Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

Similar Messages

Delivery cost for Stcok transfer through M.type : 351

Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu

Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc

Lenovo Thinkpad X1 - Extremly slow file transfer through e-sata

Hi there! I have got another issue with my notebook - the file transfer through e-sata is extremly slow (about 5MBpS). Using Windows 7. Where could be the problem? Thanks.

Hi Gabbi,
thanks for posting. You might want to check in your control panel which Lenovo preloaded software are installed. One software which I've seem has caused this issue is the Lenovo Rapid Shield and and Lenovo Airbag Protection.
Could you try disabling them and check for the changes.
do let me know..
regards

Which protocol we should use for file transfer in ios ?

which protocol we should use for file transfer in ios ?

My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

Hi Recently i have upgraded developer 6i by applying patches.
After when i am trying to submit active users and active responsibilities.
Those also getting completed
But when i am trying to click button view output or view log
I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
Can anybody tell me what is the issue. Waiting for your reply
Ganesh

I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

Slow Transfer Speeds For File Transfer Manager 5.0 Build 0032

I have a 20Mbit internet connection. When I download from the Microsoft download site I can get files downloading at reported speeds of up to 1.7 Mbytes per second.
When downloading from the TechNet Benefits section I have to use the Transfer Manager and I can only get speeds that vary between 30-80 Kbytes per second. Rarely any faster.
I am using XPPro & IE7 straight out onto the Internet via my router / firewall. No proxy server.
What can I do to speed the process up or bypass the File Download Manager?
Regards.

Thanks for your feedback Tekky. FYI there is also a forum specifically for TechNet Website Feedback which is the more appropriate place for TechNet Subscriptions questions at http://social.technet.microsoft.com/forums/en/tnfeedback/threads/
There are many suggestions in this post about improving your network speeds when downloading from MSDN and TechNet subscriptions sites. Here is one more place to look for tips, which we have linked to from our Downloads and Product Keys FAQ (MSDN version, TechNet version):
The website for the Microsoft File Transfer Manager, particularly their troubleshooting page which includes additional discussion on configuring the FTM and on slow transfer speeds.
As Julie stated above, you can call TechNet Customer support and they can take you through some additional troubleshooting and diagnostic steps to assist. Julie has linked to the support phone numbers in her reply.
Thanks,
Mike Kinsman

Issue in Flat File load through FTP set up

Hi All,
I am trying to load the flat file using FTP set up ( through process chain ).
I put a file in the FTP server, the file is being picked up from the FTP server but I cannt see the same in Interface file manager (ZIFM) under unfinished or comleted jobs.
I am not able to understand where is the eror?
any suggestion for this would be of great help.
regards
Amol
Edited by: Amol Jaiswal on Nov 8, 2008 12:33 PM

i don't get you.
You are trying to FTP a file to your application server in your process chain; is that correct?
Marco

Alert Configuartion for File Transfer

Hello,
I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
Thanks.
Regards,
Mayank

Hi,
With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
Refer
XI : How to Re-Process failed XI Messages Automatically
XI : How to Re-Process failed XI Messages Automatically
XI: Alerts - Step by step
The specified item was not found.
For successfull messages there will not be the alert notification available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
Thanks
swarup

IM System File Transfer through NAT

Hi, i have operational IM system with server and client and i want to implement file transfer. Not that it was any difficult but i want to make it server independent to relieve it.
What i want to is establish direct connection between transferring clients. The problem is, how to deal with guys behind NAT.
I have seen many topics here and on other forums dealing with it but they were direct questions in advanced development of this issue and i want to ask if there is any way to do it without reconfiguring the client routers (some of them behind IPS's Gateway and owning own wifi router) or not. I would like to know your ideas or experiences on this matter how start with this or where to look for it. I certainly dont want to do some ip tunnelling through RMI or similar.
Regards ~

When connecting possibly NATed peers, there are three main scenarious:
* All peers have a public IP, no NAT anywhere: Easy, simply connect
* At least on peer has a public IP, no NAT, some or all other peers are NATed/don't have public IP: public peer acts as a server of kind/hub
* Everyone is NATed: not it's getting very, very tricky.
Especially for the third kind you will need to implement several different techniques.
Keywords to google for are UPNP (to reconfigure the router for port forwarding) and NAT piercing (fooling both routers to think it's an outgoing connection).
Good luck.

Plz hel for file transfer using zmodem protocol

someoe plz help me. i have to devlop an application that transfers files betwn 2 pcs(both ways) using dial up connection, further it should autodial the connection at periodic times.
i am trying to use Zmodem file transfer protocol. i succseed in sending string (for test)using my sender program with hyper terminal open on the other hand. it prints the string. but when i use my receive program, similar to given in samples(simpleread.java) it doesnt work.
actually when the ring comes from the sender how to send command to modem to hang up and connect to the calling pc if there are any such commands then plz help.
----sameer

someoe plz help me. i have to devlop an application
that transfers files betwn 2 pcs(both ways) using dial
up connection, further it should autodial the
connection at periodic times.
i am trying to use Zmodem file transfer protocol. i
succseed in sending string (for test)using my sender
program with hyper terminal open on the other hand. it
prints the string. but when i use my receive program,
similar to given in samples(simpleread.java) it doesnt
work.
actually when the ring comes from the sender how to
send command to modem to hang up and connect to the
calling pc if there are any such commands then plz
help.
----sameerU ddnt abrvt nuf. I r3r1t 4 U.
Sum1 plzz hep m3. i 1/2 2 dvlop app taht xfer fil betwn 2 pcs(bth wys)...

8900 to imac bluetooth connection for file transfer

Hello, I have a brand new curve 8900 javelin and a new IMAC. Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects. Can someone please tell me how to overcome this problem?
thank you

That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

Bluetooth - any hope for file transfer in near future???

Hi,
Presently iPhone 4 does not allow bluetooth file transfer to other mobile devices and even my PC.
I am not interested in illegal music/video transfer but genuinely transferring my data files between pc and other mobile devices and use it like a mobile storage device. I don't like the idea of mailing my file and then downloading it again when I have both devices in my hand! It's not helpful when other devices do not have internet connection or limited internet usage.
Please let me know if apple policies would allow it to make file transfer possible in near future (except music and video). Otherwise it would greatly reduce its usability for me.
*I hate its file storing and transferring features.*
*Another reason for hating iPhone is 'Flash'.*
Apart from this, its simply superb.
agmad

Hoekstes wrote:
Why is something so simple its available on 10 year old Nokia 3310 bricks not available on an iPhone. Its ridiculous.
Because there is nowhere to put the files on an iPhone. There is no common file storage area on an iPhone that all apps can access. Each app sits in a sandbox for security purposes. Each app can only access its own files. You would have to have an app running where the files would go, and then the files would only be available to that app.
The old Nokia has a common file area and does not have the security the iPhone does, but then 10 years ago you probably did not need the security.

TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

I have a dell laptop and a mac book air, both connected to my TC. Transferring files is a joke. I am a novei mac user. How can this slowness issue be fixed for both the pc and mac? As I am writing this, i am currently doing a software update on my macbook air, getting 10.5.3 now. Does this solve it?

Similar problem here.
iMac using 802.11n to connect to time capsule. Time capsule configured to use 802.11n (b/g compat), and WPA/WPA2 security.
Typical transfer rate (file transfer from imac to tc) of about 2Mbps. After reboot of the TC, speed can sometimes hit 6Mbps.
I have played with the security settings. After a softboot with new config:
- no security, 802.11n mode: 12Mbps throughput
- WEP security, 802.11n mode: 8Mbps
- WPA/WPA2 security, 802.11n mode: 6Mbps
Enabling interference robustness seems to have little or no effect.
All of these speeds are significantly lower than what I'd expect.
No other devices were on the wireless network during the testing.
I've read that alot of others are having similar issues. I suspect that most of these devices are running extremely slowly, but most people aren't bothering to check throughput.
Would love to know if there is a real fix out there. 802.11n should be much much faster than this. If I could reconfigure the TC to use 802.11g, I would.

Save a copy of file sent through FTP Send Port

How can we save a copy of the file sent through an FTP Send Port?
Here are the details of the scenario:
1. I have an Orchestration which after processing, creates a Flat File
2. Orchestration has a Static One Way Send Port with specify later
3. FTP Send Port is bind to the orchestration
Problem is, I don't want to create an extra file send port in the orchestration.
Requirement is:
When orchestration send the flat file to FTP, I want a copy of the file in a local file location.
BizTalk Specialist

Create a Send Port Group with the two ports in question and bind your orchestration to the Group.
Alternatively you can leverage the BizTalk Archiving Pipeline component from codeplex at
http://biztalkarchiving.codeplex.com/ and use this pipeline on your existing send port.
Regards.

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
<b>import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;</b>
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

Steps for File Transfer through FTPS...!!!

Similar Messages

Maybe you are looking for