Steps/RisksConnecting BW with New ECC 6 while keeping old ECC5 box active

Hi Friends-
Right now we have current dataflow from ECC 5 to BW 7.0 for differnet countries .Now i have a situation where i have new ecc 6.0 box. and I need to move only one country functionality to new Ecc6 box and load data from new box to current BW box. So what are the pain ponts/Risks in doing this. My concern is all about master data, Can anyone suggest the best methodology to do this without effecting current dataflow or overwriting objects.
Regards,
Mark

Hello Mark,
Does your master data overlap and you can't easily make it unique from the individual source systems? If not you could compound with 0SOURCSYSTEM as described in the SAP note 184948.
Best Regards,
Des

Similar Messages

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

TS4268 i've backup in itunes with another phone number activation , now i want active with new phone number without losing old backups , what can i do for this problem ?? :(

i've backup in itunes with another phone number activation , now i want active with new phone number without losing old backups , what can i do for this problem ??

If I get this right, you've ported your phone number to AT&T with the purchase of the iPhone. That is considered opening your own account under your name. Your brother's account is not ported to AT&T unless you used his SS# instead of yours. Your brother still has his account under Verizon Wireless, all you did was use your cell phone number to when you opened your own AT&T account.
If you don't want to use your Verizon Wireless phone #, my suggestion is to call AT&T customer service and explain that you want a new phone number instead of the ported Verizon number.

Trying to activate a new iPad mini. Keep getting message that activation server can't be reached and to try through iTunes. I can't go back beyond the language choice screen to select iTunes. Two days of trying to activate. Help?

Trying to activate a new iPad mini. Keep getting message that activation server can't be reached and to try through iTunes. I can't go back beyond the language choice screen to select iTunes. Two days of trying to activate. Help?

Apple's download AND activation servers are being stressed today with all the downloads/activations. It might be best to wait and try later.

IM Init with new ECC and BI Production start up

Hi Everyone:
We have a new BI and new ECC going live. There will be a period of downtime in the production ECC box after conversions are done. This will be just prior to golive time. Is it ok to go ahead and do the 3 inits for IM with ECC to BI before the boxes are up and being used? We have done this before on another project without any problems but I just need some confirmation for my peace of mind on this. Thx

Hi,
In r/3 side ok when ever u rcoping from one systme to another for example if u take r/3 production to r/3 quality now the entire system will be copied as like production in r/3
now in bw quality is asconnected to r/3 quality once ur copied the logical system every thing cahnegd in quality r/3 but before copy the system is connected with different logical system.
hence it is better to chnage logical system after copying from production to quality.
now u take BW side,yes what u said is write it is tottlly coping system if u r refereshed the system automatically the production system will be copied in quality all delta process will come to quality
so once u r refreshed teh quality r/3 then it si better to once again replicate the qualty sasyte(after coping productionr/3) the do the copy of bw production to quality.
Thanks & Regards
Sathsih

Migrate MP3 library to new drive/directory while keeping all iTunes data?

I currently keep my 80 GB MP3 library on a portable E: Drive.
I've always managed my own music folder ex: "E:\MP3\Rock and Alternative\Radiohead" etc. etc.
However, I recently upgraded my system (C:) hard drive and now have room to actually keep all of my MP3s there and would like to move them over to drive C: So the path will read like this: "C:\MP3\Rock and Alternative\Radiohead" while keeping all of my star-ratings, play counts, playlists, etc...
Is there a way to do this?

*How to open a different iTunes library*
Click the icon to launch iTunes and immediately press and _hold down_ the SHIFT key. After a short while you will be prompted to *Choose or create an iTunes library*. This feature can be used to switch between different library files.
The normal layout it that the main iTunes folder goes inside whatever the Windows default music folder is called, e.g. C:\Users\Michael\Music\iTunes for you on Windows 7. Inside the iTunes folder are a bunch of library files and a folder called iTunes Music or, post iTunes 9, iTunes Media. Provided all your content is inside this media folder you can relocate the enclosing iTunes folder at will. The steps I outlined above are an attempt to reconnect your library so that it becomes portable. I realise your music is already in the E:\MP3 folder, but I don't don't know what value you have under Edit > Preferences > Advanced > iTunes Media Folder Locataion. After copying your library files to E:\ and opening the library there you need to make sure that this setting reads E:\MP3 otherwise the next step of copying back to C:\Users\Michael\Music\iTunes may not work. This is also the reason for the cycle of opening and closing iTunes - to make sure that iTunes has a had a chance to switch from using absolute references to your files to relative references (or at least ones that it will update) which it should do if your media is inside the "media folder" before you move or copy the library. Backup the existing content of C:\Users\Michael\Music\iTunes before you copy the content from E:\ so that you can undo the steps you take if it breaks your library.
BTW like you, I manually manage my music, but I don't necessarily advocate this as the best way to do it. If you're prepared to yeild control to iTunes you could just consolidate your library onto the C: drive and allow iTunes to *Keep the iTunes Media* folder organised. If you want to keep manually managing then the best layout is one in which the library is portable. That is a library folder containing a media folder. You can pretty much orgainse stuff in the media folder any way you like but it's more effort than leaving it all to the application. You should also disable any automatic file organising options in Windows Media Player and ideally change it's rip folder to the main iTunes media folder location.

Replacing material while keeping old cuts and effects

I went through the entire process of capturing, editing, and authoring video with Premiere Pro CS4 only to realize that the first half of my hour-long project was captured with the wrong aspect ratio. The aspect ratio of the footage is 16:9, whereas the capture settings were set for 4:3. The discrepancy causes flickering and other unwanted effects to the video, but I'm not compelled to redo the entire business with all the cuts and effects that I so carefully worked on. Is there a way to recapture the footage off the DV tape, this time with the correct aspect ratio, and to import it to the project so that it would replace the respective, pre-existing while keeping all the editing decisions of the old footage intact?
Thanks a million for any help!

Just make a new sequence with the right aspect ratio.
Copy old timeline into new one.

How do I create a new iTunes account while keeping my old account?

I have an iTunes account with an Email address that I can no longer access. I have forgotten my password. Apple will not allow me to change my Email address so I cannot change my existing account at this time. I have purchased a lot of music and I do not want to delete the music. I hope that someday in the far far future, Apple's policy will change and I can reclaim the music that I purchased.
Anyway, I want to create a new iTunes account without deleting my old account. Is this possible?
Thanks!

Howdy! I have tried to change my Email address with Apple. Since I cannot access my old Email address, they will not let me change my password. Since I cannot recall my old password, they will not allow me to change my Email address. I am in a true Catch 22.

IPad mini with new iOS 7.0.2 needs to be activated

Since the newest update of iOS 7, my iPad mini has all of a sudden needed to be "Reactivated". When I try to connected via "WiFi" on my home network, I get an error saying that the Activation server is down and was unable to connect.
Then, I tried connecting the iPad mini to iTunes on my computer, but my computer gets an error saying "iPad software is out of date". Although I access my iPad mini content on my computer, the iPad mini interface stays on the same screen trying to connect via WiFi.
Finally, after a hard reset, I turned on my iPad mini and it has me enter my passcode. Whenever I enter my passcode now, the iPad mini freezes on the screen and ONLY a hard reset turns off the iPad.
My iPad mini has become useless and is frustrating me. Reading through forums, I see that I am not the only one with this problem, but no solutions have been posted. It seems to me that it has to be the new software not responding well with the hardware.

These instructions are for an iPhone, but they should also apply to an iPad.
Also read "Additional Information" at the bottom of that page regarding the Activation Lock of the new iOS 7 security feature:
http://support.apple.com/kb/TS3424

With new WiFi router, iChat keeps logging me out. why??

Two days since I plugged in new Verizon WiFi router and the iChat application keeps logging me out whenever computer is in idle mode. I have to go to Preferences and change Port to 443 SSL and when that stops working, change back to 5190. Any way to set this so I don't have to manually change the setting several times a day?
Thank you!

Hi,
Can you tell me what you mean by Application Sleep ?
I have an iMac myself and tend to be using the computer for about 3 hours of an evening then I shut it down.
During that time any app I have open is in full use mode even if it is not the "front" app.
An AIM Login has been able to use an SSL Login since iChat 4.
It has been the Default option in use.
However it does have issues if there are micro breaks in the Internet service you are getting.
This means that iChat or Messages gets Logged out but the app will not log back in again Automatically.
Not using SSL has a better record of Logging back in on disconnection.
The Dropping completely under SSL can only be solved by Unticking "Use this Account" and then Selecting it again to Login afresh.
It should make no difference if the Buddy list(s) are set to Away as you are still logged in continuously in that state.
As SSL is supposed to be more secure it needs the definite manual intervention so that it is known that "you" wanted to Login.
Although micro breaks can happen when using Ethernet they are less common.
We are mainly talking about WiFi drops that effects constantly connected app like iChat and Messages that can then spot the smallest of "no internet" time that the Mac may not even register with the Menu Bar icon for Wifi and is not noticed in Apps like a Web Browser that then take a few moments longer to show a Page or the Mail app taking just a bit longer to fetch mail as these apps are in fact now the then users of the Internet connection.
I would try an check if the WiFi signal appears to vary around your house.
Use the Drop down from the WiFi icon in the Menu Bar to see the Bars for your device.
It could be interference from other close by routers.
All routers can use several Channels (minor divisions in the radio band they use).
Most come factory set on a middle number of the range that can be applied.
It may pay to use a number closer to the end of the range (top or bottom)
iStumbler can be used for closer details including the channel info for close by routers.
It's last update was for Snow Leopard which means it should work on Intels.
You may need to go to System Preferences > Security and Privacy > General tab and set the Application Download options to "Anywhere" as it is not on the App Store.
8:00 PM Friday; March 29, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Ipad Air 2 cellular/Wifi - With new sim card installed keeps on saying NO SIM

I got new ipad air 2 - installed Carrier sim card, Ipad keeps on saying no sim found "NO SIM"
On call with Apple technicians this problem was resolved by resetting the network settings, but today again its showing NO SIM
Has anyone else encountered this problem

Chiming in from the US, it seems that a lot more of us are having this issue as well lately. My iPad has worked well under 3 OSs and I have never seen that NO SIM message until this week. I am running iOS 5 since it was released, but have not yet upgraded to iOS 5.0.1, and all of a sudden, I see that NO SIM message pretty much all the time.
I have never removed my SIM or had any trouble with 3G before this week. It's not a big problem for me since I don't use it very often at all - not even on a data plan now - but it's annoying and not what I paid for. And if it happens to my wife, she'll be in trouble.
Apple folks, has there been any official acknoeldgement for this issue, and has it been properly elevated so it will be addressed? There are quite a few threads on this out there.

Can't sync iPhone with new MacPro, won't erase old stuff

I'm switching from my MacBookPro to a new MacPro. My iPhone 5s will not sync with the new computer. It gave me the warning about erasing the old stuff, but it never does. After trying about 10 times it finally asked if I trusted the computer, I said yes, but it never asked me that on the computer. It should have asked me that right off.
My library lives on the same external hard drive as it did before.
I had this problem with my old iPad mini and I had to erase the iPad every time I wanted to add videos.
The graph that shows capacity at the bottom of the iTunes window, changes back and forth between How it is now and then to the changes I make then back.
Any ideas?
thanks
Ron

I changed it to manuel sync and it worked. I thought I tried that before, but I quess not.
thanks
Ron

HT3964 I reset the smc and I'm still not able to charge my laptop I have a 1278 macbook pro with new battery and it keeps telling me plug in not charging? I'm new to mac so I really don't know what else to do..

new battery not charging. reset SMC and still nothing what do I do next?

Hector1469,
if you run System Information and select ▼ Hardware → Power on the left-hand side of the window, what information is shown in the Battery Information and AC Charger Information sections on the right-hand side of the window?

Creative Cloud Account Change from Old Work Account to New Personal Account - while keeping some details?

Hi,
I'm currently working as an in-house film and motion graphics editor - using
Pr + Au & Sg
Ae
Ps
Ai
Mu
An
All currently have personal workspaces, widgets etc and I don't won't to return to point zero.
Is there a way of beginning an Account in a personal Name while maintaining all the Apps as they are?
Many thanks?

Please provide the Order number or the Email registered to it by personal messaging so that I can assist you.
You may also contact Adobe Support at
http://adobe.ly/yxj0t6
Regards
Rajshree

Synk ipad with itunes while keeping old music

I got an Ipad from a friend with good music I want to keep but my itunes wants to sync and erase it. what can I do to add my itune music to the ipad without erasing the old music already there?

I reinstalled iTunes and that seemed to do the trick...

Steps/RisksConnecting BW with New ECC 6 while keeping old ECC5 box active

Similar Messages

Maybe you are looking for