Steps for transferring website to client

Hi there,
I am in a  similar situation as a recent poster. I have designed a Muse website for a client. They are going to subscribe to Muse CC single App (Muse) and take over the maintenance of the site. The site will be hosted by their current hoster and has not been uploaded yet.
Can you tell me the steps for handing over files to them? Is it as simple as sending them the .muse file and then they upload this to their host FTP themselves? Is the .muse file all inconclusive, i.e. images etc.?
Thank you very much. Kim

Hello Kimberly,
You can simply send the .muse file and the assets (images etc.) that you've used in the site and that should be good enough. I'll suggest you have the assets placed in a single folder. So, if on opening the file in Muse, they get a warning that asks them to relink the assets, they can simply relink any one asset (by right clicking on the asset in the assets panel and relinking it), and the other assets would be automatically relinked. This would only happen automatically if the assets are in the same folder.
Hope this helps.
Cheers
Parikshit

Similar Messages

  • TS1314 can you write the steps for transferring photos from my pc to ipad2

    Can you please write down the steps for transferring photos from my PC to IPAD2?

    Sync photos to iPad
    http://support.apple.com/kb/HT4236

  • Integration steps for Transfering Marketing plan CRM - ECC

    Hi Experts ,
    Could any one give step by step integration process to transfer  Marketing plan from CRM to R3 once its status is changed to released
    Thanks & Regards,
    SAP CRM

    Hi SAP CRM,
    you need to follow teh steps mentioned to transfer camapign from CRM to R/3
    1. In Spro>Customer Relationship Management>Marketing>Marketing Planning and Campaign Management>System Landscape
    Define RFC Connections
    Define Target Systems (ERP, BI, SEM, CPRO)
    Define ERP Integration Type-if it is online,carry out step a,if it is middleware carry out step b
    a.Assign ERP Project Profile to RFC Destination
    b.Assign ERP Project Scenario to RFC Destination
    Define Formatting Mask for Marketing Projects(this should be same as in ECC only then successful transfer is possible)
    after this is done,to transfer the plan
    1. If you use Online ERP integration type,after you release your plan,
    select transfer to ERP from the menu(you will be taken to a new screen,)put the ERP destination there,select the row and press the button transfer to ERP,you plan will get transferred to ECC
    2.  If you use Middleware integration type,the moment you can the status of marketing plan to Released,the plan gets transferred to  ECC
    You can check it in ECC by using tcode  CJ20n
    Regards
    Itty

  • Steps for transferring data to extra tab fields

    Hi,
          I have to populate target days from range of coverage to extra tab field. What are the steps I need to follow?
    First I need to use the FM EXIT_SAPLCMAT_001 to get the value on R/3 side and send to APO
    I think I need to create a file and give a name for that in APO product master Extra tab.
                   I know how to do the first part then I don't have any idea on how to proceed after that.
    I would appreciate any help.
    Thanks.

    I found the procedure myself.
    Here it is:
    1. Create a project in CMOD for the user exit FM “EXIT_SAPLCMAT_001”
    2. Enter your coding to populate the field one of the fields AT01 to 05 in the table CT_CIF_MATLOC-AT10X ( X being on of 1 to 5)
    3. In APO, maintain the field names in SPRO>APO>Master data>Maintain Freely definable attributes for the field AT10X as “Your required text here”. 
    When the material is CIFed from R/3 to APO, it is filled in the field “Your required text here”.

  • What are steps for transferring photos

    How do I transfer photos and videos from my iPhone to my PC.  I am connecting the two directly using USB connector on PC. 

    iOS: Importing personal photos and videos from iOS devices to your computer

  • Steps for capitalising the AUC to Asset

    Hi Guru's,
    The user has already made the settlement of the internal order created for AUC (CWIP - Asset under construction). Still the amount is able to see in the AUC.
    So what would be the reason for the amount lying in the AUC? and
    what are the detail steps for transferring the AUC to Assets? (like internal order then its settlement and finally transferring to the Asset)

    Hi Govind
    1. create asset master data
    2. create Internal Order
    3. Enter Budget for IO
    4. Create Purchase Order
    5. Account for GR
    6. Post Invoice
    7.Settlement of capex orders to AUC
    8. Settlement of AUC to Final Asset
    In your case you have completed steps till 7 . For finanl settlement, create final asset master and in the settlement rule specify this asset as settlement receiver for Finanl settlement. Now you might have created settlement rule only for AUC
    Asha

  • Creation of user steps for an custyomizing client ex: 100 in SAP R3 4.7 EE

    Hi All,
    What are the steps involved for creation of new client EX: 100 as a customizing client and what is the procedure to create an user in client 100, becaz am able to create a client but user is not created proeprly
    PLZ help me
    ADV THANX
    Regds
    phanikumar

    Hi Subash,
    Finally am able to create client and user also successfully.
    by again doing the client copy with change of  selected profile SAP_CUST----.
    Customizing.
    Regds
    phanikumar

  • I am going to place a 30 minutes dvd film on a website for one of my clients. Before converting tje old vhs-film to dvd I must know what format will suit the needs best. HTTP, Flash, Quicktime or something else?

    I am going to place a 30 minutes dvd film on a website for one of my clients. The film was shot 15 years ago and is in vhs-format. Before I will have the film converted into a dvd-format I want to know what format will suit my needs best. HTTP, Flash, Quicktime or something else? I will make it easy for myself placering the dvd film on the site and for the vistors who wish to look att the film.

    The DVD format (MPEG-2) isn't appropriate for Web use.
    Use QuickTime and H.264 video codec with AAC audio. Size the file at 320X240 (best fit for your old file).

  • Hello Sir. This Is Nilesh B.Desai From India. Our Clients Need is Picture Should Not Be Download So How Can We Disable Keyboard Shortcut For That Website Only.

    Hello...
    We are In the Business Of developing Website and Software.. We Are facing A problem Regarding Download. Our Clients need is not to download or print a single picture from website. so need help how can i disable download or print by using keyboard or with use of mouse.. so need to block all keyboard shortcut for such website only.. so if it is possible then please help us. we will great thankful to you..
    thanking You.
    Nilesh Desai
    Marketing Executive
    WiseCom Technologies Pvt.Ltd.
    Amadpore , Navsari, India

    No, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
    Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay.

  • Connection steps for SAP BW and R/3

    Hi Every Body,
    Can you please explain me detail about the connectivity between R/3 and BW.
    General steps which am aware is as follws;-
    SAP R/3 steps to be performed
    1.     Define Logical system---->(e.g ABC100)
    2.     Assign client to logical system -->(100)
    3.     Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
    SAP BW Steps:-
    4.     Define Logical system---->(e.g ABC100)
    5.     Assign client to logical system -->(100)
    6.     Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
    Then in BW Environment in RSA1->Source Systems->right click and choose Create
    There are two options available for R/3 system one is Manual and one is Automatic.
    For Manual  creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
    Is there any other steps am missing.What about the inbound and outbound Idoc Parameters.
    I feel this will help while transferring data to BW.am I right.
    Please clearly explain the steps for R/3 and BW connectivity.
    Regards,
    VJ

    Hi,
    <i>For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.</i>
    RFC Destination should be R/3 system. NOT BW system.
    <i>should i make connection with only R/3 200(Data Client) to BW</i>
    Yes you have to connect to 200 only. Not to 100.Other wise you will not get data from R/3 to BW.
    <i>What is the Use of Transport Button in RSA6.Post Processing data sources.</i>
    It will be used to create Trasnport requests on DS .
    <i>Suppose if i activate data source from Customizing client(100)and click on Transport button in RSA6 if there is connection with this client to BW. What is the Impact.</i>
    It will not give any impact on BW. Actually it ask you to create a Transport requset by Prompting the message box. After click on create button and entering the description, it will create a transport request.
    <i>Clearly explain me in detail what happen when i choose Transport Button in RSA6 for BC data sources.</i>
    It is must and should process. Because you will not activate(using of RSA5) the DS in quality R/3 system. So to use this DS in QA system, you will import the Transport request creatd in DEV r/3.
    In your case, you will use client 100 for activating the DS and creating Transport reuests. And then these DS are automatically available in client 200, because DS are Client independent.
    With rgds,
    Anil Kumar Sharma .P

  • Need an IDOC EDI STEPS for material document(MB03)

    HI ALL,
    i need an IDOC for material document. For example, user in SAP make material document (t-code MIGO or MB11), then automatical is downloading outbound IDOC, which contain information about material document.HOW TO PROCESS IT THROUGH EDI .GIVE THE STEPS.

    like below you can do your settings
    The EDI Configuration required to be done for Transfering IDoc to non SAP System is.
    1. First of all, we need to identify the Transaction Data which is required to be Transfered to external System.(Ex: Sales Order Data or Shipment Data or Delivery Related Data).
    2. Secondly, Identify the IDoc Type & Message Type. IDoc Type can be found in Transaction WE30 & Message Type Can be explored in Transaction WE81.
    3. After that, assign the IDoc Type to Message Type in WE82.
    4. Identify the Selection Program (Outbound) which is generally a Function Module in the Form of IDOC_OUTPUT_<Message Type>. Example, if the Message Type is ORDERS, the FM will be IDOC_OUTPUT_ORDERS.
    5. Assign the Function Module to a Process Code in WE41 (Process Code for Outbound).
    6. Configure Port Definitions in WE21 for which the RFC destinations are to be maintained in Transaction SM59.
    7. Maintain Partner Profiles for the Outbound Message Processing in WE20.
    8. Last, but not the Least, we need to Focus Mainly on Message Control Configuration which is nothing but maintaining the Output Type for the Outbound IDoc to be Triggered for the Sales Order Application or Delivery Application.
    i. In Message Control Configuration, we'll maintain
    a. Condition Tables
    b. Access Sequences
    c. Output Types
    ii. To Create the above elements, we can go to SPRO Transaction and do the same depending on the Application Area such as Sales / Shipping / Logistics Execution etc.
    iii. For Output Types & Access Sequences, we can go to the Transaction NACE or VK01 in which we'll maintain the Output Types / Access Sequences & Condition Records.
    Please note that all the above steps may not be needed if we are using some of the Standard Elements provided by SAP such as Message Type, Process Code, IDoc Type & Selection Program as many of the Standard SAP Applications have their own Elements for different Application Areas.
    For example, if you want to send an Order Confirmation IDoc when the Sales Order is saved, you can use the Message Type ORDRSP, IDoc Type ORDERS05 & Selection Program as IDOC_OUTPUT_ORDRSP.
    However, Message Control Configuration is the Key Factor and is required for all the Applications as per the Customer's / Client's Requirements.

  • What are the Major Step for Completely Avoiding the Server Problem?

    Like Ora-01033,Ora-12514.

    leen wrote:
    Ora-12514 : is listener error you need to make sure is running up and no error in listener.log
    any database error can be avoided by monitor your database everyday .
    It's possible to check daily that listener is running properly. Please, Don't mind can you provide the steps.The steps for what? Checking your listener? Just try to make a connection that uses it. For example.
    sqlplus scott/tiger@orclBut believe me, once your listener and clients are configured, the listener will 'just run' and NOT be a problem. I've been an Oracle DBA since 1995 and I've only seen ONE listener failure. And that was only when a friend at another company called to ask about a problem HE was having.

  • Steps for creation of DSO in BI7.....

    Hi,
    Can anyone help me out with the steps for creation of DSO in BI7.....
    Points will be assigned...
    Cheers
    Shankar

    Hi Shankar,
    Procedure of creation of DSO in BI7 :
    1.Select the InfoArea to which the new DSO object is to be assigned, or create a new InfoArea. Choose Modeling--> InfoProvider --> Create InfoArea.
    2.Choose Create DSO Object in the context menu for the InfoArea.
    3.Specify a name and a description for the DSO object, and choose Create.
    If you want to create a copy of an existing DSO object, specify the DSO object that you want to use as a template.
    You get to the DSO object maintenance screen.
    4. Transferring InfoObjects:
    On the left side of the screen, there are various templates to choose from, which allow you to get a better overview in relation to a particular task. For performance reasons, the default setting here is an empty template. Using the pushbuttons, select an InfoSource (only the InfoObjects for the communication structure of the InfoSource are displayed), an InfoCube, an DSO object, or an InfoObject catalog.
    On the right side of the screen you define the DSO object. Using the Drag&Drop function, assign the InfoObjects in the key fields and in the data fields. It is possible to select several InfoObjects at once. The system assigns navigation attributes automatically. These navigation attributes can be switched on for reporting in BEx.
    Thanks
    Reshu

  • Post upgrade step for EP

    HI Friends,
    I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
    Thanks,
    Regards,
    Sachin

    HI ,
    System restart
    run the SICK verify the installation check
    Check developer traces on the operating system. Log on to
    Check the installed license and profile configuration (RZ10 and PFCG)
    confirm the  operation modes
    Perform a client copy
    Check the status of the SAP Web AS Java and the user SAPJSF
    Check the rdisp/j2ee_start profile parameter
    Check the current state of SAP Web AS Java using transaction SMICM
    SAP Load Generator
    Start SAP Load Generator (SGEN)
    Regards,

  • InDesign for wireframing websites?

    Do any of you use InDesign for wireframing websites?  I need to create a wireframe for a site.  I was all prepared to do it in Fireworks.  Fireworks has some fantastic features, but I need better PDFs than what it can export.  (I tried every setting I could think of but PDFs created from my wireframes always looked fuzzy -- I guess Fireworks can't export vector into a PDF.)  So next up:  I was considering Illustrator.  Then, I saw something on InDesign Secrets about how some folks use InDesign for wireframing.  And I do know InDesign better than Illustrator.  So wondering if I should try it that way.  Do any of you use InDesign for that purpose?  If not, got any recommendations for software for wireframing (something that will give me better PDFs than Fireworks)?
    Thanks, Phyllis

    Hey Phyllis!
    So recently I've created a REALLY basic wireframe using InDesign. I basically created the visual direction so my client could easily understand how the Web site would flow. In other words, boxes with page names and lines connecting them. It can be really simple if all you're trying to do is show the site's direction.
    From there, we will create the in-depth visual layout for the splash page, home page and a global page (This is where I utilize Photoshop/Fireworks/Illustrator or Flash). This is where we will dive into color schemes, and layout schematics. In our case, this a site where we have no logo established, but have the overall concept in place, so that's why we haven't decided on an overall theme just yet. Still working out the kinks!!
    Hope this helps!
    Jazz

Maybe you are looking for