Steps to create LOV.

Hi All,
Crystal Version 10.
Can someone please help me write the steps to create a LOV? I do not exactly know what is LOV, I have a requirement that is the report should prompt me for the parameters. Now that I only know it is possible using LOV, I do not have access to our BO Server. I need to send them (guys who deploy the reports on the server) the exact steps to do that. Please co-operate and write steps for me.
Thanks
-Azhar

I think you cannot create dynamic LOVs in Crystal 10. It is possible in Crystal XI and latter versions. You can add the database values to the parameter but if any changes done in the database will be updated by manually inserting the database values. Click on default values and select the database field and add all the values from database to default values to show the list while selecting the parameter values. This list will be static and need to re import all the database values again if any changes done in the database. For more details please go through the following SAP note
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Regards,
Raghavendra

Similar Messages

Steps to create LOV dynamically

Hello All,
I want to create LOV dynamically.in my Oracle Forms 6I
Is there any code which can create LOV dynamically using coding.
I can create Record group dynamically. but I want to create LOV dynamically not from object browser of Form Builder by pressing Add LOV option.
Kindly help me.
Thanks
HARSH SHAH

Forms does not have a Built-in for dynamically creating an LOV; these objects can only be created in the Forms Builder during design time. You can, as numerous people have tried to demonstrate, change the Record Group an LOV uses dynamically. Unless you are changing the Column Mapping Properties of the LOV, using different Record Groups to supply the data for an LOV should work for you. If you need to change the Column Mapping Properties, then you will need to create multiple LOV objects with the different mapping you need and then assign the LOV to your Item dynamically.
Hope this helps,
Craig...

Steps to create LOV-form not correct

Hi,
In order tot create an LOV-form we follow the steps from the Headstart 6.5 user guide (we are using Designer 9i).
We come to the conclusion that these steps are not complete/correct for Designer 9i.
First the keys f7 and f8 are not available with qmsso$modal_dialog_window, so we use our own template object which is basically the same but set to document window.
Second the code to invoke the LOV is not generated so we have to manually add this code in Designer.
Can anyone confirm out findings on this matter?
Kind regards,
Pascal

Forms does not have a Built-in for dynamically creating an LOV; these objects can only be created in the Forms Builder during design time. You can, as numerous people have tried to demonstrate, change the Record Group an LOV uses dynamically. Unless you are changing the Column Mapping Properties of the LOV, using different Record Groups to supply the data for an LOV should work for you. If you need to change the Column Mapping Properties, then you will need to create multiple LOV objects with the different mapping you need and then assign the LOV to your Item dynamically.
Hope this helps,
Craig...

Creating LOV in Forms Personalization

Hi Friends,
I have the requirement to create LOV for the 'Description' field in Standard Form. That Description field doesn't have LOV. I want to create LOV for that field thru Forms personalisation. Is it possible. Pl. tell me the steps.
I'm using 11.5.10.2.
Thanks
Kavitha

You cannot use Forms Personalization to create a new LOV (you can use Forms Personalization to change what the form run). This is already explained in (Limitations of Forms Personalization [ID 420518.1], Point #1).
To create a new LOV, you will have to customize the form (pay attention to Oracle policy about customizing seeded forms/report) -- See the docs below for details.
Customization in Oracle Applications [ID 743490.1]
Sample CUSTOM Library Code To Customize Applications [ID 744065.1]
Oracle Forms in Applications FAQ [ID 177610.1]
How To Customize Standard Oracle Application Using Custom Library [ID 438920.1]
Oracle Application Developer Guide
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Create lov at run time in oracle form 10g

i want to create a lov and record group dynamically at run time..
i have the code in when-form-instance..
Declare
v_lov lov;
rg_id recordgroup;
gc_id groupcolumn;
tem_num number;
v_rg_id number;
begin
rg_id := find_group('My group');
if id_null(rg_id) then
rg_id := Create_group('My_group');
gc_id := add_group_column(rg_id,'emp_id',number_column);
gc_id := add_group_column(rg_id,'ename',char_column,15);
end if;
v_rg_id := POPULATE_GROUP_WITH_QUERY('My_group','select t.employee_id,t.first_name from employee_mt t where t.employee_id in (103,104,106)');
--tem_num :=populate_group(rg_id);
v_lov := find_lov ('LOV_NAME');
set_lov_property(v_lov,group_name,'My_group');
set_item_property('VEH_SEARCH.TXT_VEH_CODE',lov_name,'lov');
End;
now i have problem...whether i create first a lov and record group at design time or not????
if i create a lov and have the recordgroup column then what is the benefit of dynamically lov...???
thanks

Hi.
It is possible with some restrictions. Let's say you agree there are max 5 columns in your LOV-s. That way you can easily create LOV to RG colums mapping (what Andreas pointed out).
For example :
1. in design time create RG with dummy columns (for example : c1, c2, c3, c4, c5)
2. in design time create 1 LOV with 5 predefind columns (for example : c1, c2, c3, c4, c5)
3. populate that record group with select (selecting 5 columns. If you do not have 5 columns in your table on which LOV is based just select dummy columns for the rest of the columns) aliasing them as c1, c2, c3, c4, c5 (same as in LOV from step 2)
4. asign that RG to the LOV in step 1
5. in LOV show just "non-dummy" rows form step 3
The rest you already figured it out.
The benefit of this approach is questionable as the same can be done creating more RG and LOV-s in design time. So I believe this is the matter of developer preferences. By the way the concept I described we use on daily bases dealing with LOV-s.
Best regards.

Will possible to create lov,recordgroup on runtime?

Hi all,
Is it possible to create lov,recordgroup on runtime. If so, please explain step.
Kanihs

Documentation:
Record Group Type Property
Description
+Specifies the type of record group, either Static or Query: Static Specifies that the record group is constructed of explicitly defined column names and column values.
The values of a static record group are specified at design time and cannot be changed at runtime.
Query Specifies that the record group is associated with a SELECT statement, and thus can be populated dynamically at runtime.
When you select this option, enter the SELECT statement in the multi-line field provided, then choose Apply.+
Francois

Steps to create LOGICAL DATABASE in sap

hi guys,
i have gone through many documents about LDB. But, i didnt get the steps to create a LDB.
plz provide me with the steps to be followed to create a LDB.
thnx,
shivaa.

Hi Shiva,
This might help you!
Logical database structures
There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
Creating your own logical database
ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
1. Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
2. Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
3. Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
4. Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
Watch out!
The use of very large tables will degrade the performance of a logical database, so be aware of that trade-off. Remember that some tables in SAP are very complex, so they will be problematic in any user-defined logical database.
Declaring a logical database
Hereu2019s another surprising feature of logical databases: You do not assign them in your ABAP/4 Code. Instead, the system requires that you specify logical databases as attributes. So when you are creating a report, have your logical database identifier (the name you gave it) on hand when you are defining its attributes on the Program Attributes screen. The Attributes section of the screen (the lower half) will include a Logical database field, where you can declare your logical database.
Logical databases for increasing efficiency
Why else would you want to create a logical database? Consider that the logical databases already available to you begin with a root node and proceed downward from there. If the data object you wish to construct consists of items that are all below the root node, you can use an existing logical database program to extract the data, then trim away what you donu2019t want using SELECT statementsu2014or you can increase the speed of the logical database program considerably by redefining the logical database for your object and starting with a table down in the chain. Either way, youu2019ll eliminate a great deal of overhead.
Reward if useful.
Thankyou,
Regards.

Create LOV's for all columns at the time of folder creation

Hi,
I know we can automatically create the LOV's for all the columns of a database table when creating the folder in the EUL. Is this a good practice or should I create LOV's on demand? What is the disadvantage of creating more LOV's than needs to be used other than the disk storage? I also know it is not a good idea to have an LOV on a field that has a lot of values. I am tempted not to create the LOV's in the beginning, but then it becomes a high maintenance issue if I have to come back and create many LOV's later. Thank you for your input.

Yes, it is not a good idea to create LOVs for all the columns. LOVS should be created only for the columns where parameters will be used. More the number of LOVs, slower the response in opening up your Discoverer reports and if you are using Disco Viewer, the page might take a long time to open up and frustrate the users.
Also it is a good practise to have LOVs defined on the lookup tables or where there are distinct values in the table and not from where these values are used in the table.
regards
http://www.infocaptor.com <--- Free Discoverer Monitoring Dashboards

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

URGENT:Diagnose The Steps for Creating a Standby Database

Why Following Steps Can Not Succeed? What are the problems?
The Steps of Creating a Physical Standby Database
SQL>alter system set db_recovery_file_dest_size=2000m scope=both;
SQL>alter system set db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area' scope=both;
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog;
SQL>alter system set db_flashback_retention_target=120 scope=both;
SQL> alter database flashback on;
SQL> alter database force logging;
#The Primary Database Pfile after being edited
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orcl10XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/orcl10/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl10
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\orcl10\control01.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control02.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_NAME=orcl10
DB_UNIQUE_NAME=orcl10
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/orcl10/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_2=
'SERVICE=stdby4 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=stdby4
FAL_CLIENT=orcl10
DB_FILE_NAME_CONVERT='stdby4','orcl10'
LOG_FILE_NAME_CONVERT=
'/arch1/stdby4/','/arch1/orcl10/','/arch2/stdby4/','/arch2/orcl10/'
STANDBY_FILE_MANAGEMENT=AUTO
SQL> create spfile from pfile;
RMAN> connect target
RMAN> backup database;
###TheBackupHandle==C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL10\BACKUPSET\2007_11_06\O1_MF_NCSNF_TAG20071106T064915_3LZ7LRN8_.BKP
RMAN> backup datafile1,2,3,4,5;
C:\DocumentsandSettings\Administrator>mkdir C:\ORACLE\PRODUCT\10.2.0\ORADATA\temp\stdby4
SQL> alter database create standby controlfile as '/temp/stdby4.ctl';
SQL> create pfile='/temp/initstdby4.ora' from spfile;
#Pfile Edited for The Physical Standby Database
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=stdby4XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/stdby4/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl9
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\stdby4\control01.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control02.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/stdby4/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_UNIQUE_NAME=stdby4
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
DB_FILE_NAME_CONVERT='orcl10','stdby4'
LOG_FILE_NAME_CONVERT=
'/arch1/orcl10/','/arch1/stdby4/','/arch2/orcl10/','/arch2/stdby4/'
LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/stdby4/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_2=
'SERVICE=orcl10 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=orcl10
FAL_CLIENT=stdby4
C:\Documents and Settings\Administrator>oradim -new -sid stdby4 -startmode manual
Create Listener and Network Service Name for Standby Database.Stop and start listener(not need)
SQL>create spfile from pfile='/temp/initstdby4.ora';
C:\Documents and Settings\Administrator>set oracle_sid=stdby4
SQL> startup mount;
ORA-01078: failure in processing system parameters
LRM-00109: ???????????????? 'C:\ORACLE\PRODUCT\10.2.0\DB_10\DATABASE\INITSTDBY4.ORA'
Message was edited by:
frank.qian
Message was edited by:
frank.qian

you have now two different pfiles: one in c:\temp\initstdby4.ora. and %ORACLE_HOME%\database\initstdby4.ora.
You are using the latter, as you didn't specify pfile= in your startup mount.
Also, if you are using a spfile, the only line in a pfile should be: spfile=....
In your pfile you are mixing up Unix like file locations with \ and Windows file locations with /
Could you please read the docs
more closely
more closely
more closely
and work
more carefully
more carefully
more carefully
It is very simple, but you must work carefully.
Sybrand Bakker
Senior Oracle DBA

Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users

Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
Frank

Dear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat

Steps to Create Project in Solman using ASAP methology

Let me know steps to create new project in SOLMAN using ASAP road map.

Hi Gajanan,
Kindly read the below pdf
https://websmp204.sap-ag.de/~sapidb/011000358700000916032011E
Also the below one which provides more details
https://websmp204.sap-ag.de/~sapidb/011000358700000414462011E
https://websmp204.sap-ag.de/~sapidb/011000358700000414522011E
Also, roadmap needs to be assigned in solar_project_admin where you create your project as per above documents with proper flavor as shown below.
Thanks
Prakhar

Steps to create variant configuation dependencies code

Hello Guru's,
steps to create variant configuration dependency using code?. will anyone guide me.

Check the below links.
Variant Configuration (LO-VC)
[http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf]
Variant Configuration for an Order BOM
[http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm|http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm]
[www.sapmmforum.blogspot.com/2007/10/variant-configuration-for-order-bom.html |www.sapmmforum.blogspot.com/2007/10/variant-configuration-for-order-bom.html ]
Steps for SD Variant Configuration
[www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm|www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm]
Steps for Variant Configuration & Pricing
[www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm|www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm]
[www.sapsdforum.blogspot.com/2007/10/steps-for-variant-configuration-and.html |www.sapsdforum.blogspot.com/2007/10/steps-for-variant-configuration-and.html ]
Hope this helps. Reward points if helpful.
Thanks,
Balaji

Steps to create service in SICF transaction

hi..
steps to create service in SICF transaction
thank you.

hi
good
go through this link
http://help.sap.com/saphelp_nw70/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm
thanks
mrutyun^
null

Steps to create f4 help for a table

steps to create f4 help for a table

These are the steps you have to take first:
1. Please elaborate, your question does not all too clear.
2. Search on SCN.
3. Search on help.sap.com (for creating F4 search help).
I guess you get the picture. Creating an F4 help is quite easy (you can find that on SCN for sure), but what do you mean by
for a table
1.Do you want to create a field which has an F4 help for searching tables or
2. is this field part of a table and you need to have a search help for that field of that table in order to select some sort of value
3. Is this a custom table.
4. Is this a custom field for which F4 help should be added.
5. Won't a domain value do.
6. etc.

Steps to create LOV.

Similar Messages

Maybe you are looking for