Steps for transporting info source from BWD- BWQ- BWP

Hi all,
any body tell the steps for transporting Infosource from BWD to BWQ to BWP.
Thanks in Advance
Satya

HI Satya,
Go to transport connection select the infosources under it...select objects there select ur infoaource u want to transport-there is an option tpo change the paskage if u want...assign a new request..once the new request is aassigned...then go to SE10 and then release the request. Now its ready for transport.Normally after releasing the request the Basis guys transport the request.
Regards,
Marc.
Message was edited by: Marc

Similar Messages

For transport different quatation from differnt agent in SAP

Is it possible in standard SAP,For transport different quatation from differnt agent ? If it possible,how?

Hello,
is this question related to the PC-UI? Can you describe more details of the process you need.
Regards
Gregor

Steps for creating new source system

Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regards

Hi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure

Steps for transporting the created request

hi,
sap gurus,
kindly explain the configuration steps for
how we will transport a created request
from one server to another
regards,
balaji.t
09990019711.

Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport Request is released through SE10, to be transported to Quality & production server.
Configuration of Transport Request System is configured by Basis consultant. Basis Consultant is also responsible for transporting the Transport request from Development server to Quality & Production.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka
Reward Points if Helpful.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Configuration steps for Resource Related Billing from both SD and CS perspe

I need to configure RRB for my customer. I require config steps and transaction steps for the same. Your mail on [email protected] will be highly appreciated.
Thanks in advance
Regards,
Bobby

hi refer the link below
http://help.sap.com/saphelp_46c/helpdata/en/59/54fc37004d0a1ee10000009b38f8cf/content.htm

Need steps for transporting a query

Hi friends,
Pls provide me the steps & help me understand.
I have to add a new field "doc_item" to the existing query ''zzmmr_q001'.
Please provide me the steps involved in transport. Also any checkpoints?
Please note that this field 'doc_item' is already existing in the base ODS on which this query is built on.
Regards,
R.Ravi

Hi
Please refer this thread which throws some light on modifications and their corresponding transports.
Query Transportation
Assign points if helpd
Also,
It's enough to go to transport connection in RSA1 of your development system and collect again in a new CR all the objects you need to import in your PRD environment!
for ex.. If you change only a restricted KF, you don't need to transport others than the query and its components from RSA1...
After you collected query objects in Transport Connection, are you able to see your changed objects on the right side of the screen
Collect the changed query in new request in transport connection. Check the consistency of the request before releasing in SE01.
go thru this same post..
Transporting SAP Query Changes??
Thanks

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Issue with links on WAD Template when transporting from BWD to BWP

Hello experts,
We're facing a problem in our project.
Until now we we're working directly in a productive system, but last week we've copied our productive system (BWP) to the development system (BWD).
Now we change almost everything in BWD and then transport to BWP.
However, our templates that have been constructed in the Web Application Designer (WAD) have some links that have dependency on the string 'bwd', example:
"http://sapbwd.tap.pt:8"
All the links with this issue are ragarding to workbooks constructed over the Excel (BEx Analyzer).
When we transport the template to BWP the link remains the same, where the link should be "http://sapbwp.tap.pt:8"
We would like to eliminate this issue, eliminating the reference to the system (BWD) or changing the link name when the template was transported to BWP.
Is there any easy way to workaround this problem?
We're counting with your knowledge and know how to help us.
Best Regards,
Rui Romba
Portugal

Hi Rui,
i don't know if understood you well, but if your requirement is to restrict users and queries execution to a specific server the solution is to create logon groups (transaction SMLG1), however this solution have impact not only in reports execution but also in the login options.
In this transaction you define for a group which instance server is allowed, in your case you could specify the server where the reports should run.
I strange the fact of your Wad reports allways open in the correct server, but it could be due to authorization definitions.
Hope it helps.
Renato Pedro

Steps for Master data upload from ECC6.0 to BI7.0

Hi experts,
I need to load material master and customer master data from ECC6.0 to BI7.0 and i could not see the steps to do so in sdn.
Can anyone please give me the steps from the beging till end usign Business content 0material_attr/text/Hier .
I Will assign deserving points to all the answers.
Thanks in advance.

Hi,
Steps:
1. Go to RSA5 in ECC6 to Install Business Content D.S.
2.If you want do any change then Go to RSA6 in ECC6
3. Replicate DS in BW .
4. Create Transformation (to connect DS to MD).
5 Create Info package ( to load from S/S to PSA ).
6. Create DTP ( to load from PSA to MD Objects ).
Please let me know if i am missing any steps.
Ali.

What're the steps for transport??

Hi All
I have the new task, we want to pass the informatión from ECC 5.0 to ECC 6.0, then I have to finish the process of transport, but I don't know What are the next steps after the status of transport is released?
Can you help me with information about this topic?
thanks very much
danny

First of all, i dont understand why you want to transport from ECC5 to ECC6.
SAP does not recommended to do transport from older version of SAP to a new version of SAP. Its because the same objects in the older version may not be similar when it comes to new version and some of the older versions may be obsolete in the new version which can bring inconsistencies especially if its customizing requests.
If its z programs, you should compare the objects in the old and new systems which you are going to transport and if there is no conflicts, you can.. But its not recommended to do the transport from old to new version.

Error while transporting data source from Dev to QA

Hi , I am transporting 0glaccext hier data source. I created the transport with the the transfer rules and the corresponding Infopackage. when I collect the transfer rules I have 4 transfer structures present in the transfer rules which are
" 0GLACCEXT_T011_HIER_BA1" BA2 , BA3 and BA4. when I am importing the data source, I am getting the following error messages
"Mapping between data source 0GLACCEXT_T011_HIER and source system QASCLNT400 is inconsistent"
and then
"Reference to transfer structure 0GLACCEXT_T011_HIER_BA1 not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 0GLACCEXT_T011_HIER_BA1 should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 0GLACCEXT_T011_HIER_BA1 is on the same transport request. Use the transport connection to create a consistent request."
Any suggestions on how I need to handle this issue.
I am able to load the data succesfully in Dev and I am not have

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Payload for an exent & Source from where Event Raised

In Oracle Applications 11.5.10 I want to subscribe to "oracle.apps.ap.event.invoice.approval" event.
I want to add a custom "Rule Function", I require to know the payload for this event.
And I want to know from where is this event raised in the base product.
Thanks
Atul

Many thanks Matt..
You are right.. The payload will be generated by the application raising the event. How do I come to know that from where is "oracle.apps.ap.event.invoice.approval" event raised. Is it raised from a form, workflow, pl/sql package, db trigger?
Secondly I agree it is of type WF_EVENT_T, but in addition to that I want to know what are the granular contents of the payload being passed to my rule function. What all data can I reference from this seeded Payload. What is the name of this payload.
Thanks
Atul

Query about the steps for Weblogic Server Upgrade from 8.1 to 10.3

Hi!
We have planned to upgrade our Weblogic Server from 8.1 to 10.3. Could anyone advise me:
1. How to upgrade the Weblogic Server from 8.1 to 10.3? Can the Weblogic Server 10.3 coexist with the Weblogic Server 8.1 in one physical server?
2. Where can the upgrade software be downloaded?
3. We have a web service currently running under Weblogic Workshop as the Weblogic Server is started via the workshop. Can this web service be run under Weblogic Server 10.3?
4. Are there any foreseeable issues/problems that will happen?
Please kindly help me. Thanks a lot.
Best Regards
May

Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
You can upgrade the domain after you install wls 10.3 using QuickStart.
When we migrated we have moved from windows to linux. We have installed, created domain, created managed servers, configured, etc. from scratch. We didn't face any 'show stopper' issues.

Process steps for Capital goods transfer from one exciseable plant to another exciseable plant

Please guide me about below mention process :
Capital goods transfer from one exciseable plant to another exciseable plant with updation of RG23C register.
Goods purchase in prev month.

Company code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same. Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code). Then in receiving company code based on the delivery document of other company code GR can be made. and IV.

Steps for transporting info source from BWD- BWQ- BWP

Similar Messages

Maybe you are looking for