Steps to change SID in EP 7

Hi,
Could you please provide me the Procedure for SID Change for Enterprise Portal.
I have checked the Document for Sytem Copy for EP but there I don't find the SID Change Steps.
Please provide you valuable suggestions.Thanks

Hello,
I don't believe they spell it out anywhere, but during a system copy you can change the SID simply by using a different SID for the target system when prompted. I can't remember if it's during the export or the import step, but it will do all the database changes for you.
You can change a SID manually but I'd really advise against it for anything other than a sandbox or other fully expendable system. It's just too easy to mess up, the process is database dependant and system copies are actually quite easy to do so why bother?
Michael

Similar Messages

What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

Changing SID CRM

hi everyone,
We need a procedure to change SID of a CRM system. We want to known the steps to make it. We have a solaris system with an oracle database.
thanks in advance.
Fitto

Thanks a lot for the reply,
Eventually someone got what I mean?
Actually that's the place that I found my answer few days ago and I've done the same thing and endup with this problem.
So when I published my problem, everyone keep telling me use NID.
Now, do you think the problem is in the Listener.ora?
Because, as you can see in the first post, the error is talking about parsing problem.
Thanks again
Amir

HT201356 Can you please put the steps to change the rescuer email address since I cannot receive any emails

Can you please put the steps to change the rescuer email address since I cannot receive any emails

The steps on the page that you posted from should work, but you can only change your rescue email address if you remember your answers to your security questions :
- log into the account via the 'manage your apple id' button on http://appleid.apple.com
- select the Password & Security section on the left-hand side of your account's screen
- answer the account's security questions
- you will then get a screen where you can change the address (and/or the questions)
If you can't remember your answers, and you aren't receiving the reset email to your current rescue email account (and you've checked the spam folder as well as the inbox on it, and tried clicking the reset link again) then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form to contact Support : https://www.apple.com/emea/support/itunes/contact.html
When they've been reset follow the above steps for changing your rescue email address

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

How to Change SID at SAP level

Hi Teachies
I had backup and restored the development system by brtools,
I want to change the SID at SAP level , i have to note to change SID at Databse level .
What are the changes we need to do at SAP level.
ENV : Solaries, oracle 10g , ECC
Thank You
Haroon

A SID can´t be "changed", you will need to do a system copy according to
http://service.sap.com/systemcopy
Basically - install the system with a different SID and import the database backup.
It´s not possible to change a SID after installation.
Markus

Post Processing after Changing SID

Hi,
After following the procedure in:
Change SID
I am able to start msg_server but stuck with the follwing with Java still not starting up.
I wonder about Java instance ID, what happens with the instance ID if the above procedure is followed. I have carefully changed configurations, settings...and am able to logon on ABAP side...but Java being down I cannot release the system properly.
Please advise asto what is still missing in corelation with changing SID in such a way.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        C7Q
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    185
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        5856
Sun May 24 13:05:07 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5856) [dpxxdisp.c   1285]
     shared lib "dw_xml.dll" version 185 successfully loaded
     shared lib "dw_xtc.dll" version 185 successfully loaded
     shared lib "dw_stl.dll" version 185 successfully loaded
     shared lib "dw_gui.dll" version 185 successfully loaded
     shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun May 24 13:05:11 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >UT1VC7Q01_C7Q_01                        <
DpShMCreate: sizeof(wp_adm)          59568     (1752)
DpShMCreate: sizeof(tm_adm)          58861440     (29416)
DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=4000/16/4416064/4416080
DpShMCreate: sizeof(comm_adm)          4416080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm)          156064     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=6600/16/633664/633680
DpShMCreate: sizeof(file_adm)          633680     (72)
DpShMCreate: sizeof(vmc_adm)          61520     (1864)
DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F0B0050, size: 65199728)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0C0AA0
DpShMCreate: allocated tm_adm at 000000000F0C0B00
DpShMCreate: allocated wp_ca_adm at 00000000128E3280
DpShMCreate: allocated appc_ca_adm at 00000000128F6B00
DpShMCreate: allocated comm_adm at 000000001291DC00
DpShMCreate: allocated slock_adm at 0000000012D53E50
DpShMCreate: allocated file_adm at 0000000012D79FF0
DpShMCreate: allocated vmc_adm_list at 0000000012E14B40
DpShMCreate: allocated gw_adm at 0000000012E14BC0
DpShMCreate: allocated vmc_adm at 0000000012E14BF0
DpShMCreate: allocated ca_info at 0000000012E23C40
DpShMCreate: allocated wall_adm at 0000000012E23C50
Sun May 24 13:05:12 2009
MBUF state OFF
DpCommInitTable: init table for 4000 entries
DpFileInitTable: init table for 6600 entries
Sun May 24 13:05:13 2009
DpSesCreateTable: created session table at 0000000018FD0050 (len=1434432)
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.
Sun May 24 13:05:14 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5088
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:05:15 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1692]
***LOG Q0K=> DpMsAttach, mscon ( UT1VC7Q01) [dpxxdisp.c   12429]
DpStartStopMsg: send start message (myname is >UT1VC7Q01_C7Q_01                        <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Sun May 24 13:05:16 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun May 24 13:05:22 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
Sun May 24 13:05:23 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:06:36 2009
MBUF state ACTIVE
Sun May 24 13:06:37 2009
DpModState: change server state from STARTING to ACTIVE
Sun May 24 13:08:31 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 104
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1619) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5088)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN

Remainder of the log:
Sun May 24 13:08:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:08:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:08:55 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 44
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1780) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4904
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:28 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 40
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1792) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4904)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4640
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:09:36 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:09:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1802) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4640)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:09:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5920
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:03 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 32
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1810) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5920)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2728
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:10:23 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 28
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1816) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2728)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:10:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Sun May 24 13:10:37 2009
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:04 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 20
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1824) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:15 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4976
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64993
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:27 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 36
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1836) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4976)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:35 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5500
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:11:45 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 16
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1851) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5500)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:11:55 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4304
argv[0] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[1] = H:\usr\sap\C7Q\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=C7Q
argv[7] = -DSAPMYNAME=UT1VC7Q01_C7Q_01
argv[8] = -DSAPPROFILE=H:\usr\sap\C7Q\SYS\profile\C7Q_DVEBMGS01_UT1VC7Q01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun May 24 13:12:02 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 12
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1857) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4304)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun May 24 13:12:15 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Thank you for your help and time in advance.

Modifiable Request Status after changing SID

Hi All,
I need to change DEV Systemu2019 SID but there is some modifiable change requests (There are many records in TLock Table). DEV System is the Transport Controller.
Should all change requests be released before changing SID or System Copy process doesnu2019t related to this issue.
Is there any possibility for change request loss during this process?
Any Idea will be greatly appreciated.
Thanks in advance,
Sanaz.

Thank you for the reply.
I have done a test scenario as follows:
- SAP Fresh Installation
- Restore DEV DB
- System Copy
Now there is no record in TLOCK table.
Does it mean that I had to release all modifiable requests before this scenario?
Any idea regarding this issue will be greatly appreciated,
Sanaz.

Changing SID Server 2012

Hello,
In Server 2008, to be able to create new VM using same (copied) VHD, we had to use SYSREP to change SID or 3rd party tools, if we wanted to join it to the same domain, otherwise we got an instability on servers.
How can we change/update SID in server 2012? I can't find SYSPREP nor other tool.
Or maybe we don't need to change SID anymore?
Thanks

I belive you don't need to, it's actually just a precaution...
Though, if you are using domains, you might need to opt the server out of the domain, and then join the domain again.
If you are also using it to connect to your own wsus server, you might need to run a registry script with this:
@echo off
Echo Save the batch file "AU_Clean_SID.cmd". This batch file will do the following:
Echo 1. Stop the wuauserv service
Echo 2. Delete the AccountDomainSid registry key (if it exists)
Echo 3. Delete the PingID registry key (if it exists)
Echo 4. Delete the SusClientId registry key (if it exists)
Pause
@echo on
net stop wuauserv
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v AccountDomainSid /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v PingID /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v SusClientId /f
Pause
net start wuauserv
Just save it as f.ex. Delkeys.reg
And then register it to get updates from wsus server again.
"Real men don't use backups, they post their stuff on public ftp servers, and let the rest of the world make copies"

Changing SID Windows 7

Hi All,
Can anyone help with this - sorry in advanvce as I am not sure where to post the question!
I need to change the SID on some Windows 7 PC's I was tols about a program called NEWSID but this doesn't work in Windows 7.
Is there any other utility that will do this with ease?
Thanks in advance,
Chris.

Take a look at the following address
http://www.brajkovic.info/windows-server-2008/windows-server-2008-r2/how-to-change-sid-on-windows-7-and-windows-server-2008-r2-using-sysprep/
I also quote a sentence from a Mark Russinovich's post in his blog (http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx) that says
that "...Sysprep doesn’t support changing the SIDs of computers that have applications installed.": so, pay attention to what you do!
Bye.
Luigi Bruno - Microsoft Community Contributor 2011 Award

How to change SID during sustem copy

How do we change SID of the sandbox system on which we are going to copy production data, using homogeneous system copy pr.

It is explained in the homogeneous system copy guide. It is not difficult at all but you need to uninstall sandbox system first.

Possible To Change SID / Retain Data?

I have a Oracle 11.2.0.3 VM running with a 12.2 GB database size. Currently I would like to take a snapshot / clone of the Oracle database 11g and replicate it. Obviously I would change the Linux OS hostname / IP parameters to avoid conflicts on the LAN however I would like to know if its possible in Oracle 11g (and acceptable) to change the SID on the said cloned machine once the machine has been replicated?
Currently my SID on the above mentioned database is ATL and after I snapshot the virtual machine and get the OS parameters unique, I'd like to make the SID = ORL. Is this acceptable in the Oracle DBA community or is it highly frowned upon to make changes to a SID once there has been data added to the database?

Yes you can change SID for Database after clone .
you can do that by using dbverify or recreate controlfile
http://www.adp-gmbh.ch/ora/admin/rename_db.html

What are the steps to change the "main" plan administrator

The main plan administrator is a former employee. What are the steps to change the "main" admin to another admin?

Hi StevenFel,
Welcome to Adobe Forum,
I understand that you are refering to CC Team purchased for 2 seats under the Adobe ID provided here.
Please refer to http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html#Man age Plan Administrators
Please let us know if it resolved the issue.
Regards,
Rajshree

Reduce steps to change calendar entries

Dear OS10 development team,
You need to introduce fewer steps when changing an existing entry:
1) only click on the appointment u can instantly edit it
2) you hold down an appointment and you can drag it to a new time on the same day
3) when a remind dialog box pops up on the screen, don't have a choice to View It but to Edit It!

The same here:
1) I am happy as it is -- rarely editing added entries, often opening and viewing (because of the missing full-integration with the Global Search, but that is another topic)
2) That would be a killer. Currently there is no command assigned to a selected entry.
3) I would be glad to have drop-down menu to snooze by 15mins, 30mins, 60mins, 3 hours, 6hours or a full day. Mostly happens with Remember tasks. When I do not want to deal with the task today, I have to open the task and edit the reminder time.

Steps to change shared storage but retain VM's

is there a link to the steps to change san?
i have a larger one arriving but i need to retain the vm landscape (only the vm's data in the repo - not the real luns they use)
is it just a case of copying the contents of the old repository into a new one i create on the new san? but then how does the info in vm manager get updated ?
is there a note somewhere?
thanks

Martin Brambley wrote:
I created a new repo on the new SAN and then copied the contents from the old in (I did this by going to the repo dir /OVS/repos/ and cp -rp * from old into the new (the .ovsrepo file left unchanged)
then I refreshed the repo in the manager and nothing has changed it still says the new repo in empty? what should i doYou need to ensure that the new repo is presented and that all the vm.cfg files are updated with the correct location of their virtual disk images.
also even if i move repo onto the new SAN how do I get the server pool HB cluster onto the new SAN as i need to remove this old SAN This is a much bigger issue: there is no simple way to move the pool filesystem. Well, there is: delete and recreate the pool. However, this will lead to issues with the repositories as they are formatted with the cluster ID of the current pool/cluster and if you create a new one, you will not be able to mount the repositories any more.
I strongly urge you to work with Oracle Support on this: there are tools we can use to stamp new cluster IDs to running OCFS2 volumes.

Steps to change SID in EP 7

Similar Messages

Maybe you are looking for