Steps to connect XI with other systems
Hi all,
What are the steps to be followed in general to connect a SAP system with a third party system using XI. It will be more helpful if I get information on the settings needed to be done on the 3 systems to get integrated (SAP,XI,Third party system).
I listed down the settings needed to be done in each of the system as far as I know. Correct/Update the list if you know more.
<u>SAP system:</u>
RFC destination from SAP --> XI
<u>XI system:</u>
WEB AS ABAP technical system in SLD
Third party system in SLD
Do we need a RFC destination from XI --> SAP?
Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system.
Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.
Your help will be appreciated
Regards,
Sakthi
Hi Sakti,
<b>SAP system:
RFC destination from SAP XI</b>
correct
<b>XI system:
WEB AS ABAP technical system in SLD
Third party system in SLD</b>
correct
<b>Do we need a RFC destination from XI  SAP?</b>
during installaltion the connection is done...
see here in details...
<b>SAP XI</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<b>SAP R/3</b>
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<b>In SLD System Landscape Directory</b>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
<b>Apart from the above, do we need to maintain any settings in XI(both ABAP and JAVA stack) and the ERP system</b>
No need!!
<b>Also, let me know what are the parameters(like host name,client) needed if a system is going to integrate with XI.</b>
during the creation of Business ssytem...give the same logical name !!!
regards
biplab
<b>**reward if it helps u!!!</b>
Similar Messages
-
Can DPM share a remote SQL Instance with other System Centre Products?
Firstly, apologies if this has been answered elsewhere but I can't seem to find a definitive line on it.
I am about to install and start implementing DPM 2012 R2 and have restricted access to SQL instances and the creation of. Can DPM share a SQL instance? Mainly can it share an instance shared with other System Centre products?
Does it really need a dedicated DB engine and Reporting services instance?Hi,
No, Each DPM server requires it's own dedicated instance name. You can have a single remote SQL server, but with seperate instances for each DPM server, or other System Center products.
Make sure that names of your instances does not contains an underscore in the instance name.
http://technet.microsoft.com/en-us/library/dn554221.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions. -
I have a PowerMac G5 using an Edimax EW-7811Un that is unable to communicate over Bonjour with other systems on our network. On occassion, I can see it appear on iChat on our Network but it doesn't receive any incoming traffic and will drop off soon after.
The PowerMac G5 does not see any other system over Bonjour.
Any help or solutions for getting my PowerMac G5 to be visible on our network would be greatly appreciated.
Thanks!
-PhilI do not understand why you are using Bonjour. You should be able to configure the g5 to use your router for network setup.
Do you have all of your devices using the same router? You should.
I'm assuming this is a small configuration with one router.
Robert -
Mac Pro will connect to internet but not network with other systems
I have an iMac in my studio reception and a Mac pro and Macbook in my office. All three systems can connect to the internet but the Mac Pro has stopped networking with the iMac. However the iMac can network with the Pro. I have an ethernet cable connection to the Pro (no wi fi card) and I have a wireless router on the iMac which has enabled me to connect the Pro to other systems through wi fi. I also have a PC laptop and the Pro can connect to it via wi fi. Everything was networking properly several weeks ago and as far as I am aware I have not changed any settings. Does anyone have any suggestions on how to resolve this annoying little problem.
Hello there, WoodenToy.
The following Knowledge Base article offers extensive troubleshooting steps for troubleshooting your issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Although the entire article is a great resource you may want to focus on the section entitled: "Symptom: My Mac does not connect to the Internet".
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Pixel Aspect CS4 is no compatible with other systems/softwares
If you make a video with a circle twisting around itself in CS4 in a comp like dvpal (PAR 1,09) and export to other system like smoke, flame, avid, final cut, When import, the video is ok, but if you want twist de video around itself (IN SOME OF THIS SYSTEMS) the circle deforms like an oval or an egg. This dont occur if you do the circle in previous after effects with PAR 1,07 because the settings match with the other systems (avid, etc). The same deformations occur whit if you make a circle in a still image. Make a circle in CS4 in DVPAL (1,09) and export like still image,import and rotate in other software (avid, finalcut, smoke, etc.), it look like an egg. So what happen with this? This new Pixel aspect is no compatible with the other softwares!. This is bad!!!What's the solution? Must wait for the correction in all the other softwares? I don't think so. Sorry my english. Thank's. Diego (Argentina)
Diego,
Can you post a screen shot of this error showing in a flame?
Please note that the presets in CS4 are just that; presets that you can easily change or ignore. If you're working with a system that dislikes the correct values; by all means use the old values when you're setting up and rendering your AE project.
The CS4 PAR values are technically correct, it's just that the industry have been ignoring the "blanking" in video for all these years.
- Jonas Hummelstrand
http://generalspecialist.com/ -
MS Project Online integration with other systems
Hi Everyone,
I am trying to build out an integration between MS Project Online and third party software. I want to sync the projects/tasks etc created in Project online to other system.
I tried using the trial version but could not get online version login etc. I have to download MS Project then start using it. Can some one guide me ?
Regards,
Pavan Patharde
PaviPavan,
Currently there is no public trial of Project Online available. You have to contact a Microsoft Partner to get a guided demo. See this:
http://blogs.office.com/2013/09/03/microsoft-project-online-partner-led-trial/
Also, Project Online is a web based project management system, and as such you cannot 'download' it. You could download a trial of MS Project like you did, but I am guessing that is not what you want.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
USB Connect issues with Infotainment system
iPhone 6+ with iOS 8.1.2
Standard Infotainment system in Subaru Outback 2015
When USB is connected to iPhone, tapping play on infotainment screen does nothing. If I tap play on iPhone, then music plays.
I have not reset phone (as I have read suggested in other forums).
Bluetooth connection seems to work ok.Hi, Pl4nt5NR4g5.
Thank you for visiting Apple Support Communities.
I understand that you are unable to control your iPhone via your car controls. I have experienced this issue myself and forcing all open applications, restarting your phone may resolve this issue. Make sure to try additional cables as well. If this issue persists, try the remaining troubleshooting steps in the second article below.
Force an app to close in iOS
http://support.apple.com/kb/ht5137
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
Cheers,
Jason H. -
iphone4 Bluetooth prob
From a technical stand point, the BlueTooth does allow transfer of any kind of file. However, this isn't always true. The device vendor has the option to turn off certain settings or, rather, restrict them. With that said, Apple has turned off iPhone to iPhone sharing directly via BT (BlueTooth). You can connect your headset or use a BT keyboard but you will not be able to transfer files directly from one phone to another. Is there an app that can do this? Sure, I believe Bump makes use of this. You could always find alternative apps as well.
-
Can no longer connect wirelessly with other computers
I have an iMac and a Macbook Air. For some reason I can no longer connect wirelessly between the two. They don't show up in Finder. Therefore I can't use "Remote Disk" on my Macbook Air to install programs.
Recently I switched from using an Airport router to a Cisco router. Could this be the problem? I can still connect to the internet through my wireless network, but can't find my computers.Hello,
All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
(Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg ).
If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
Hope this helps -
Connecting wirelessly with other computers including pcs in my home network
my home network is set up wirelessly through my linksys router with 2 pcs (vista) an ibook and an iMac. My pc recognizes the iMac but when I go to open the public folder it says "Windows cannot access...". When I run diagnostics, it says make sure you typed the path correctly (I have) and you have permission to access the shared folder (I think I do.) I have enable file sharing dvd sharing, screen sharing, file sharing, printer sharing and web sharing.
Welcome to the Apple Discussions!
You might look over the articles in Mac Help regarding Windows-based comps. Perhaps they would shed light on perhaps a misconfiguration in the networking.
Mac Help is in the Help menu of the Finder. Select the index (upper right) and go to W/Windows-based computers.
Dah•veed -
Connecting XI with other XI using SOAP adapter, is it possible?
Hi all,
I know that for connection between XIs is recommended using XI connectivity adapter. But I want to send/receive messages trough other XI outside of my network and Im thinking using SOAP adapter for effect. Is it possible?
Thanks in advance.
Cheers,
Ricardo.Yes, it is. But why? Both are SOAP messages based on HTTP.
Regards
Stefan -
Connecting Ipod with other Ipod, bluetooth
Do gamming applications such as monopoly permit ipod touches to connect through bluetooth?
You have to look at the description of the apps. Some peer-to-peer gaming apps use BT while some use wifi, some use either.
-
Steps needed or any guidance to connect SAP with DB2,
Hi Experts,
I need detailed steps to connect SAP with DB2 server. If any standard document or any one is having any docs / hints can provide , it would be a great help to me.Hello Mamata,
If your current ECC 6.0 is also on DB2/400, you can use DBCO - outlined in the following blog.
/people/sap.user72/blog/2006/08/31/configure-dbco-database-multiconnect-on-ibm-i5iseries
If the retail business can be moved to SAP solution, plain SAP RFC just works fine. If not, you can install a SAP gateway instance on DB2.
There are many options. It could be hard to identify the best choice without a detailed review/analysis.
Best regards,
Victor -
Integration with ERP and other systems
We have integrated iP Oracle with OEX and we are now trying to
integrate with BBP/SAP, Maconomy Procurement systems. Has anyone
tried to integrate OEX with other systems?We are now running a project to integrate OEX with SAP R/3 4.6c (MM Module). Oracle recommendation includes semiautomatic process associated to the RFQ in SAP and P.O. placement in SAP.
This semiautomatic process is consequence of poor XML integration with some transaction on OEX in which the buyer needs to operate in both systems: SAP and OEX. Nevertheless we are trying to request the incorporation of this changes in OEX's new version.
Its a matter of time that ORACLE will understand that a full integration is needed to satisfy users; SAP has done it and most of ERP transactions can be taken to XML format through their product Business Connector (Original a Webmethods product bought by SAP).
Juan Carlos Blesa -
Background: our desktop computer started shutting off sporadically. I researched the problem, reset the memory chip, checked battery voltage on the motherboard (it was okay), resinserted the battery and tried to boot. It started up successfully and connected to the internet via our DSL line. FF had trouble opening pages due to security certificates so I checked to see if upgrades were available (3.6.8 was) and I downloaded and installed it. After that it refused to work. Apparently a setting somewhere got changed but I don't know what it might be. The DSL connection works with other computers which are wireless (the desktop has a hard connection.) Operating system is Windows XP. Other browsers do not work.
Turn off your firewall and antivirus software.
Maybe you are looking for
-
To clarify - the new tab or window appears, and the web address is showing correctly in the address bar, but for some reason the new page won't load unless I manually highlight it and hit return. Please help!
-
We use Optio - A third party Output Management System for all Printing requirements Edited by: Anantha Papagiri on Jul 3, 2008 7:12 AM Edited by: Anantha Papagiri on Jul 3, 2008 7:12 AM
-
HT4623 There is nothing like Software update in my iPad.
There is nothing like Software update in my iPad.
-
Built in isight suddenly won't work
Yesterday when I got my macbook my isight worked fine and I took some goofy pics and it was fun. Very late in the day while trying to send some files from my PC to my macbook the camera stopped working. Now the green light stays on continually and an
-
how can i add netscape.jar to eclipse there is no archive file such that on linux version i have eclipse 3.3. and also i could not find where to download it. i wanna import netscape.javascript.* btw:) THX for YOUR REPLIES