Steps for Getting Repository Reports to Work in SCM 9024

Have installed Des9i/SCM 9024. With this install, repository reports are not installed without the base release of O9iDS R2. What are the exact steps for getting the Designer Repository Reports to work via the RON in SCM 9024? Basically, I would like to have the Repository Reports option 'enabled' in the RON.
Does 9iDS 902 have to be installed in an Oracle Home first, and then install SCM into the same OH? I would rather not have to install the entire iDS just to be able to have object reporting in SCM.
-- Al

Hello Joe Matheis. Welcome to the Apple Discussions!
Let's double-check your AirPort's configuration for streaming iTunes ...
Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX

Similar Messages

Steps for Creating a Report in Oracle Apps

I need the steps for creating a Report 2.5 in Oracle Apps.
Please let me know the steps involved in detail
Regards
Choudary

First you create the report using reports 2.5. (You need to refer Application Developer's User Guide to understand Apps standards for customization)
Then register the report in Apps:
1) Define the executable
2) Place the executable in the appropriate directory (You need to refer Apps installation guide to find the directory structure for placing reports)
3) Define the concurrent program (Pay attention when you define program parameters and value sets associated)
4) Attach your report to the request group attached to your responsibility
5) Run the concurrent program using SRS (you will not see the report when you open Submit Requests Form, if you do have permission)
The above procedure is applicable if you are defining the report directly in your instance. If you are using chain link, then you may have to migrate the objects appropriately.
Some of the above activities are usually done by System Administrator and users are not given permissions.

Restful sample with Java for getting WebI report info in 4.1

Hi All
Can anyone give me a sample code in JAVA for getting WebI report information using Restful services in 4.1 SP1 Version
Thanks In Advance

Hi All
Im unable to execute the below URLs and getting error
/documents/{documentId}/reports/{reportId}/elements/{elementId}/properties
/documents/{documentId}/reports/{reportId}/elements/{elementId}/datapaths
/documents/{documentId}/reports/{reportId}/elements/{elementId}/dataset
/documents/{documentId}/reports/{reportId}/elements/{elementId}/axes/
/documents/{documentId}/reports/{reportId}/pages
/documents/{documentId}/reports/{reportId}/inputcontrols
/documents/{documentId}/reports/{reportId}/
Errors:
Not found. (RWS 00056)
Not acceptable, (RWS 00058)
Any Suggestion Please.

Steps for a Z-report

Hi Gurus,
I'm trying to join 2 different tables for that report. Can anyone give me the basic steps for developing a Z-report ?
Thanks

Moderator message - Basic question - post locked
Rob

Tax collected at source (TCS)- steps for getting TCS certificate

Hi,
I have configured for Tax collected at source for customers. I posted one customer invoice through FB70.
I need to give TCS certificate to the customer.
I tried to do   J1INCHLN for remitting TDS challan. but it says no line item exist.
What are the steps for generating TCS certificate.
Thanks

Hi,
Just wondering can any one proivde me TCS config steps as i have done config for TCS for Indian comp code but WHT calculation is not working as it need to be.
Example Invoice amount is 100000
01      Customer   98900
50      GL             96153.85-
50       VAT 4%   3846.15-
40      TCS 1.1% 1,100
The above calculation is wrong its calculating on Invoice amount 100000 but it should calculate on 96153.85 and total of invoice should be 100100.
I tried all option like calclation on Net amount, Gross amount, Modified amount in WHT type config.
Please let me know if any thing need to config at Pricing procedure for this.
You help is much appriciated.
Thanks for your help in advance.
Regards
Srini

Re: Best fix for getting PNGs alpha to work in IE?

On 20 Sep 2006 05:56:53 -0700, [email protected] in
macromedia.fireworks wrote:
<snip>
>There is the obvious problem of lack of Alpha support on
IE 5 & 6 but
>this can be cured with javascript fixes.
>One Ive found is Bob Osola JS fix, the problem with this
relies on the
>user having JS turned on and it doesnt work on PNGs used
as a CSS image
>background.
>Can anyone recomend another method(s)?
>Ive heard that you can embedd some code in a CSS rule
relating to
>getting PNGs alpha to work but cant find anything on the
net?
How about this;
<
http://www.scss.com.au/family/andrew/webdesign/pngbehavior/>

first, click file>publish settings>swf and tick "permit debugging". you will then see the line number of the problematic code in the error message which should speed your debugging substantially.
but that first message looks like you do NOT have an object in your library with class name Sight or you have some other class Final that's being used (and extends Sprite and is not dynamic).

UI defaults for LOV on report not working?

Hello,
I have a table called CUSTOMERS and an associated lookup table called DISCOUNT (each customer is associated to a discount level).
I defined a complete set of UI-defaults for CUSTOMERS, containing a LOV-definition for the column DISCOUNT_ID (which is the FK to DISCOUNT).
I specified that DISCOUNT_ID is to be "displayed as text(based on LOV)" as a report default.
APEX (3.1.2) seems to ignore that completely when I create a new report and agree to use the UI defaults.
I always get a column displayed as "standard report column" and no associated LOV.
Am I doing anything wrong?
Strangely, the similar setting for (tabular) form defaults works fine.
Thanks in advance for any hint!
Ingo

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

Documentation for getting Webcenter PS4 to work with Exchange Server 2010.

I have a customer who has Microsoft Exchange Server 2010 and wants to have their e-mail in WebCenter Spaces app we have built, using 11.1.1.4 or 11.1.1.5. Do either of these support Xchange Server 2010? Probably not, right? Well has anybody done it and been able to get it to work? Is there any documentation out there that tells how to do it?
Thanks,

This documentation is great. Thanks,
Is there any documentation on this for 11.1.1.6? (PS5)? The documentation you gave me is 11.1.1.5 and it shows Exchange Server 2007. My customer has Exchange Server 2010. Do you know if 11.1.1.5 and/or 11.1.1.6 supports Exchange Server 2010?
Again, thanks for your help.

Is there a step by step guide for getting splash on arch?

hi,
i looked every where for a step by step guide for getting splash on bootup working on arch.
i know if you use archlinux you're suppose to figure out things for youreself, which i handle pritty well i think, but kernel stuff, i am not sure for now, and i dont have time (exams) to break my system so if anyone could point me to a step by step guide, i will thank him.

AFAIK there isn't a way. I tried to get fbsplash working recently without much success.
There were a few rather complicated methods, and I thought the easiest way was to use an initrd image. Obviously, the default kernel already uses one so I recompiled a kernel to have support for an initrd image, but not need to use one. Then I used splashutils to create an initrd image with the splash image contained and booted the kernel using this as an image. Kernel booted, but no splash. I then gave up. I also had to patch the splashutils scripts as they were broken in places. Right at the moment, I don't crave a splash image enough to warrant more hacking.
fbsplash is meant to work without the fbcondecor kernel patch, so I didn't try using it. This may be a path you want to try out.
Last edited by dyscoria (2008-06-30 08:29:58)

How to get GD library to work on 64-bit server.. tips...

After several days struggling, I have successfully managed to install the GD libraries on Leopard 64-bit Xserve and I want to share my experience.
First, I’m NOT AN EXPERT but I hope this posting may help people !
Just a reminder, my experience is for a 64-bit SERVER running PHP Version 5.2.4, MySQL 5.0.45. Apache 2.2 (all out-the-box Leopard functionality).
The instructions/tutorials for doing this can be found at: http://osx.topicdesk.com. You will need to follow (1) “Installing GD on OS X Server 10.5.x” and (2) “Adding the GD Extension to PHP5 on OS X Server 10.5.x”. These are VERY WELL WRITTEN and CLEAR, WELL DONE topicdesk.
However, as the instructions clearly state you need a “basic understanding of the terminal”.
For the 64- bit build, you need to set various shell variables, e.g. MACOSXDEPLOYMENTTARGET, CCFLAGS. These are used by the “configure” script.
Now, a quick lesson in UNIX. UNIX has several shells or command-line interpreters, for example sh or bash, and the way variables are “passed across” to scripts differ.
This is important and is the clue/magic for getting the instructions to work for 64-bit. YOU NEED TO ENSURE THE VARIABLES ARE BEING PASSED ACROSS TO THE SCRIPT by (in my case for bash) using the export command.
These were MY steps, they worked for me:
1. I logged in as root (shock-horror) using su.
2. I switched to the bash shell by typing the command bash.
3. Using the topicdesk documentation, I then created the following script called “gd_setenv.sh” to set up the shell variables. NOTE the “export” at the end of the line ! I also had to remove a spurious space in one of the parameters.
MACOSXDEPLOYMENTTARGET=10.5; export MACOSXDEPLOYMENTTARGET
CFLAGS="-arch ppc -arch ppc64 -arch i386 -arch x86_64 -g -Os -pipe -no-cpp-precomp"; export CFLAGS
CCFLAGS="-arch ppc -arch ppc64 -arch i386 -arch x86_64 -g -Os -pipe"; export CCFLAGS
CXXFLAGS="-arch ppc -arch ppc64 - arch i386 -arch x86_64 -g -Os -pipe"; export CXXFLAGS
LDFLAGS="-arch ppc -arch ppc64 -arch i386 -arch x86_64 -bindatload"; export LDFLAGS
4. Your will then need to make the script executable by chmod +x gd_setupenv.sh
5. Now run it. NOTE THE SPACE AFTER THE FIRST DOT. This will set the variables up in the current shell environment.
bash-3.2$ . ./gd_setup.env
6. Check it (note the dollar sign at the start of the variable name !). This should display 10.5
$ echo $MACOSXDEPLOYMENTTARGET
7. Follow the topicdesk instructions. DO NOT LOGOUT or exit the bash shell between steps as this will loose the shell script variables.
8. As per the topicdesk instructions don’t forget to edit the php.ini file.
I hope this helps,
john
p.s. once again I'd like to thank topicdesk for their VERY USEFUL tutorials.

I think you need lib32-gtk-engines.
EDIT: Never mind doesn't work for me either, lib32-gtk-engines fixes only the wrong elf class message.
Last edited by Celar (2010-07-18 03:22:41)

ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?

Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath

RFC / BAPI for getting Directly Subordinate Employees

Hi Experts,
I have a simple query. Do we have any standard RFC or BAPI in ABAP which will take the pernr of Manager as input and return list of all subordinate employees.
In fact, I am developing one MSS report. In this report, I have to display directly subordinate employees of the manager.
If standard RFC or BAPI is not available, then kindly let me know how to know the directly subordinate employees of a manager.
Please help.
Regards,
Gary

Hi Bernd,
I followed the below mentioned steps:
1) Read orgeh from pa0001
2) Passed following parameters in RH_STRUC_GET
ACT_OTYPE      O
ACT_OBJID        value obtained from orgeh-pa0001
ACT_WEGID      o-o-s-p
ACT_INT_FLAG
ACT_PLVAR       01
ACT_BEGDA       26.04.2011
ACT_ENDDA       26.04.2011
ACT_TDEPTH      5
ACT_TFLAG       x
ACT_VFLAG       x
AUTHORITY_CHECK     x
TEXT_BUFFER_FILL
BUFFER_MODE
The RFC is returing 2118 records. The Manager have only 13-14 direct report. I changed the value of act_tdepth to 3 and 4. However the RFC is still giving wrong no of records.
I am wondering why SAP does not have a standard RFC for getting direct reports. This is a very common functionality needed for any MSS development/
Regards.
Gary

Step by step guide to config Reports Services 902

Is there a step by step guide to configuring Reports Services in 9ias 902?
I have installed 9iAS 902 Enterprise Edition on Win2k and wish to test Reports 9i output as a JSP.
Can someone provide any pointers?
Regards,
John

John,
I used the Oracle manual "Oracle9IAS Report Services - Publishing Reports to the Web". It was pretty basic and helped me get the report services working just fine.
Deborah
p.s. It is part #A92102-01

I have a imac and a pc laptop set up with my wireless lexmark x7675 printer through my bthome hub network, but cannot get macbook pro to work

i have a lexmark wireless printer, its connected to my imac via wireless bthome hub connection, works fine, so does my pc laptop. but when it comes to connect my macbook pro aswell it wont work. i have installed lexmark drivers on macbook, i have follwed the wireless connection setup and plugged in via usb port. it says it has connected successfully, but it will not print. i had it connected at one point, but would only print if the imac was on, but now it wont even do that.
please help, it seems like instead of connecting through bthome hub it wants to connect to my imac, how do i change this?

Well there would probably be different settings for the wireless.
For example, with a Lexmark printer although I needed to do nothing to get it to work via USB, to get the wifi working I had to use a special setup option for getting the wifi to work on my pc.
You can probably download the manual for your printer from the manufacturers website, and it should tell you how to get it to work with your printer.

Getting RPO reports in OEM

Hi all,
In our client environment we had 11.2.0.2 production database with physical dataguard.we need to generate RPO(Recovery Point Objective) via OEM in the production environment.Is their any steps to get those reports.

That depends on what defines your RPO criteria? This is not standard across the board. Yes, EM can report apply lag, backups, standby's present, but there will be some customization required to create such a report.

Steps for Getting Repository Reports to Work in SCM 9024

Similar Messages

Maybe you are looking for