Steps for cube partioning

hi gurus
can any one tell me detail steps for cube partioning .And what is the use.
regards
karan

Follow these thread
Partitioning of the Cube
http://help.sap.com/saphelp_nw04s/helpdata/en/0a/cd6e3a30aac013e10000000a114084/frameset.htm
Partitioning Fields and Values
partition of Infocube
Partitioning of cube using Fiscal period
Infocube Partition
Khaja

Similar Messages

How to create infopackage for Cube to Cune to transaction

HI Experts
I have performed following steps for cube to cube load.
1. Created source cube and loaded the data from R3
2. Created Destination cube
3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource. its not showing up any name with 8ZFIGL_C01.
Kindly let me know how to create infopackage for this to laod the data from cube to cube.
Additional information:
I have set the optopn Display Generated Object in Settings.
Thanks in advance for your help.
Regards
NLN

Hi,
Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
See solution from SAT:
Problems with Infosource Data Marts
Best regards,
Frank

Bi 7.0 for cube and master data steps

hi friends,
can u give me step by step comparision between bi 7.0 and bi 3.0 for cube ods and master data, ple explaing me what are the steps difference for those in bi 7.0 .
and reporting is same or any difference in bi 7.0 .
other than sap.help.com material, if u have any other or any screen shots. ple send me.
Thanking u
suneel.

what abt master data, in master data we are using only transfer rules, here also we are using transformation and dtp again.
Yes we would be using transformations and DTP's on the masterdata too. but the system would prompt to make IO a infoprovider in order to use the new functionality. There is another work around for it, but we can discuss it later, orelse search the forum for that option, i have replied to couple of questions regarding that.
what abt reporting any things other than calculated kf restricted kf, filters rows columns, free chaststics, variables, any chnages in screen.
The basic functionality of all the above mentioned objects havent changes, and the query designer itself, there are hell a lot of changes in the appearance and it will take a while to get used to it and find your way with all the functionalities.
i have doubt bps menas businees planning simulation what is this, bec i have idea we can use transactional cube and transactional ods for write accress for planninmg also
BPS is something I have no clue abt... (you dont see me answering in Business planning forum)

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

Steps for Data extraction from SAP r/3

Dear all,
I am New to SAP Bw.
I have done data extraction from Excel into SAP BW system.
that is like
Create info objects > info area> Catalog
--> Character catalog
--> Key catalog
Create info source
Upload data.
create info cube
I need similar steps for data extraction for SAP R/3
1. when data is in Ztables ( using Views/Infosets/Function etc)
2. When data is with Standard SAP using Business Content.
Thanks and Regards,
Gaurav Sood

hi,
chk the links
Generic Extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
CO-PA
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
CO-PC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
iNVENTORY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
LO Extraction:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Remya

How to enhace business content extractor for cube in production

Hi All,
I want to run report based on 0MATERIAL on two cubes 0PCA_C01 and ZCOPC_C08. I dont have 0MATERIAL in cube 0PCA_C01.
Both of the cubes are in production. I am trying to enhance the data source 0EC_PCA_1 (for cube 0PCA_C01) to bring in 0MATERIAL.
> Is this the right way to do it?
If it is then, do i need to write the code in funciton module after appending the 0MATERIAL fields to the
data source. does any body have the code or plz help me step by step to write the code in CMOD....which tables should i go to get the 0MATERIAL.
> Most importantly, does enhancing the datasource 0EC_PCA_1 with omaterial affect the omaterial in the datasource for my second cube (can the same infoobject be in two data sources..bcoz master data is common for all cubes)....
I want to do this right....as both the cubes are in production.....plz help me..
Plz address any issues like data loss bcoz of enhancing datasource in production or something like that
thanks in advance,
> useful inputs will be rewarded

Hi Aravind,
You need to have a foreign key relationship with the base data to material to bring material no as a transaction data. There has to be a link from where you can extract the data. FIrst you see if this link is available in any other ods in BW itself. For example, if you have the vendor details in your cube, see if you can get the material from the AP ods. this depends on your implementation.
If you do not drop the cube load, how will this value be updated to the old data. Assuming you are doing deltas, the new records coming in will have this data filled but the data that already sxisted will not have this data. So, I think you will need to drop the load.
I know the amount of data could be huge but if you have to get the data from R/3 (this is if the data/link i mentioned above is not available in BW), you have to enhance the data source. In this case, you can not avoid datasource enhancement.
You can create a Zmaterial and load it from 0material. This will not help you. By doing this, you will be creating another master data. Even if you include this master data zmaterial in your cube, since you can not map it in the update rules, it will not help you. See if you can lookup this value from some other ODS.
Hope this helps.
Thanks and Regards
Subray Hegde

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Delta and Full Load question for cube and ODS

Hi all,
I need to push full load from Delta ODS.
I have process chain.... in which the steps are like below,
1. R/3 extractor for ODS1 (delta)
2. ODS1 to ODS2 (delta)
3. ODS2 to Cube ---> needs to be full load
Now when i run process chain by further processing automatically ODS2 does init/delta for Cube.
How can i make it possible for full load ??
can any one guide anything in this ?
Thanks,
KS

Hi,
1. R/3 extractor for ODS1 (delta) : This is OK, normally you can put the Delta InfoPack in Process Chian
2. ODS1 to ODS2 (delta): It automatically flow from ODS1 to ODS2 (you need to select Update Data automaticall in the Targets at the time of ODS creation)
3. ODS2 to Cube ---> needs to be full load :
This you create a Update rules from ODS1 to Cube then Create InfoPackage in between ODS2 and Cube then do full loads. You can delete the data in the CUbe before the load ann dthen do Full load to Cube.
Note: In ODS2 don't select Upadate Data autmaticlly to Data Targets
Thanks
Reddy
Edited by: Surendra Reddy on Nov 21, 2008 1:57 PM

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Step by step for 2.6

So I think im finally ready to make the plundge to the 2.6 kernel.
So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
Any help would be appreciated.
Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

You have to use module-init-tools which supercedes modutils. I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted. However, you still need the old modutils as well.
Here is my hack to get module-init-tools working:
1. Use the PKGBUILD below to compile and install module-init-tools.
2. For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc. To find where these binaries are, use "pacman -Ql modutils".
3. Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides. Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
Example - modutils provides /sbin/lsmod. Rename that to /sbin/lsmod.old. module-init-tools provides /usr/bin/lsmod. Create a symbolic link as follows:
[root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system. Also, this is more of a hack, and that's why I didn't upload the package to incoming. I only made the PKGBUILD to keep track of where everything was going.
Anyway... hope this helps you on your way to:
[john@limbo john]$ uname -r
2.6.0-test5
[john@limbo john]$
PKGBUILD
pkgname=module-init-tools
pkgver=0.9.13
pkgdesc=""
url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
depends=()
conflicts=()
backup=()
install=
source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
make prefix=$startdir/pkg/usr install

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

ENT-06954: Error while Displaying BIBean for Cube/Dimension Dataviewer.

Hi all,
I have defined a cube with three dimensions. All elements are deployed and the mappings is executed successfully. If I try to open the dataviewer either for the cube or for the dimensions I receive the following errors:
ENT-06954: Error while Displaying BIBean for Cube Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
In another warehouse this function works properly. I am using OWB 10gR2 (10.2.0.1.31).
Any hints to fix this issue would be appreciated.
Thanks in Advance, C.

If you run OWB using the supplied shell script or batch file are there other errors on the console before the exception. OWB uses a component (OLAPI does some validation over and above any other) which dumps the errors on the the standard output which often illustrates some invalid metadata in the OLAP catalog.

Steps for cube partioning

Similar Messages

Maybe you are looking for