Steps for connecting ext. system (nonSAP) via tRFC

Hi i need detailed description on how to connect ext. system (nonSAP) or program to XI.
I need a RFC-Destination - what type?! TCP/IP?!
Scenario will be that we send a receive IDoc from this nonSAP-System.
Can someone provide me with detailed informations?! Which user-type etc., do i need a user....?
br

Hi,
Assuming target system is your R3.
You need to follow the below configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for XI (transaction SALE)
Maintain Port (WE21)
Maintain partner profile for XI. (WE20):
This is just example you can see the configuration part:
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Similar Messages

Setup steps for connecting BW to CRM

Hi,
Could somebody please let me know the setup steps for connecting BW and CRM.
Thanking you in advance,
Dhanabal

You can also find the steps to connect BW to CRM in Best Practise
cheers
mkr

Wireless interface for connecting ext.HD to MacBook

i have a Western Digital external harddrive that i connect to my MacBook via firewire since it has both my iTunes & iPhoto libraries.
i use the AirPort Extreme for internet & printer access
is there a peripheral that would allow me the same wireless capability as the AirPort for connecting my MacBook to the Western Digital external harddrive?
macbook Mac OS X (10.4.7) nano

Linksys has a router (the WRTSL54GS) that has a USB port on it for adding networked storage to it, but as their routers have a spotty record when it comes to Intel-based Macs you may have trouble connecting or maintaining a connection.

Help for connecting Ext Supplier catalog in SRM 7.0 & ECC 6.04

Hi Catalog Experts ,
We are thinking to connect External Supplier catalog to our SRM 7.0 system ( Like Supplier Corporate Express..etc).
I am aware that supplier Catalog need OCI compliance .
Can anyone please suggest me ....
1. Is any special hardware/server..infrasructure is requiered for same ?
2. Approx how much days requiered to deploy Catalog to one Supplier/Broker ?
3. Is these Ext catalogs can be connected to ECC 6.04 syetm as well ?
4. If we select some Item from catalog and added in SRM Shopping Cart, which Material Code will be there along with Vendor    Mat No or it will be Free text Shopping Cart ?
Will be appricaited if reply given infornt of each point..
Thanks in advance
Regards
NAP

Hi Experts ,
I managed to get the Catalog Credentials from Supplier and done the setting in SPRO ..Ext Web service -Std Call structure..in SRM 7.0 as below :
                         XXX                          URL
username     USER123                          Fixed Value
password     password                           Fixed Value
HOOK_URL                                                Return URL
returntarget     _parent                           Fixed Value
Now, I can go to Punchout /Ext Catalog from Shopping Cart, select item from catalog with Qty,-> add to Cart -> View Cart->Checkout Order->Retrun Now....after that....then no data come to Shopping Cart and the web browser remains Blank......the web browser at header shows...http://auvimel00s965.ad.internal:xxxx/sap/sapsrm/inbound_hdlr?TARGET_URL=?nwbc_action_url=%2fsa - Windows Internet Explorer pro
If I use same Catalog credientials which I used in SRM, system bringing Material decription back in Plant Maintaince Order. ..in ECC ( in ECC..there is mapping done in Convert HTML fields to SAP fields...etc but no other confiuration done in SRM. other than at Ext Web Service..
Can anyone suggest, what is mssing here..... Is Catalg Provider....need to do something for SRM ( I just want to popluate the Mat decription for demo purpose....)
Thanks
NAP

Need Applying Note 1422843 steps for my SAP system

Hello,
My company have an SAP netweaver 7.0 and when i check in system status sub-window and disp+work i got 221 level patch of the kernel and non unicode system, i read the note 1422843 and i want to apply it but i need a confirmation of steps i have to run following the note :<br>
1-i use SE38 to create a report in the package SPOO with the name RSPO2010, in the header of that report i past the text from
   the note in the <b>"Seletion texts"</b>.<br>
2-I apply the note via transaction snote then i run that report<br>
3- I update the kernel with the suitable (bellow) patch attached obtained from the part <b>SP Patch Level</b> of the same note :<br>
<b>SAP KERNEL 7.00 64-BIT    SP238    000238</b>
4- i restart the SAP system.
The note link : https://websmp230.sap-ag.de/sap(bD1mciZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1422843#PL
thank you for your help.

Hello,
About The point 4 (
Apply the latest kernel patch level 236, and then apply disp+work patch level 244 (the latest).
), when i follow the download link of kernel patch suitable to my release (SAP KERNEL 7.00 64-BIT) in the note 1425811 (related to the note 1422843) i have two choices with different packages :
1) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> #Database independent, this list offers this packages :
          A)      SAPEXE_236-20001020.SAR   Kernel Part I (for Basis 7.00)
          B) dw_239-20001020.sar   disp+work package
          C)      dw_245-20001020.sar   disp+work package
2) SAP KERNEL 7.00 64-BIT -> AIX 64bit -> ORACLE, this list offers this packages :
          A)       SAPEXEDB_236-20001021.SAR   Kernel Part II (for Basis 7.00)
Please i need to know What packages to apply? and i need to understand while the note refers only to the kernel patch how did you know that the disp+work package also must be applied?
Edited by: NetMed on Mar 6, 2010 9:49 PM

Why does Apple not support the rSAP - Remote SIM Access Profile - for connection to car handsfree via Bluetooth

Hello community,
I just ordered a new car and it comes with a bluetooth based handsfree installation based on rSAP (remote SIM access profile). I learned that rSAP is the ideal thing to eliminate the unwanted radiofrequency radiation (RFR) inside the car. Now while googleing I also learned that iPhone on iOS does not support rSAP.
I would like to point to the following page which shows some more detailed information on the rSAP topic:
http://paulroberts69.wordpress.com/2011/02/28/android-2-2-and-rsap-compatibility /
I find rSAP a very usefuly thing, if it really brings the GSM radiation level down inside the car and allows the full use of all GSM functions by the rSAP premium handsfree kit built into the car. I absolutely do not understand why it is not already available with iOS.
From several web sources I understand that rSAP is available for jailbroken iPhones. That means, the chips inside the iPhone would support a rSAP service. Therefore my question: will it become available with iOS 6?
Or do all the folks at Apple drive old cars/brands and don't even think of the rSAP feature? Can we somehow start to get a hearing by the Apple developers? According to my knowledge, rSAP is implemented with all premium handsfree factory units of the VW brands - Audi, VW, Skoda ... This should make a relevant user base!
Any others with same wish and/or experiences? Comment here please!
Regards,
Olaf

Hi Meg,
could be several things:
1. they forgot?
2. none of their team members drives any VW branded car?
3. nobody cares about the radiation inside the car?
4. all have plugin holders for the iPhone?
I am just surprised that rSAP is offered by a premium car maker, but Apple seems ignorant about its support.
I am mostly concerned about the radiation when I use regular hands free. But I do understand that rSAP also has some limitations (only access to SIM contacts and other things, Wikipedia DE has a good full report, Wikipedia EN is much shorter).
Regards,
Olaf

Connecting external systems via JMS

Hello there!
I have this ATG MessageSink component connected on a sqldms queue named /integration/CustomerQueue, what is the best approach for connecting external system (like a standalone .jar) on ATG sqldms Messaging System, to post a message on this sqldms queue?
<message-sink>
     <nucleus-name>
          /integration/jms/sink/CustomerMessageSink
     </nucleus-name>
     <input-port>
          <input-destination>
               <provider-name>
                    sqldms
               </provider-name>
               <destination-name>
                    sqldms:/integration/CustomerQueue
               </destination-name>
               <destination-type>
                    Queue
               </destination-type>
          </input-destination>
     </input-port>
</message-sink>
Thanks!

Resolved.
I just created a ConnectionFactory and a Queue on Weblogic, than I created a JMSProvider on ATG and registered on dynamoMessagingSystem.xml:
Create a JNDI Reference for the ConnectionFactory created on WLS: /atg/dynamo/messaging/WeblogicJMSProvider
$class=atg.nucleus.JNDIReference
JNDIName=jms.ConnectionFactory
Register a Provider on: /atg/dynamo/messaging/dynamoMessagingSystem.xml



<provider>
<provider-name>
    weblogic
</provider-name>
<topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</topic-connection-factory-name>
<queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</queue-connection-factory-name>
<xa-topic-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-topic-connection-factory-name>
<xa-queue-connection-factory-name>
    dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
</xa-queue-connection-factory-name>
<supports-transactions>
    true
</supports-transactions>
<supports-xa-transactions>
    false
</supports-xa-transactions>
</provider>
And finally create a MessageSink or MessageSource pointing the provider-name for weblogic
<message-sink>
<nucleus-name>
/integration/jms/sink/CustomerMessageSink
</nucleus-name>
<input-port>
<input-destination>
<provider-name>
weblogic
</provider-name>
<destination-name>
Integrations.CustomerQueue
</destination-name>
<destination-type>
Queue
</destination-type>
</input-destination>
</input-port>
</message-sink>

Provide steps to connect HPLJ P1102w to AirPort router (MacOSX 10.5.8)

Please provide deterministic set of steps for connecting HP LJ P1102w wirelessly to AirPort router (MacOSX 10.5.8).
I recently bought a HP LaserJet P1102w in the hopes that since it supports AirPrint and my OS, I should be able to quickly and easily connect it to my wireless network, which has been running without any hitches, except the occasional rebooting of the router. I've tried everyhing, including reading the quick start guide and the on-CD manual that came with the printer (two things that as a convert from PCs to Macs several years back, I have learned shouldn't really even be necessary, when things just work out of the box.)
I have gone through the standard install on the SW CD, gone through the steps to upgrade fhe firmware, and tried various combinations of the steps indicated in the conflicting suggestions I found in the quick start, CD user manual, and in the online support site that HP has set up in lieu of actual human support. At one point, through some combination of (not all documented) steps that I can not reproduce, I managed to get to a web-based configueation page on the printer, and successfully provided my net SSID and password, and confirmed by having the printer produce it's configuration page that it did have the settings to connect to my wireless network. However, the IP address it was reporting was still a standard "local" IP address (starting with 169.xx.xx.xx), rather than being on the correct subnet for my actual network (10.xx.xx.xx). And I could no longer get to the printers web-based config page (no matter what IP I tried in my browser) to check/adjust settings.
i found in another location the suggestion to go through the System Preferences to get to the Print Queue, and select Utiltiy --> HTMLConfig..., which I also tried tonight, but as soon as I click the HTMLConfig... button, the Utility simply closes and nothing else happens.
I'm on the verge of returning the printer if I can't get it configured correctly. As it is, I'm very displeased that I've had to spend this much time trying to get set up (and it's still not working). I used to build computers from scratch back in the day-- but that was "for the fun" of trying to get all the pieces to work together, correct drivers installed, etc. -- but I thought we were far beyond that for end-user products that are intended to work out of the box. And I'm surprised at the lack of quality / consistency in the documentation provided by HP.
Any help other users (or hopefully HP!) can provide would be appreciated, *particularly* it it's in the form of "reset to facory settings by pressing these buttons, and perform these steps to ensure a successful installation."
Thanks.

Carolyn Samit wrote:
HI Samuel,
Definitely try a different channel.
Airport Troubleshooting Guide
Carolyn
Hey Carolyn thank's for your reply!
The Airport Troubleshooting Guide is great. Unfortunately did not help in my case.
(I tried a lot of other things, too. Installing the combo update 10.5.8, resetting PRAM, deleting keychain entries, removing Aiport adapter in the list of network adaptors, removing known networks and so one. Nothing did a change!)
What did help indeed was to plug in the Mac by ethernet cable and configure the Airport Express base station to a different channel. Then it works like charm (again), as you suggested, too.
I tested with another (d-link) wlan (b/g) station and confirmed my first suspicion that it has something to do with the channel and not with the base station or some configuration.
Both, channel 12 and 13 are NOT working, but all others do fine!
This is a bug (introduced in 10.5.8 or maybe 10.5.7, I am not sure?). I repeat, this is a bug and unrelated to the wifi battery issues described by others. I guess I will file a feedback report.
As a work-around, switch to another channel. I am not sure what happens to people who have channel left to "automatic" and the base station changes to 12 or 13 by itself. (Is this technically possible?) I think they will get problems. Definetely.
For completeness, my specs:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version (system): 1.2f10
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.16.2
Current Wireless Network: Apple Airport Express
Wireless Channel: 1

What are the additional steps for SRM refresh as compared to ECC refresh? (Windows and MS SQL)

Hi,
I need to know if there are any additional pre steps or post steps for SAP SRM system refresh as compared to SAP ECC refresh? Windows/MS SQL

Hello Rajat,
You have to change all the data on the middleware configuration tables to point to your new ECC system. I don't remember exactly which tables are but you can take a look to this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/309258e9-0da2-2d10-b598-bf27edb56a31?overridelayout=t…
It explains how to do the Middleware Configuration between SRM and ECC. You should also do a master data transfer from ECC to SRM.
Best regards.

Procedure for connecting print programme and form using Nace transaction?

Hello Folks and Forms Guru's,
Can u please tell me the entire procedure step by step for connecting a print programme to a form using Nace Transaction .
Its a urgent requirement and points will be awarded.
Om sai ram,
Raghu

goto NACE
...Select the Application
->click on output types icon on application tool bar.
-> Select the output type
-> dbl click on processing routine from the tree
it will display the form name & program name.
click on change mode-> replace the program/form name.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tv

The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences

Step-by-Step Guide for connecting CRM with SAP R/3 system Server

Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
Maniprabu

Hi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
   Create an entry for following parameter entry:
   Key - R3A_COMMON
   Para name - CRM_DEFAULT_DESTINATION
   Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
    CRMRFCPAR :
    Create new entry with following data:
    User - CRM
    Object name - *
    RFC Destination - RFC destination for CRM
    Load types - All Load Types
    In Queue flag - X
    Send XML No XML
    CRMPAROLTP :
    Create the following parameter entry:
    Para name - CRM_DEFAULT_DESTINATION
    User - CRM
    Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
    Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b>

Connection steps for SAP BW and R/3

Hi Every Body,
Can you please explain me detail about the connectivity between R/3 and BW.
General steps which am aware is as follws;-
SAP R/3 steps to be performed
1.     Define Logical system---->(e.g ABC100)
2.     Assign client to logical system -->(100)
3.     Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
SAP BW Steps:-
4.     Define Logical system---->(e.g ABC100)
5.     Assign client to logical system -->(100)
6.     Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
Then in BW Environment in RSA1->Source Systems->right click and choose Create
There are two options available for R/3 system one is Manual and one is Automatic.
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
Is there any other steps am missing.What about the inbound and outbound Idoc Parameters.
I feel this will help while transferring data to BW.am I right.
Please clearly explain the steps for R/3 and BW connectivity.
Regards,
VJ

Hi,
<i>For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.</i>
RFC Destination should be R/3 system. NOT BW system.
<i>should i make connection with only R/3 200(Data Client) to BW</i>
Yes you have to connect to 200 only. Not to 100.Other wise you will not get data from R/3 to BW.
<i>What is the Use of Transport Button in RSA6.Post Processing data sources.</i>
It will be used to create Trasnport requests on DS .
<i>Suppose if i activate data source from Customizing client(100)and click on Transport button in RSA6 if there is connection with this client to BW. What is the Impact.</i>
It will not give any impact on BW. Actually it ask you to create a Transport requset by Prompting the message box. After click on create button and entering the description, it will create a transport request.
<i>Clearly explain me in detail what happen when i choose Transport Button in RSA6 for BC data sources.</i>
It is must and should process. Because you will not activate(using of RSA5) the DS in quality R/3 system. So to use this DS in QA system, you will import the Transport request creatd in DEV r/3.
In your case, you will use client 100 for activating the DS and creating Transport reuests. And then these DS are automatically available in client 200, because DS are Client independent.
With rgds,
Anil Kumar Sharma .P

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19)    error group: 101 key: FC_ERROR_PROGRAM
     at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
     at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

Cannot provide connect data for database target system CONFIG_DB

Hello,
I'm trying to install SP22 in NW04 but I'm getting an error on step 11 Deploy JDDI
Cannot provide connect data for database target system "CONFIG_DB".
Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
ERROR      2008-10-01 17:51:09
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR      2008-10-01 17:51:09 [iaxxinscbk.cpp:289]
           abortInstallation
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\PATCH\MSS\callSdmViaSapinst.log.
callSdmViaSapinst.log:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.SERVEREXT_DBSC_EXTERN(CONFIG_DB): Referenced loader #0 for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar) is not available.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar).
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader instance: Jar file #1 cannot be read: D:\usr\sap\WDA\DVEBMGS00\j2ee\jdbc\base.jar
Oct 1, 2008 5:51:08 PM   Info: Summarizing the deployment results:
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\SYNCLOG.SDA
Oct 1, 2008 5:51:08 PM   Error: Aborted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\J2EE_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\COM.SAP.SECURITY.DBSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\XML_DAS_SCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\JMS_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Processing error. Return code: 4
the spy.jar was there but some how it got deleted.
Any ideas?
Thanks

For others who may be facing the same problem and would like to have a permanent fix, you can download the largest JDBC drivers from http://service.sap.com/msplatforms and refer to note 639702 and if your system is NW7.0 with EHP1 or SR3, you should also refer to note 1109274.

Steps for connecting ext. system (nonSAP) via tRFC

Similar Messages

Maybe you are looking for