Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition

can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan

Similar Messages

10gR2 SE RAC installation on Windows 2003

Hello,
I want to install RAC on two nodes with Windows 2003 operating system.
I have the following questions:
Do I need Windows Clustering Software installed before I go for RAC clusterware installation?
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?
Is there any good documentation for RAC installation on Windows platform?
Thanks
J

Hi,
Do I need Windows Clustering Software installed before I go for RAC clusterware installation? No, you dont need any Windows clustering software for implement Oracle RAC.
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?You need install the clusterware pre-requisites before install the Oracle Clusterware, you must see the next documentation. There explain how configure the shared disk and other pre-requisites for Clusterware, for example raw devices and other settings.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/storage.htm#sthref244
Is there any good documentation for RAC installation on Windows platform?Yea, there is a good documentation for RAC Installation on Windows, look the next URL for more information.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm
Luck.
Have a good day.
Regards.

Physical to Virtual Migration Approach for Exchange CCR 2007 on Windows 2003 Ent Edition

Hi Team,
I am running Two exchange 2007 CCR in my environment on Physical node on windows 2003 ENT edition. MY Hardware is end of life and we are planning to migrate/Converting them into virtual environmnet running Vsphere 5.1.
can any one let me know the best approach to virtualize exchange CCR .
Exchange CCR details are :-
Windows 2003 Ent edition.
Excahnge 2007.
Quorum is configuraed on shared folder.
Exchange Primary replicating Data on Exchange Secondry ..Both Primary and Secondry are having Raid 10 Local Disks.

Hi Ravi,
you can take a couple of approaches here. First off, I want to make sure you are not wanting to do a P2V conversion, that is taking the OS image that is running on the physical host and, using VMware Converter, create a virtual machine from it. You could do it that way but, depending on how much mail data is there it could take a long time and it's not the preferred approach for Exchange.
I'm going to make a couple of assumptions here:
I'm assuming upgrading to Exchange 2010 is out of the question (if it is not just do that and move mailboxes )
I'm assuming that there is plenty of storage in the vSphere environment to satisfy the requirements of Exchange. Obviously you would have to provide enough storage for all mail data x 2 if you want to continue with CCR.
Your message says "local disks", so I'm guessing the RAID 10 you mention is not available for use for these virtual machines and that you will provide some type of shared storage.
So, if you have enough compute within a vSphere cluster and enough storage (capacity and IO) to satisfy CCR I see two options:
Leapfrog approach
1. Shutdown passive
2. Evict passive from CCR cluster
3. Create new VM, Clustering services, Exchange/add as passive to the cluster (you could run setup in recovery mode /m:recoverserver, but I don't see why you would want to in a cluster)
4. Seed databases
5. Failover
6. Repeat for other physical
New Cluster
1. Create two new VMs
2. Create new CCR Cluster
3. Install Exchange active/passive
4. Move mailboxes
5. Decomm physicals
Obviously these are very high level but the approaches are straight forward. If this is your only set of Exchange servers in the environment you will have to account for any public folders/system folders, etc. Take some time and check out compute usage in the current environment so you are sure you have plenty of compute in the vSphere environment, especially if you are moving into a shared environment.
-alex

RAC Installation On Windows 2003

Welcome All
i have tow Windows2003 servers and two storage , My Company ask me to Install RAC on and I want to install RAC ON windows Platform is there any one help me to do that .
or any one try to install RAC on Windows
thanks
Edited by: user7835137 on Oct 1, 2009 8:29 PM

is there any one help me to do that .Yes, fortunately Oracle provides documentation. Since your database has no version, randomly version 11gR1 is chosen.
http://download.oracle.com/docs/cd/B28359_01/install.111/b28251/toc.htm
Werner

Oracle 9i installation on Windows 2003 Cluster

Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

Hello,
Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
Id: [email protected]
Thanks,
Regards,
venkat reddy.

Hello Venkat,
You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
Basically after the installation,
1. try to stop and start the SAP System
2. you need to check if you can access the SAP System.
3. Apply the permanent SAP license
4. Perform the configuration via IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
Hope this could help you.
Regards,
AZLY

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtik

Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Best practices for periodic reboot of MS Windows 2003 Server

Hi there,
We are a 4-month old v9.3.1 Essbase environment running on a 8-CPU MS Windows 2003 Enterprise Edition server and we run data loads twice daily as well as full outline restructures overnight. Data loads are executed both via SQL retrieves (ie, from a view set up on another server) and via data file loads after clearing the outline and rebuilding it.
Over time, I have noticed that the performance of the server was degrading markedly and that calculation scripts are taking longer. Funnily enough, the server's performance goes back to what I would expect it to be after a full reboot.
My questions are as follows:
1. Is it typically best practice to reboot MS Windows 2003 servers when dealing with a heavily accessed environment?
2. If yes, is it mentioned anywhere in the Essbase manuals that MS Windows servers ought to be rebooted on a periodic basis in order to perform at their optimal best?
3. Does Microsoft recommend such a practice of rebooting their servers on a periodic basis? I looked throughout their KnowledgeBase but couldn't find any mention of this fact in spite of the fact that it is obvious that a periodic reboot boosts the performance of MS Windows servers.
Thanks in advance for your responses/recommendations
J

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services over to the new infrastructure . We are planning on rolling out
2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
Raghav

We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

Dear All,
I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
Log File:
=====================
e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
================================
Processing Step 3 of 5
Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
**** truncated *************
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
ApplyAppsTechStack_03021625.log
=========================
Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
Version:
ApplyAppsTechStack.java : 120.23
Executing home registration for s_weboh_oh...
Registering using Registration Driver
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
setting permissions: 700
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
running OUI CLI home cloning:
e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
setting permissions: 700
e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
ouicli.pl INSTE8_APPLY -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
Pl. help me.
Thanks and regards,
Adm.

AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm

Migrating windows 2003 standard edition to windows 2008 enterprise edition

Hi
We are using ECC 5.0 and our PRD system is running on windows 2003 standard edition,and recently we have got some physical memory problem.as windows 2003 standard edition supports only 4 GB of RAM. and we want to extend our RAM for that we are planning to upgrade os to windows 2008 enterprise edition,is that possible.and after upgrading OS what are the activities that need to be performed for SAP to run succesfully,kindly suggest.
Regards
Pranav

Hi Markus
I read note SAP Note 690432 - Windows 2003 Support in it regarding upgradation of os windows 2003 standard edition to windows 2003 enterprise edition.
Upgrade of Your Operating System
If you upgrade an existing SAP system to Windows Server 2003 perform the
following actions:
o Install the latest R3DLLINS
You find the latest dynamic link libraries R3DLLINS for Windows
Server 2003 on the EXT-Kernel CD in the NTPATCH directory.
o Replace the R/3 kernel with the EXT-Kernel.
If you do not replace it you will get error "SICK" after the first
logon attempt after the start.
In this case, download the disp+work package(s) from the SAP
Service Marketplace at service.sap.com/patches and unpack the
patch(es) to directory usr\sap\exe:
dw*_<patch-level>
Use at least patch level 186.
o Use the latest saposcol version.
This version supports the changed performance counter of Windows
Server 2003 to determine values for ST06 and RZ20.
You can find the latest version in file saposcol_<Patch Level>.CAR.
in the SAP Service Marketplace.
o SAP DB only: See SAP Note 315237.o Compatibility of the Hardware with Windows Server 2003
You can perform the upgrade to Windows Server 2003 only if the
hardware has been explicitly released for this purpose. To check,
do one of the following:
- If the Windows Server 2003 CD is available, check compatibility
with WINNT32.EXE in the \I386 directory. The exact statement
is: <DRIVE:>\I386\WINNT32 /CHECKUPGRADEONLY. The result is
stored as text file WINNT32.LOC in the present Windows
directory (e.g. C:\WINNT).
- The hardware has successfully passed SAP hardware certification
(http://www.addon.de).
- The hardware is contained in the Microsoft Hardware
Compatibility List (http://www.microsoft.com/hcl).
- The hardware has been released for Windows Server 2003 by the
manufacturer. This information is published on the
corresponding website.
o Kerberos Single Sign-On
When the SAP system is installed on Windows Server 2003 you can
setup the Kerberos Single Sign-On. If you use the kerberos protocol
the information exchanged between the SAP frontend and the
application server for authentication is encrypted.
The procedure for setting up Single Sign-On is described in all
recent installation guides which you can download from the SAP
Service Marketplace at: service.sap.com/instguides.
o SAP domain under Windows Server 2003
Follow the instructions of the Windows documentation for the
migration of a Windows NT 4 domain to Windows 2003. For the SAP
environment some additional points need to be observed.
For Windows NT 4 there are two models for the SAP system domain:
- Single domain
All users and the SAP system build one single domain. This
domain can be migrated to Windows Server 2003 and exist there
as single domain.
- Additional domain
There is one domain for the users and a second domain for the
SAP system(s). For a migration to Windows Server 2003 the SAP
system domain has to be created as child domain under the user
domain. A "Top-down" procedure is to be used. The higher domain
(the user domain) must be migrated prior to the SAP child
domain. If the user and SAP domain is part of a larger domain
structure the complete domain structure for Windows Server 2003
needs to be planned in a preparing phase. Usually, the
structure created under Windows NT 4 has to be re-arranged and
consolidated.
The name space of the root domain and all sub-ordinated domains
has to be defined and the distribution of the DNS services
needs to be determined.
Note the following:
The SAP domain has to be created as child domain.
The SAP domain must not be converted into an organizational
unit (OU). OUs are not supported by R3SETUP and R3up.
in it nowhere it is mentioned about system copy so plz suggest.

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Using Windows 2003 enterprise edition?

Hi,
I am about to install a SAP j2ee instance in windows 2003.
I was under the impression that only Windows 2003 enterprise edition was supported/recommended for SAP productive instances. Enterprise version is costly compared to standard version.
Now, it looks like standard edition is acceptable itf you can handle memory limits (4GB for 32-bit and 32GB for 64-bit).
Can someone confirm my assumption?
thanks.

Hi Eric. From instguide you can use this servers for 64 bit (example for Central System) :
Windows Server 2003 :
Windows Server 2003 Standard Edition
Windows Server 2003 Enterprise Edition
Windows Server 2003 Datacenter Edition
For any version of Windows Server, you need the
latest supported service pack.
A suitable Windows Resource Kit is strongly
recommended.
You can't use 32 bit for Production system, in any case for release NW SR3 -->
you can't even install on 32 bit platform.
P.S. for HA for example you can't use Standart Edition ...
P.P.S for example read this
Re: SAP's compatibility with Windows Server 2003
latest answer are from SAP member.
Regards.
Edited by: Sergo Beradze on Nov 12, 2008 10:54 PM

Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition

Similar Messages

Maybe you are looking for