customer and studies their system. They investigate the need for possible software automation in the given system. By the end of the feasibility study, the team furnishes a document that holds the different specific recommendations for the candidate system. It also includes the personnel assignments, costs, project schedule, target dates etc.... The requirement gathering process is intensified and focussed specially on software. To understand the nature of the program(s) to be built, the system engineer or "Analyst" must understand the information domain for the software, as well as required function, behavior, performance and interfacing. The essential purpose of this phase is to find the need and to define the problem that needs to be solved .
3. System Analysis and Design
In this phase, the software development process, the software's overall structure and its nuances are defined. In terms of the client/server technology, the number of tiers needed for the package architecture, the database design, the data structure design etc... are all defined in this phase. A software development model is thus created. Analysis and Design are very crucial in the whole development cycle. Any glitch in the design phase could be very expensive to solve in the later stage of the software development. Much care is taken during this phase. The logical system of the product is developed in this phase.
4. Code Generation
The design must be translated into a machine-readable form. The code generation step performs this task. If the design is performed in a detailed manner, code generation can be accomplished without much complication. Programming tools like compilers, interpreters, debuggers etc... are used to generate the code. Different high level programming languages like C, C++, Pascal, Java are used for coding. With respect to the type of application, the right programming language is chosen.
5. Testing
Once the code is generated, the software program testing begins. Different testing methodologies are available to unravel the bugs that were committed during the previous phases. Different testing tools and methodologies are already available. Some companies build their own testing tools that are tailor made for their own development operations.
6. Maintenance
The software will definitely undergo change once it is delivered to the customer. There can be many reasons for this change to occur. Change could happen because of some unexpected input values into the system. In addition, the changes in the system could directly affect the software operations. The software should be developed to accommodate changes that could happen during the post implementation period.
Reward if helpful.
Thankyou,
Regards.

TestStand jump to step at edit time

Hi,
In the File Diff/Merge tool, you can click on a step, and jump to it in the TestStand editor. Is this a command that I can use myself? I tried looking through the API but I couldn't find something that I thought would work.
I attached an image from the file diff tool to show you what I mean.
So, I'm wondering if its possible to get similar functionality for jumping to a particular step at edit time.
Thanks!
Attachments:
filediff_goto.png ‏67 KB
ts_result.png ‏32 KB

Thanks James. I think I'll have to put this on my "someday" list for now, little bit more to it than I perhaps was expecting.

TS1559 my ipod touch 1g upadate now 3.1.3 but my wifi still Greay Out . i am following this steps lot of time but not result . please tell me 100 % solution of greayed wifi ! please

my ipod touch 1g upadate now 3.1.3 but my wifi still Greay Out . i am following this steps lot of time but not result . please tell me 100 % solution of greayed wifi ! please

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Config steps for one time customer

hi,
sap gurus,
can i have the configuration steps for one time customer.
regards,
balaji

Hi,
One-time customers
Customers who only enter into a business transaction with you once are called one-time customers in the R/3 System. It is not necessary for you to create a customer master record for individual one-time customers, since you no longer need this master record after the business transaction has been carried out, and it would use up storage space. You create collective master records for one-time customers.
Use
A collective master record refers to a dummy customer and includes only the data that is identical for a certain group of customers.
You create a collective master record for all customers in a certain region. This collective master record could include fields such as:
Master record name
Language
Currency
Sales office processing the customer data
If a one-time customer from this region orders goods from your company, you use the customer number of your collective master record when processing the sales order. Only in the sales order itself do you enter the address and all other data not given in the collective master record.
Structure
When you create a collective customer master record for a one-time customer, the account group CPD for one-time customers is automatically proposed by the system. This ensures that you can access screens from different partner functions (sold-to party, ship-to party, bill-to party, and payer) relevant for one-time customers. However, only fields that can be identical for all one-time customers are displayed. For example, all address fields are suppressed, since the master record is collective for data on several customers, all of whom can have different addresses.
On the following screens you can enter a limited amount of data in a collective master record for one-time customers:
Address
Sales
Shipping
Billing
Messages
Integration
The account group can restrict the number of screens accessed in the collective master record for one-time customers even further. If only some of the screens and fields for one-time customers are relevant for your company, change the account group CPD or set up a new account group. This is done in Customizing for Logistics Basic Data: Business Partners in the activity Define Account Groups and Field Selection for Customers.
regards
sadhu kishore

Workflow step executed mutliple times

Hi,
I have takena copy of the standard PO release WF and added an email step so that once the PO released step has been actioned, and email is sent to the initiator informing them that the PO has been released and attaching the PO document. The problem is that depending on the release code then multiple approvers need to release the PO, so this email step can be triggered multiple times. So how do I configure the step to only release once all the approvers have completed their WF task?

Hello,
Check in SWEL if there's a particular event that gets created when a PO is finally released (perhaps RELEASED) and have a branch wait for that in the workflow. If it occurs, then send the email. If it doesn't occur (after a few minutes) then complete the workflow. That's just one way to do it.
regards
Rick Bakker
hanabi technology

Step property in Timer?

Similar Messages

Maybe you are looking for