Steps to complete the pay run process

I need steps to complete the pay run process in detail.

Yes! I have got the answer from Metalink "WHITE PAPER : R12 Payment Process Request - Functional and Technical Information"

Similar Messages

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

The resource requires a restart to complete the patch update process

Has anyone seen this message?
"The resource requires a restart to complete the patch update process"
Ever since I updated Safari to 7.1 on my MacBook Air on Friday, I've been getting this pop up every couple of hours. It tells me that the computer will restart automatically in five minutes if action is not taken. So I can either restart manually or postpone the restart. I've never seen this type of pop up on a Mac before so I hesitate to restart. It just doesn't look like an update Apple would have. Attached is a screen grab. Please let me know if you know what this might be for. I just want to make sure nothing has infected the Mac. Thanks

Have you downloaded anything lately?
It might be adware.
Manual method
Malware – Adware removal – Apple Support
Or download this program which was written by Thomas Reed, a long time poster. The program will do the work for you which makes it easy. If you are uncertain about downloading programs, try the manual method.
Malware Guide – AdwareMedic – 10.7 and higher

I reset my IPAD password but the verification email wasn't sent to my primary or secondary email address. Without the verification email I can't complete the password change process. Any recommendations?

I reset my IPAD password but the verification email wasn't sent to my primary or secondary email address. Without the verification email I can't complete the password change process. Any recommendations?

Great tip from dorothy. Also, some isp services are more aggressive from others in filtering what they think might be spam. You might check your spam file from a computer, and see if the verification e mails are sitting there. When i wen through the process, the verification e mail came to the new e mail address in under a couple of minutes.

How to stop a process chain after the current running process

Hi experts,
I try to stop a running process chain, but only at the end of the current process load.
I try to unscheduled process chain : the job of the current process is killed and the process stop
I try to execute the programm rspc_process_finsh : same result.
Actually, I aim at waiting of the current process completion and stop the chain.
Thanks and regards,
Bobby

Hi all,
Thanks for answer.
If I resume the situation :
- Click on Unschedule process chain stop the current process. We have to change the status of the process in Yellow to Red.
- Go to sm37 to kill the job change the statut in red.
So there is no way to stop the running of a process chain only after the good or bad end of the last runnning process ?
Example :
My chain is running. The process which is running is a DTP loading process. There are 50 packages to load. I decide to click on Unschedule process chain when the package 18 is running.
If I do that, the loading of package 19 will not start right ?
So is there a way to wait that the 50 packages are loaded before that the system stop the chain ?
Thanks in advance,
Bobby.

Error message: Errors occurred during installation before ITunes could be configured. Your systerm has not been modified. To complete the installation, run the installer again.

Trying to install iTunes and keep getting the following error message: "Errors occurred during installatino before iTunes could be configured. Your system has not been modified. To complete the installation, runthe installer again.
This message appears everytime I try to install iTunes. Help!

See Troubleshooting issues with iTunes for Windows updates.
tt2

My iphone 5 is making me complete the whole activation process over again whenever I turn it off and sometimes when I turn the screen off. Also my icloud will not connect. Help!

Basically yesterday my iphone started requiring me to go through the activation process (connecting to wifi, logging in to itunes,etc.) I have tried r

I have tried restarting it but each time it requires me to log in again.

How to automate the Daily running process

Here is the senario
There are 24 data transfer packages which loads data into SQL Server 2008R2 everyday using a loading tool. There is only one log table is there which shows only package name and the thru date where
package got loaded into Database
The package names in log table and package names in loading tool have somewhat different naming format.
Every day I have to monitor the loading tool to see exactly on which date the packages getting data. (note that out of 25 packages 4 packages always gave t-1 date i.e. yesterday as per business
logic
Now I want to automate this process and set an SSRS mail alert for successful execution of packages as per business dates so how can I do that?
Thank you in advance

Ok for this requirement you can do like below
1. Add custom logging in your packages using EVent Handlers to log the execution details along with package name etc to your custom logging table
http://consultingblogs.emc.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx
2. Create a SSRS report which would pull data from this log table you created and show execution data for packages for the required date range
3. Add a data driven sunscription in SSRS to deliver the above report through email to your required distribution list
http://technet.microsoft.com/en-us/library/aa237461(v=sql.80).aspx
http://jesborland.wordpress.com/2010/08/26/the-power-of-reporting-services-subscriptions-%E2%80%93-data-driven-subscriptions-%E2%80%93-e-mail/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Installation of itunes 11.5.1 failed. I get the following message "errors occurred during installation before Itunes could be configured. Your system has not been modified. To complete the installation run the installer again. So I tired agian and again

I went into control panel unistalled apple mobile device support, apple software update, apple application support,and bonjour. i have QuickTime 7.7.5 installed on laptop. I rebooted and tired again failed same error. I removed the apple programs again went into registry and deleted any reference to apple or itunes. I deleted files in program x86 directory, common files. reboot reinstalled failed. any suggestions?
Using 2 ipad airs need at least 11.1 cannot install new itunes but I can insta ll old versions but that will not work with new ipads..
Windows 8

See Troubleshooting issues with iTunes for Windows updates.
tt2

HT6001 installation of itunes 11.5.1 failed. I get the following message "errors occurred during installation before Itunes could be configured. Your system has not been modified. To complete the installation run the installer again. So I tired agian and

I went into control panel unistalled apple mobile device support, apple software update, apple application support,and bonjour. I rebooted and tired again failed same error. removed the apple programs again went into registry and deleted and reference to apple or itunes. deleted files in program x86 directory, common files. reboot reinstalled failed. any suggestions?
Using 2 ipad airs need at least 11.1 cannot new itunes but can insta;ll old versions but that will not work with new ipads..

See Troubleshooting issues with iTunes for Windows updates.
tt2

I can't complete the sign up process.

The wizard at https://creative.adobe.com/join/pro ends in an infinite loop of sadness. When I get to the section for entering my credit card details and address, I fill in the correct details and click "Continue". The loading throbber appears for a few moments and is then replaced with the *same* screen, requesting that I fill in my address details again (the credit card details appear to be saved). No matter what I do I cannot get past this screen.
How do I get past this?

I have the same issue and spent about 2 hours over two days on the phone to Adobe with no luck. I have used IE, Firefox, Chrome, and Safari on three different computers. Rebooted, removed cookies, tried a rebuilt PC, etc, etc. After the first time when it gave me the upgrade button it no longer gives me an option to upgrade. I log out and try to purchase creative cloud as an upgrade and I get an upgrade option again but it gets to the credit card screen and wont go further. It goes into a loop just like this user had. It's obviously an issue at Adobe's end given all the browsers and even trying a newly rebuilt computer. I just wish they would fix it because I have to have time off work to call their business hours only sales help desk. It's already a very expensive upgrade with the time I have spent on the phone to them.
I wish they would just upgrade me from their end and stop wasting my time.

HT201328 How do I complete the set up process after putting the new SIM card in it just keeps saying sim fail?

I have confirmed my phone can be unlocked waited the 72 hours
Am using wifi but when I put a new sim in it still says sim fail
The instructions just say insert new sim and follow set up process

Contact your carrier to find out what the problem is.

How to automatically confirm check pay run (payment process request) in R12

Payment Method = check
The payment process profile (ppp) settings are as follows:
Processing Type=Printed
Payment Completion Point = When the Payment Instruction is Formatted
Default Payment Document= blank/null
Payment File=Send to File
My question is this. Is it possible or how do you configure oracle payments (PAYMENT PROCESS PROFILE [PPP] and/or PAYMENT PROCESS REQUEST [PPR])for check payments created as a file output like you have in 'EFT' instead of printing the checks and CONFIRM the PPR/payments AUTOMATICALLY after the checks/payments have been formatted.
The reason we are doing this is because we want an external agency to print the checks for my organisation.
What is happening at the moment is that the PPR runs and the payments file is created successfully. At this point, the PPR is in 'FORMATTED - READY FOR RECORDING' status. The PPR then remain in this status until it is manually confirmed by clicking the 'Take Action' icon in the 'payment instruction' tab and then clicking on 'CONFIRM'.
If the PPR is left in the above status, then the next submitted check pay run errors because the payment document(s) are still locked by the pay run that is in the 'Formatted - Ready for Recording' state.
If it is not possible to configure Oracle payments to auto confirm the check pay run of this type, is an API available that can be called to confirm check payments - once they are in the formatted status.
I've looked at the following notes in 'My Oracle Support', but they are not much use.
Note 1097547.1 is related to bug 8781032 which talks about "Automatic Initiate when Payment Process Request is Complete".
and then Note 1215392.1 relates to enhancement request.
Bug 10142423: GIVE AN OPTION IN PAYMENT PROCESS PROFILE TO SUBMIT POSITIVE PAY FILE AUTOMATIC
Thanks.

Try running this SQL
SELECT
r.calling_app_id,
r.created_by,
r.payment_service_request_id,
r.creation_date,
r.call_app_pay_service_req_code,
fa.application_name,
fu.user_name,
r.payment_service_request_status
FROM
iby_pay_service_requests r,
fnd_application_vl fa,
fnd_user fu
WHERE r.payment_service_request_id = <<your concurrent request ID>>
AND r.calling_app_id = fa.application_id(+)
AND r.created_by = fu.user_id(+)

"You must close your browser to complete the signout process" - Mandatory?

I notice when a users clicks sign out they get a message "You must close your browser to complete the signout process." Is this required or can one change this behavior? I see this as rude, as someone who has lots
of tabs open in IE will be forced to close the entire IE session and lose their tabs.
spnewbie

Depending on your browser and setting this may be necessary to close the browser. SharePoint is not being rude, its just trying to protect you.
Read the following thread. Andres has provided good explanation for why this is required.
http://sharepoint.stackexchange.com/questions/3344/you-must-close-your-browser-to-complete-the-sign-out-process
Amit

Monitoring the running process

hi all!
i am working on antispyware.
my problem is:
how to monitor the computer running processes from the attacking of any spyware/virus
if some one has sample code, plz send me
plz guide me in this regard, so i can proceed in my work.
best regards

Thanks.
That makes no sense. Especially given that listener handles the connect and then no longer is involved in the communication between client and database.
I would strongly suggest you check Metalink, or even open a service request. This sounds like it could be a memory leak. Do it now, while it is still possible - 9i goes into extended support in a few weeks and bug fixes will be difficult to arrange.

Steps to complete the pay run process

Similar Messages

Maybe you are looking for