Steps After Installing JDI

Hello,
Step2 in the SAP NW JDI Installation Guide V1.39:
to set up Roles and Goups:
1) i didn'nt found on WAS 6.40 the UME Actions CMS.Administrate CMS.Display and CMS.Export ??
2) to create UME Groups i got the message:
"Could not create group because adapter is configured as read-only"
any idea ??
Thanks and best regards
HG

I had the same problem. I assume you're using an ABAP system with J2EE add-in. I submitted the question to SAP support and here is there reply:
For an add-in installation the group creation works a little bit different compared to the standalone installation type. -Since the UME Roles and the ABAP Roles are different objects, I will refer in the following to the "full name". Users, Groups and Roles in the referenced JDI_Inst_120.pdf refer to UME Users, Groups, Roles. UME Users are the same as ABAP Users. UME Groups are mapped to ABAP Roles. There is no correspondence to UME roles in the ABAP system. In an add-in installation UME groups can only be created in the ABAP stack as ABAP roles using transaction pfcg. Also, the (UME) User - UME Group assignment needs to be maintained with the ABAP interface (transaction su01 or pfcg as User - ABAP Role assignment). UME Roles must be created in the /useradmin Application, Java permissions needs to be assigned with the Visual Administrator of the J2EE.
This solved my problem. Hopefully it helps you.

Similar Messages

Next steps after install of solaris10

Hi as I,m new to solaris10 having only used windows i,m a little stuck. Having got solars up & running with help from the forums i need to move on. I would lke to run various programs eg word/ a image program etc, do any of these come with solaris package if so how do i find them / where are they? i know this is very basic stuff but is impossible if u dont know the next steps to take.
If there is a tutorial i am wiling to learn

hi spiky001
Welcome to Solaris.
yes, mozilla is not installed on Solaris you have to download it from the web and then install it.
You can log on to or ftp to sun's site [www.sunfreeware.com] with username as anonymous and password as your valid email id.
You can download loads of stuff from there.
Edited by: hiteshthappa on Aug 15, 2009 4:17 PM

Configuration Wizard failed at 8th step after installing sp3 patching in Moss 2007

Hi
While running in the config wizard it failed at 8th step please give me some suggestion on this
[SPManager] [ERROR] [2/9/2014 8:18:52 AM]: ReflexiveUpgrade [SPServer Name=***** Parent=SPFarm Name=SharePoint_Config] failed.
] [ERROR] [2/9/2014 8:18:52 AM]: Logon failure: unknown user name or bad password.
[SPManager] [ERROR] [2/9/2014 8:18:52 AM]: at Microsoft.SharePoint.Search.Administration.MSITLB.IGatherManagerAdmin.SetDefaultAccount(String bstrAccount, String bstrPassword)

Hi Myprofile,
Logon to the front end server with the Farm admin account then
try this from an administrative command prompt
cd "c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN"
then at the
c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\
run
psconfig -cmd upgrade -inplace b2b -force
Cheers,
Stacy Anothersharepointblog.blogspot.com

During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.

Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
Mylenium

After installing ios8 on ipad 2 cant continue the last few steps after

after installing ios8 on ipad 2 cant continue the last few steps after

Hello, Reza104.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through for this issue.
Get help with buttons and switches on your iPhone, iPad, or iPod touch
If the issue persists, see the section labeled Get more help.
Cheers,
Jason H.

The Sims 2 crashes after installing Nightlife or Pets Expansion Packs

I'm at the end of my rope, so I thought I would see if anybody out there can help me. I'm posting this on a few boards.
I've been a huge fan of the Sims ever since the first game was released. I got my first Mac a year ago, and The Sims 2 for it for Christmas. I put off purchasing any expansion packs - I had enough fun with the base game and downloaded custom content that I did not feel justified in spending the money. Then they made Pets, and I was sorely tempted. After playing with that expansion on my sister's new Windows Vista laptop, I decided that I would get it for my Mac for my birthday in July.
After I installed the expansion pack, my game would crash during the blue startup screen. I removed custom content, reinstalled the game, and tried everything else the Aspyr tech support could think of - including sending my disc back for a replacement copy.
I've included all of our correspondence below. Maybe someone out there has had a similar problem, or can think of what could be causing this issue.
Today I tried installing the Nightlife expansion pack, and was met with the EXACT same issue. Obviously there is something wrong with my Mac or the base game, or some bit of software or code on my system is screwing things up. . .
I'd really hate to sell the expansions online and then fork over the money for a copy of Windows and the PC version of Pets (I already own the base game). I'd hate to devolve back into a Windows user =+\
7/31 I sent a message to Aspyr Support through their website:
I just installed the Pets expansion on top of the Sims 2 base game. Now it crashes before the start-up screen has finished loading. I tried removing the downloads folder and the neighborhoods folder, in case something in there was not compatible. The game still crashes.
8/1
Greetings,
I'd recommend downloading the latest version of Quicktime from apple.com as well as our Pets patch via support.aspyr.com and see if that solves the issue. If not:
This error can occur for a number of reasons; Multiple installations of the game, unnecessary patching of the game, moving game files around after installing, installing the game to your desktop, or corruption of game files. Unfortunately a clean install is the only way to resolve this issue.
I recommend the following troubleshooting steps. Try running the Repair Disk Permissions function of the Disk Utility located in Applications/Utilities. Also, avoid installing the game to Applications or the Desktop; there are permissions conflicts that can arise when games are installed here. Games work best when they are installed in a separate games folder on the top/root level of your hard drive.
Reinstalling gets rid of any game data that may have become corrupt. Be sure to trash the game's preferences file(s) (com.aspyr."Sims2".plist) located in the Home/Library/Preferences folder. Common game file locations are Home/Library/Preferences and Home/Library/Application Support and Home/Documents when you do so. Then just trash the current copy of the game and install a new copy to the new games folder at the root of your hard drive. I'd also recommend doing a Spotlight search of your computer to make sure you've removed the game files / folders before reinstalling.
You can usually find specific removal instructions via the readme file located in the main game folder to use as a guideline for installing the game.
(From the Sims2 readme file)
To uninstall The Sims 2 and The Sims 2 Body Shop, drag the following to the trash:
"The Sims 2" folder which contains the game and The Sims 2 Body Shop applications
"home folder\Documents\EA Games\The Sims 2" folder
"home folder\Library\Preferences\com.aspyr.TheSims2.plist" file
"home folder\Library\Preferences\com.aspyr.TheSims2BodyShop.plist" file
"home folder\Library\Preferences\com.aspyr.TheSims2PackageInstaller.plist" file
If you have Sims 2 expansions you should run the game once by launching it from the hard drive before installing any expansions. This will create a new set of preference files and allow the installers for the expansions to properly install the software.
I hope this helps.
8/1
Thank you for your quick response. Sadly, the game still does not work. I tried all of your advice, then decided to make sure I had done everything I could possibly think of.
First, I moved my saved games (and downloads, user data, etc) to a folder on the desktop, so I could retrieve them later.
I ran the Repair Disk Permissions function.
I had the latest version of Quicktime, but I reinstalled it anyway. I also downloaded all available system updates.
I erased all of my remaining Sims data, including the preference files.
I rebooted. (not sure if this does much, but I know my old PCs worked better with reboots)
I installed the Sims 2 in a newly-created Games folder on the HD. I also installed the patch for the base game.
I played the game; it functioned properly.
I rebooted again and installed the Pets expansion and the patch.
It is behaving the same way as before - the game quits unexpectedly when the startup screen gets to "calibrating canine customization."
Oh, and I did not moved my saved data back into the game folders - I tried running it clean, first.
Is there anything else I can try? Or do I just give up and sell my expansion pack on eBay?
-Schenley
8/2
Hello,
Here are specific instructions for fixing the problems with Sims 2 Pets.
1. Start by removing any Sims DVDs from the drive
2. Drag The Sims 2 application folder from your Hard Drive to the trash
3. Drag The EA Games folder from the Documents folder to the trash
4. Drag the EA Games folder from the Users/Shared folder to the trash
5. Go to Home/Library/Preferences and drag to the trash the following files com.aspyr.thesims2.plist, com.aspyr.thesims2bodyshop.plist, com.aspyr.packageinstaller.plist (you might not have all of these files)
6. Empty the Trash
7. Do a search of the computer for The Sims 2 as well as EA Games and trash all Sims 2 files (remember to empty the Trash)
8. Launch the program called Disk Utility from the Application\Utilities folders
9. Select your main Hard Drive and run Repair Disk Permissions (this will insure your Mac is running at its best)
10. When this is done close all windows
11. Insert The Sims 2 DVD
12.Open the Sims 2 DVD and drag The Sims 2 folder to your Macintosh HD
13. This will take some time to copy over
14. When the files have finished copying open the HD and the Sims 15. folder and launch The Sims 2 Application
16.. close down the game
(17-20 only apply if you have University)
17. Insert the next expansion DVD University
18. Run the Expansion installer
19. launch the game
20. close the game
(21-24 only apply if you have Nightlife)
21. Insert the next expansion DVD Nightlife
22. Run the Expansion installer
23. launch the game
24. close the game
(25-28 only apply if you have Open for Business)
25. Insert the next expansion DVD Open for Business
26. Run the Expansion installer
27. launch the game
28. close the game
(29-36 only apply if you have Pets)
29. Insert the Pets DVD
30. Run the Pets installer
31. Launch the game
32. Close the game
33. Download The Sims 2 Pets 1.6 Rev A patch
http://support.aspyr.com/index.php?x=&mod_id=2&root=201&id=438
34. Run the Pets Patch Installer
35. Launch the game
Everything should be up and running properly at this point. Thank you for playing The Sims 2.
Have a nice day,
Aspyr Tech Support
8/2
Hello again,
I greatly appreciate how quickly you responded once more, but frustratingly the game is still not working. I burned my saved game info to a DVD so that I could erase every single Sim-related file on my system. I followed steps 1-16 exactly , then skipped to 29. But once I launched the game with Pets, the exact same problem occurred - it (un)expectedly closed when the startup screen got to "Calibrating Canine Customization."
I don't know what could possibly be going wrong, and it's very disappointing. Please let me know if there is anything else I should try.
8/3
Hello,
I am sorry you are still having problems with The Sims 2. In most cases checking to make sure you have all the latest Apple updates and a fresh install will fix this problem.
Here are a few things to check for:
1. Make sure the game is installed on the boot volume, the main hard drive.
2. Don't put the game in your Applications folder. There are permissions conflicts that can arise when games are installed here. Install the game to the root level of your drive instead.
3. Run the permissions repair. To do this, launch the Disk Utility located in the Utilities folder in the Applications folder. The second tab will allow you to repair permissions.
4. Remove the game completely (search for all game files) and run the install again, and choose the Macintosh HD as the destination for the install. When you launch the game, leave all in-game graphics settings at the defaults. Then reinstall the patch.
Here's something else you can try. Uninstall the game again, move ALL files related to game to the trash and empty it. Do a search on your entire computer to make sure that you got everything. Disconnect any peripherals from your computer except for the keyboard and mouse, create a New User account, reboot the computer and log into the new user account. Then reinstall the game. Choose your Macintosh HD as the destination to install to, and after initially launching the game, leave all in-game graphics/resolution settings at the defaults.
Have a nice day,
Aspyr Tech Support
8/3
Sorry, it's me again.
I've done everything you suggested in this and the other e-mails, to no avail.
-my system is fully updated.
-ALL Sims 2 files trashed and emptied.
-Permissions repair run.
-peripherals unplugged.
-New user created.
-Rebooted and logged in as new user.
-Installed directly to HD.
-Launched + closed game.
-Installed Pets Exp.
-Launched - failed. It crashed at the very same point during startup.
-downloaded and installed patch; still failed.
I'm ready to restore my base game saved files from their DVD and sell the expansion pack on eBay.
8/3
There is one last thing to try and that is to assume there is something wrong with the Pets DVD. We offer a disc replacement service for $10 or, if you have purchased the disc in the last 90 days, it is free.
8/16/07
I received my replacement disc today, and quickly installed it after backing up my files. The game still crashes at the same point during startup. Is it time to give up?
8/16/07
Hello,
I am very sorry the Pets expansion has not worked for you. I have never run into a situation where nothing will fix the problem. In all cases with the Sims 2 or expansions a disc replacement fixes the problem. I would guess that there is some obscure Apple issue causing the Pets to crash.
Have a nice day,
Aspyr Tech Support

I finally got the solution from a friend at the TSR forum. It was a problem with QUicktime 7.2. I needed to install this update:
http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html

Kernel Panic in 10.6.3 after Installing Safari 5

I have had my second Kernel Panic in 10.6.3 after installing Safari 5. The first one occurred within 3 hours of installing Safari 5. The second occurrence was 7 days later. Both crashes occurred while browsing in Safari. I have included my system info and the panics:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.6 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.18f5
Serial Number (system): W8750*XA9
Hardware UUID: 00000000-0000-1000-8000-001EC200CD25
Sudden Motion Sensor:
State: Enabled
Interval Since Last Panic Report: 2940365 sec
Panics Since Last Report: 1
Anonymous UUID: DB756B08-C35C-444B-B0A4-89BC538C3596
Tue Jun 8 22:46:50 2010
panic(cpu 1 caller 0x2269e4): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.3.12/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x7fdd3e28 : 0x21b449 (0x5ce420 0x7fdd3e5c 0x2238a5 0x0)
0x7fdd3e78 : 0x2269e4 (0x585e1c 0xffffffff 0x585db4 0x2262a8)
0x7fdd3ef8 : 0x2270ea (0xaf7901c 0x11cc 0x7fdd3f28 0x0)
0x7fdd3f68 : 0x219096 (0x29e695 0x0 0x1 0x4ec9dc)
0x7fdd3fa8 : 0x2a7a07 (0xffffffff 0x1 0x29f42f 0xadb92e4)
0x7fdd3fc8 : 0x29e8a6 (0x0 0x1 0x10 0xadb92e4)
BSD process name corresponding to current thread: mDNSResponder
Mac OS version:
10D573
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
System uptime in nanoseconds: 19570068272057
unloaded kexts:
com.cisco.nke.ipsec 2.0.1 (addr 0x7f9f2000, size 0x454656) - last unloaded 41163749814
loaded kexts:
com.cisco.nke.ipsec 2.0.1
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
foo.tap 1.0
foo.tun 1.0
com.pctools.iantivirus.kfs 1.0.1
se.coolbook.driver2 2.1.0
com.apple.driver.StorageLynx 2.5.3
com.apple.driver.Oxford_Semi 2.5.3
com.apple.driver.LSIFW500 2.5.3
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 2.5.3
com.apple.driver.initioFWBridge 2.5.3
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.IOBluetoothSCOAudioDriver 2.3.1f4
com.apple.driver.IOBluetoothBNEPDriver 2.3.1f4
com.apple.driver.InternalModemSupport 2.6.2
com.apple.driver.AppleTyMCEDriver 1.0.1d8
com.apple.driver.AudioAUUC 1.4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleIntelYonahProfile 14
com.apple.iokit.CHUDProf 216
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.AppleIntelPenrynProfile 17.1
com.apple.driver.AppleGraphicsControl 2.8.56
com.apple.GeForce 6.1.0
com.apple.driver.AppleIntelNehalemProfile 11.1
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleLPC 1.4.11
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.driver.AppleIntelMeromProfile 19.1
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.driver.CSRHIDTransitionDriver 2.3.1f4
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2 - last loaded 352836556749
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.driver.AppleUSBAudio 2.6.8fc1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.driver.AppleBluetoothHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.IOBluetoothHIDDriver 2.3.1f4
com.apple.driver.AppleHDAPlatformDriver 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 1.8.4fc3
com.apple.iokit.CHUDKernLib 208
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.6 GHz, 6 GB, SMC 1.18f5
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: Hitachi HTS722020K9SA00, 186.31 GB
Parallel ATA Device: MATSHITADVD-R UJ-85J
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Logitech Camera, 0x046d (Logitech Inc.), 0x09a6, 0xfd110000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa400000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa420000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
FireWire Device: FreeAgent FW, Seagate, Up to 800 Mb/sec
Interval Since Last Panic Report: 273926 sec
Panics Since Last Report: 1
Anonymous UUID: DB756B08-C35C-444B-B0A4-89BC538C3596
Tue Jun 15 09:22:00 2010
Machine-check capabilities (cpu 0) 0x0000000000000806:
family: 6 model: 15 stepping: 11 microcode: 179
Intel(R) Core(TM)2 Duo CPU T7800 @ 2.60GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0xb200004000000800 valid
MCA error code: 0x0800
Model specific error code: 0x0000
Other information: 0x00000040
Threshold-based status: No tracking
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0x0020000000000000 invalid
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb200121014040400 valid
MCA error code: 0x0400
Model specific error code: 0x1404
Other information: 0x00001210
Threshold-based status: No tracking
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x2a7c94): Machine Check at 0x0071dc4e, thread:0xb421b7c, trapno:0x12, err:0x0,registers:
CR0: 0x80010033, CR2: 0x78716000, CR3: 0x00100000, CR4: 0x000006e0
EAX: 0xb030abf4, EBX: 0x00176ec2, ECX: 0xb030ae6c, EDX: 0x03d89f00
ESP: 0xb030abb0, EBP: 0xb030abb8, ESI: 0x00000001, EDI: 0x00000000
EFL: 0x00010282, EIP: 0x0071dc4e
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x819e18 : 0x21b449 (0x5ce420 0x819e4c 0x2238a5 0x0)
0x819e68 : 0x2a7c94 (0x590140 0x59022d 0x71dc4e 0xb421b7c)
0x819f58 : 0x29f912 (0x1 0x0 0x0 0x0)
BSD process name corresponding to current thread: AgentService
Mac OS version:
10D573
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
System uptime in nanoseconds: 279587791547472
unloaded kexts:
com.cisco.nke.ipsec 2.0.1 (addr 0x7f163000, size 0x454656) - last unloaded 51756013224
loaded kexts:
com.cisco.nke.ipsec 2.0.1
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
foo.tun 1.0
foo.tap 1.0
com.pctools.iantivirus.kfs 1.0.1
se.coolbook.driver2 2.1.0
com.apple.filesystems.cddafs 2.4.3 - last loaded 38997901610284
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.InternalModemSupport 2.6.2
com.apple.driver.AppleTyMCEDriver 1.0.1d8
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleIntelYonahProfile 14
com.apple.iokit.CHUDProf 216
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AppleIntelPenrynProfile 17.1
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.IOBluetoothSCOAudioDriver 2.3.1f4
com.apple.driver.AppleIntelNehalemProfile 11.1
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleGraphicsControl 2.8.56
com.apple.driver.IOBluetoothBNEPDriver 2.3.1f4
com.apple.GeForce 6.1.0
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.driver.AppleIntelMeromProfile 19.1
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleLPC 1.4.11
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.driver.CSRHIDTransitionDriver 2.3.1f4
com.apple.driver.StorageLynx 2.5.3
com.apple.driver.Oxford_Semi 2.5.3
com.apple.driver.LSIFW500 2.5.3
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 2.5.3
com.apple.driver.initioFWBridge 2.5.3
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.driver.AppleBluetoothHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.IOBluetoothHIDDriver 2.3.1f4
com.apple.driver.AppleHDAPlatformDriver 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 1.8.4fc3
com.apple.iokit.CHUDKernLib 208
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.driver.AppleUSBAudio 2.6.8fc1
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.6 GHz, 6 GB, SMC 1.18f5
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: Hitachi HTS722020K9SA00, 186.31 GB
Parallel ATA Device: MATSHITADVD-R UJ-85J
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Logitech Camera, 0x046d (Logitech Inc.), 0x09a6, 0xfd110000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa400000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa420000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
FireWire Device: FreeAgent FW, Seagate, Up to 800 Mb/sec
<Edited by Host>

MikeDV wrote:
As an additional note I went 156 days without a panic prior to the most recent panics.
You shouldn't have them at all. I don't see anything in the 2 panic reports implicating Safari?
Disconnect all peripherals, only Apple keyboard and mouse and test. Often connected peripherals cause kernel panics. See isolating issues in Mac OS X. for troubleshooting steps.
EDIT: Run your Repair Disk from your install disk.
-mj
Message was edited by: macjack

How do I restore gid after installing Mavericks?

Hi folks,
quick question for you all.
Before installing Mavericks (I was running Mountain Lion), I was in the following situation:
I was user myname with uid=501, and
(besides other) I was member of a group called myname, which had gid=501.
Now, after installing Mavericks,
I'm still user myname with uid=501,
group myname still exists,
but now has gid=20, and
I am no more member of it.
As a result, a few files / folders which were accessible before installation, are denied to me now (listing them in Terminal correctly displays them as assigned to gid=501, which unfortunately seems to be unknown to the system).
How do I fix this (apart from changing file permissions)? I presume I should just
take group myname and change its gid back from 20 to 501,
add back my membership to it.
But how do I go through first step? And, more importantly, am I at risk of doing something wrong?
(And why on earth would Mavericks do that?)
Thanks in advance
S

OK thanks I'll do that. I had actually upgraded to Lion, but when my data was read back to the new hard disk, obviously the upgrade wasn't. Thanks for your advice.

After installing new update, my itunes will not open and it says to reinstall it. I did this two or three times and it still won't open. HELP!!!!!!

After installing the new iTunes update (10.5, if that's the newest update)
when i try to open iTunes, an error message pops up that says
iTunes.exe - Entry Point Not Found
"The procedure entry point
kCMByteStreamNotification_AvailableLengthChanged could not be
located in the dynamic link library CoreMedia.dll."
When I click OK, another message pops up saying
"iTunes was not installed correctly. Please reinstall iTunes."
"Error 7 (Windows Error 127)
I tried reinstalling it several times and the same thing keeps happening.
WHAT DO I DO?!!!
Please help!
Thanks!

Followed the steps in http://support.apple.com/kb/HT1925?viewlocale=en_US then downloaded and it worked.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After installing Mavericks on my iMac, Apple Mail would not sync with my Google Apps email account. Now Mail crashes every time I open it. What's up?

After installing Mavericks on an imac, Mail would not sync with my Google Apps email account. After I clicked on All Mail the program crashed and now it crashes every time I open Mail. Does anyone have an suggestions?

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc. The message I get says "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?!

I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.

Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg ‏218 KB
NI mDNS errors.jpg ‏102 KB
MAX Devices.jpg ‏83 KB

Hi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland

I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?

I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?

Hello Josephene,
Welcome to the Apple Support Communities!
I understand that after recently updating to the most recent versions of Mac OS X and iTunes. To troubleshoot iTunes Wi-Fi syncing not working as expected, please work through the suggested steps located in the attached article.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
Have a great day,
Joe

EXTREME lag after installing Windows 8.1 pro via / Bootcamp assistant

Hey guys, today I've literally been through **** trying to get this game working on my MacBook Pro.
I've basically gone out & bought Windows 8, created a partition on my hardrive (of my MacBook Pro) & installed it into that partition using Apples 'Bootcamp assistant'. After installing the operating system I also loaded the drivers which were given to me by Apples 'Bootcamp assistant'.
I now have the game on the Windows 8 (on my MacBook) which is a £2000 machine... I have got to the menu & experienced extreme lag to the point where I've even managed to turn down all my video settings & it is still lagging a lot despite my high-end computer hardware - here is my computer http://store.apple.c...B/A&step=config#
I have tried running the game on this website http://www.systemrequirementslab.com & everything is great but it says I don't have the required 512MB of video RAM... It says I have 256MB. This is complete ********? I believe I have 2GB of GDDR5 video RAM. It also says that my graphics card is called 'Microsoft Basic Display Adapter'. So I believe this is where the issue lies. My theory is for some reason one of the drivers which I have installed which was given to me by the Bootcamp assistant is messing with me.
This is literally all the information I can possibly provide, does anybody know how I could fix this?
Thanks you!

If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
Rudegar ... I think the Windows installer did not see any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

Steps After Installing JDI

Similar Messages

Maybe you are looking for