Steps to configure printer

Hi,
I need to configure Printer for the SAP Server
Please let me knwo the link for any documents

Hi Balaji,
It pretty simple, First make sure that you have configured the printer at os level and system can identfiy the printer at os level
then go to spad and create lp01 and just select what type of printing you want like frontend printing or local printing.
If you select front end prinitng the you can take the print in any system where printer is configured.
Reward points if helpfull.
Regards,
Vamshi.

Similar Messages

Implementation sd project blue print or step by step sd configuration

Hello everyone,
I am new here , Could anybody send me the implementation sd project blue print and step by step sd configuration guide my email is [email protected]
i need to have some practice in projects before i start with interviews
Thanks and Regards,
Ahmed hadi

Hi,
No body would give the business blue print of a project.
If any body gives the document he is against the company.
For your configuration steps it is given SPRO for the respective module
Thanks,
nandha

How to configure printing with apex 3.1.2

I am trying to use Apache FOP with Apex 3.1.2 and I am unable to find the place to configure Apex.
The document I am using is located at [http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html] and the important paragraph is the following:
Step 2: Configure Oracle Application Express to use the JSP for PDF printing
Once you have the FOP installed, access the Report Printing parameters:
1. Access the Administration Services home page
2. Select Manage Service
3. Select Instance Settings, under Manage Environment Settings
4. Click Report Printing to focus on just the Report Printing attributes
I am trying to locate those settings. In the page with the breadcrumb "Home>Administration>Manage Services" the is no "Manage Environment Settings".
Am I looking in the wrong place? Is there a special user that should be used, like sys?
The installation is an Oracle XE with the Apex upgraded to 3.1.2

You need to be logged in to the 'internal' workspace .
Varad

Best practice steps of configuration

Hello All
Can anyone write back on What is the best practice steps of configuration in HCM for a new implementation.
Thanks

Hi,
SAP Best Practices is prepacked ready to use solutions for small and medium size Business units (SMBs)
SAP Best practices is based on Building Block methodology
SAP Best Practices is fully documentation including preconfigured business processes, training material, data conversion tools, and test catalogs.
Best Practcies is totally Buidleing block Methods.
Building Blockss Contains:
Business Configuration Sets (BC Sets)
Sample master data
Configuration documentation
Print forms or reports
Business Configuration Sets are group of Configuration Sets. As We can say group of tables for specific Business Process.
for more details go help.sap.com., then go for Best practices you will very useful information.
Regs,
Brahma

What r spool requests and procedure of configuring printer in SAP

Hello Experts,
i hv one question? wt r spools and wt are spool requests ? what are they used for? also i need a step wise step procedure for configuring printer in SAP . My email id is [email protected] . Requested to revert at earliest as this is very urgent.
points guaranteed.
regards,
Somya

hi
whenevr u print ur output , spoll no. will be generated.
Go to TCode Sp01/SP02 and give the spool No. which u generated and there u can find ur spool with outputlist,
The basic transaction to set an printer within an SAP system is SPAD.
I would recommend you to access the online SAP help at the following URL where you will find detailed information on how to set printers :
http://help.sap.com/saphelp_46c/helpdata/en/d9/4aa45b51ea11d189570000e829fbbd/frameset.htm
regards
ajai

Steps to configure Information Rights Management in SharePoint 2013 On-Premise

Hi,
What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
Regards,

2. PHases
1. you will have to configure a IRM server
2. You will have to integrate IRM iwth sp server.
Below article should explain all
http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx

Steps to configure Planning Overview iView in MSS.

Need help with steps to configure/implement Planning Overview iView in MSS. I have done necessary configs in Define Attributes for planning overview in Customizing for ECM in R/3.
I have worked in ECM ECC 6.0 with employee based approval processes and now working on enh package4.
Thanks
Prav

Hi Vivek,
Thanks for taking time and answering. So, how do I integrate the Org Chart iVIew with these Position Profile and Organizational Unit Profiles pages? We do not need all the iViews that come with these pages. We only need the following
Position Profile
- Employee Group/Subgroup
- Holders
-Organizational Unit Profiles
-Organizational Unit Search
-Position Holders
Thanks
Preet

Steps to configure R/3 system to Portal implementation

Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
Thanks

Hello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022     SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022     SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022     SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022     SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022     SAP_R3_SelfServiceGenerics_MetaDataFIN
1.     Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2.     Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3.     Choose the Maintain JCo Destinations button.
4.     The available jCos are displayed with a red light, indicating that they are not yet maintained.
5.     In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6.     In Guided Procedure Section 1: General Data, make the following entries:
Field name     User action and values     Note
Name     <jCo_Name> or <jCo_name>_Metadata     Do not change the client number (for example, 100)
Maximal Pool Size     <keep default value>
Maximum connections     <keep default value>
Connection Timeout (msec.)     <keep default value>
Maximum Waiting Time (msec.)     <keep default value>
7.     Choose Next.
8.     In J2EE Cluster, make the following entries:
Field name     User action and values     Note
Use Local J2EE engine <SID> on <host>     Selected     Keep default values
9.     Choose Next.
10.     In Connection Type u2013 Data Type, make the following entries:
Field name     User action and values     Note
Data Type     Dictionary Meta Data     Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type     Load-balanced Connection (recommended)     For Dictionary Meta Data Connection, the value cannot be changed
11.     Choose Next.
12.     In Msg. Server Connection, make the following entries:
Field name     User action and values     Note
Message Server     <select message server for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
Logon Group     <select logon group for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
13.     Choose Next.
14.     In Security u2013 User Authentication, make the following entries:
Field name     User action and values     Note
Used Method     <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name     <enter connection user name>     For example, rfcsysuser
Password/Confirm Password     <enter a password>
Language     English
SNC Mode     Off     For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15.     Choose Next.
16.     In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17.     In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai

Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.

Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4

Prashant,
     Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
     The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
     You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
     thank you
     /michael
http://www.eclipselink.org

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Steps to configure XML Gateway in Oracle

Steps to configure XML Gateway in Oracle

Hello,
This is not relevant to Integration - B2B as you might want to post this query in Ebusiness suite forum.
Rgds,Ramesh

Error in running ibots - advise steps to configure BI scheduler

Hi All,
Can anyone help me to rectify the below error while tried to create ibots using OBIEE 10.1.3.4.1 ?
+++ ThreadID: 13ac : 2011-02-07 23:47:08.171 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure. Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC Odbc driver returned an error (SQLDriverConnectW). State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004) Error Codes: . Error Codes: AGEGTYVF +++ ThreadID: 13ac
I have followed all the steps mentioned in the material but i dont know what went wrong, if possible can anyone mention the series of steps to configure the BI scheduler.
Thank you,
Sudhakar

Did you try looking at the Administrator username and password in the Job Manager Configuration screen?
The error message "Authentication failed for Administrator in repository Star: invalid user/password" simply says that the userID and password do not match the same settings in the repository.
Refer to this thread
Could not create a Job with BI Scheduler
Thanks
Venkat krishna
Edited by: Venkat Krishna on Feb 8, 2011 10:22 AM

How to enable report print or configure print server

Hi All.
Currently using lastest Apex version (4.1.x) with 11g XE.
Where can i find info, example etc. to enable report printing? When i access this attribute section, i get a red warning message saying there is no print servver configure.
Regards, Luis ....!

Here is a whitepaper that should answer your questions..
http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html
Thank you,
Tony Miller
Dallas, TX

Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Steps to configure printer

Similar Messages

Maybe you are looking for