Steps for extraction of Custom Fields from the SRM 5.0 to the SAP BI system

Hi Experts,
I am new to the SAP BI. I was asked to publish all the custom fields from table (BBP_PDISC) of the SRM system to the BI System.
Please provide some guidiance (or) provide me with step-by-step procedure for doing the same.
There are around 14 fields in this table and i need to move them to the BI system and later inlcude them in reports.
Let me know if this information is sufficient.
Thanks in advance.
SAPBWI

We are working on the Shopping cart DSO

Similar Messages

Steps for replicating GR custom field values from EBP to SAP R/3

Dear SRM Gurus,
We wre using SRM 5.0 extended classic scenario..
We are having 3 custom fields for GR in SRM, we want to replicate these values to 3 other standard fields in SAP R/3..
Can you pls tell us the Procedure, Steps and standard objects that has to be changed for replicating the GR field values from SRM to SAP R/3(4.6C).
Thanks in advance,
Chandra Sekhar.

Hi
<b>Please go through the following links -></b>
Re: Confirmation screen field to be mapped to backend field
Re: Creating Confirmations in SRM - What is the preferred method
Re: GRN IDOC Transfer to ERP - MBGMCR01 ( 2 IDOCS created)
Re: Problem to send idoc for a Good Receipt created
GR IDOC Number
Re: Idoc error in Goods confirmation - urgent
Re: Delete goods confirmation in SRM3.0
Re: SRM / MM integratuion: goods receipt
IDOC MBGMCR01: CO Ctd-pedido exceeded by 1 UN:
<b>Some useful SAP OSS Notes to refer -></b>
Note 521488 - FAQ: MB_CREATE_GOODS_MOVEMENT
Note 521427 - FAQ: IDocs for goods movements
Note 521488 - FAQ: MB_CREATE_GOODS_MOVEMENT
Hope this will definitely help.
Regards
- Atul

Deleting AET custom field from the SAP tableu2019s level.

Hi experts,
I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
Thanks in advance
Chand

Hi,
The deletion of custom field in AET happens in two steps:
1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
Doing this, you mark the selected custom field to be deleted.
2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
Regards,
Steve

Config steps for one time customer

hi,
sap gurus,
can i have the configuration steps for one time customer.
regards,
balaji

Hi,
One-time customers
Customers who only enter into a business transaction with you once are called one-time customers in the R/3 System. It is not necessary for you to create a customer master record for individual one-time customers, since you no longer need this master record after the business transaction has been carried out, and it would use up storage space. You create collective master records for one-time customers.
Use
A collective master record refers to a dummy customer and includes only the data that is identical for a certain group of customers.
You create a collective master record for all customers in a certain region. This collective master record could include fields such as:
Master record name
Language
Currency
Sales office processing the customer data
If a one-time customer from this region orders goods from your company, you use the customer number of your collective master record when processing the sales order. Only in the sales order itself do you enter the address and all other data not given in the collective master record.
Structure
When you create a collective customer master record for a one-time customer, the account group CPD for one-time customers is automatically proposed by the system. This ensures that you can access screens from different partner functions (sold-to party, ship-to party, bill-to party, and payer) relevant for one-time customers. However, only fields that can be identical for all one-time customers are displayed. For example, all address fields are suppressed, since the master record is collective for data on several customers, all of whom can have different addresses.
On the following screens you can enter a limited amount of data in a collective master record for one-time customers:
Address
Sales
Shipping
Billing
Messages
Integration
The account group can restrict the number of screens accessed in the collective master record for one-time customers even further. If only some of the screens and fields for one-time customers are relevant for your company, change the account group CPD or set up a new account group. This is done in Customizing for Logistics Basic Data: Business Partners in the activity Define Account Groups and Field Selection for Customers.
regards
sadhu kishore

Replication of Custom Fields from CRM to ISU and Vice versa

Hi Experts,
We are working on adding Z fields on BP level. For this how does the replication of the values takes place from CRM to ISU or vice versa. What are the middleware enhancement we need to do in CRM side or in the ISU side. We would add the fields on web UI crm side by AET but at ISU side how we need to do that and how would the field values replicate in both the system.
A approach for adding BP custom fields in CRM and its interaction with ISU and vice versa would be appriciated.
Thanks,
Mayur

Excuse, you may enter more in detail?
I have created a custom field on BP using the AET would now like to replicate this custom field in BP also in ISU.
I can do all this using the EEWB, but I would avoid it, since, in ISU we already have custom fields on BP, I just can not link them with CRM.

Custom fields from SRM PO to R/3 - missing values

Hi,
As part of the extended classic scenario when the PO is being transferred to backend we are sending couple of custom fields ( added to append structure CI_EKPODB in EKPO table ) in the item table .
We are doing this for ECC 6.0 and 4.7 backend versions.
ECC 6.0 works fine i.e, the custom fields gets properly replicated ( updated in EKPO table )
4.7 --> It doesn't work.
In R/3 we have maintained the correct mapping in BBP_CUFMAP table.
Any ideas what is the issue with 4.7 version.
Note : SRM uses BAPI " BBP_PO_INBOUND" FM in R/3 to replicate
Thanks,
Krishna.

Hi Kumar,
Sorry for the late reply. I have the solution for this question.
For copying the custom fields code is to be written in the BADI "BBP_ECS_PO_OUT_BADI", method "BBP_B46B_PO_OUTBOUND". This BADI has both ECC PO fields and all the SRM fields(including the custom fields added in PO and SC) in separate structures.IS_HEADER, IT_ITEM etc has all the SRM PO values. CS_BAPI_POHEADER, CT_BAPI_POITEM etc has ECC PO values.
There are two function modules, BBP_PD_PO_TRANSFER_EXEC and BBP_PD_PO_TRANSFER_EXEC_V2. Execute these function modules with the GUID for PO after PO change or create in SRM system. Once the FM is executed the BADI will be triggered and the additional functionality carried out and PO replication from SRM to ECC happens.
Hope this helps you. Please let me know if you need any more information.
Thanks,
Deepthi

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Copying custom fields from SRM PO to ECC PO standard fields

Hi All,
There are three custom fields which are added in SRM SC and PO at item level. My requirement is to map these three custom fields to three standard fields in ECC PO. Can any one please explain me, how the replication of SRM PO to ECC PO happens? I could find a function module "B470_PO_CREATE". Can any one tell me through which transaction or program this FM will be triggered.
Any useful answer will be rewarded
Thanks,
Deepthi

Hi Kumar,
Sorry for the late reply. I have the solution for this question.
For copying the custom fields code is to be written in the BADI "BBP_ECS_PO_OUT_BADI", method "BBP_B46B_PO_OUTBOUND". This BADI has both ECC PO fields and all the SRM fields(including the custom fields added in PO and SC) in separate structures.IS_HEADER, IT_ITEM etc has all the SRM PO values. CS_BAPI_POHEADER, CT_BAPI_POITEM etc has ECC PO values.
There are two function modules, BBP_PD_PO_TRANSFER_EXEC and BBP_PD_PO_TRANSFER_EXEC_V2. Execute these function modules with the GUID for PO after PO change or create in SRM system. Once the FM is executed the BADI will be triggered and the additional functionality carried out and PO replication from SRM to ECC happens.
Hope this helps you. Please let me know if you need any more information.
Thanks,
Deepthi

CNMASS - Ability to apply custom fields from structure CI_PROJ

Hi,
Is there a way to add fields from the Customer Enhancment tab in structures CI_PROJ, CI_PRPS to CNAMSS transaction?
thanks,
Cathy

Hi,
I have the same problem. I want to change a customer field (from structure CI_PROJ) via trx CNMASS. But the fields of structure CI_PROJ are not provided.
Is there a standard possibility to extend the table CNMASS_PROJECT_DEFINITION with the structure CI_PROJ? I donu2019t want to modify the SAP table CNMASS_PROJECT_DEFINITION.
Of course I know that I can write a program ore use trx LSMW but I'm looking for a more suitable and comfortable solution.
@Cathy: did you find a solution in standard?
Thanks in advance for any hint!

Addition of custom fields in Contract and mapping it with the fields in SRM

Hi all,
A custom field should be added to bid invitation in SRM and mapped to a custom( Z field) field which is present on the contract header screen in R/3 backend. Is it possible to map these custom fields. The custom field which is in the backend contract is a mandatory field for creating a contract in the backend. It is not getting filled so the contract is not getting created in the backend. One solution which we thought of was to create a csutom field on bid invitation and pass the value of the custom field to backend by concatenating it to any of the standard field ehich is getting passed to the backend and then splitting the standard field and retrieving the custom field value and restoring the standard field value. If you think of any solution do let me know.
Regards,
Asha

Hi
Pls refer to the following thread for more details
Custom fields not display in SRM5.5 Basic Data Frame
Custom fields not display in SRM5.5 Basic Data Frame
Hope it helps.
Pls reward suitable points.
Regards
- Atul

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Extraction hierarchies and fields from the logical layer

Hello all !
I build a repository and I would like to ask if it is possible to take an extraction of the names of the hierarchies and fields of the business layer that are mapped to the tables and fields of the physical layer. Because now my model is quite big and I want to create a file that I can follow my logical layer that is mapped to the physical layer.
Thank you in advance!

better to go for Repository Documnetation from utilities,it will give you the complete info of ur RPD

Copying the value of customized fields from one order to other in CRM

Hi ALL,
We have added new customized fields in web ui for Sales Order.
Now when we are using the standard COPY functionality to copy one particular sales order, then all the fields are getting copied into new order except the customized fields which we have added.
We have created new data elements for our fields and added it by EEWB transaction.
Please let me know if there is any badi or any other way which we can implement so that our customized fields are also copied.
Thanks,

Hi!
BADI "CRM_COPY_BADI" is the one you are looking for.
Create badi implementation and assign copy routine to the copy management parameter.
The parameter can be configured via IMG->CRM->Transactions->Basic settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types.
I hope it helps you.
Regards,
Fukuhara Yohei

Steps for extraction of Custom Fields from the SRM 5.0 to the SAP BI system

Similar Messages

Maybe you are looking for