Step results not appearing in report

Hello. New to TestStand. I've creted a String Value Test that compares the UUT Serial number using RunState.Root.Locals.UUT.SerialNumber. However, when the report is generated I see no step results. This is only happening with this sequence and not with any of the tutorials. Can anybody point me in the right direction for this. Thanks.
Solved!
Go to Solution.

Here is the sequence file and the LabView vi I'm using.
Attachments:
Serial Content.seq ‏7 KB
String Value Test.vi ‏14 KB

Similar Messages

GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

GL & PC description not appear in report painter (ECC6)

Dear Expert,
kindly help me on this issue. GL description and Profit Center description not appear in report using OFL Table.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Results are not appearing in report

Hi All,
When user ran the report, it gives below error.
A general error has occured[nQSError:1207]Unexpected socket read timeout: connection terminated by network, e.g. by the firewall.
But when ran the query in the backend it fetching the results and in criteria it contains SET OPERATOR with UNION,but not appearing the results in report.
Regards,
Niranjan

Hi, Thanks for your response...
When i ran the report with diffrent/default combination then i am getting the results.
In my criteria SET operator is used for combining of similar request and we have diffrent filter conditions and dashboard prompts also.
Connection from back end is fine,because iam able to get other report results also.
Regards,
Akkapeddi

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Intrastat report Spain. Credit memos posted not appearing in report

Hi
I have a issue where the debit notes raised to vendor are not appearing in Intrastat declaration.
How this debit and credit notes must be taken by Intrastat ? This problem is there since the Intrastat report is being used.
Is there any specific configuration for this or
is there any period check because of which the debit notes are not picked?
The reason is po was created in Feb 2009 and continuous GR and invoice postings happened in subsequent months which are all captured in Intrastat report. A debit note was raised in Sep 2009 which does not appear in the report.
Request your expertise and help to resolve this issue.
Thank you

credit memos are not supported in SAP as you can read in docu:
http://help.sap.com/saphelp_sbo2005ao/helpdata/en/F3/4392579F5DC24E9FBE2FA84E9E7660/frameset.htm
Please read the local Intrastat guide, in many countries it just says that you have to file a correction per paper form to your statiscal office.
SAP explains this as well in OSS note 374682:
If a credit memo refers to a billing document which was already declared to authorities, proceed as follows:Here, you should create a written correction to the statistical office.Specify a data record to which the credit memo refers.
Check the documents of the statistical offices for information on when you have to declare the credit memo (limits for values and quantities).*********************************************************************

To Do List item not appearing in Reports

Has anyone had success in implementing the To Do List? I followed the instructions posted on Adobe (written by Peter Grainge):
Create a New To Do item (or Edit an existing one)
Check it as completed for a topic
Add To Do List to the items that will appear in a report
Generate a report
The To Do item does not appear in the report.
There's also no indication in the help about whether you can create new items AND edit existing ones (or just one), and if there is a limit to the number of items allowed. Seems like I remember seeing/hearing about certain restrictions of that type when the feature was initially announced.
Leon

Are you referring to something I posted here or on my site?
This bug was reported a few weeks back and I believe it was reported. However, the more people who report it affects them etc...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
See www.grainge.org for RoboHelp and Authoring tips

Cost elements not appearing in report

Hi,
We have reports done in report painter. we use cost element group to retrieve the amounts posted to that group.
I added 2 more accounts to the cost element group and saved.
but it is not appearing when I run the reports which shows cost element wise amounst for teh period.
rgds
Neha

Hi sanjay,
thanks.
But GR53 gives me Library and report group.
when i go to GRR2, gives the library I see in GR53, and search report group in list of values ,
I am not able to see the report group as above.
When I manually type in it says
Report Y511 does not exist
Message no. KH 502
Diagnosis
You tried to change a row/column structure which does not exist.
Procedure
Choose an existing row/column structure or creating a new one using
    'Row/column structure' -> 'Create'.
Pl advice.
thanks
neha

Plan next yrs values not appearing in Report Painter

Hi,
In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
Basically this column should show next years plan values for WBS Element cost elementwise.
When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

Hi,
Thanks for reply.
Characteristics are:
Value Type: ZCJUL01
Value Type:10
Version:6-VERP
Period: 7
Valuation:0
Object ind.:1 to 5
Object ind.:P
Fiscal Year: Z-GJHNJ Next Year to 2999
I think it looks like wrong Period selection characteristics value.
Please suggest/guide what has to be done?
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

Quiz results not appearing in email body

Using Captivate 2, I set up a quiz that is supposed to send
its results to e-mail. In the Quiz Manager, on the Reporting tab, I
have the following settings:
Enable resporting for this project (checked)
LMS: email
Report Pass or Fail: report status as defined by report data
Choose report data: report quiz results and slide views
Report score to LMS as: score
Reporting Level: report interactions and the score
Then I publish my project. When I run the .htm, no e-mail is
generated. The only way I can get an email to generate at all, is
if I click on the Pass/Fail Options tab in the Quiz Manager, and
set "If passing grade:" action: send email to: (the email address).
This does generate an e-mail, but the body is blank, with no
results reported within (even though I specifiying that I want the
data in the above settings).

I'm trying to do the same thing... having set up a small
quiz, a pass mark, and asking for an email to show the score only,
nothing is generated running it locally. But after uploading to my
server and running it from there I do in fact get an email. The
data is in an attachment POSTDATA.ATT which Windows doesn't know
how to open. But if you change the extension to csv then XL opens
it fine and reports as requested. The user is identified by the
sender of the email.
HTH

How to prevent step status from appearing in report

How can I prevent the the rows containing step name (Settings) and Staus (Done) from appearing in the report?

Hi xiv015,
If you do wish to change the formatting of the report, then you will have to do some report customization. If you just want to leave out the steps with the Done status and keep the same report formatting then you can use Result Filtering exactly as Teds described above. In Teststand go to Configure»Report Options and enter the expression Teds described in the expression box. This will not include the steps with status equal to "Done" in the report.
Justin D
Applications Engineer
National Instruments
http://www.ni.com/support/

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

Results not appearing in email

I am having a problem with the email not displaying or
attaching results. I have checked all parameters in the quiz
preference so that is not the problem. here is what happens:
1. I press send email
2. I get the warning window that the it is attepmting to send
an un ecrypted email. I hit ok
3. I get another warning window that says it wants to open
outlook (my default mail handler) which is casued by my pc running
in protect mode.
4. I allow it and after hearing a few clicks... my new email
window opens with nothing in it but the To: address and the subject
filled with the date.
I have tried disabling protect mode but I get same result.
I am using Vista 32bit, IE7, Outlook 2007, Captivate 3
Can someone please help.

Welcome to our community, gillt40
If there were a single issue that seems to have plagued
Captivate, you have hit it. E-Mail reporting is so far from
reliable it isn't funny. The unfortunate part is that there are no
answers. There is no magick solution for it. No setting you can
tweak or forgot to turn on. It's all hit or miss. And judging from
the posts I see here day after day after day that report the same
thing, it's mostly miss.
The fact of the matter is that the only really reliable
reporting you will find is if you use a Learning Management System
(LMS) as that was how Captivate was designed to work best.
Sorry, but all I can do is tell the truth. Then stand back.
Cheers... Rick

Activity result not appearing

Hi,
Activity result is not reflecting even after i created entries in industry specific area in SPRO. CRM> Tramsactions> Activities-->industry specific entries
Can any one help me with a detailed procedure...
Regards,
AR

Hi AR
Go to SPRO --> CRM
Transactions --> Define activity reason --> Define code group profile
For ex. If you are using A2, select A2 and you can see all the code groups assinged to it
Each code group has different codes with in it.
In definition of code group profile you can define all the code groups that are applicable for tht profile. For ex. you can select ACT000001 and see all the code groups that are applicable
Now go to define subect profile. For example ACT000002
You can assign catalog A2 and code group profile ACT000001 to this. You will be able to see all the code groups too.
Now go to transaction customizing for activities and assign status and subject profile for each transaction type
Here you mention for your trasaction type and for different status the subject profile that is applicable. Ex 0001, E001 with ACT000002.
You now will be able to see all the different reasons which will appear as combination of code groups and codes
Rgs

Step results not appearing in report

Similar Messages

Maybe you are looking for