Steps to Configure Sendmail in Solaris 9
Can anyone provide me the SUN documents URL to configure sendmail in Solaris 9.
Any other good link will also do.
Thanks.
I have some questions:
The server in which I want to configure is running as a DNS client. and I want to configure a local mail so I think that i need to configure mail rather than configuring sendmail.
I get a document for configuring mail in solaris from docs.sun.com. The doc name is "Mail Administration Guide for Solaris 7".
This document has the steps to configure mail but my question is:
The server is already running as DNS client, in this case Do I have to install a new naming service to configure it as mail server?
Can we configure a server as NIS server when it is already a DNS client?
Suppose there is only one server, how do you configure mail server and client server and host server..can all three be done on only one server. Here there is one server and a few PCs need to be connected to it as clients.
Any suggestions?
David
Similar Messages
-
Re-installing and configuring Sendmail on Solaris 10
I made many attempts to configure my sendmail on a Solaris 10 server, but i could not mail out to anything. Assuming that sendmail files were corrupted, I uninstalled sendmail. I tried re-installing it from CD #1 of the Solaris 10 install CD, but it was giving me problems where I could not obtain the SUNWsndmr and SUNWsndmu packages.
I tried copying them from another Solaris server, but I could not get all of the files using .tar and .tar.gz once I extracted them. I tried installing sendmail.org's version of sendmail but I keep getting the following errors while running sh Build and ./makeinstall:
"# ./makesendmail
Configuration: pfx=, os=SunOS, rel=5.10, rbase=5, rroot=5.10, arch=sun4, sfx=, variant=optimized
Making in /admin/free_software/sendmail-8.12.10/obj.SunOS.5.10.sun4/sendmail
../devtools/bin/Build: make: not found"
It is urgent that I get sendmail to work. Please advise. Thanks. :)I copied some missing files from another server. I was able to complete the re-installation of sendmail. Unfortunately, I am back to square one.
I still cannot send mail to my host machine or to my Outlook. I am not getting any errors. Something is preventing mail messages from going out. When I enter, i get the correct syntax:
# mailx <USERNAME>@<HOST>
Subject:
<MESSAGE>CTRL D
EOT
But no mail has been received under /var/mail. Please help!!! Thanks. -
Configuring sendmail on Solaris 10 servers
I can send mail to myself within my server but I can get the server to succesfully send mail Out to other servers and to my Outlook email address. Please help. Thanks.
I copied some missing files from another server. I was able to complete the re-installation of sendmail. Unfortunately, I am back to square one.
I still cannot send mail to my host machine or to my Outlook. I am not getting any errors. Something is preventing mail messages from going out. When I enter, i get the correct syntax:
# mailx <USERNAME>@<HOST>
Subject:
<MESSAGE>CTRL D
EOT
But no mail has been received under /var/mail. Please help!!! Thanks. -
How to configure sendmail on 10.5.8 Mac OS X ?
Hi
I like to configure sendmail service to work for me in conjunction with XAMPP for web development.
I only want to configure for outgoing mail, and no incoming mail.
I get the following errors:
Jul 9 05:14:03 einstein postfix/pickup[28344]: 9393E63A1A6: uid=-2 from=<nobody>
Jul 9 05:14:03 einstein postfix/cleanup[28346]: 9393E63A1A6: message-id=<[email protected]>
Jul 9 05:14:03 einstein postfix/qmgr[28345]: 9393E63A1A6: from=<[email protected]>, size=712, nrcpt=1 (queue active)
Jul 9 05:14:03 einstein postfix/local[28356]: 9393E63A1A6: to=<[email protected]>, orig_to=<z>, relay=local, delay=0.03, delays=
0.01/0.01/0/0.01, dsn=5.1.1, status=bounced (unknown user: "z")
Jul 9 05:14:03 einstein postfix/cleanup[28346]: 9A17F63A1A8: message-id=<[email protected]>
Jul 9 05:14:03 einstein postfix/bounce[28357]: 9393E63A1A6: sender non-delivery notification: 9A17F63A1A8
Jul 9 05:14:03 einstein postfix/qmgr[28345]: 9A17F63A1A8: from=, size=2427, nrcpt=1 (queue active)
Jul 9 05:14:03 einstein postfix/qmgr[28345]: 9393E63A1A6: removed
Jul 9 05:14:03 einstein postfix/local[28356]: 9A17F63A1A8: to=<[email protected]>, relay=local, delay=0.06, delays=0/0/0/0.
05, dsn=2.0.0, status=sent (delivered to mailbox)
Jul 9 05:14:03 einstein postfix/local[28356]: warning: service not found: biff/udp
Jul 9 05:14:03 einstein postfix/qmgr[28345]: 9A17F63A1A8: removed
Jul 9 05:14:04 einstein postfix/smtp[28353]: 755FE63A1A4: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[74.125.127.27]:25, delay=3.3, delays=0.13/0.03/2.4/0.7, dsn=2.0.0, status=sent (250 2.0.0 OK 1278677644 l6si1998561wfa.144)
Jul 9 05:14:04 einstein postfix/qmgr[28345]: 755FE63A1A4: removed
Jul 9 05:14:31 einstein postfix/smtp[28348]: connect to example.com[192.0.32.10]: Operation timed out (port 25)
Jul 9 05:14:31 einstein postfix/smtp[28349]: connect to example.com[192.0.32.10]: Operation timed out (port 25)
Jul 9 05:14:31 einstein postfix/smtp[28348]: 4029B639F8D: to=<[email protected]>, relay=none, delay=2163, delays=2133/0.07/3
0/0, dsn=4.4.1, status=deferred (connect to example.com[192.0.32.10]: Operation timed out)
Are there simple steps to configure sendmail ?
Any help is appreciated.
Thank you
SincerelyI don't have any idea, since all that's used here is postfix. For development stuff, peruse or post to the developer forums under OS X Technologies or to the appropriate Server Products forum.
-
CONFIGURE NFS ON SOLARIS ZONES
I want steps to configure NFS on solaris Zones
Hi,
I installed unfs3 in zone, but can't mount unfs3 share from solaris client(Solaris 10 10/08 s10s_u6wos_07b SPARC):
root@prod-db $ mount -F nfs -o rw 192.168.219.13:/software /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error
nfs mount: retrying: /mnt
nfs mount: 192.168.219.13: : RPC: Rpcbind failure - RPC: Authentication error....
Any suggestions? I cant find in internet any forum or mailing list about unfs3 :( -
Some steps for configuring Network are skipped in installation Solaris 10
Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai -
Configure sendmail client on solaris 9
Hi,
I am facing problem in configuring sendmail client on solaris 9 .I was able to receive mail if I send mail to any indiviual email id but I was unable to send mail to alias group even after run new aliases .
Regards
KumarPlease post the error message and the sendmail logging so we can see what goes wrong.
-
How to configure sendmail to use multiple LDAP servers ?
Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer -
How to configure PPPoE in solaris 10
Hi
As I have to configure Internet in one Intel based Solaris box [Solaris 10] can you tell me the steps how to configure it as I have Brodband connection of Iqara.hi,
did you configure your interface for pppoe? the first step is configuring your interface for ppoe and then you can define a pppoe access server.
please look at http://docs.sun.com/app/docs/doc/816-4555/6maoquija?a=view for details.
yavuz -
Configuring IPSec in Solaris 9
Hello Friends,
I want to configure IPSec in solaris 9 so that a win2k/XP machine can communicate with that solaris m/c using IPSec. Could anybody help me regarding this. I have a basic idea of IPSec. I just want a step by step instructions for how to configure it. I have searched through google and found many docs which instructs how to configure IPSec between solaris only and also between windows only and I have succeeded to do so. But failed to configure it within solaris and windows.
Thanks and Regards
Dipta P Banerjeeyes, you can use oracle thin driver.
Your connection pool configuration is actually using datasource of oracle thin driver.
1) download oracle thin driver from oracle
2) .jar need to be kept in AS_INSTALL/domains/<domain-name>/lib/ext
3) restart AS
4) set all the necessary properties for Oracle thin driver - conn. pool (refer App Server Administration Guide > JDBC Resources > Config. for specific JDBC Drivers > Oracle thin type 4 driver
5) Ping conn. pool
If you are still getting the failure message, please post
1) exception got during ping, from domains/<domain-name>/logs/server.log
2) connection pool configuration
Thanks,
-Jagadish -
Steps to configure Information Rights Management in SharePoint 2013 On-Premise
Hi,
What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
Regards,2. PHases
1. you will have to configure a IRM server
2. You will have to integrate IRM iwth sp server.
Below article should explain all
http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx -
Steps to configure Planning Overview iView in MSS.
Need help with steps to configure/implement Planning Overview iView in MSS. I have done necessary configs in Define Attributes for planning overview in Customizing for ECM in R/3.
I have worked in ECM ECC 6.0 with employee based approval processes and now working on enh package4.
Thanks
PravHi Vivek,
Thanks for taking time and answering. So, how do I integrate the Org Chart iVIew with these Position Profile and Organizational Unit Profiles pages? We do not need all the iViews that come with these pages. We only need the following
Position Profile
- Employee Group/Subgroup
- Holders
-Organizational Unit Profiles
-Organizational Unit Search
-Position Holders
Thanks
Preet -
Steps to configure R/3 system to Portal implementation
Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
ThanksHello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022 SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022 SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022 SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022 SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022 SAP_R3_SelfServiceGenerics_MetaDataFIN
1. Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2. Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3. Choose the Maintain JCo Destinations button.
4. The available jCos are displayed with a red light, indicating that they are not yet maintained.
5. In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6. In Guided Procedure Section 1: General Data, make the following entries:
Field name User action and values Note
Name <jCo_Name> or <jCo_name>_Metadata Do not change the client number (for example, 100)
Maximal Pool Size <keep default value>
Maximum connections <keep default value>
Connection Timeout (msec.) <keep default value>
Maximum Waiting Time (msec.) <keep default value>
7. Choose Next.
8. In J2EE Cluster, make the following entries:
Field name User action and values Note
Use Local J2EE engine <SID> on <host> Selected Keep default values
9. Choose Next.
10. In Connection Type u2013 Data Type, make the following entries:
Field name User action and values Note
Data Type Dictionary Meta Data Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type Load-balanced Connection (recommended) For Dictionary Meta Data Connection, the value cannot be changed
11. Choose Next.
12. In Msg. Server Connection, make the following entries:
Field name User action and values Note
Message Server <select message server for your SAP ERP HR system> The values are taken from the technical system list of the SLD
Logon Group <select logon group for your SAP ERP HR system> The values are taken from the technical system list of the SLD
13. Choose Next.
14. In Security u2013 User Authentication, make the following entries:
Field name User action and values Note
Used Method <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name <enter connection user name> For example, rfcsysuser
Password/Confirm Password <enter a password>
Language English
SNC Mode Off For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15. Choose Next.
16. In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17. In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai -
Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.
Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4
Prashant,
Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
thank you
/michael
http://www.eclipselink.org -
Hello,
Need steps to configure speed dial.
Thanks
AbhishekHello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks
Maybe you are looking for
-
hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac
-
Iphone won't power on after screen replacement
So I've dropped my Iphone 4S once and screen showed blue vertical lines. I replaced the screen for about $120. After 6 months or so I dropped it again and the screen cracked. I decided to replace the screen on my own so I got a new one and replaced i
-
Cannot get long table on second page of Smartform
I want to create a Smartform with 2+ pages. The first page is a letter, and the second and subsequent pages contain a table which could be one or more pages long. If I put the letter in the main window of the first page, and the table in the main win
-
Why do my bullet points turn into numbers once the HTML is open in a browser?
I have some HTML code that I am using as the body of an email. It has bullet points throughout it but once I open or view it in an internet browser so that I can copy and paste it into the body of my email, the bullet points have all become ( 1. ). T
-
BEx 7.0 - Save EXCEL 2007 workbooks in .XLS - format
Hi there, I am currently creating some workbooks with BEx 7.0 . I am using Excel2007, so the workbooks are saved as .XLSM files. However, it should be possible to open them with an Excel 2003 installation as well, so I tried to safe the workbooks as