Steps to Configure Cisco Mobile 8.0

Hi,
Need to know how to configure the Cisco Mobile 8.0 , i have downloaded the application on the iphone. Please provide me the steps to configure it on call manager.
Is it possible to get screen short of the configuration.
Thanks
Abhishek

Everything you need to know about setting up Cisco Mobile 8.0 or 8.1 on the Communications Manager can be found in the Administration Guide.

Similar Messages

Cisco Mobile 8.0 iphone: How to configure the Directory? is it the same on the IP phones?

Hi,
I have a few iphones running Mobile 8.0 and Mobile 8.1. Everything works fine except for the Directory.
Im looking to get the the directory working on the Mobile 8.x phones; the Coorporate Directory (the same as in the IP Phones) is this possible on the Cisco Mobile 8.X?
If so, how to get it to work?
I've read about setting up LDAP for the Mobile 8.x phones; is this what's needed or is this to access my MS Active Directoy data from my business side?
Im running UCCM 7.x and on my IP phones I have an option 5 for Coorporate Directory, I want this on my Mobile 8.x phones.
thanks

Your organisation's Active Directory is what I'm referring to (or most other LDAP directories if you're not using AD, although they're not all supported). You would indeed need to populate your Active Directory with the user's extension numbers for this to be of any use to you.
We do indeed use the directory on Cisco Mobile, but because we already have all End Users in our Communications Manager imported via LDAP, we're not maintaining two directories, the number that the End User is allocated comes from our LDAP database.
If all your phone users are manually created then you are going to have a bit of extra administration burden to provide the directory to Cisco Mobile users.

Cisco mobile does not running in the background ont my ipad

Hi
I have a Cisco Callmanager 7.1.5, an ASA5510, an Iphone and an Ipad
I have configure the VPN on my iphone and my ipad and I can make a VPN connection to the ASA through the WIFI
I have configure the Cisco Mobile 8.1.2.3245 on my iphone and my ipad.
If the application is open, I am connected to the CCM and I can make and receive calls.
On the iphone when the application is running in the background, its good I can receive calls
On the ipad when the application is running in the background, I can't receive calls, I am unregistered
On the ipad, if I disconnect the VPN, and make a WIFI connection on my local network. When the application is running in the background, I can receive calls.
It is an ipad2 with iso 5.0.1 (9A405)
I reverse the ID of the IPAD and IPHONE, and it is the same.
The problem is only on the IPAD when there is my VPN connection
Could you help me?
Thanks
nicolas

A double click on the Home button will reveal a tray containing all apps that are currently running (suspended?).
Side swiping this will reveal as many as are active, with a swipe to the right when on the first display will reveal further controls for the iPad, mainly relating to the iPod part, but also containing a screen lock option I believe.
Click and hold any one of them till they 'jiggle' and show a - you can then click this to remove it, relaunching the app as required in the normal way.
Regards,
Colin R.
Message was edited by: Colin Robinson
PS Tap the Home button once to get out of this mode.

Problem in configuring the Mobile Server.

Hi,
I am trying to configure Mobile Server for Apache for the Apache Server. I am following the steps listed in the Installation guide. As listed in the document I did the changes in the Apache Configuration file "httpd.conf" i.e. I included the Mobile Server module confuguration file into Apache Config file. On starting the apache server I am getting following listed warning,
"[Wed Apr 28 18:14:46 2004] [warn] Loaded DSO D:\oracle\oralite\mobile\server\bin\wtgapach.DLL uses plain Apache 1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)".
The Apache server is working and through browser I am able to access the default page. But as mentioned in the Mobile Server configuration section the Mobile server is not started or at least I do not know how to access the Mobile server through browser.
Please let me know if the cause of the warning message has any effect on the Mobile Server instantiation and if not how can I access the Mobile Server?
Thanks,
Sachin.

Hi,
I am trying to install the Oracle Lite suit versioned 5.0.2 for Windows. The RDBMS is Oralce 9i (9.2.0.1). I am able to install the Mobile server. Refering the Installation mannual I am trying to configure and run the mobile serve in either standalone mode or with Oracle HTTP server. In the installation mannual it is mentioned that the HTTPD.conf file for apache http server should be modified to include the wtgapach.conf file from the Oralce Lite ORACLE_HOME\mobile\server\bin folder. On making this change and starting the apache server I am getting the error listed in the post. In the mannual it is mentioned that for standalone mode run the webtogo executable from the bin folder. On doing so I am getting a message
"D:\oracle\oralite\Mobile\Server\bin>webtogo
Unrecognized option: -Xrs"
So currently I am stuck and do not know how to start the mobile server. Please let me know the appropriate steps to start the Mobile server in stadalone as well as with Oracle HTTP server.
Also as mentioned by you I replaced the wtgapach.conf with wtgias.conf. The warning message which was displaying earlier on start of Apache is now gone but if tried to start the mobile server from the browser it is not working as expected.
Thanks and Regards,
Sachin.

Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring

Hi all,
I am implementing Cisco Prime Collaboration to monitor the quality of the VoIP call.
I am following all the steps that I have to do to accomplish this task at this link:
http://docwiki.cisco.com/wiki/Setting_up_Devices_for_Prime_Collaboration_Assurance#Configuring_Unified_Contact_Center_Enterprise_Devices
And now I am arrived on this step:
Configure Cisco Mediatrace, Cisco IOS IP SLA, and Performance Monitoring
Not all the Cisco devices that I have on the network are "Mediatrace, IP SLA and Performance Monitoring" capabilities. The core switch is one of them.
What will happen if some devices are configured with these capabilities and some are not?
Are the data provided from Cisco Collaboration still reliable?
Thanks in advance.
Luigi

I can't see a reason why the 2 features won't work together. The 2 features will work just fine with each other.
Unfortunately there is no sample config with both feature in the same document, but it will work just fine.

Install and configure Cisco Network Analysis Module NAM-2

Hi,
Does anyone have a step-by-step document on how to install and configure Cisco NAM-2 module ?
Thanks in advance.
Regards,
Lamine

Hi Lamine,
The official installation guides for NAM software can be found here:
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/prod_installation_guides_list.html
Is this what you are looking for?
Cheers,
Shane

Cisco Mobile 8.1 w/iPhone 4 - Outbound Call Fails

Hello Everyone,
Using CUCM 7.1.5 and Cisco Mobile iPhone app, I set up my boss's iPhone 4 and it registers and can receive calls. I am getting a "Call Failed" when trying to make an outbound call using internal 5-digit dialing. Has anyone set this up? Is it necessary to configure these Application Dialing Rules (and install the COP file for them) that are referenced in the Cisco Mobile Admin Guide? I interpretted those rules as optional, if you want to set up things like bypassing dialing 9 for PSTN access, etc. Shouldn't the internal dialing work since the phone is registered?
Grateful for any help,
Kelly

No, you do not need Application Dial Rules for Iphone to IPPhone calls. ADR are for
like you said to add a 9, remove the + and manipluate digits.
I suggest you open a case with the TAC to help you see why you cannot call. Maybe issue
with ASA or something.
George

Cisco Mobile 8.0 For CME 8.6 : Verification Timed Out

Hi Guys,
Good day!
Anyone tried to implement Cisco Mobile on CME?
I have followed some guide lines from other forums such as:
http://www.ccierants.com/2011/05/finally-cisco-mobile-81-supports-cme-86.html
But I encounter some problems -> Verification Timed Out
Attached is the logs from CME router.
Thank you.

Have you restarted the "Cisco CallManager" service? Do you have IP address configured under CUCM > System > Servers?
Thanks!
Michael
http://htluo.blogspot.com

Configure AIM Mobile Forwarding

HI there,
I just got my iPhone 3GS and wanted to configure AIM Mobile Forwarding. I go through the steps but never receive the text message they say gets sent to your mobile device so I can enter the confirmation code.
I'm on Rogers network in Canada. Does mobile forwarding work in Canada?
Thanks

HI there,
I just got my iPhone 3GS and wanted to configure AIM Mobile Forwarding. I go through the steps but never receive the text message they say gets sent to your mobile device so I can enter the confirmation code.
I'm on Rogers network in Canada. Does mobile forwarding work in Canada?
Thanks

URGENT: Cisco Mobile in CUWL - how to order?

How to order Cisco Mobile in CUWL Pro beside clasic CUMA and CUMC implementation? Also, can I order UCM 8.5 in CUWL and then deploy it on VMware supported platform by Cisco? Is it even possible?
Nothing of this information you can't find on cisco.com. They say that, for instance, Cisco Mobile is part of CUWL Pro but when you configure ordering with DCT tool you can't select nothing except CUMA server 7.0 and CUMC various clients.
Also, you can't select Call manager for deploying on VMware platform and we all know that it is supported.
TIA,
Dragan

Yes, I saw that...but as you can see there is only option for iphone. But you have CUMC for Symbian, Blackberry, Windows etc. Also, you have mobile solution for all these platforms (mobile clients beside Cisco unified mobile communicator) but you can't select them throw CUWL and in ordering guide I saw option that you can order all of this in CUWL. So I think that DCT isn't updated yet accordingly to OG. I can't figure why especially in PRO CUWL because there you have everything...
Thx anyway,
Dragan

Steps to configure Information Rights Management in SharePoint 2013 On-Premise

Hi,
What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
Regards,

2. PHases
1. you will have to configure a IRM server
2. You will have to integrate IRM iwth sp server.
Below article should explain all
http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx

Steps to configure Planning Overview iView in MSS.

Need help with steps to configure/implement Planning Overview iView in MSS. I have done necessary configs in Define Attributes for planning overview in Customizing for ECM in R/3.
I have worked in ECM ECC 6.0 with employee based approval processes and now working on enh package4.
Thanks
Prav

Hi Vivek,
Thanks for taking time and answering. So, how do I integrate the Org Chart iVIew with these Position Profile and Organizational Unit Profiles pages? We do not need all the iViews that come with these pages. We only need the following
Position Profile
- Employee Group/Subgroup
- Holders
-Organizational Unit Profiles
-Organizational Unit Search
-Position Holders
Thanks
Preet

Steps to configure R/3 system to Portal implementation

Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
Thanks

Hello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022     SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022     SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022     SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022     SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022     SAP_R3_SelfServiceGenerics_MetaDataFIN
1.     Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2.     Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3.     Choose the Maintain JCo Destinations button.
4.     The available jCos are displayed with a red light, indicating that they are not yet maintained.
5.     In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6.     In Guided Procedure Section 1: General Data, make the following entries:
Field name     User action and values     Note
Name     <jCo_Name> or <jCo_name>_Metadata     Do not change the client number (for example, 100)
Maximal Pool Size     <keep default value>
Maximum connections     <keep default value>
Connection Timeout (msec.)     <keep default value>
Maximum Waiting Time (msec.)     <keep default value>
7.     Choose Next.
8.     In J2EE Cluster, make the following entries:
Field name     User action and values     Note
Use Local J2EE engine <SID> on <host>     Selected     Keep default values
9.     Choose Next.
10.     In Connection Type u2013 Data Type, make the following entries:
Field name     User action and values     Note
Data Type     Dictionary Meta Data     Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type     Load-balanced Connection (recommended)     For Dictionary Meta Data Connection, the value cannot be changed
11.     Choose Next.
12.     In Msg. Server Connection, make the following entries:
Field name     User action and values     Note
Message Server     <select message server for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
Logon Group     <select logon group for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
13.     Choose Next.
14.     In Security u2013 User Authentication, make the following entries:
Field name     User action and values     Note
Used Method     <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name     <enter connection user name>     For example, rfcsysuser
Password/Confirm Password     <enter a password>
Language     English
SNC Mode     Off     For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15.     Choose Next.
16.     In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17.     In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai

Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.

Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4

Prashant,
     Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
     The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
     You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
     thank you
     /michael
http://www.eclipselink.org

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Steps to Configure Cisco Mobile 8.0

Similar Messages

Maybe you are looking for