Steps to correct transport that had missing info object

Experts,
I had tranpsorted Material Master data after enhancement and realized that I missed to add custom info object in transport (BW). This transport come with Error 8 in QA. Now, I have transported missing object to QA with new transport request. Mw trasport in R/3 and data source replication were good. Currently, Transfer structure and 0Material are inactive. I would like to know steps to correct my tranport best possible way. Can I do repair or reimport my first transport? Please advice. Thanks.
Regards,
NP

I will suggest to collect them again in a new request and transport.
Ravi Thothadri

Similar Messages

Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Hi All,
I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
I have IDES ECC6 with BI7.0.
Could someone please help me to retrieve those objects.
Thanks.

Hi Kishore,
Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
Please help. Thanks.

Do we transport 0LOGSYS (Source System) Info Object?

We are transporting the info objects first time to the quality. when we selected the necessarry objects for the required info objects in transport Organization it also picked 0LOGSYS info object.
My question is do we transport 0LOGSYS info Object?
And also it has created a Task number which is a type of repair (Yello color if you see in the main screen of SE09).
why it has created a repair task?
Can anybody please explain this?
Thanks
Sonu.

[Hello Sonu,|http://chandranonline.blogspot.com]
Yes, you can transport 0LOGSYS InfoObject.
If the current system is not the original system of the object, the object will be assigned to a task of the type repair.
Repair in Change & Transport System
The modifications of SAP standard objects.
Repository objects that are changed in a system other than their original system are entered in repairs. Objects can be transferred from their original system by transports.
For more info see this [Request Types and Task Types|http://help.sap.com/saphelp_nw04/helpdata/en/19/3f5bf8a4b011d285090000e8a57770/content.htm]
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

TS3276 I have an iMac and a Mac Book Pro. Downloaded Mountain Lion on to both. All seemed to be going well until I checked Mail. Could not send a message. Went thru all the steps to make sure that my ISP info was correct. Didnt work. Took to ISP and did n

I have an iMac and a Macbook Pro. Downloaded Mountain Lion. Could no longer send mail messages. Checked my Mail preferences and they were correct. Icalled my ISP and they tried to help make it work by setting some new preferences Did not work. Took Mac Book Pro into ISP to see if they could remedy the problem. They could not. Still cannot send messages. The only thing I did from when mail could send mail and when it could not was to download Mountain Lion on to both computers. Help!

Just realised that with the SSL checked in the smtp set up, password authorisation is required and is put in the box immediately under the SSL checkbox, which is under the port(s) being used. Can now send mail:)

IDVD won't open after trying to open a project that had missing links

I hope I can explain this correctly.
I created a DVD using iDVD last week, it had many short movies on it in different menus plus some photos in the menu areas. After I created the DVD & burned it, I moved the videos (plus a ton of other clips from the same year) to an external HD, as they were taking up tons of space on my hard drive.
Today I opened iDVD hoping to create a 2nd DVD project for a different year of clips. I had started to set up this DVD a few days back & saved it. When I clicked "open existing project", I found the projects but mistakenly clicked on the one that I had already burned. It acknowledged that it couldn't find the videos (since they're on an external HD that was not hooked up) and showed them all as broken links. Fine.
I tried to open the correct project, at which point iDVD froze & I had to force quit.
Since then, every time I try to open iDVD from Applications, I get a window asking where to look for the photos from the original one I opened, not the usual "create new project/open existing project" window. If I hit cancel in this window, everything disappears but the iDVD icon remains in the dock, but I can't open anything or do anything with it & have to force quit. If I try to do "find file", it just starts to search. Either way the whole program freezes up & I can't do anything with it.
Also, the iDVD menu will be at the top of the screen during this but I can't click to open anything else. As soon as I click elsewhere on the screen, the iDVD menu disappears, the icon is still on the dock, it won't do anything again & I have to force quit yet again(and get a message that iDVD quit while unresponsive).
I'm going to try shutting down & restarting but anyone know anything about this?
Thanks.

Try the following:
1 - delete the iDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iDVD/s cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch iDVD and try again.
OT

Missing Info Objects in Business Content

Hello,
the business content of our system has missing IO. For the Bank Analyzer there are missing 3 IO which are used for the cube etc.(IO are S20BPART,S21DFVAL, S40FTRAN).
For me is this problem new and I want to now if anybody has experience with this type of problem. On oss I could not find anything, so what could be the reason
Thanks
Henning

Hello Henning,
We had the same problem with BC 7.03. I guess it was support package 5. We had to open a customer message and got a corrected version which became part of the next support package.
Kind regards,
Stefan
PS: Of course it were different InfoObjects. In our case it was something related to Production Planning.

Modification of info object to correct the error in process chain.

Hi Gurus,
I'm facing some problem as mentioned below.
I'm loading data by using 5 info packages. Out of these 5 only one info package data has loaded properly the remaining 4 info packages are showing red status in process chain. Even though monitor status is green. When i checked the process chain it is showing error that duplicate data records.
I did analysis and i came to know that due to info object data type the info object Material number and Material group are showing same values. Now I need to correct the data type for those info objects. I've loaded these directly to info cube and to ODS object.
Now can anybody tell me the solution how do we go about to change the data type from Numc to Char. If we change how does it affect in cube as well as in ODS. How do we correct these type of errors when we are in Production system.
Thanks in advance....
Amarnath

hi Ravi,
Thanks for your help.
Thanks & regards,
Amarnath.
Message was edited by:
amarnath Reddy

Change length of Info object

Hello,
I have an infoobject with NUMC as data type and length 3. I need to change the length to 4 and keep the data type same. This infoobject is included in 6 or more ODS and cubes and is also a navigational attribute of another info object.
The infoobject already has MD loaded in it via a flat file. it can also be loaded directly through R/3, but the team has decided not to pursue that option.
My question is: Can I change the length to 4 without emptying the cubes and ODS? If so, how will it affect my MD? Is there any way to change the transactional data in the cube to 4 digits..by padding it with zero?
The only option that I see in front of me is to delete all the data in the infoobject. pad the data in the flat file so that it is 4 digits instead of 3 (I think I should be fine even if i don't do this). Delete all the ODS and cubes that contain this info object. Also delete all the data in the other info object that has this info object as a navigational attribute. Reload all the ODS and cubes and info object after the changes have been done.
Any other suggestions?
Thanks
Sam

Thanks Arun,
I reopened the post because the Q about the transport was related to the same post. I did not want to have 2 threads open for the same thing.
It does seem that when I transported it to BWQ, the tranfer structure was activated, but the infoobject has not been activated and gives me an error. It states that the tables need to be converted. So i guess I have to make the changes manually in QA.
Thanks
Sam

Increasing the length of Char type Info-object ( impact )?

Hi,
We are on BW3.5 version and we have a custom defined Info-object ZP_REPORT(say )whose length is 3 now as all the three digit series will be used up in near future we have a requirement to increase the length of the characteristic.
This Info-object is used Navigation attribute of 0Material. And also this info-object is used as Navigational characteristic in few Info-cubes.
Can any one please let me know what would be the impact of increasing the length?
1)Do I need to delete the master data from this ZP_REPORT?
2)DO I need to delete the master data from 0MATERIAL?
3)Will there be any impact on Info-Cubes?
Thanks in advance.
Regards
Ajay

Hi Ajay,
It is always big challenge to change the existing info object lengh or type or anything that have gone live already..........
But if we will be very careful at the time of changing length and transport, we can do it succefully......
Lets come to your scenario... In my understanding
i) Your scenario is going to change the info object length that info object is only available for attribute. It is not at all used anywhere in the dimenstion table. So your cube will not be affected.... If problem will come your master data only will be affected.... Verify more than one time your info object is not at all used in any cubes. (Go to infoobject change mode check in where used list)
ii) Before changing the length in development, data should be available in development cube as well as master data.. Because you can verify it in development itself whether the data will be deleted or not at the time of changing the length and activate the info object.
iii) At the time of transport transport only the particular info object. Dont sent any other info objects. That might have related with any cube.
iv) For safety purpose check whether your info cube is having which type of load. Either Full load or Delta. Most of the cubes will be having delta. If it is full, then we dont have more worry on that.
v) Finally if possible, create one backup cube and back master data and load data from your existing cube to that cube. If the data will be more that 2 GB it is not a simple task to take a backup..... This is only for safty purpose......
Please let me know your status...............
Best Regards,
Vivek

Bex Property of Info object doesn't work when Infoset is Used

Hi,
When I use Business partner info object ( example 0CRM_SALESP or 0BP_ACTIVIT etc) in a query build directly on a ODS(DSO) or infocube, the Bex setting "Query Def Filter Value Selection = Only Values in Info provider" defined in the 'Business Explorer" tab of the infoobject, works perfectly. This means that if the info object has 1 Million records in the master data table, but in the transaction data only 100 are involved, when you define a varialble restriction for the info object , in the selection screen the F4 will only show these 100 data as help.
Although this feature works fine when the query is directly developed ON THE INFO PROVIDER. However when I define a infoset on the same ODS and define a similar query, the F4 value shows all the data from the master data table instead of the ocurance in the transaction data( info provider)..
Is there any way , I can get over this issue.
Thanks
Arunava

Hi,
I guess, I couldn't ecplain the issue properly earlier.
What I am saying that even though I have the proper setting in the BEX tab ("Query Def Filter Value Selection = Only Values in Info provider") for the info object , It behaves differently if the query is defined directly on ODS then on the infoset which is built on top of the ODS.
When the query is build on the ODS the setting works fine
However when the query is defined on the Infoset, the F4 help get the value from the info object master data.
My question is , why this two different behaviour for the same info object? And how do I over conme this to get the same bahavious in info set as of the ODS.
Thanks
Arunava

Require relavant standard info objects

Dear experts,
PR Approval date
PR creation date
Transaction/event type, purchase order history,
PO Planned Delivery Date
Invoice Creation date
Invoice Clearing date
PO Issue date
Require to know any standard business content infoobjects available for the above fields?
If useful points would be assigned.
With Regards,
Meiyappan
Edited by: MEIYAPPAN SUNDARAM on Jul 7, 2008 3:04 PM

Hi,,
Copy your descriptions of ur Posted Info Objects to a file and hence import that to the Info object list in RSDIOBJ table,
Hence forth u vll get the field name as well as the Info Object Name
FRGDT- 0FRE_RELDT
BADAT0- 0DF_REQ_DAT
LFDAT-0SHIP_DATE
CPUDT-0CREATEDON
AUGDT-0CLEAR_DATE
Hope this will help you
Thanks
Raju

Where we can set the Multi lingual support in BW system and Info Object?

Where we can set the Multi lingual support in BW system and Info Object?

Hi,
You can check that in RSD1 -> Info-object -> Master Data text tab -> language dependent or not.
Bye
Dinesh

Can I have iTunes find my missing info for my songs and albums that are already on my computer?

I have missing info on a lot of my songs and the albums I had put them on by CD awhile ago without internet and I cant redo them because I dont have the CDs anymore. Can I have iTunes find the info for them?

Google "TuneUp" it should be the first result. TuneUp is a paid application though, there's another application called MusicBraiz which is free, but this one is a little complicated I think. Hope that helps

Macbook X 10.6.8. Epson SX218 failed to print every fifth line, but only in MS Office documents. I updated Office. Now that line is slightly blurred as though the printer had missed out a pass.

I am helping a disabled person with a printing problem involving a Macbook, an Epson SX218, and MS Office for Macs. The Macbook had been recently updated to OS X 10.6.8, and the printer driver reinstalled, by an Apple store. She complained the printer failed to print about every fifth line. It turned out there was no problem at all with printing web pages and emails, but only with Office (Word, Excel, Powerpoint). I updated
Office. Later all lines were printed, but imperfectly with a bit missing from bottom of every fifth line, as though the printer had missed out a pass, so I am not sure the Office update is what made the difference. I am not at all sure whether this problem arises from the Mac or the printer or Office.

It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Steps to correct transport that had missing info object

Similar Messages

Maybe you are looking for