Steps on ecc6 installation in suse linux

hi sir/madams
i am new in ecc6 installation on linux systesm please provide a sap installation steps on suse linux...and thankul to all
regads
suresh

Check the install guide as above for ECC/ERP 6.0 and also be sure to check the following SAP notes:
Note 171356 - SAP software on Linux: Essential information
Note 1275776 - Linux: Preparing SLES for SAP environments
Depending on the version you running:
Note 1310037 - SUSE LINUX Enterprise Server 11: Installation notes
Note 958253 - SUSE LINUX Enterprise Server 10: Installation notes
Nelis

Similar Messages

9i and 9ias installation on SuSE linux 7.3

Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,

For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html

Oracle9i Installation on SuSe Linux 7.3 Professional Edition

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"
But after the Linux insalltion I found that only make executable is present and other doesn't. My doubt is, if I continue with the Oracle Installtion without these files does the installer cause any problems? If so how do I get these executables, as these executables doesn't exist in the "Software Installation" listing of SuSe 7.3 Professional edition?
Another doubt is, Does SuSe 7.3 Professional edition suitable for Oracle 9i Database server? I checked the Kernal version, it seems to be OK.
Please help.
Thanks in advance
Sriram Subbiah

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"Thats compiler, linker and linktool, install "binutils"!
Sincerly,
Christine

R12 EBS Installation on Suse Linux 9.0

Dear Friends,
I am doing a dual installation of oracle 12 ebiz on suse linux 9.0 and i my installation hangs on with the following message , having checked metalink, forum notes , i have run the autoconfig and the autoconfig on the application tier
fails (i have pasted the below this )
Login Page
checking URL = http://bhmlx40.uat.itvplc.ads:8010/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : shmlx43
sDbDomain : uat.plc.ads
sDbPort : 1531
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@shmlx43.uat.plc.ads:1531:PROD
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD.uat.plc.ads)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
Can you please help me to resolve the above problem , if someone has come across this problem
Thanks in advance
Kind regards
Sri

Thanks John, hsawwan
The problem was actually , i was doing a dual node installation , i didnt have valid entry of my database server on the application server , i mean the fully qualified domain name , i have changed it and the installation went fine . I am having another problem now . I cant login to the user login page from my windows box
as it ends up with page not displayed message . Once the installation was done
I had an option of connecting to the URL directly from the installation page itself which went fine but i cant connect the same URL from my windows box , i have made valid entry under hosts file on the window box and i believe it should work
I am not sure why its not working . I am sure that Apache is up Can one of you help me with this problem
kind regards
Sri

Oracle 8i installation on SUSE Linux 7.0 and 8.0

I have not been able to install Oracle 8i (8.1.6) on SUSE linux 8.0 as well as 7.0. The Universal installer starts but stops after showing a lot of messages. Any suggestion/help?

The configuration of my machine is: Intel P3 733 MHz on Intel 815 original motherboard, 256MB RAM, 40 GB Harddisk

Unable to continue the installation in suse linux

hi,
this sudheer
my system environment as follows;
operating system:open suse11.0
Java devloper kit:jdk1.6.0 for linux
processor:amd 64
hard disk:250 gb
DBMS:maxdb 7.6
1.i have extraced the file of IBMjava2-JRE-1.4.2_12 amd64.tgz into opt folder.
   but i used default jdk 1.6.0 which is came from the open suse11.0.
2. i have decalred the environment variables as follows;
   for java
   export JAVA_HOME=/usr/lib/jvm/java-1.6.0
   export PATH=/usr/lib/jvm/java-1.6.0/bin
   for SAP Installation master
   export SAPINST_JRE_HOME=/usr/lib/jvm/java-1.6.0/jre
   export DISPLAY=water:0.0
3.i have created sapmnt folder in /
4. but during the third phase of instalation(unarchived files) solution manager
    it is unable to continue
regards
sudheer koppala

Hi Sudheer,
I am sorry but I guess you are using the wrong versions here
SAP does not support SUSE11 and also Java version should be 1.4.2.....
SAP only supports SUSE Linux Enterprise Server 10,SUSE Linux Enterprise Server 9,SUSE Linux Enterprise Server 8
Refer to SAP notes 171356 for SAP on Linux
1172419 for Java versions
These are highly useful
Let me know if you need any other info.
Rohit

Ecc 6.0 installation on suse linux 10 server

can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10

srjn_123 wrote:
can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10
Inappropriate Question.
If you have SAP OSS access, then please browse through service.sap.com/instguides --> SAP Business Suite --> ERP --> ERP 6.0
Read the Guides.
Thanks

Content server installation on susi linux 9

Hi friends
this is first time i am installing content server on linux system . and i facing too many problems as iam really not aware of linux
anway can provide me step by step details to install and configure content server on linux operating system

Hello!
I presume (taking the name of this forum) the original question was about SAP ContentServer?
This would be a rough description how to configure a SAP CS/CSC for FileSystemStorage
0) if linux is not your platform of choice (it would be mine) - take a different platform
1) read and understand SAP notes, especially 664384, 586895 and related
2) make sure you are using an enterprise linux (cf. service.sap.com/PAM)
3) your linux installation should (amongst others) contain
    a) gcc (GNU c-compiler)
    b) gdbm-devel
    c) libexpat
in general this would be described as a development (with regard to software building) system by some linux distro's
4) retrieve the apache 2.0.x (for allowed x: cf service.sap.com/PAM) source code to build your own apache
5) be root user
6) create group sapsys
7) create user csadmin, primary group: sapsys
8) you may want to create an own filesystem for content, e.g. /SAP
9) as user csadmin build apache with option (amongst others) --prefix=/home/csadmin (presuming this is csadmin's HOME)
10) if you also need the cache server (you will as soon as you have more than 1 location, repeat 6, 7 and 9 for user cscadmin
11) as root (make sure you have X), execute sapinst from the installation master
12) installation almost as under Windoze - don't use AdminSecurity as it will not work with modern UNIXes (ContentServer wrongly assumes that /etc/passwd contains the crypted passwords and there's a note proposing to put it there - security alert in my humble opinion) - better to protect transaction csadmin
13) you should be all set
I hope I didn't forget anything - this was from memory.
Contact me if you have problems.
Good luck and best regards, Markus

Oracle 9i Installation on SuSE Linux 9.0

I am trying to install Oracle 9iR2 on SuSE 9.0
All pre-Installation Setup was done like i saw on Suse web pages (create Oracle-User, oinstall-usergroup etc.)
I login as root-user on the system and open a shell session (localy) as oracle user with :: sux oracle :: command.
I started runIstaller and got the welcome windows from oracle Installer. i can click on each button but the button next is not reacting so that i could go to the next window. Can you please tell me why the installer is not properly working?

you have to unlock the numpad key on your keyboard.

MiniSAP WAS 6.10 and JAVA 1.4.1 (SUSE Linux 9.0)

Hello all!
I have some problems with the MiniSAP installation under
SUSE Linux 9.0.
I use the MiniSAP WAS 6.10, SAP DB 7.3 and the SAP Gui for the JE 6.10.
The Problem comes with the Java 1.4.1. In the documentation from the SAP CDs is the version IBMJava2-JRE-1.3-45 required.
If I try to run the SapGui i get many errors from Java (I think).
Anybody has a idea ?
Regards
René
e-mail: [email protected]

Hello René,
I think you should download the latest SAP GUI for JAVA at: ftp://ftp.sap.com/pub/sapgui/java/630r4/PlatinGUI-Linux-630r4.jar
Regards
Gregor

Installation Error ECC6.0 + Oracle 10202+ Suse Linux 10 ( 64 bit )

Hi all,
We are installing ECC 6.0 with Oracle 10202 on Suse Linux 10 ( 64 bit ) machine.
We are facing error in the Import ABAP phase.
Below is the error:
Import Monitor jobs: running 1, waiting 1, completed 35, failed 0, total 37.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 35, failed 1, total 37.
ERROR 2008-02-25 23:56:45
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-25 23:56:45
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
We stopped the installation and restarted the database, but its didnt worked.
Any ideas in resolving the error ...!
Kind Regards
Neenad

Hi all,
error lines - th_act_em_hdl
It is a problem with time zone .. current time zone is zzz & changed to AST (Arabic standard time).
Re: ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
-rahul
Edited by: Rahul on Nov 26, 2009 10:43 AM

Installation of Oracle EBusiness Suite 11i Release 10.2 on Suse Linux 9

Hi,
I have been going thru this forum and got some great tips but am still having problems installing it on Suse Linux Enterprise 9. The reason for failure is at 20% - adrun9i.sh script. Initially it was giving me error while unzipping the files, now it passes that step but gives error while configuring db. I am not sure what the problem is. I have set all the possible kernel parameters. Any help is appreciated?
Thanks in advance,

I had the same issue, though I cant remember the percentage anymore, but it was whilst on Database Disk 2.
What I found out was that the DVD in which that zipXX file was had a CRC error, and the size of the .dbf (I think it was a xxxtx.dbf file) was smaller than expected, cos I manually unzipped this file during a rerun of the installation which finally succeeded. Unfortunately, the DB srung the error after I tried forcing it to mount and open.
I have now installed the same on SLES9, after I downloaded a fresh set of files from edelivery.oracle.com ( Its a nightmare if you have a slow broadband - Lasted me about 2 weeks, using a download manager)
You can see the article written by Micheal B on coolnotes in the Novell site, and get in touch if further assistance is needed.
Good Luck if you havent given up on the idea

RapidInstall Hangs on Step 4 of 6 - 11.5.10 - Suse Linux 9

I am trying to Install the E-Business Suite 11.5.10 on Suse Linux 9, but unfortunatelly the process hangs without giving any information:
Where:
* Step 4 of 6
* Command: adrunat.sh (50%)
* Completed Unzip 1222 of 1250 (APPL_TOP Disk 2)
There is no much information on installAppl.log. I have tryed restarting the process, starting from the begining again, but everytime it stucks on the same step.
Below are the installAppl.log last lines, and the process log last lines.
What could be happening?
Thanks in advance.
Nicolas.
installAppl.log
Unzip1221 - Start of native unzipping /media/sr0/Disk8/appl/stage/java27.zip at /d01/oracle/prodcomn/java/
Unzip1221
.end std out.
.end err out.
Unzip1221 - Completed native unzipping unzip -qn /media/sr0/Disk8/appl/stage/java27.zip -d /d01/oracle/prodcomn/java/
Thread exiting ..Unzip1222 - Start of native unzipping /media/sr0/Disk8/appl/stage/util2.zip at /d01/oracle/prodcomn/util/
Unzip1222
.end std out.
.end err out.
Unzip1222 - Completed native unzipping unzip -qn /media/sr0/Disk8/appl/stage/util2.zip -d /d01/oracle/prodcomn/util/
Thread exiting ..Process Log
STARTED INSTALL PHASE : APPLTOP : Wed Aug 6 11:24:55 ART 2008
runProcess_1
Statusstring Installing APPLTOP - gappl.drv
Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 1 :
Checking Disk contents in - /tmp/RapidInstall
Checking Disk contents in - /oraApps/Disk1
Checking Disk contents in - /tmp/RapidInstall
Checking Disk contents in - /Orainst/APPL_TOP/Disk1
UnzipCount:1250
Processing Disk1....
Processing Disk2....
Processing Disk3....
Processing Disk4....
Processing Disk5....
Processing Disk6....
Checking Disk contents in - /tmp/RapidInstall
Checking Disk contents in - /oraApps/Disk7
Checking Disk contents in - /tmp/RapidInstall
Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 7 :
Checking Disk contents in - /media/sr0/Disk7
Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 8 :
Checking Disk contents in - /tmp/RapidInstall
Checking Disk contents in - /oraApps/Disk8
Checking Disk contents in - /tmp/RapidInstall
Checking Disk contents in - /media/sr0/Disk8

Did you already setup the OS per the 11i installation doc?
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
Already ran orarun to setup kernel parameters etc? Are you doing the installation as root and created the oracle (oraprod) and applmgr (applprod) OS users already, or are you doing a single user installation? I prefer having separate users as it is easier to tell when the applications processes are all down by grep'ing ps for applmgr.

Installation of SJSAS 8 freezes on Suse Linux 9.1

I am trying to install the Sun Java Application Server 8 on my Suse Linux 9.1 System. I have the Sun JDK 1.4.2_05 installed and the JAVA_HOME variable set to the right directory.
When I am starting the downloaded installation file as root, the GUI guides me through the licene agreement, the installation directory selection (/opt/SUNWappserver) and JDK selection (/usr/lib/j2sdk1.4.2_05).
After this step the installer just freezes. Nothing happens any more - the only thing I can do is aborting on the console with Ctrl+c.
The same thing happens when I try using the non-GUI installing process - at the same step. Even using another JDK - I tried 1.4.1 - leads to the same result.
Referring to the topic of eric.r.turner in this forum ("Installing J2EESDK 1.4 on Slackware 9.1 and Current Freezes"), I checked the /var/tmp/ directory and found no productregistry files.
Does anybody has an idea what I can try else?
Thanks!
Holger

Supplement:
I tried the workaround specified in Bug ID: 4978327, unziping the bin-file and starting
/usr/lib/j2sdk1.4.2_05/bin/java -cp .:package/PackageFormat.jar -Xmx256m appserv -nodisplay It did not work (though the opposite is presumed at the end of the bug description).
Holger

NetWeaver 2004s installation problem on Suse Linux

Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.

Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes

Steps on ecc6 installation in suse linux

Similar Messages

Maybe you are looking for