Steps for http receiver adapter communication channel

Hi
can you please specify steps for http receiver communication channel?
thanks
Prasad

Hi Prasad,
Here's the documentation for configuring the http adapter in the communication channel(rcve):-
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Regards,
Sushumna

Similar Messages

Hi! I need steps for HTTP Receiver adapter

My scenario is like this:
HTTP(HTTP Sender adapter)->XI->File(File adapter).
For this Iam sending the data as payload in the body of HTTP. Now What am i going to do is the opposite of above scenario:
File(FileAdapter)->XI->(HTTP Receiver Adapter)HTTP.
I would like to know what are the steps to transfer a file(xml) from File adapter to XI and from there to Http.
How to send the data using File adapter. Please suggest me some steps.
Hoping a quick response!!!
Thanks in advance!

Hi Datta,
For a HHTP -> XI -> FILE Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for File as a receiver.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for file. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned by Alex. U have to give all the configuration details in the URL.
Regards,
Abhy
Message was edited by: Abhy Thomas

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

Regarding Business System For HTTP Receiver Adapter.

Hi Everyone,
 Which Type of Business System do I need to select For defining HTTP Receiver Adapter.
I am doing File to Http Scenario. What will be my output look like, If i am Sending file as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
 <Message>
 <Id>123456</Id>
 <Head>
 <Id>123456</Id>
 <Filename>sample.xml</Filename>
 </Head>
 <Body>hello</Body>
 </Message>
</ns0:MT_Source_FILE>
Regards,
Varun

Varun,
You can use third party Business system or else you can use Business sevice also.
Take a look at these blogs,
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
Yuga

Envelop header for HTTP receiver adapter

Hi,
In one of the business scenario's XI has to send data to an external party using an envelope header(Sample document to be sent is given below.)
Message-ID:ABC.JavaMail.SYSTEM@ztxwmwspro02
Date: Thu, 16 Oct 2003 17:02:04 -0400 (EDT)
Mime-Version: 1.0
Content-Type: multipart/related
Content-ID: 4bafd2e2-7971-1000-a6a3-0fe8304d0001
x-Date-Sent: 01 Dec 2005 11:26:47 CST referenceId:
x-Document-Type: Error
x-Priority: 5
x-Correlation-Id: 4bafd2e2
x-Request-Annotation: normal
<Order>
<OrderHeader>
 <OrderNumber>
 <BuyerOrderNumber>XXX</BuyerOrderNumber>
 </OrderNumber>
 <OrderIssueDate>20050223T12:00:00</OrderIssueDate>
<OrderHeader>
<Order>
1) How can this be acheived?
2) How/Where can i see the header data of the message that is being sent out by a receiver HTTP adapter?
Regards,
Siva Maranani

hi Siva,
Did you see this link ??
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
it provides good information aboutPlain HTTP: Outbound Channel.
cheers,
Naveen

JDBC Receiver Adapter Communication channel

HI,
I have a scenarion where JDBC is receiver. i would appreciate if someone can provide me required information.
Connection?
Driver?
where do we mentoin database name.
and table name.
how to we avoid duplicate entries.
Jeff

Hi,
>>>>Statement, Table, Access
Statement - jdbc call - meaning one SQL statement
Table - table on which you execute your command (insert, select update)
Action - SQL command - insert, update
for more:
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Communication channel parameters for XI receiver adapter

Hi
I am implementing a ABAP server proxy - to do this, I am creating a XI adapter type - Receiver communication channel so that messages from XI go to ---> the R3 system wherein the proxy is implemented.
I have seen a weblog with a sample defn of communication channel of this adapter type , but the illustration there is not clear enough.
Based on documentation for this in help.sap.com, I have the following questions :
1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
Any pointers on what am I missing here ??

Hi Karthik,
>>1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
Based on 'addressing type' field in XI adapter you can either specify HTTP destination in communication channel or provide all the required details in the communication channel itself.
>>2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
use the URL /sap/xi/engine?type=receiver
Also make sure that your R/3 is set up as a local integration engine for proxy communication..
Check this..
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards
Anand

HTTPS communication using HTTP receiver adapter URL address as Address Type

Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

Hi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
 Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
 Specifications for addressing using an HTTP destination:
HTTP destination
 Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri

Dynamic name for attachment in the Receiver Mail Communication Channel

Hi All,
I want to dynamically set the name of attachment in receiver mail Communication Channel.
Example: IN__9907211000004_4048454000005_20081211_01000000002643
The first two numbers 9907211000004 & 4048454000005 I want to read it from the message
20081211 this is the date and
And againg this number 01000000002643 is read from message.
What is the procedure to create Adapter Module? I am new to Adapter Module.
Any Ideas ideas?
Thank You,
Mukhtar

Hi Michal,
I had a look to your blog and tried to modify according to my requirement.
Here is the code
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.*;
import com.sap.aii.af.ra.ms.api.*;
@ejbHome <{com.sap.aii.af.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.mp.module.ModuleRemote}>
@stateless
public class SetAttachmentName implements SessionBean, Module{
 private SessionContext myContext;
 public void ejbRemove() {
 public void ejbActivate() {
 public void ejbPassivate() {
 public void setSessionContext(SessionContext context) {
 myContext = context;
 public void ejbCreate() throws CreateException {
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
 throws ModuleException{
 try {
Message msg = (Message) moduleData.getPrincipalData();
//creating parsable XML document
InputStream XIStreamData = null;
XMLPayload xmlpayload = msg.getDocument();
XIStreamData = xmlpayload.getInputStream();
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse(XIStreamData);
//finding the tag's name from the Modules tab in the Directory that will hold the attachment's name
String SenderIDTag = null;
SenderIDTag = moduleContext.getContextData("SenderIDTag");
//finding the content of the tag that will be used as the attachment's name (assuming it's the only tag with this name)
Element element = doc.getDocumentElement();
NodeList list = doc.getElementsByTagName(SenderIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
String anIDTag = null;
ReceiverIDTag = moduleContext.getContextData("ReceiverIDTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(ReceiverIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
Date date= new Date(System.currentTimeMillis());
//Add date to the Message
SimpleDateFormat dateFormat= new SimpleDateFormat("yyyyMMdd");
mailFileName += "_" + dateFormat.format(date);
String BillNrTag = null;
BillNrTag = moduleContext.getContextData("BillNrTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(BillNrTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
//creating the attachment
byte by[] = xmlpayload.getText().getBytes();
XMLPayload attachmentXML = msg.createXMLPayload();
attachmentXML.setName(mailFileName);
attachmentXML.setContentType("text/pdf");
attachmentXML.setContent(by);
//adding the message to the attachment
msg.addAttachment(attachmentXML);
 inputModuleData.setPrincipalData(msg);
 } catch (Exception e) {
 throw new ModuleException(e);
 return inputModuleData;
I hope this is right Adapter Module coe for my requirement.
Thank you in Advance,
Mukhtar

Can HTTP Receiver adapter be used for Sync Comm. Pls advice urgent

Hi All,
I have some data present in XI.
I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
Please send blogs/link for it
Regards

Hi Henry,
>>I have some data present in XI.
In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
First let us know this.
Thanks,
Gujjeti

ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS

Hi,
I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
Please suggest how to do it......
Regards,
Sriparna

Can anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
error.Other than alert rule can we configure this.
Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
Can you please help with how do I create this rule specific to File Adapters only ?
Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
Regards,
Abhishek.

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", XXXXX);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

Steps for http receiver adapter communication channel

Similar Messages

Maybe you are looking for