Steps to add the pull subscription on secondary (post failover) in 2012

We are upgrading the servers to 2008 to 2012 and implementing the Always ON for the HA and replication. I am stuck on making the replication work between the primary publisher and the subscriber secondary post failover. Did any one faced and fixed
the issue and if so, please share the details steps.

Hi starter_dba,
Before you configuring replication and AlwaysOn availability groups, there are some notes which need to consider. For example, the distributor should not be a host for any of the current replicas of the availability group that the publishing
database is a member of. You need to configure the secondary replica hosts as replication publishers.
For more information about configuring replication for AlwaysOn Availability Groups, you can review the following articles,
http://technet.microsoft.com/en-us/library/hh710046.aspx
Expanding AlwaysOn Availability Groups with Replication Subscribers:
https://www.simple-talk.com/sql/backup-and-recovery/expanding-alwayson-availability-groups-with-replication-subscribers/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Similar Messages

How to add the Assignment column on this post outgoing payment in f-53

Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
Joo

Hi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat

I need to add the doc no once after posted the manual bank reconc statmt.

once after posting the manual bank recon statement in ff67 i have to see the statement with that ref.doc no, for this what i have to do in ff67. In ff67 proceeding to next while entering the amount i gave doc no but system showing only amount, there is no doc no,what i have to do?

i got the doc no detail but while i am doing ff67 i am giving the amt, doc no, value date and transaction everything but system picking according to the amount not document no. For example vendor payment Rs:5000 doc no 50 in bank statement also same, this one if i am uploading in ff67, after posting i am going and checking in fbl3n instead of clearing the doc no 50, system clearing the open which one is first in a list the amount Rs:5000 . System posting according to the amount not to the doc no, can any one tell me to rectify this one.
Edited by: MANISFICO1 on Jul 26, 2011 8:30 AM

Setup transactional replication with pull subscription using the option @allow_initialize_from_backup

I am trying to setup transactional replication with pull subscription using the option @allow_initialize_from_backup = true and I am a bit confused on steps involved because at teh end of setup it shows ‘uninitialized subscriber’ in replication
monitor.
Publisher, distributor and subscriber are three separte SQL server 2008 R2 servers.
I executed below steps -
On publisher SQL server executed sp_addpublication with options @immediate_sync ='true and @allow_initialize_from_backup = true
On publisher SQL server executed sp_addarticle to add the articles
On distribution SQL server disabled distribution cleanup agent and stopped the distribution cleanup job
On publisher SQL server created full backup of the publication db
On subscriber SQL server restored above backup with recovery
On publisher executed sp_addsubscription using options @subscription_type = N'pull', and @sync_type = N'initialize with backup'
On subscriber executed sp_addpullsubscription using options @independent_agent = N'True',@subscription_type = N'pull',@description = N'',@update_mode = N'read only',@immediate_sync = 1
On distribution SQL server enabled distribution cleanup agent and started the distribution cleanup job
At the end of these steps it shows ‘uninitialized subscriber’ in replication monitor. What am I doing wrong ?
In the above steps what is the difference between sp_addsubscription and sp_addpullsubscription ?
When I setup transactional replication with push subscription using the option @allow_initialize_from_backup = true, I only execute sp_addsubscription on publisher.
Ravi Kumar

After the step 7 did you create the "Pull Subscription Agent" by running the below stored procedure?
EXEC sp_addpullsubscription_agent
http://msdn.microsoft.com/en-us/library/ms147834.aspx - Step 6
"(Optional) For a pull subscription, execute sp_addpullsubscription (Transact-SQL) and
sp_addpullsubscription_agent (Transact-SQL) at the Subscriber on the subscription database. For more information, see
Create a Pull Subscription."
Check this article for step by step with example-
http://www.sqlpassion.at/archive/2012/08/05/initialize-a-transactional-replication-from-a-database-backup/ The only thing in this article is it uses immediate_sync to be false, where as BOL says to keep it true when allow_initilize_from_backup is true.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Pull Subscription for Room Calendar

Hi,
I am using windows service to poll the conference from Exchange Room Calendar. To my client request, we have to move for the "PULL SUBSCRIPTION". our existing work flow is completely based on Room not by the user. I tried the Pull subscription
for user it returns the events which is created in user calendar. Is it possible to authenticate user account (who is having impersonate access) and access Room Calendar's events.
If it is possible please reply with some example.
Please Advise

As long as you have rights to the Resources calendar folder you should be able to just use Delegate Access
http://msdn.microsoft.com/en-us/library/office/gg274408(v=exchg.80).aspx to do the Pull subscription eg
FolderId RoomCalendarId = new FolderId(WellKnownFolderName.Calendar,"[email protected]");
List<FolderId> fldIds = new List<FolderId>();
fldIds.Add(RoomCalendarId);
Folder Deletions = Folder.Bind(service,WellKnownFolderName.RecoverableItemsDeletions);
EventType[] evEvents = new EventType[] { EventType.Copied, EventType.Created, EventType.Deleted, EventType.Modified, EventType.Moved, EventType.NewMail };
PullSubscription pullsub = service.SubscribeToPullNotifications(fldIds, 30, null, evEvents);
GetEventsResults gEvents = pullsub.GetEvents();
foreach (ItemEvent itmEvent in gEvents.ItemEvents) {
Console.WriteLine(itmEvent.EventType);
Cheers
Glen

How to add the  symbol

Hello again-
How do I add the Apple () symbol to my posts? I just did this one by copying and pasting from another thread, but I am sure there is a better way.

Hi Miriam,
Yes I went and slept after I posted to you.
I presume the 4 key where I see the $ as Shift + 4
Mine on my Wireless Keyboard is marked as also having the Euro sign there (€) which on my Mac keyboards is Alt + 2 but I would guess is possibly somewhere else on yours.
Also Hi skalicki`
(That trailing tick sort of symbol also has me fooled I had to Copy and Paste)
Can I thanks you for the Points.
P.S. I think I have found it.
The Mac Keyboard and the one I am using seem to also interchange the keys left of Z and to the left of 1 of the Qwerty part. (not number pad)
7:39 PM Friday; May 22, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

Try:
iTunes: Finding lost media and downloads
iTunes: How to re-create your iTunes library and playlists
Next try:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache

hi,
I have created a separate project which contains a class which has some generic methods- its a Utility class.[ its a class library project ]
I added this dll into my SharePoint project's wsp package [package--> advanced-->add assembly project from output ] [ SP 2013/ VS 2012]
So till yesterday everything was working fine, its has successfully deployed in the GAC.
But today when I tried to deploy my solution I got this error
"Error occured in deployment step 'Add Solution': Error: Cannot add the specified assembly to the global assembly cache" .
I closed the VS and did iisreset , and uninstalled dll using powershell . and i went to package removed the dll from the wsp package and deployed again.
Now when i added the dll into this package again, it failed to deploy.
can anyone tell , why this is happening. i have not done any changes in the dll yesterday or today.
suddenly , it started behavin stranegly.

Use the power shell command to delete dll
http://www.c-sharpcorner.com/uploadfile/anavijai/how-to-install-or-uninstall-dll-in-gac-using-powershell/

Requirement and step to add a second CUCM7.0 on the cluster

Hi all,
Currently I have a single CUCM and UCCX on the cluster. I am going to add the second CUCM and UCCX in the cluster. What are the licence requirements and the steps for the installation of second CUCM7.0.
Regards
Ali Raza

Hi,
I have a first CUCM 7.0 with the following licenses.
LIC-CM7.1-7816=
License CM 7.0   7815/7816 Appliance, 500 seats
1
LIC-CM-DL-10=
Unified CM Device   License - 10 units
5
Now I have the second the CUCM 7.0 and the licence that I have for this is
LIC-CM7.0-7816=
License CM 7.0   7815/7816 Appliance
1
Do this license fullfil my requirement or I need more licenses? I have to upload this license on a second node or on the first one? I have to generate this license with the MAC of first node or with the MAC of second node?
And from where we can update the CTL file?
Thanks
Ali Raza

I have a creative cloud subscription for myself and 2 other colleagues but cannot add the other 2 colleagues as users. How do I do this?

I have a creative cloud subscription for myself and 2 other colleagues but cannot add the other 2 colleagues as users. How do I do this?

Hi American,
I checked you account and I found that you just have 1 seat in your Creative Cloud account. You need to add a license from the top right corner on your Team admin page.
You can follow the article: Creative Cloud Help | Manage your Creative Cloud for teams membership which will help you to add a license in your Team account.
Let us know if you face any troubles while doing that.
Thanks,
Ratandeep Arora

How do I add a webcal subscription to my iCloud calendar?

Hello.
I switched to Lion and iCloud yesterday. I was able to move my calendar from MobileMe to iCloud and it's also in my iCal just fine.
I also have a webcal subscription from a scheduling service that manages my client appointments (webcal://www.acuityscheduling.com/..... --not going to post the actual address here). I am able to subscribe in iCal just fine, but I'd also like to have those appointments in my iCloud calendar at icloud.com, so I can access it when I'm not at my main computer.
How do I add that webcal subscription to my iCloud calendar?
Thank you!

Thanks Tbird360!!!
Great! it works as stated. I even tried subscriping it from iphone Calendar subscription and it worked. Now I could access my calendar on my iphone directly.
steps here
MS Outlook -> Calendar -> Publish Online -> updates
choose WebDav service providers that provide the service. I chose box.com.
Box.com would give webdav url
use that on your iphone settings->mail, calendar-> add Calendar subscription -> https://url ends with .ical (replace webcal:// with https://)
enter userid and pwd of box.com
Thats it. it works great..
It would hv been better if icloud has webdav publishing option though.
Thanks
Navaneeth
Tbird360 wrote:
Sorry this isn't true. When you are in iCal on your machine go to File - New Calendar Subscription then paste in your link (webcal://www.acuityscheduling.com/.....) then edit your link and remove webcal and replace with https (https://www.acuityscheduling.com/.....) your link has to be ics compliant and make sure you change the location to iCloud then it should work.

How do I add a new subscription key in Aruba Central?

Q: How do I add a new subscription key in Aruba Central?
A: As part of latest enhancements in Aruba Central, a user can now add the subscriptions to the account. Once the order is processed by the Order Management Team, end-user would receive a 9 digit "subscription key" on his/her email address , as mentioned in the PO submitted to Aruba.
There after, administrator with the help of below steps can add key to the Aruba Central account:
Login to Aruba Central and click on "All Groups"
Under "Maintenance" click on "Subscription Keys"
Under the "Search' text box, click on the hyperlink that says "Add Another Subscription Key"
5. Enter the subscription key received on email and hit "Activate"

You need to log into your emali on your computer and create the new folder from there.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

Try to add the ESX to n1kv it give the below error got (vim.fault.PlatformConfigFault) exception

Hello i m sharing to the forum the discussion we had in fb about my issue with a host see below:
Guys anyone saw this error when u try to add the ESX to n1kv it give the below error
vDS operation failed on host esxXX, An error occurred during host configuration. got (vim.fault.PlatformConfigFault) exception
on the esx it shows correct version of vem version
/var/log # esxcli software vib list | grep cisco
cisco-vem-v162-esx 4.2.1.2.2.1a.0-3.0.1 Cisco PartnerSupported 2013-10-29
I did try with the version Nexus1000v.4.2.1.SV2.1.1 and then with this is the latest version of cisco Nexus1000v.4.2.1.SV2.2.1a but shows same error
maybe u guys saw it before
- Robert Burns - Usually means the VSM doesn't have the appropriate VIB file for that version of ESX. You can simply manually install it using ESX CLI. You can pull down the appropriate VIB from VMware's site. Which version of ESX (Build) are you running?
- ME - i think maybe is related to old config of old n1kv i tried add another host and it works but it doesn t show the same dvs switch name
cannot add this host to n1kv
/var/log # net-dvs -l
switch 38 51 17 50 5d df 21 d0-29 b5 8c a7 df e8 e0 1b (cisco_nexus_1000v)
working ifne
~ # net-dvs -l
switch 09 72 17 50 f3 d5 87 8f-71 5b 8c 57 f5 fe b8 6a (cisco_nexus_1000v)
- ME - by the way both esxi have same build
~ # vmware -vl
VMware ESXi 5.0.0 build-1117897
VMware ESXi 5.0.0 Update 2
/var/log # vmware -vl
VMware ESXi 5.0.0 build-1117897
VMware ESXi 5.0.0 Update 2
- Robert Burns - Are the two N1K's different versions? Likely yes. In that case your VSMs have the appropriate VIB for ONE version of VSM, but not the other.
- ME - both have the same version
~ # esxcli software vib list | grep cisco
cisco-vem-v162-esx 4.2.1.2.2.1a.0-3.0.1 Cisco PartnerSupported 2013-10-29
/var/log # esxcli software vib list | grep cisco
cisco-vem-v162-esx 4.2.1.2.2.1a.0-3.0.1 Cisco PartnerSupported 2013-10-29
- ME - but one is already now part of n1kv and the other doesnt want to be added
- Robert Burns - Have you tried doing a hotswap -u - reboot - then try to re-add the host.
- ME - the command vemcmd show card shows that he still think he s part of the old n1kv switch i will try the reload maybe that will help
- ME - /var/log # hotswap.sh -u - reboot
The following switch is of type cisco_nexus_1000v: DvsPortset-0
Starting time: Tue Oct 29 17:22:18 UTC 2013
Errors:
Sysinfo error on operation returned status : Not found. Please see the VMkernel log for detailed error information
stopDpa
VEM SwISCSI PID is
Warn: DPA running host/vim/vimuser/cisco/vem/vemdpa.80389
Warn: DPA running host/vim/vimuser/cisco/vem/vemdpa.80389
watchdog-vemdpa: Terminating watchdog process with PID 80382
Unload N1k switch modules
stop stun
Module vem-v162-stun being unloaded..
Module vem-v162-stun unloaded..
Module vem-v162-vssnet being unloaded..
Module vem-v162-vssnet unloaded..
Module vem-v162-n1kv being unloaded..
Module vem-v162-n1kv unloaded..
Module vem-v162-l2device being unloaded..
Module vem-v162-l2device unloaded..
Unload of N1k modules done.
did it and tried to re-add and it shows the same error...
the net-dvs still shows another switch name
/var/log # net-dvs -l
switch 38 51 17 50 5d df 21 d0-29 b5 8c a7 df e8 e0 1b (cisco_nexus_1000v)
- ME - i m trying a reboot of the host ...crossing fingers
- Robert Burns - Let's take the issue over to support forums and save the group of the spam
- ME - it s working after a reboot of the esxi host , it was showing a warning out of sync and i did re-sync in vsphere and it removed the warning.

So just to be clear - your issue is resolved?
Robert

URG !!!!!!! How do i add the conext information to my server.xml of tomcat

Hi ,
I want to add the conext information to my server.xml of tomcat for my hibernate configuration.....
the conext information is as follows ....
<Context path="/quickstart" docBase="quickstart">
<Resource name="jdbc/quickstart" scope="Shareable" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/quickstart">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:postgresql://localhost/quickstart</value>
</parameter>
<parameter>
<name>driverClassName</name><value>org.postgresql.Driver</value>
</parameter>
<parameter>
<name>username</name>
<value>quickstart</value>
</parameter>
<parameter>
<name>password</name>
<value>secret</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>3000</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>100</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
</ResourceParams>
</Context>
Where in my server.xml should i put

I don't think you should have to edit the server.xml
at all. your app can have its own context.xml that
obviates the need for editing server.xml
%I did try that in many permutations. For some reason, the server.xml worked for me in 5.5 but not the context.xml. (Granted, it was late on Friday and I might have missed a step). :^)
- Saish

Steps to add the pull subscription on secondary (post failover) in 2012

Similar Messages

Maybe you are looking for