Step wise installation on red hat as 4 and patches

hello,
plz send me step wise step oracle 9i installation on red hat AS 4 and required patches.

If anyone has such a beast, it'll be either Werner (http://www.puschitz.com) or Ivan (http://ivan.kartik.sk/)

Similar Messages

  • Oracle 10g database installation in red hat 5

    what are the packages needed for oracle 10g database installation in red hat 5?
    what do you mean by yum way of installation?

    Check on the release notes for your platform
    This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
    then go to the official doc installation of 10gR2 on x86-64 Linux
    http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
    Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
    There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
    - Karl Arao
    http://karlarao.wordpress.com/

  • Issue with OHS (EPM) installation on Red Hat 6.4

    Hello Gurus,
    We are facing an issue with the installation of Oracle HTTP server which comes with EPM 11.1.2.2 using EPM Installer on Red Hat 6.4.
    When I select the OHS product it says, that the Oracle software is not certified on the current operating system, however it does not happen with any other product in the suite
    Is Red Hat 6.4 64 bit not a supported OS?
    I have installed all the required libraries mentioned here:  Oracle® Fusion Middleware System Requirements and Specifications
    Also my NPTL version is 2.12 which is higher than 2.3.4 as mentioned here: Oracle® Fusion Middleware System Requirements and Specifications
    Any help will be highly appreciated.

    John,
    My installation went smooth, however when I start the configuration (Oracle Database) I am getting the following error while configuring the shared service registry:
    Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details.
    My DBA says that he has provided all the following privileges to the schemas.
    CREATE SESSION
    CREATE VIEW
    CREATE TYPE
    CREATE TABLE
    CREATE CLUSTER
    CREATE TRIGGER
    CREATE SEQUENCE
    CREATE INDEXTYPE
    CREATE PROCEDURE
    CREATE ANY SYNONYM
    DROP ANY SYNONYM
    UNLIMITED TABLESPACE
    configTool has the following exceptions:
    [2013-09-10T10:44:53.748+05:30] [EPMCMN] [WARNING] [EPMCMN-01001] [oracle.EPMCMN] [tid: 10] [ecid: 0000K46JlSgAXNIMyqqYMG1IBegW000002,0] [SRC_CLASS: com.hyperion.cis.utils.oui.OUIUtilImpl] Failed to determine home via OUI: [[
    oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraInst.loc is either not readable or does not exist
        at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1855)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
        at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
        at com.hyperion.cis.utils.oui.OUIUtilImpl.inventoryTemplateMethod(OUIUtilImpl.java:289)
        at com.hyperion.cis.utils.oui.OUIUtilImpl.findEpmOracleHomeFromInventory(OUIUtilImpl.java:67)
        at com.hyperion.cis.utils.oui.OUIUtilLinkageErrorProtectionWrapper.findEpmOracleHomeFromInventory(OUIUtilLinkageErrorProtectionWrapper.java:18)
        at com.oracle.preconfig.impl.InventoryPreConfigCheck.executeCheck(InventoryPreConfigCheck.java:23)
        at com.oracle.preconfig.PreConfigCheckTemplate.execute(PreConfigCheckTemplate.java:9)
        at Main.runPreconfigChecksAndExitIfFail(Main.java:142)
        at Main.main(Main.java:90)
    com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
        at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:354)
        at com.hyperion.hit.registry.RegistryUtils.initUpgradeRegistry(RegistryUtils.java:272)
        at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:105)
        at com.hyperion.hit.registry.Registry.createBasicComponents(Registry.java:2305)
        at com.hyperion.config.document.Storage.initRegistry(Storage.java:245)
        at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:384)
        at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:228)
        at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
        at java.lang.Thread.run(Thread.java:662)
    Caused by: java.sql.BatchUpdateException: error occurred during batching: ORA-01950: no privileges on tablespace 'HYPSS_DATA'
        at oracle.jdbc.driver.OracleStatement.executeBatch(OracleStatement.java:6390)
        at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:248)
        at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:344)
        ... 8 more
    Any help will be highly appreciated.

  • Oracle 10GR2 Installation Error Red Hat EL4

    Hello,
    I'm currently installing Oracle 10GR2 on Red Hat EL 4 and I get an error when
    i'm 62% (Oracle Net Required Support Files 10.2.0.1.0). The error is the following:
    Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0
    /db_1/network/lib/ins_net_client.mk'.
    When I look the make.log file it shows this:
    /usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1/rm -f ntcontab.*
    (if [ "compile" = "compile" ] ; then \
    /u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
    /usr/bin/gcc -c ntcontab.c ;\
    rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
    mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
    /usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
    gcc: installation problem, cannot exec `cc1': No such file or directory
    mv: cannot stat `ntcontab.o': No such file or directory
    /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
    make: *** [ntcontab.o] Error 1
    My version of the gcc is 3.4.5-2

    read the oracle installation manual and install all recomended RPM then problem will resolved. binunit rpm is also required.
    i had got this problem and resolved by installing recomended rpms.

  • Need a installer for red hat

    I am on red hat linux 9 and i know that its not supported but i need an installer... can anybody tell me which installer do i need to install weblogic platform 8.1 SP3 on red hat 9
    do i need a generic installer ( if yes where can i find one)
    or will the platform 813_linux32.bin will work. also where can i find the jar file as i have installed previously with jar .,.. and i dont know if bin will work or not.

    well i just installed the file that i wrote an it works fine i guess.. it installed perfectly and the medrec application from quickstart works fine

  • BI 4.1 installation in  Red hat Linux 6.5

    Hi Experts,
    we are planning to have one cluster environment in Red hat Linux 6.5.
    1) Two nodes in cluster ( two red hat Linux 6.5 servers)
    2) 1 server with Websphere as a web application server.
    From the last two years i am completely working on windows environment. hence i would like to know few details about installing BI 4.1 in RHL 6.5.
    What are the prerequisites to install Bi 4.1 in RHL 6.5, Even though it mentioned in installation guides, i would request someone to share there real time expertise.
    I would like to have split deployment in the webapplication server ( Websphere ).I have performed the split deployement with ref of the below document which was created by James Rapp Improving the User Experience in SAP BI Platform - BI 4.1 and Apache 2.4 Supplement
            it completely talks about tomcat+ Apache.
    is it possible to perform the websphere + Apache split deployment.
    Kindly share your expertise.

    Hi Prasad,
    Below are my thoughts on your queries.
    1. Check Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step. This is an amazing blog by Brian. Hope you find it useful.
    2. You cannot do a split deployment with Apache and Websphere. However you can do it with IHS (Web server provided by IBM) plus websphere. If you are using Websphere Network deployment version, IHS must be installed by default. For performing the split deployment, check https://websmp206.sap-ag.de/~sapidb/011000358700000171102014E/sbo41sp3_bip_wapd_unix_en.pdf See section 4.4.2 on page 27
    Hope it helps.
    Regards
    Chinmaya

  • Oracle 9i installation on Red Hat Linux 9 URGENT

    hi,
    I live in london, I have tried a lot to install Oracle 9i Enterprise edition on Red Hat Linux 9, but couldn't do it, can any one help me to install it, I am ready to pay and visit any place in london for that purpose in the evening, if any one can help my mobiel number 07832 077672
    best regards
    asif

    If you are only trying to learn, I would recommend either Fedora FC4 or OpenSuSE 10, and I would recommend installing ORacle Express Edition if you do not need advanced Oracle stuff (or you are not learning for OCP).
    Again, use Werner's excellent site - http://www.puschitz.com or Ivan Kartik's site - http://ivan.kartik.sk/oracle/install_ora9_fedora.html to get good instruciton on installation.
    If you want a free version that is as close to a supported Linux as legally possible, consider using WhiteBoxLinux.org, TaoLinux.org or CentOS.org linux. These are clones of RedHat Enterprise (the one that is supported). Or you could contact Novell.com and ask for an evaluation kit for SLES9.

  • Oracle 10g Installation on Red Hat Linux

    Hi
    I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
    # cat /etc/issue and the output is :
    Red Hat Linux Release 7.1 (Seawolf)
    Kernel 2.4.2-2 on an i686
    Then I am giving #uname -r and the output is
    2.4.2-2
    Now Oracle Installation Guide for 10g for Linux is saying that
    if the errata level is less than 25 on x86 system then install latest Kernel Updates.
    Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
    Thanks and regards.
    Keshav Tripathy

    Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
    For example the file contains:
    [Certified Versions]
    Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
    now to add your linux into it just check your version by issuing the command #uname -r
    in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
    The new ini file looks like:
    [Certified Versions]
    Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
    [Linux-redhat-2.4.20-8smp-optional]
    TEMP_SPACE=80
    SWAP_SPACE=150
    MIN_DISPLAY_COLORS=256
    Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
    Thanks & Regards,
    Rajesh Kumar
    Team Lead UNIX

  • Error in Oracle10gr2 installation on Red Hat linux AS4 (64-bit) itanium2

    Hello All,
    I installing oracle10R2 on Red Hat Linux 4 U4 Enterprise Server but got the following errors:
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer
    from /tmp/OraInstall2007-04-26_11_11AM. Please wait....
    [oracle@rx36 database]$ #
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # SIGILL (0x4) at pc=0x2000000000038a4070, pid=6102, tid=2305843009216825632
    # Java VM: Java HotSpot (TM) 64-Bit Server VM(1.4.2_10-b03 mixed mode)
    #Problematic frame:
    What should I do?
    Thanks.
    Message was edited by:
    user571878

    Hi,
    Please refer to following statement to do:
    =============
    How to install Oracle RDBMS version 10.2.0.2 (or higher)
    To install 10.2.0.1 and then 10.2.0.2 (or higher) on Linux Itanium, do the following :
    [1]. Download Patch 5390722 and run the supplied OUI to install Montecito JDK and JRE into the new 10.2 home
    * Unzip the patch
    * Start OUI from Patch 5390722 and install JDK into the new 10.2 home
    * Start OUI from Patch 5390722 and install JRE into the new 10.2 home
    [2]. Install 10.2.0.1 into the new 10.2 home by running OUI from the 10.2.0.1 DVD :
    ./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
    NOTE: During the installation (on the "Product Specific Prerequisite Checks" page) the "Checking for Oracle Home incompatibilities..." check will fail. Click the check box next to it, so that the status changes to "User Verified", and continue with the installation.
    [3]. Install 10.2.0.2 (or higher) into the new 10.2 home by running OUI from where the patchset has been unzipped :
    ./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
    Terry

  • 8.1.7 installation on Red Hat 6.2 failing on ins_rdbms.mk

    I get the following error:
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target install of makefile /db/CTM/rdbms/lib/ins_rdbms.mk
    Exception Severity: 1
    *** Cancel Dialog: ***
    This is not the only one. It fails on the demo make file as well.
    I have seen the malformed archive(JAR) in the log so I downloaded the 8.1.7 file again, compared the bytecount at least 5 times. Is there a bad file on the server?
    Please help. I must get a legacy report out of an application that only runs on 6.2 red hat (long story)
    thanks in advance
    [email protected]

    This link may help.
    http://staff.in2.hr/denis/oracle/815install_rh6x_en.html

  • BO enterprise XI 3.1 installer for Red Hat 4

    Hi,
    We have BO Enterprise XI installed on our Red Hat 4.0 [we have customized it according to our product] boxes.
    We want to upgrade to XI 3.1. Before buying the licensed version, we just want to take a look at upgrade process.
    From where can we get a trail version for XI3.1?
    Thanks,
    Divya

    You will get this by contacting SAP support.
    you need to have S user account and rights as well to download this.
    Thanks,
    Anil
    Edited by: Anil Bommu on Feb 17, 2010 6:18 PM

  • Oracle db installation on red hat 5

    hi e.body
    i am trying to install oracle 9i db on redhat 5. (all this setup is on virtual machine , i mean on windows xp i install vmware server then i install redhat 5 on this vmware. install this redhat on vmware with the help of ISO images. )
    the problem untill now is with RPM. i made YUM server on this redhat machine.
    i copy all the operating system source CDs in /var/ftp/pub. i use createrepo utility and made yum server.
    but some RPM r not installed.
    glibc-kernheaders \
    compat-db \
    compat-gcc \
    compat-gcc-c++ \
    compat-libstdc++ \
    compat-libstdc++-devel \
    gnome-libs \
    openmotif21
    these RPMs are not installed. how i proceed further. do i download these RPM from google.
    plz reply
    regards

    9i is not supported and certified to run on RH5.
    If You need 9i, then install it on RH4.
    but regarding package installation - if You have support agreement and are using redhat network then simply use yum utility.
    If You have somewhere rpm packages (install media or somewhere else in the networt), then
    rpm -ivvh package.rpm - this command will install package
    rpm -Uvh package.rpm - this one will update if You already have some older version of package.

  • Red Hat (Enterprise Linux) and Hewlett Packard

    Dear HP,
    You folks seem to have made a real effort to get your printer drivers out there to all. I applaud you. Enlightened self-interest.
    It is now 2014.
    You offer me drivers for my new Color Laserjet printer.  Red Hat offers me drivers for HP printers. The two files are incompatible. You guys are huge in printers and Red Hat is huge in Linux.  When poor schleps like me are drop $300 on a new printer and I can't get it running, I get pissed at both companies. Fairly or unfairly.
    Maybe someone at HP, preferably with a RHEL 6 computer OS, could fix this situation. If this is squarely in Red Hat's camp, then send them some hate mail.
    I had hoped we were past the era when you needed to look at your computer to see which printer it supports and then go out printer shopping.

    Hi,
    RHEL 4 is not supported by AIR runtime. OpenSuse 11.1, Ubuntu 9.04 and Fedora Core 11 are the supported distributions for AIR 2.0.
    That said, AIR 2.0 should work fine on RHEL 5.
    You can download the AIR 2.0 Beta runtime From http://labs.adobe.com/technologies/air2/
    -Praful

  • Red Hat Cluster Suite and Oracle RAC

    HI Guys,
    Our boss will plan to configure Red Hat Cluster Suite to replace to update oracle RAC.
    Are there some experienced expert to explain advantage and risk of Red Hat Cluster Suite v Oracle RAC 11.2
    Thanks
    Jin

    Hi,
    first of all Red Hat Cluster Suite cannot replace the RAC functionality. RAC is database Red Hat Cluster Suite, just provides clusterware. So all with what you will end up is a plain old failover cluster solution.
    So in maximum Red Hat Cluster Suite can replace the Oracle Clusterware. (But not below a RAC, since this is not supported and even with integration with other clusterware Oracle Clusterware will still be there).
    So what he will end up is also replacing RAC with single instance databases in a failover cluster solution, and with this will decrease a lot of RAC capabilities:
    => Rolling Upgrade (OS / Clusterware and some database patches)
    => Storage migration/consolidation
    => Fast failover (30 seconds vs. minutes).
    See www.oracle.com and you will find whitepapers with differences between failover clusters and RAC.
    http://www.oracle.com/technetwork/database/enterprise-edition/failover-cluster-134770.pdf
    But even if there are other justifications to reduce availablity (which actually can only be costs), I still wonder, why he wants to replace Oracle Clusterware - the clusterware shipped with Oracle is far more mature than the one from the Red Hat cluster Suite.
    And there is no better integration for Oracle databases in clusterware than what Oracle clusterware can provide.
    Even more so, OCW is a full capable clusterware and you can build your own failover cluster solution for free.
    The same would have to be done if he replaces it with redhat cluster.
    PS: If someone is providing failover scripts for Oracle in Redhat clusters, it will be Redhat (but I think you have to write them yourself).
    Regards
    Sebastian

  • ORACLE 8I Installation in Red Hat 6.0

    Two questions about the installation:
    1. How do I set up the Kernel parameters such as SHMMAX, SEMMNI in the RedHat Linux 6.0? This is the first requirement in ORACLE 8I installation.
    2. How do I mount the CD? When I use mount /dev/cdrom /mnt/cdrom to mount the CD,
    all the filenames are in upper case.

    I would suggest checking out the RedHat site as they have several whitepapers/HOWTO's that will step you through rebuilding your kernel. Search on "Custom Kernel".
    As far as the files names showing up in all caps....I have not seen this before and off the top of my head I'm not sure what could cause this problem. Good luck!

Maybe you are looking for