Steps in Technical Content (0TCT*)

Hello,
Please let me know the steps are correct or something is missing.
1) Activate the Technical content just like business content (say activating cube 0TCT_C03: Data Manager Statistics )
2) Check the extractor in BW, t-code RSA3 (self system) to see number of records
3) Load the data using infopackage and schedule delta
4) Run the standard query on this cube
Just need some clarification on "Activating Data Transfers for BW Statistics". This can be found in menubar Tools --> BI Statistics Setting. I can understand that here you can activate and de-activate individually the processes for saving and transferring data. But if we dont do this, can't we see the data in reports. Is this mandatory?
Please advice
Regards
Pank SAP

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Similar Messages

Scheduling Technical Content Process Chains

Hello experts,
I'm trying to schedule the Technical Content Process Chain as per SAP Note 934848 - step 4.
This step says:
4. Schedule Process Chains.
Please schedule the technical content process chains (0TCT*) in transaction RSPC. "INIT" process chains need to be scheduled once and "DELTA" process chains should be scheduled periodically.
But when I open RSPC I can't find anything with (0TCT*).
Can anyone help me?
Best Regards,
Rui Romba

Hi Vikram,
We have everything installed.
Recently we had an auditory from SAP AG and they detected that we needded only to schedule the Technical Content Process Chain.
Regards,
Rui

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Aggregates on Technical Content

Hi Guru's,
I have installed the Technical Content Cube ( 0BWTC_C05) ,which is for ware house performance monitoring, Now I have to create a process chain to load data into this Infocube. As we are not using the Multiprovider,we cant have the standard queries on this cube. I have created a Query to get the data necessary . I want to create an aggregate for this infocube . How to manage this in the process chain ,and My doubt is if we create the aggr in Dev system, will this be carried to QA system and prd ?? I will be really Glad if any of you can send me the PC Chain used to load this Infocube, as I am not sure what process to include .
Thanks,
Krish

Hi Krish,
You can transport the aggregates created in Dev to QA and Prod boxes. Also most of the projects do allow the creation of aggregates in Prod/QA also so you can create the aggregates there.
The load steps for 0BWTC_C05 would be like this:
1. Load all the attribute/text associated with the cube 0BWTC_C05.
2. Aplly Hier/Attr Change.
3. Load the data for 0BWTC_C05.
Bye
Dinesh

Activating technical content in BW7.0

Hi,
We are in the process of upgrading BW 3.5 to NW 2004s. We followed OSS note 965386 to activate technical content. We assigned all the required authorization to the user and followed the following path to activate the content:-
SPRO>SAP NW>Business Intelligence>Setting for BI Content>Business Intelligence>BI Admin Cockpit>Activate technical content in SAP NW BI
When we went to SPRO we did not see the last step i.e. Activate technical content in SAP NW BI.
Any help in this regard? Also, why not we can activate the technical content from RSA1.
Regards,
Anil

Its just like installing any other BI content. Just check what are the cubes you would be needing. If you are not sure and want to have latest and greatest, you can stick with the MultiProvider(0BWTC_C10) that is delivered comprising of all the six individual technical content cubes. While installing system would prompt you whether to install the datsources, say yes and provide ur credentials. That would take of activating DS. After installing, replicate the datsources from the source system. You are all set to go.
or alternately run program RSTCC_ACTIVATE_ADMIN_COCKPIT to install all this stuff automatically instead of collecting all the objects in BI content screen.
Message was edited by:
voodi

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

Implement BI 7.0 Technical Content for BI admin Cockpit

Hi Experts
I should begin to activate, fill, and use the BI Technical Content system.
My goal is to set up and use the BI Administrative Cockpit.
I start by filling the necessary objects and running the queries.
I am new to this area.Could any one provide me step by step solution for How to activate BI Admin Cockpit technical Content in BI 7.0
How should I tranfer data and run queries.Please through light on these topics.If you have any useful materila pls forward to my mail id:[email protected] your time and help.
Thanks,
Vamsi .

Hi,
Did you see the doc below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards.

Implement BI 7.0 Technical Content

Hi Experts,
I have a requirement to implement BI 7.0 Technical Content.I have ckecked in Dev System and they activated most of the Technical Content Cubes.Do I need to activate technical content queries and How should I run reports?what can I need to track by running reports and How can I run reports.Please provide me some useful steps.Thanks for your time.
Thanks,
Visu.

Check this one.
Link is working please check it again.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
If you need some lights see the following links please.
/thread/663047 [original link is broken]
http://help.sap.com/saphelp_bw30b/helpdata/en/eb/3c8c3bc6b84239e10000000a114084/content.htm
Regards.

Technical Content(Statistics)

Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
Senoy

Senoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Technical content objects Getwa_not_assigned

hi friends thanks for pervious replay
I have assigned the points but i have one more request this regrading technical content objects. plz find the error below and try to help thank you . thnaks in advance .
infoobjects for technical content is failed with the short dumps
0TCTIOBJNM,0TCTQUERY,0TCTIFCUBE, plz find the attached file for error
messages . i am unable to access the querys in the prodution sytem .
Date Time Message
2005.06.13 02:56:04 Job started
2005.06.13 02:56:04 Step 001 started (program SBIE0001, variant
&0000000000376, user ID BWADMIN)
2005.06.13 02:56:04 DATASOURCE = 0TCTIFCUBE
2005.06.13 02:56:04
2005.06.13 02:56:04 * Current Values for Selected Profile
Parameters *
2005.06.13 02:56:04
2005.06.13 02:56:04 * abap/heap_area_nondia......... 2000000000
2005.06.13 02:56:04 * abap/heap_area_total.......... 2000000000
2005.06.13 02:56:04 * abap/heaplimit................ 40000000
2005.06.13 02:56:04 * zcsa/installed_languages...... E3
2005.06.13 02:56:04 * zcsa/system_language.......... E
2005.06.13 02:56:04 * ztta/max_memreq_MB............ 250
2005.06.13 02:56:04 * ztta/roll_area................ 2000000
2005.06.13 02:56:04 * ztta/roll_extension........... 2000000000
2005.06.13 02:56:04
2005.06.13 02:56:07 ABAP/4 processor: GETWA_NOT_ASSIGNED
2005.06.13 02:56:07 Job cancelled

HI MR.Andrzej
thnaks for ur repaly i tried to do as u said but it gives me waring saying . see below . hope u can help . thanks in advance . i dont understand what to do .
ConvExits for assigned InfoObjects inconsistent: ' ' (KS:0TCTSYSID) - ALPHA(TS:0TCTSYSID)
Message no. RSAR367
Diagnosis
The InfoObject of the communication structure has the conversion exit "'. This InfoObject was assigned a field of the transfer structure as a transfer rule. However, conversion exit ALPHA belongs to this field. Problems and errors could occur later if the conversion exits differ.
Procedure
To prevent later problems, select a field with its correctly assigned conversion exit.
When loading from an R/3 system, you can ignore this message if the transfer structure field has a conversion exit and the InfoObject assigned in the transfer rules has no conversion exit.

Technical Content - Query Execution

Hi,
I have recently activated the Technical Content.
How do I identify the number of the times the query has been executed by the user? I found one column 'Number of Navigations' in the BW-Statistics workbook. What is this meant for ?
Thanks
Ramesh Ganji

hi Ramesh,
oss note 130696 -Performance trace in BW-Helps may explain the meaning.
to identify number of times query executed, there is keyfigure 0TCTSTAUIK - frequency,
check if helps business content query 0BWTC_C10_Q021
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
you can utilize infoobjects OTCTQUERY, 0TCTSTAUIK (frequency), 0TCTUSERNM, 0TCTNAVCTR from multiprovider 0BWTC_C10
most user-run queries
130696 -Performance trace in BW-Helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME.

Technical content in NW04s

As I understand the technical content infocubes provided in NW04s are named 0TCT*.
And earlier in NW04 it was 0BW*.
1) Is that right?
2) If yes then is it true that if the infocube is still on NW04 in the NW04s environment then only 0BW* infocubes will be populated with stats( not 0TCT) and likewise for NW04s infocubes the stats will be populated in 0TCT cubes ( not in 0BW*)?
Thanks
Manoj

1. In general, yes.
2. After upgrade to NW04s, only the new cubes will be populated with new data. The previous RSDDSTAT table will no longer be populated with statistics information. It becomes obsolete and is replaced with the new statistics tables.

Technical Content Activation

Hi
Iam trying to activate technical content from Bus. content are and being unsuccessfull.
Steps i took
    Collected the technical content objects.
    Marked all of the objects to be installed.
    Ran install and nothing happenned.
    Then i tried to simulate the install, it is
        saying Role SAP_BWC_TCONT already exists.
Went back to Info providers sections and deleted all of the already existing series of info cubes from
0BWTC_C02.... C11. Delete the multiprovided C10 too.
assuming that this will clear up the role.
Once again tried the simulation and the same error comes up. Not sure how to to delete the role.
Please let me know how to do this.
Sampath

Hi,
By using T. Code PFCG we can create/ Edit the roles. So you can go to the T.code and choose the role and delete.
Thanks & regards,
Venkata Sharma.

Steps in Technical Content (0TCT*)

Similar Messages

Maybe you are looking for