Steps for creating structural authorization profile using trans. OOSP

Dears,
Could someone please guide to the steps for creating a structural authorization profile using transaction OOSP, to authorize on the HR Payroll Area.
Thanks.
Reda

Hi,
There are comprehensive guidelines on help.sap.com for creation of structural authorizations: http://help.sap.com/saphelp_erp2004/helpdata/en/34/49ba3b3bf00152e10000000a114084/content.htm
However, please bear in mind that you cannot limit access to certain payroll area with structural authorization. For that you should use standard PA authorization object (you can use field organizational key to store Payroll Area VDSK1 in IT0001):
P_ORGIN http://help.sap.com/erp2005_ehp_02/helpdata/en/3e/b8b83b5b831f3be10000000a114084/content.htm
Cheers

Similar Messages

Can I creat the structural authorization profile in batch?

Hi All:
I have a question.
I need to creat structural authorization profile in transaction code OOSP, it's OK if I enter new entries in the OOSP and then maintenance the authorzation profile like object type; object ID; Eval. path and so on.
But there are so many new entries need to be created that I want to use lsmw to realize batch in put.
But when I use the transaction code "OOSP' to record the screen during the LSMW, I failed to see the "athorization profile maintenance" screen , that is, I can enter new entry, give it a name and text still, but cannot maintenance the authorzation profile like object type; object ID; Eval. path. In other words,the "athorization profile maintenance" screen is missing during the LSMW recording screen!
Can anyone tell me what's the reason?

Hi All:
I have a question.
I need to creat structural authorization profile in transaction code OOSP, it's OK if I enter new entries in the OOSP and then maintenance the authorzation profile like object type; object ID; Eval. path and so on.
But there are so many new entries need to be created that I want to use lsmw to realize batch in put.
But when I use the transaction code "OOSP' to record the screen during the LSMW, I failed to see the "athorization profile maintenance" screen , that is, I can enter new entry, give it a name and text still, but cannot maintenance the authorzation profile like object type; object ID; Eval. path. In other words,the "athorization profile maintenance" screen is missing during the LSMW recording screen!
Can anyone tell me what's the reason?

Create Display Authorization Profile for SAP Transaction SPRO (IMG).

Dear All,
In my current implementation project there is an requirement to create display authorization profile for SPRO. I have tried a lot but was not able to do so.
Any one is having an experience in creating display profile for SPRO (IMG) ? If any one has worked on this issue then please guide me.
Thanks,
Avinash

Hi
This is security related question. I am not security expert.
But you can check this, Include the following authorization objects in the profile and assign this profile to the target user.
S_IMG_ACTV
S_PROJECT
S_PROJ_AUT
S_PRO_AUTH
and assign activity = 03 (Display).
Hoipe it helps.
regards
Srinivas

How to get all authorization objects for a certain authorization profile

Hi ABAP experts,
I have the following problem: for a certain authorization profile of a role (created with transaction PFCG) I would like to get all contained authorization objects: e.g. for the contained object PLOG I would like to know/read all corresponding parameter values.
So:
- where are these values stored (dictionary table)?
- is there already a FM or a report to read all authoriation values for a certain authorization profile?
Thanks in advance.
Best regards,
Oliver

Hi,
check the following it might useful for you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
if helpful reward points are appreciated

Steps for Creating a Report in Oracle Apps

I need the steps for creating a Report 2.5 in Oracle Apps.
Please let me know the steps involved in detail
Regards
Choudary

First you create the report using reports 2.5. (You need to refer Application Developer's User Guide to understand Apps standards for customization)
Then register the report in Apps:
1) Define the executable
2) Place the executable in the appropriate directory (You need to refer Apps installation guide to find the directory structure for placing reports)
3) Define the concurrent program (Pay attention when you define program parameters and value sets associated)
4) Attach your report to the request group attached to your responsibility
5) Run the concurrent program using SRS (you will not see the report when you open Submit Requests Form, if you do have permission)
The above procedure is applicable if you are defining the report directly in your instance. If you are using chain link, then you may have to migrate the objects appropriately.
Some of the above activities are usually done by System Administrator and users are not given permissions.

Talent Management (EhP4) - cannot find structural authorization profiles

Hi All, 
I have looked in 3 different SAP ECC6.0 EhP4 system for the Talent Management structural authorization profiles stated in the IMG documentation and on the help.sap.com website. The profiles are: 
TMS_PROFILE 
TMS_ALL 
TMS_MAN_PROF 
There are also several "sub" profiles for TMS_PROFILE. 
To take an example from help.sap.com on their Authorizations page (http://help.sap.com/erp2005_ehp_04/helpdata/en/7b/6f92413c3a2e7be10000000a1550b0/content.htm ), the SAP_TMC_SUPER_TALENT_MANA_SPEC clearly indicates the TMS_ALL structural authorization profile is in the standard system: 
Authorizations for talent management superusers 
For more information, see Talent Management Superuser. 
The structural authorization profile TMS_ALL is also available as a template for the Talent Management Superuser. 
For more information, see Customizing for Talent Management and Talent Development under Basic Settings ® Authorizations in Talent Management ® Define Structural Authorizations. 
So... does anybody know anything about these and where I can find them? Do they require some form of activation outside of the standard switch activations for Talent Management? I've looked in several tcodes (SU01,PCFG, OOSP etc) for them but no luck. 
Any help gratefully received and points will be awarded for helpful answers and solutions! 
Best regards, 
Luke

Hey Luke:
Could you do me a favor and look in client 000 (the SAP delivered client)? You generally need a basis person for this activity, and I can't find one now on my own end to confirm my theory. However I'm pretty sure if you went to OOSP in client 000, you'd see those profiles. They were either never copied over from 000 or your security friends deleted all the profiles that are SAP delivered in the clients you're looking at.
I could talk for a super boring amount of time about the security concept of "SAP delivers too much access with their roles so we don't use them" that a good number of security teams use - but that's a story for a different day.
Take a peek in 000 and let me know what you see. If they're there, you can always have your basis chums copy them over to your clients that you want them in (presumably your security config client).
Thanks,
Chris

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

Steps for creating a new BAPI function module

Hello experts,
Can any one send me steps for creating a new BAPI function module , I got a requirement to do like this,but I dont have any clue about how to create.
Please help !!!

BAPI stands for Business Application Programming Interface.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
 Goto -> Function Groups -> Create Group.
 Enter a name (Note: This name Must start with ZBAPI)
 Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
 Click on the Third ICON that says Inactive Objects.
 Select the group that you just created and click on Activate.
 Notice that the group you created will disappear from the list of inactive objects.
- Go back to <SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully.
regards,
aswin

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

How to create a Mail profile using C#

Hi,
Need to create a mail profile using C# code. Kind of a replacement of CreateProfile() in MAPI.
Trying to create mail profile for exchange using Exchange Web service, is that the rite way to do that.
Should i use any other reference to create mail profile.
Thanks,
Dinesh

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating.

What are required feilds values for creating a sales order using va01?

What are required feilds values for creating a sales order using va01?
Please give examples if possible.

Hi,
go through this URL:
<a href="http://web.mit.edu/cao/www/SB2002/CR/VA01.htm">http://web.mit.edu/cao/www/SB2002/CR/VA01.htm</a>
Hope this will help you.
Thanks
Shiva

Query for create manual tabular form using apex collection add row button functionality

Hello everyone
My requirement is i created a tabular form manually using apex collection but if i click on add row button then previously selected data refreshed and added new row in this form it is fine.but i don't want to refreshed previously selected data and click on add row button then add new row .how it is possible? plz help
Thanks & Regards,
Ujwala

Ujwala
Instead of starting a new thread with the same question as Query for create manual tabular form using apex collection add row button functionality.
Could you answer the question about what you see while debug the javascript code.
If you don't understand the question or have trouble debug javascript let us know.
Nicolette

Steps for creating abap query

hi sap gurus,
can i steps for creating abap query
plz help me on this.
regards,
balaji.t
09990019711

Hi
Please check this link for a document on ABAP query. It explains the process step by step with screen shots..
http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
Thanks,
Ravi

Steps for Creating Report using LDB

hellow sirs
can u please tell Step by Step method for creating Reports using LDB method...
if possible with screen Shots..
thanking You
Rahul

Hi,
Please refer the code below:
Use the PNP LDB for this program,
*: Report: ZP_POSTCODE :
*: Date : 2004 :
*: Description: Displays report of employees by postcode area, :
*: includes current travelling allowances (i.e. parking :
*: permit or transport card etc..) :
*: Use: Help encourage the use of car sharing and public :
*: transport where appropriate. :
REPORT zp_postcode.
type-pools: slis. "ALV Declarations
NODES: pernr.
INFOTYPES: 0000, 0001, 0002, 0006, 0008, 0014, 0105, 0121.
SELECTION-SCREEN BEGIN OF BLOCK pcode WITH FRAME TITLE text-s01.
SELECT-OPTIONS: so_pcode FOR p0006-pstlz.
SELECTION-SCREEN END OF BLOCK pcode.
TYPES: BEGIN OF t_output,
pernr TYPE p0001-pernr, "personnel name
anredtxt TYPE t522t-atext, "title (based on p0002-anred)
fname TYPE p0002-vorna, "first name
lname TYPE p0002-nachn, "last name
orgtx TYPE t527x-orgtx, "dept
fte TYPE p0008-bsgrd, "fte
parking(20) TYPE c,
payslip TYPE t526-sachn, "payslip address
telno TYPE p0105-usrid_long, "tel number(p0105-usrty = 0020)
email TYPE p0105-usrid_long, "email (p0105-usrty = MAIL)
postcode type p0006-pstlz,
END OF t_output.
DATA: it_output TYPE STANDARD TABLE OF t_output INITIAL SIZE 0,
 wa_output TYPE t_output.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid,
 gt_events type slis_t_event,
 gd_prntparams type slis_print_alv,
 gd_count(6) type n,
 gd_outtext(70) type c,
 gd_lines type i.
*START-OF-SELECTION.
START-OF-SELECTION.
clear: gd_count.
GET pernr.
* Infotype 0121 is used to store multiple contracts for personnel.
* Field p0121-hpern contains the personnel number for the main contract.
PROVIDE * from p0121 between pn-begda and pn-endda.
* Check if main contract
 if p0121-pernr ne p0121-hpern.
 reject.
 endif.
ENDPROVIDE.
add 1 to gd_count.
concatenate 'Processing personnel data'(m10) gd_count into gd_outtext
 separated by ' '.
* Display indicator for employee count
perform progress_indicator using gd_outtext.
* Retrieve datd from infotypes
rp_provide_from_last p0000 space pn-begda pn-endda.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
rp_provide_from_last p0006 space pn-begda pn-endda.
rp_provide_from_last p0008 space pn-begda pn-endda.
rp_provide_from_last p0014 space pn-begda pn-endda.
* Check post code
CHECK p0006-pstlz IN so_pcode. "cp
* Post code
wa_output-postcode = p0006-pstlz.
* Personnel number
wa_output-pernr = pernr-pernr.
* Personnel title
SELECT SINGLE atext
 FROM t522t
 INTO wa_output-anredtxt
 WHERE sprsl EQ sy-langu AND
 anred EQ p0002-anred.
* First name
wa_output-fname = p0002-vorna.
* Last name
wa_output-lname = p0002-nachn.
* Organizational Unit text (dept)
SELECT SINGLE orgtx
 FROM t527x
 INTO wa_output-orgtx
 WHERE sprsl EQ sy-langu AND
 orgeh EQ p0001-orgeh AND
 endda GE sy-datum.
* FTE
wa_output-fte = p0008-bsgrd.
* Parking / travel deducted?
CASE p0014-lgart.
 WHEN '7180' OR '7181' OR '7182'.
 wa_output-parking = text-002.
 WHEN '7183'.
 wa_output-parking = text-001.
 WHEN '7171' OR '7172' or '7173' or '7174' or
 '7175' or '7176' or '7177' or '7178'.
 wa_output-parking = text-003.
ENDCASE.
* Payslip Address
SELECT SINGLE sachn
 FROM t526
 INTO wa_output-payslip
 WHERE werks EQ p0001-werks AND
 sachx EQ p0001-sacha.
PROVIDE * from p0105 between pn-begda and pn-endda.
* Telephone numbers
 if p0105-usrty = '0020'.
 wa_output-telno = p0105-usrid_long.
 endif.
* Email address
 if p0105-usrty = 'MAIL'.
 wa_output-email = p0105-usrid_long.
 endif.
ENDPROVIDE.
append wa_output to it_output.
clear: wa_output.
*END-OF-SELECTION.
END-OF-SELECTION.
describe table it_output lines gd_lines.
if gd_lines gt 0.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
else.
message i003(zp) with 'No records found'.
endif.
*& Form PROGRESS_INDICATOR
* Displays progress indicator on SAP screen
form progress_indicator using p_text.
call function 'SAPGUI_PROGRESS_INDICATOR'
 exporting
* PERCENTAGE = 0
 text = p_text.
endform. " PROGRESS_INDICATOR
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname = 'PERNR'.
fieldcatalog-seltext_m = 'Personnel No.'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
* fieldcatalog-emphasize = 'X'.
* fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'ANREDTXT'.
fieldcatalog-seltext_m = 'Title'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FNAME'.
fieldcatalog-seltext_m = 'First Name'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'LNAME'.
fieldcatalog-seltext_m = 'Last Name'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'ORGTX'.
fieldcatalog-seltext_m = 'Department'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'FTE'.
fieldcatalog-seltext_m = 'FTE'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PARKING'.
fieldcatalog-seltext_m = 'Parking/Metrocard'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PAYSLIP'.
fieldcatalog-seltext_m = 'Payslip Add.'.
fieldcatalog-col_pos = 7.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'TELNO'.
fieldcatalog-seltext_m = 'Telephone'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EMAIL'.
fieldcatalog-seltext_m = 'E-mail'.
fieldcatalog-col_pos = 9.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'POSTCODE'.
fieldcatalog-seltext_m = 'Post code'.
fieldcatalog-col_pos = 10.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-zebra = 'X'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 i_save = 'X'
 tables
 t_outtab = it_output
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT

Steps for creating structural authorization profile using trans. OOSP

Similar Messages

Maybe you are looking for