Steps for improvement once after GO LIVE - please help
Hi,
Please advise me about the general steps normally followed once after GO LIVE...that is once after BW system stabilization...any general improvement ideas....Please help.
[email protected]
Advance Thanks
David
Hi David,
Configuration I mean here is nothing but settings which we have done to each data target. Ex. Lets say we have craeted a custom cube, they will check all the dimensions and fact table and see whether they are perfect. They will check whether there is more number of line item dimension which is also not useful. So all these test will be done by SAP and they will suggest if anything need to be chnaged.
Aggreagtes they will check based on the query usage by users and by which field they filter often. So based on that check aggreagtes will be done after go-live its better to build aggregates.
Hope this helps.
Regards,
Bhuvana.
Similar Messages
-
Paid-for apps disappeared after iPhone update - please help!
Hi,
I have just updated and backed up my iPhone, and found that many of my paid-for apps disappeared (e.g. Guardian, Delicious Pro, etc).
I was thinking of sending a formal complaint and claim my money to Apple but thought I would give this Forum a try first.
Many thanks in advance,
TomasHi Ingo2711,
I tried your link but none of the options apply (e.g. my App Store doesn't show the 'Purchased' thing on my iphone4).
I know data and settings are part of the backup but, mate, these apps have not been backed up! Plus, my wife updated her phone last night and the same happened to her!!!!
So annoying.
Please help!!
Tomas -
This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.
-
STEP 2 of verification is NOT working: Please help...
Hi
Firstly I am throughly disappointed by this migration. I was merrily using Yahoo BT for MANY years and my whoe world has been thrown upside down. Getting used to a new platform I can accept and certainly would be happy to try and use - but the migration prcoess itself has been a nightmare.
Can ANYONE help me - the message at the bottom of the screen says I now only have 7 DAYS left after which I will loose my ability to SKIP the "verify your BTid and VERIFY your MAIL account".
Step 1 says PICK A different Email address if you want: easy answer: no - CONTINUE
Step 2 (part 1) says Verify your EMail account: no problem - password entered and verified.
Step 2 (part 2) says Verify your MyBT account/Username: and I enter the password and it says not correct! I have tried everything. I reset the password, after which I checked to see and indeed was able to access MYBT direct - so I know its right, but when I come back to this Step - it keeps saying INCORRECT password.
Please help.
Also, I noticed NONE of my Email Sub Accounts (aliases) were migrated - so I have missed out on ALL my Emails for the last 4 days since Sunday going to there and not forwarding to my Primary account.
Anyone else experience this?Prior to migration my MyBT BTID was not an email address.
During the process of the migration I was offered the chance to set up a BTID or use my current one. Because of the issues I had read on the forum I chose to use my current one but prior clicking on it I signed onto MyBT and changed my BTID user name to my BT email address and the password to the email address password that I was migrating.
I logged out of MyBT then logged back in to confirm that the change had taken effect. It had.
I then continued with the migration process and it all went through without problem and I have had no problems since.
While I am not happy about having MyBT BTID the same as my email address and password I will put up with it for the moment until BT can sort it out and allow them to be independent of one another. -
hi, I reset my iphone 3gs, and it brought an apple logo on the screen so I restored it to version 6.0 but it can not accept a sim or connect to itunes for activation.what do I do, please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!
This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN -
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I have Adobe Acrobat 9 Pro and the serial number. It is asking for an older serial number? Please help?
Hi juneb55782770,
I believe that you have an upgrade version of Adobe Acrobat Pro, in this case it will ask for the serial number of the previous qualifying version.
You can find your old serial number using this link : Find your serial number quickly
Hope this will resolve your issue.
Please reply if you still experience any issue.
Regards,
Aadesh -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.
Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!! -
Hello
I have a problem in calculating the apple id Can you help me please
I forgot answer security questions for your account How can knowledge
Please help
Please reply as soon as possible
I can not buy from camels Store
And the rest of the account balance $25
Message was edited by: lingo azamI think you mean App Store.
Rescue email address and how to reset Apple ID security questions -
How can i send email for suport to rest my questions' please helpe'
how can i send email for suport to rest my questions' please helpe'
You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(109789) -
Screen Blinks for a second straight after login. Please Help!?
First, these are my system info;
Product name: HP ENVY TouchSmart 15 Notebook PC
Product number: F6C80PA#ABG (0 is a zero not an oh)
Keyboard revision: KBC Version 93.51
Total memory: 8.00 GB
Processor name: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
OS Name: Microsoft Windows 8.1
OS Version: 6.3.9600 Build 9600
System Type: x64-based PC
And, these are my graphics drivers installed;
Graphics device 1: NVIDIA GeForce GT 740M
Installed Drivers: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version: 9.18.13.4052
Driver: c:\windows\system32\drivers\nviddmkm.sys
Graphics device 2: Intel(R) HD Graphics 4600
Installed Drivers: igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igdumdim32, igd10iumd32, igd10iumd32
Driver Version: 10.18.10.3304
Driver: c:\windows\system32\drivers\igdkmd64.sys
Current resolution: 1920 x 1080
Refresh rate: 60
so I have this smart alternating switch thingy for my graphics which i suppose that
the screen utilizes either of these two depending on the demand for graphic resources
e.g. it switches on Intel HD graphics 4600 for displaying low-qual and NVIDIA GeForce GT 740M for displaying high-qual
to save power consumption or something that's as far as I know about my display drivers.
My laptop is reasonably new I think it's less than a year old
so i'm a bit overly pissed right now that my laptops showing symptoms of wearing.
so as the title suggests I've been noticing that when I startup and input my password,
and just as I press enter, the whole login screen blinks once very briefly and then loads up the desktop.
I know this seems only a minor issue and surely i have no major problems with running the machine
but I've been seeing forum posts of people having the same issue
and that it's a problem associated with malfunctioning graphics drivers.
So I thought maybe if the screen blinks before loading up the display,
then whatever media that I load up afterwards would not be displayed properly, since the driver is not working properly.
And since I believe that my NVIDIA display drivers are certainly capable of displaying some high graphics material
I thought maybe that I may be trashing the benefits of using a reasonable graphics card by not fixing this problem.
So I was just wondering if there's a way to resolve the blinking screen before startup problem,
which I believe is most likely to be indicating that my machine is not correctly detecting the display drivers installed
and hence is not showing any media as good as they should be showing.
I guess maybe I'll have to re-install the graphics drivers,
but I'm not sure if I would be luckly enough to run a "clean" re-install for "Both" the Intel HD Graphics and NVIDIA Geforce Graphics without confronting any technical disasters (i.e. me wrecking my machine)
So please help me with this!
and if a re-install is needed as such, please provide as many minute details as possible.Hello @Aster_Wales,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how there is an issue of image flickering after you log in to your computer, and I would be happy to assist you in this matter!
To ensure that your notebook's drivers are up to date, I recommend following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). This should help with returning your system's original software and hardware drivers. To update these new drivers, I also suggest following this resource on Using HP Support Assistant (Windows 8).
If you still see your screen flicker after logging in, I recommend performing a system restore to a point before the screen started to flicker. This can be done by following this document on Using Microsoft System Restore (Windows 8).
Should the screen continue to flicker after using a restore point, I recommend performing a backup and recovery of your Operating System. This can be accomplished by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP System Recovery (Windows 8). This should help to recover your system back to factory defaults.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
How do I get rid of the badge app icon on my macbook desktop calendar app?
This icon won't go away and I don't know how to get rid of it in any of the calendar's settings, system preferences etc. Please help!
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
-
HT1751 having problem sync my i phone.... cant get the music from my computer to phone
having a problem getting music from my computer (itunes) to iphone
-
Hi abapers, i am developing the alv interactive report . such that if any user clicks on particular matnr then it has to go for the MM02 Transaction Accounting tab. i should not do BDC. i am using function module called selectio
-
Does wwi supports tiff or png extension of pictogram file
Hello Exper I tried to output .png and .tiff file in wwi but for some reason it is not outputting .png . Any help ?