Steps to create a scalable signature in PS CS5?

Hi,
I have scanned a signature and would like it to scale without pixilation. What steps do I execute to convert the image to the appropriate format (raster? vector?)?
Many thanks!
Michael

Heh, this same question was asked just a few days ago...
You probably want to create a path that represents the signature.
See this thread. There's another; I'll try to find it as well...
http://forums.adobe.com/message/3618925#3618925
-Noel
Edit: Here's the other thread, though the first image seems to have gone missing.
http://forums.adobe.com/thread/842318?tstart=90

Similar Messages

How do I create a digital signature on a TCP or a UDP flow?

I am trying to convert samples of a voice signal, which is intercepted from the microphone, into fixed length digital signature bytes (using Hash, or) and attach these fixed length bytes to a communication session between two terminals (UDP or TCP "HTTP"). The other receving end should be able to identify the person at the sending side.
Any thoughts how I could do this?
Any help is most appreciated.
Sam

Sam,
If you have the Sound and Vibration toolkit it may make some things easier for you regarding the voice-recording aspect, but if you aren't recording and playing back the actual sounds, just using this for detection and digital signatures, you shouldn't need to worry about this.
1. For this you are going to be doing some form of Analog Input. Then you will be storing this data to a file. There are examples for both of these aspects in the NI Example Finder from within LabVIEW.
2. If you are going to be doing the FFT, there is a VI under the Mathematics Palette that performs this operation. Again you can use the same example for saving data to the file.
3. You would need to figure out what needs to be done to create a digital signature for this. There may be something in the Sound and Vibration toolkit for this, but I do not know.
4. For the UDP or TCP transfers, there are several examples for doing this and they cover how to create the connection and transfer / receive data. These too are in the NI Example Finder
5. This goes back to number 4, this would indeed be a separate program, but everything else would just be one project and one program.
6. This would depend on how the ID was created in step 3, again whether you do the algorithm on yourself or not. For comparing to the table, you would use a Search Array and some comparison functions, all depending on how you stored the data initially.
7. Graphs are all available on your Front Panel of your VIs and you would just wire up the data that you'd like and have it displayed on the graph.
There will not be an example for everything that you are wanting to do. The examples are meant to help you get started. Have you used LabVIEW before? I would recommend doing the 3 Hour LabVIEW Introduction Course to help you get started. This will cover some of the basic concepts that you will need to know in order to create your application.
Unfortunately I cannot write the code for you, only guide and direct you. LabVIEW is a programming language and does require the user to lay out and create their own program. You will not be able to just find three or four pre-built code-snippets and connect them together to get your appliction working the way you want it. You will need to develop the applications yourself.
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

Problems creating a transparent signature.

Hi,
I am trying to create a transparent signature, but whenever I complete the steps in this forum below the signature is fuzzy. I've also attached an example showing the problem.
Thanks for the help!
http://blogs.adobe.com/acrolaw/2007/02/creating_a_tran_1/

The image is probably using JPEG compression as a result of getting converted to PDF, but you can control this through a preference setting: Edit > Preferences > Convert to PDF > TIFF (or PNG) > Edit Settings > Grayscale (or Color) > ZIP (or higher quality JPEG/2000)

Problems Creating the Digital Signature

Hello,
I'm using php 5.2.4-3, apache 2.2.8-1 on Fedora 8 and I'm trying to test out my authorization to iTunes U but I'm having difficulty creating the digital signature.
Does anyone know of any PHP implementation/script that I can use to create the digital signature?
And I don't quite understand the 3rd step "Convert the HMAC-SHA256 output value into a 64-character hexadecimal representation". Does this mean chopping off the right most characters till it's 64 characters?
Thanks for any assistance.

Hi, Could you please post the php file you've found? I'd really appreciate it. Thank you.

Steps to create LOGICAL DATABASE in sap

hi guys,
i have gone through many documents about LDB. But, i didnt get the steps to create a LDB.
plz provide me with the steps to be followed to create a LDB.
thnx,
shivaa.

Hi Shiva,
This might help you!
Logical database structures
There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
Creating your own logical database
ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
1. Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
2. Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
3. Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
4. Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
Watch out!
The use of very large tables will degrade the performance of a logical database, so be aware of that trade-off. Remember that some tables in SAP are very complex, so they will be problematic in any user-defined logical database.
Declaring a logical database
Hereu2019s another surprising feature of logical databases: You do not assign them in your ABAP/4 Code. Instead, the system requires that you specify logical databases as attributes. So when you are creating a report, have your logical database identifier (the name you gave it) on hand when you are defining its attributes on the Program Attributes screen. The Attributes section of the screen (the lower half) will include a Logical database field, where you can declare your logical database.
Logical databases for increasing efficiency
Why else would you want to create a logical database? Consider that the logical databases already available to you begin with a root node and proceed downward from there. If the data object you wish to construct consists of items that are all below the root node, you can use an existing logical database program to extract the data, then trim away what you donu2019t want using SELECT statementsu2014or you can increase the speed of the logical database program considerably by redefining the logical database for your object and starting with a table down in the chain. Either way, youu2019ll eliminate a great deal of overhead.
Reward if useful.
Thankyou,
Regards.

How do I create an email signature for .me email account

Hi, I would like to creat an email signature that will work for my .me account on the iCloud. I know how to do it on my iPhone. Does the iCloud automatically inherit that signature or do you have to do it on the web. I want the signature to work when creating and reading emails on the web UI for iCould.
- Dave O.

log into www.icloud.com , launch the Mail web-app and see its settings ( upper right corner, tools icon ). There are settings that let you create alias,rules,signature and more.

It seems cranky sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any help

Not in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer.

How to create a digital signature in adobe reader

how to create a digital signature in adobe reader?

Adobe Reader Touch (Windows Store app with "modern" UI) does not support any types of signatures yet.
Digital Signatures with certificates
Electronic Signatures (that are legally enforceable)
Signature annotations (hand-writing annotations which may not be secure and legally enforceable)
Adobe Reader XI (traditional desktop app with classic UI) supports #1 and #3.
Adobe EchoSign supports #2.
Adobe Reader for iOS/Android supports #3.

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

URGENT:Diagnose The Steps for Creating a Standby Database

Why Following Steps Can Not Succeed? What are the problems?
The Steps of Creating a Physical Standby Database
SQL>alter system set db_recovery_file_dest_size=2000m scope=both;
SQL>alter system set db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area' scope=both;
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog;
SQL>alter system set db_flashback_retention_target=120 scope=both;
SQL> alter database flashback on;
SQL> alter database force logging;
#The Primary Database Pfile after being edited
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orcl10XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/orcl10/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl10
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\orcl10\control01.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control02.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_NAME=orcl10
DB_UNIQUE_NAME=orcl10
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/orcl10/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_2=
'SERVICE=stdby4 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=stdby4
FAL_CLIENT=orcl10
DB_FILE_NAME_CONVERT='stdby4','orcl10'
LOG_FILE_NAME_CONVERT=
'/arch1/stdby4/','/arch1/orcl10/','/arch2/stdby4/','/arch2/orcl10/'
STANDBY_FILE_MANAGEMENT=AUTO
SQL> create spfile from pfile;
RMAN> connect target
RMAN> backup database;
###TheBackupHandle==C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL10\BACKUPSET\2007_11_06\O1_MF_NCSNF_TAG20071106T064915_3LZ7LRN8_.BKP
RMAN> backup datafile1,2,3,4,5;
C:\DocumentsandSettings\Administrator>mkdir C:\ORACLE\PRODUCT\10.2.0\ORADATA\temp\stdby4
SQL> alter database create standby controlfile as '/temp/stdby4.ctl';
SQL> create pfile='/temp/initstdby4.ora' from spfile;
#Pfile Edited for The Physical Standby Database
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=stdby4XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/stdby4/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl9
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\stdby4\control01.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control02.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/stdby4/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_UNIQUE_NAME=stdby4
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
DB_FILE_NAME_CONVERT='orcl10','stdby4'
LOG_FILE_NAME_CONVERT=
'/arch1/orcl10/','/arch1/stdby4/','/arch2/orcl10/','/arch2/stdby4/'
LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/stdby4/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_2=
'SERVICE=orcl10 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=orcl10
FAL_CLIENT=stdby4
C:\Documents and Settings\Administrator>oradim -new -sid stdby4 -startmode manual
Create Listener and Network Service Name for Standby Database.Stop and start listener(not need)
SQL>create spfile from pfile='/temp/initstdby4.ora';
C:\Documents and Settings\Administrator>set oracle_sid=stdby4
SQL> startup mount;
ORA-01078: failure in processing system parameters
LRM-00109: ???????????????? 'C:\ORACLE\PRODUCT\10.2.0\DB_10\DATABASE\INITSTDBY4.ORA'
Message was edited by:
frank.qian
Message was edited by:
frank.qian

you have now two different pfiles: one in c:\temp\initstdby4.ora. and %ORACLE_HOME%\database\initstdby4.ora.
You are using the latter, as you didn't specify pfile= in your startup mount.
Also, if you are using a spfile, the only line in a pfile should be: spfile=....
In your pfile you are mixing up Unix like file locations with \ and Windows file locations with /
Could you please read the docs
more closely
more closely
more closely
and work
more carefully
more carefully
more carefully
It is very simple, but you must work carefully.
Sybrand Bakker
Senior Oracle DBA

Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users

Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
Frank

Dear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat

Steps to Create Project in Solman using ASAP methology

Let me know steps to create new project in SOLMAN using ASAP road map.

Hi Gajanan,
Kindly read the below pdf
https://websmp204.sap-ag.de/~sapidb/011000358700000916032011E
Also the below one which provides more details
https://websmp204.sap-ag.de/~sapidb/011000358700000414462011E
https://websmp204.sap-ag.de/~sapidb/011000358700000414522011E
Also, roadmap needs to be assigned in solar_project_admin where you create your project as per above documents with proper flavor as shown below.
Thanks
Prakhar

Steps to create variant configuation dependencies code

Hello Guru's,
steps to create variant configuration dependency using code?. will anyone guide me.

Check the below links.
Variant Configuration (LO-VC)
[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf]
Variant Configuration for an Order BOM
[http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm|http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm]
[www.sapmmforum.blogspot.com/2007/10/variant-configuration-for-order-bom.html |www.sapmmforum.blogspot.com/2007/10/variant-configuration-for-order-bom.html ]
Steps for SD Variant Configuration
[www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm|www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm]
Steps for Variant Configuration & Pricing
[www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm|www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm]
[www.sapsdforum.blogspot.com/2007/10/steps-for-variant-configuration-and.html |www.sapsdforum.blogspot.com/2007/10/steps-for-variant-configuration-and.html ]
Hope this helps. Reward points if helpful.
Thanks,
Balaji

Steps to create service in SICF transaction

hi..
steps to create service in SICF transaction
thank you.

hi
good
go through this link
http://help.sap.com/saphelp_nw70/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm
thanks
mrutyun^
null

Steps to create f4 help for a table

steps to create f4 help for a table

These are the steps you have to take first:
1. Please elaborate, your question does not all too clear.
2. Search on SCN.
3. Search on help.sap.com (for creating F4 search help).
I guess you get the picture. Creating an F4 help is quite easy (you can find that on SCN for sure), but what do you mean by
for a table
1.Do you want to create a field which has an F4 help for searching tables or
2. is this field part of a table and you need to have a search help for that field of that table in order to select some sort of value
3. Is this a custom table.
4. Is this a custom field for which F4 help should be added.
5. Won't a domain value do.
6. etc.

Steps to create a scalable signature in PS CS5?

Similar Messages

Maybe you are looking for