Steps for SXMB_MONI error message monitoring in CEN

Hi All,
I am not able to see the Exchange Infrastructure Monitor Template in RZ20! I have seen the same in PI7 and CEN (Solution Manager) system as well. The Central System monitoring for PI system is configured and working fine!
Please help as I want to monitor the SXMB_MONI messages on The CEN System!
Thanks in Advance!
Antarpreet

Hi Nallam,
The structure is simple like 300 nodes for items after mapping and these are to be inserted in to SAP tables using RFC. But in the Adapter engine enteries found were 250.
The same message when sent again worked fine but we have to find the root cause of the error.
Thanks
Ajay

Similar Messages

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred". What other options do I have?

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?

Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

Need a BADI for raising error messages for equi update (IE02)

Hi,
we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
No BADI's are supporting for raising error messages.
SAP doesnt support processing of userexits through BAPI's (refer note 564467).
we actually need to implement these checks and should available for all the below processes:
Through IE02
while doing through BAPI's
While Executing MASS CHANGE functionality (IE05)
Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
thanks.

Hi,
Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
Thanks

Mac: couldn't complete update for Ps error message 49 in Creative Cloud

Mac: couldn't complete update for Ps error message 49 in Creative Cloud. Anyone help?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How to select a locale for parser error messages

Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated.
I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing error messages to appear in the selected locale...
Any help appreciated.
- Michael

Yes, but doing this you changed the locale for the JVM! I know that. My intention was to see whether the parsers even had error messages in languages other than English. If they didn't then there would be no point in proceeding. But they do, so maybe there is some point.
However you don't get to specify the locale for exceptions thrown by other Java classes, so I wouldn't be surprised to find you don't get to specify the locale for exceptions thrown by XML parsers. I'm not saying there is no way to do that, only that I would not be surprised if there were no way.

Why do I always have "Insufficent Content for Edit" error message ?

Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
Thanks

Tom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks

No Matching Connection for ICMP Error Message

I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?

I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?

Payload different in SXMB_MONI and Message Monitoring

Hi All,
I am facing a problem. My message Payload in SXMB_MONI (after mapping) is different from what i got from Message Monitoring tab of RWB. In the message monitoring some entries are missing from my actual payload.
Payload from SXMB_MONI contains 300 entries
payload from Message monitoring contains 250 entries.
I am not using any module processor. Any pointer on "Why message payload got changed in RWB. ??
Thanks
Ajay

Hi Nallam,
The structure is simple like 300 nodes for items after mapping and these are to be inserted in to SAP tables using RFC. But in the Adapter engine enteries found were 250.
The same message when sent again worked fine but we have to find the root cause of the error.
Thanks
Ajay

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

Error message on updates for CS6, error message on updates for CS6

I've been having major issues with CS6 as well as CC - started with both versions of photoshop locking up, then totally refusing to open. Uninstalled both versions, just reinstalled CS6 but it is not opening unless I hit the shift key while initiating, then it refused to open a raw file so I went in to update to accomodate my camera and got these error messages. I have been without a working photoshop program for what seems like a very long time and this is beyond acceptable. Tech support was not helpful.
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop 13.1.2 for Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.4(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe CSXS InfrastructureCS6
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

Hello Mitch4815,
Thank you for reaching out for assistance with the New Feeds on your new Droid Bionic. I too own this device and I hope that you are as happy with yours as I am with mine. I've subscribed to the Reuter's Technology News on my Bionic so I can stay in the know on the latest and greatest rumors in the wireless world. Not only is it my job but I enjoy reading the speculation on the latest and upcoming devices. Needless to say I've had an experience that's similar to yours.
When I received a subscription error, I had to do a factory data reset on my new Droid Bionic in order to successfully subscribe to the News Feeds. Although I do recommend that you try this, let's save this step as a last resort. Please try to remove the battery while the device is powered on & re-insert then power the device on. Afterwards, verify that you have a good 3G/4G signal, anything more than 2 bars. If you are still experiencing access issues then the factory data reset would be the next step. Here is a link on how to perform a factory data reset on a Droid Bionic.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=46649
Of course you will have to reactivate your device after the factory reset. Prior to completing the reset I recommend verifying that your contacts are backed up on either backup assistant or on your Gmail account. Also, your pictures, videos, and music will be saved on the memory card so this info is not in danger. After you have completed the steps above, please reply to this message as your experience may help others.
Thank you for being the best part of Verizon Wireless.

Start charging for components error message

Hello All,
I am trying to implement Subcontracting with Chargeable Components by following the release notes in ECC6.0. In the last step you execute /SAPNEA/JSCR21 to start charging for the components but I receive the following error message: No data found for the specified key / Message no. /SAPNEA/J_SC005.
Any suggestions or thoughts on where the system might be hung up?
Thanks in advance for any help!

Hi Chris,
There is a good SAP Note <a href="https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=453076&nlang=EN&smpsrv=https%3a%2f%2fwebsmp103%2esap-ag%2ede">453076</a> which might help you in resolving the issue.
below are the details of the note.
Summary
Symptom
The menu '/SAPNEA/J_SC00' is not translated to Japanese.
Other terms
Best Practice Library, Subcontrating Management, Area menu,
/SAPNEA/J_SC00
Reason and Prerequisites
It is not translated from English to Japanese.
Solution
You can translate the area menu as follows.
1. T-cd: SE63 Translation -> Short Texts -> Structures -> Hierarchy
   node texts.
2. Structure ID: /SAPNEA/J_SC00
   Source language EN
   Target language JA
   Select Edit.
3. Input Japanese texts and save it. Please refer to Japanese version
   of this note.
Thanks
Murtuza

SAVE_TEXT for long error Message not working.

Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline   = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT   = 'DOKU'.
Header-TDNAME     = 'ZFQM093'.
Header-TDID       = 'NA'.
Header-TDSPRAS    = 'EN'.
Header-TDFORM     = 'S_DOCU_SHOW'.
Header-TDSTYLE    = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
     CLIENT                = SY-MANDT
      header                = header
     INSERT                = 'X'
tables
      lines                 = t_lines
   EXCEPTIONS
     ID                    = 1
     LANGUAGE              = 2
     NAME                  = 3
     OBJECT                = 4
     OTHERS                = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
   OBJECT                = 'DOKU'
   NAME                  = 'ZFQM093'
   ID                    = 'NA'
   LANGUAGE              = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C'    'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT       = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
Akash

Hi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
                   and we have to manually save it, but i want to save the text automaticaly
                   all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash

PSE 8 for Mac - Error Message

I just installed PSE8 for Mac running OSX 10.5.8. When I click on PSE I get an error message "There was an error opening this document. The file is damaged and could not be repaired". I'm not trying to open any documents, just the program. When I create a new file I continue to get the message. I can open pictures and edit them, but this message keeps on appearing every time I want to create a new document. Any suggestions?

Did you install from an administrative account? Did you disable any antivirus software (if you use it) before installing?

Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled

I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse. Please help...this is crippling the computer!

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Help diagnose Crystal Reports for Enterprise error message

When I attempt to open a specific report from our server using CRE, I receive the error message: "Unable to Open Report", "A problem occurred while opening the report from the server." "Please contact your server administrator."
The report runs fine as part of a publication. I have been able to make copies of the report on the server, but CRE will not open the copies either.
Can anyone please point this newish BOE/CRE user in the right direction for finding a solution to this problem? Where can I look for further information about what the error really means.
THANKS!
Carl Lance

Hi Abhilash,
I am able to open and edit other reports on the server without problem. I believe that they are the same version and pack. Here are my versions:
CR for Enterprise Version 14.1.3.1257, Build 2013 Support Pack 3.
SAP BusinessObjects BI Platform 4.1 Support Pack 3, Version 14.1.3.1257
When CRE displays an error like this, is there further information in a log or recorded anywhere else? How does one go about finding details?

Steps for SXMB_MONI error message monitoring in CEN

Similar Messages

Maybe you are looking for