Steps to create Numer range buffering
Hi Gurus,
Can any b'dy explain the concept of number range buffering and also i need steps to create number range buffering for transactional data.
here we have a full load it has to load 50L of records daily . it is taking 1.5 hr to 2 hr to load this data into an info cube we are looking to improve this load performence.
thanks in advancde to all gurus.
lax
hi,
Welcome to SDN...
basically number range buffering is used to increase performance. usualy SID number range buffered,
transaction rsrv can be used to check -> all elementary tests >> master data >> compare number range and max sid. and >> transcation data >> comparison of rumber range and max dimid.
transaction SNRO is used to maintain number range.
http://help.sap.com/saphelp_nw04/helpdata/en/7b/6eb2aa7aed44ea92ebb969e03081fb/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/95/3d5540b8cdcd01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/aa/dbc9b4b56143bb8f2ae909d7d040fa/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/71efb490-0201-0010-949b-b2344b58b094
Number Range Buffering can help cube loads if you your loads result in a good number of new Dim IDs being created with the load.
Without buffering, each row of data to be loaded that would require a new Dim ID to be assigned (because it is new combination of characteristics for that dimension) must go out and read the Number Range table for that specific Dimension and get the next available number. So if you add 50,000 rows to a cube that results in 5,000 new Dim IDs to be assigned, that means 5,000 queries that must go read the table. Now if you buffered 500 numbers at a time, that would mean only 10 queries to the number range table.
In a perfect BW world, someone in your shop would have the ability to go to your P system and make the change. Chances are, this ability is locked down and you will have to get the P opened to make the change.
This can also make a big improvement in the load time if you are doing a large initial load of millions of rows to a cube.
FOR MORE DETAILS http://www.sap-img.com/ge003.htm
Re: SMS through SAP
pls assign points if useful..
-Shreya
Similar Messages
-
I have to create a number range for OM ids . OM ids will be assigned to organistion units . OM ids will be unique and cannot be assigned to more then one org units . Please tell me the steps to create Number range which should start with 10000 till 99999.
Waiting for reply.Thanks Guys
I had already done what 'Jatra Riwayanto ' suggested now . It is better if before getting the next number via FM 'NUMBER_GET_NEXT' we should lock the number range object using FM 'NUMBER_RANGE_ENQUEUE' and after getting the number unlocks the number range ob ject using FM 'NUMBER_RANGE_DEQUEUE' .
<b>Sample code</b>
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
EXPORTING
object = 'ZPOMID'
EXCEPTIONS
foreign_lock = 1
object_not_found = 2
system_failure = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZPOMID'
IMPORTING
number = NEXT_NUMBER
quantity = quant
returncode = code
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
EXPORTING
object = 'ZPOMID'
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
ENDIF.
Thanks Buddies , full points awarded. -
Steps to create a Number Range.
Can anyone please send me the steps to create a Number Range..Thanks in Advance
Hi,
1) Goto Tcode SNRO
2) select ur concerned OBJECT there.
3) Click on Number Ranges Push Button.
4) then click on Display Interval Button over there.
*****************************************************Other code
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
quant LIKE inri-quantity, "dummy
code LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
foreign_lock = 1
object_not_found = 2
system_failure = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZRECAUDIT'
IMPORTING
number = last_id
quantity = quant
returncode = code
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
ENDIF.
ENDFORM. " get_next_id
Don't forget to reward if useful.. -
Number range buffering - how to activate
Hi All,
We have system performance issues relating to various locks on NRIV and
therefore decided to buffer object RV_BELEG using the Loc File + Proc
ID setting it to 1,000 numbers.
In short does anyone know all the exact steps to follow to activate number range buffering? I don't find clear notes or direction from SAP how to do it.
More detail / what we did:
I proceded to set the buffer using SNUM -> entering the object RV_BELEG -> change -> edit -> set buffering.
We did this in the Production environment while the servers were still running. When we tried to save a sales order to see if everything is still working we received a ABAP runtime error with the following Error analysis
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_RANGE_OUT_OF_BOUNDS',
was neither caught nor passed along using a RAISING clause, in the procedure
"NUMBER_GET_NEXT" "(FUNCTION)"
Do we need to restart the application servers once the buffering is set
to take affect?
Do we need to do anything else besides setting buffering on the Object?
any help will be appreciated,
thanks
Jacohi,
I think it'll not get deleted from MMNR...
I think you need to delete it from SPRO --> logistics general --> Matrl master --> Basic settings --> Material types --> Assign material types to special create transaction....
Pls make it confirm before deleting anything...
Hope it helps..
Regards
Priyanka.P -
Hi,
What is Number Range Buffering in BW
Is it applied on an infoobject or on a dimension of an infocube
How to SID/DIM buffering for dimension table on an info cube in SNRO
ThanksHi Harish
Thanks for the update...
Steps performed
Tcode SE37 type in RSD_CUBE_GET and execute.In the new screen key in ur infocube name and execute.
In the new screen under export parameter under E_T_DIME ,I found 13 enteries -->click on the information button.
Can you please elborate on the below
Now find the column Nobject and note down the value.
Give that value and do the number buffering in SNRO.
Do i need to set Number Range buffering forall the dimensions or how/based on can i select which dim i need to setup an dhow to set configure in snro
and also
Are these settings have to be made individually in each system or in dev and transport them
Thanks in advance -
Create number range and assign new product id
hi,
can anyone tell me the steps to create the number range and assign it to the product id..
and replace existing product id to the new one through program or.. is there any standard program is available to change the product id
thanks
dineshHi Dinesh,
Agree with Arden, I think there is no number range feature for product IDs. You can have your own number range object and intervals with custom solution on UI to create product IDs sequentially.
I am not sure but have a look at the TCode: COMC_MATERIALID_ALL which may be doing what you need.
You cannot change the product ID once created I think.
You can change the category assignment of the products through the report : COM_PRODUCT_RECATEGORISATION
Check enhancement spot : CRM_PRODIL_EXIT which has got some methods for CREATE and MODIFY Products.
Hope this will be useful.
Regards,
Naresh -
According postion numer range grouping posting to FICO account(pe03,PPMOD)
Hi,everyone,
I need to according postion numer range grouping posting to FICO account.
t-code: Pe03 ,feature "PPMOD"
for instance:
I want at feature "PPMOD" set three grouping to posting to FICO three different account.
postion number ranger from 01000000~01999999 number ranger is grouping 1 ,
postion number ranger from 02000000~02999999 number ranger is grouping 2,
postion number ranger from 03000000~03999999 number ranger is grouping 3,
I test this at SAP system ,but failed ,so who can help me to solve this question.
thanks
Olivia.Yangassign each specific number ranges of postions, by creating relationship to specific VDSK1 or, work contract or Division (STAT1) or action type.
Action type is best i think
then in PE03 -- PPMOD-- maintain the values
hope it solves without development -
HI,
We are facing performance issue and i would like to perform BW number range buffering.
I used function module RSD_CUBE_GET to get the information on the dimension name.
What i notice is the name of the dimension in BW Production and BW Development is different.
I would like to know if we need to do Number range buffering directly in Production or should that be transported?
Appreciate anyone's advice on this..
Regards,
MailiHi Harish
Thanks for the update...
Steps performed
Tcode SE37 type in RSD_CUBE_GET and execute.In the new screen key in ur infocube name and execute.
In the new screen under export parameter under E_T_DIME ,I found 13 enteries -->click on the information button.
Can you please elborate on the below
Now find the column Nobject and note down the value.
Give that value and do the number buffering in SNRO.
Do i need to set Number Range buffering forall the dimensions or how/based on can i select which dim i need to setup an dhow to set configure in snro
and also
Are these settings have to be made individually in each system or in dev and transport them
Thanks in advance -
How check the number range buffers in bw..
can any one tell me the procedure...
how to check the number range buffers in sap bw,,,,can any one help me on this???
regardsPlease follow the steps mentioned below for checking the number ranges:
TCODE: /nse37
FUNCTION MODULE: RSD_CUBE_GET
Then click F8
From there I_INFOCUBE : Cube name(Here we can give the cube names from /nrsa1(click on infoprovider on leftside menu )
I_INFOCUBE Cubename
I_OBJVERS A
I_BYPASS_BUFFER x
I_WITH_ATR_NAV
Click on F8
In Export Parameters : select below one
E_T_DIME
There we will get the Time stamp and number range
Regards.
Message was edited by:
cnu babu -
Create Number Ranges for Budgeting
Hello Experts,
Can you please tell me what is the significance of "Create Number Ranges for Budgeting" in Customizing view of PS->Costs->Budget. ? Also, where does it impact ?
Please help.
Regards ,
Ankur
Edited by: ankur_sau on Feb 17, 2012 7:11 AMHi,
It refers that you can define your own number for budget documents which will be created on aloocation, supplement, transfer, release etc.. for the project.
Plus for all types of budget transactions like allocation, supplement, transfer, release etc. range defined in 01 will be used.
External number is not possible in this case.
Impact is budget documents will be created with the defined number range in this step.
Regards,
Harsh. -
Hi All Sap Experts
Please tell me How to create Number Range
I tried with the Transaction Code " SNRO "
But Im getting The following error
Dialog box title : " Buffering Methods ".
Message in the Dialog box is :
-Numbers may be lost!
-Do not use for Financial accounting Documents!!
?. Do you want set this Buffering method?
And another error is :
Dialog box title : " Transport number range intervals "
Message in the Dialog box is :
The number range intervals are not included in automatic customizing changes.
Transport all changes made within range interval maintenance must be
triggered manually.
In the initial screen for range interval maintenance function
<b> Interval</b> --> <b>Transport</b>
Please note the information that you get when transporting intervals.
So please tell me the solution for this error.
Thank you
Basu
Another ishi,
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
quant LIKE inri-quantity, "dummy
code LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
foreign_lock = 1
object_not_found = 2
system_failure = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZRECAUDIT'
IMPORTING
number = last_id
quantity = quant
returncode = code
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
EXPORTING
object = 'ZRECAUDIT'
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
ENDIF.
ENDFORM. " get_next_id
<u><i><b>refer the links</b></i></u>
http://www.sap-img.com/ge003.htm
http://www.sap-basis-abap.com/sapmm009.htm
http://www.erpgenie.com/abap/code/abap33.htm
http://www.kabai.com/abaps/z26.htm
Rgds
Anversha -
Steps to create LOGICAL DATABASE in sap
hi guys,
i have gone through many documents about LDB. But, i didnt get the steps to create a LDB.
plz provide me with the steps to be followed to create a LDB.
thnx,
shivaa.Hi Shiva,
This might help you!
Logical database structures
There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
Creating your own logical database
ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
1. Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
2. Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
3. Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
4. Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
Watch out!
The use of very large tables will degrade the performance of a logical database, so be aware of that trade-off. Remember that some tables in SAP are very complex, so they will be problematic in any user-defined logical database.
Declaring a logical database
Hereu2019s another surprising feature of logical databases: You do not assign them in your ABAP/4 Code. Instead, the system requires that you specify logical databases as attributes. So when you are creating a report, have your logical database identifier (the name you gave it) on hand when you are defining its attributes on the Program Attributes screen. The Attributes section of the screen (the lower half) will include a Logical database field, where you can declare your logical database.
Logical databases for increasing efficiency
Why else would you want to create a logical database? Consider that the logical databases already available to you begin with a root node and proceed downward from there. If the data object you wish to construct consists of items that are all below the root node, you can use an existing logical database program to extract the data, then trim away what you donu2019t want using SELECT statementsu2014or you can increase the speed of the logical database program considerably by redefining the logical database for your object and starting with a table down in the chain. Either way, youu2019ll eliminate a great deal of overhead.
Reward if useful.
Thankyou,
Regards. -
What are the basic steps for creating a content repository?
I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
PaulHi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name : Anything you like
Description : Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager : AclSecurityManager
ACL Manager Cache : ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur -
URGENT:Diagnose The Steps for Creating a Standby Database
Why Following Steps Can Not Succeed? What are the problems?
The Steps of Creating a Physical Standby Database
SQL>alter system set db_recovery_file_dest_size=2000m scope=both;
SQL>alter system set db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area' scope=both;
SQL> shutdown immediate
SQL> startup mount
SQL> alter database archivelog;
SQL>alter system set db_flashback_retention_target=120 scope=both;
SQL> alter database flashback on;
SQL> alter database force logging;
#The Primary Database Pfile after being edited
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orcl10XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/orcl10/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl10
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\orcl10\control01.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control02.ctl", "C:\oracle\product\10.2.0\oradata\orcl10\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/orcl10/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_NAME=orcl10
DB_UNIQUE_NAME=orcl10
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/orcl10/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_2=
'SERVICE=stdby4 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=stdby4
FAL_CLIENT=orcl10
DB_FILE_NAME_CONVERT='stdby4','orcl10'
LOG_FILE_NAME_CONVERT=
'/arch1/stdby4/','/arch1/orcl10/','/arch2/stdby4/','/arch2/orcl10/'
STANDBY_FILE_MANAGEMENT=AUTO
SQL> create spfile from pfile;
RMAN> connect target
RMAN> backup database;
###TheBackupHandle==C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL10\BACKUPSET\2007_11_06\O1_MF_NCSNF_TAG20071106T064915_3LZ7LRN8_.BKP
RMAN> backup datafile1,2,3,4,5;
C:\DocumentsandSettings\Administrator>mkdir C:\ORACLE\PRODUCT\10.2.0\ORADATA\temp\stdby4
SQL> alter database create standby controlfile as '/temp/stdby4.ctl';
SQL> create pfile='/temp/initstdby4.ora' from spfile;
#Pfile Edited for The Physical Standby Database
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# SGA Memory
sga_target=370147328
# Job Queues
job_queue_processes=10
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=stdby4XDB)"
# Miscellaneous
compatible=10.2.0.1.0
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0/admin/stdby4/adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=122683392
# Database Identification
db_domain=""
db_name=orcl9
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\stdby4\control01.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control02.ctl", "C:\oracle\product\10.2.0\oradata\stdby4\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0/stdby4/flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=300
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/bdump
core_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/cdump
user_dump_dest=C:\oracle\product\10.2.0/admin/stdby4/udump
# Processes and Sessions
processes=150
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
DB_UNIQUE_NAME=stdby4
LOG_ARCHIVE_CONFIG='DG_CONFIG=(orcl10,stdby4)'
DB_FILE_NAME_CONVERT='orcl10','stdby4'
LOG_FILE_NAME_CONVERT=
'/arch1/orcl10/','/arch1/stdby4/','/arch2/orcl10/','/arch2/stdby4/'
LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
LOG_ARCHIVE_DEST_1=
'LOCATION=/arch1/stdby4/
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=stdby4'
LOG_ARCHIVE_DEST_2=
'SERVICE=orcl10 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=orcl10'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=orcl10
FAL_CLIENT=stdby4
C:\Documents and Settings\Administrator>oradim -new -sid stdby4 -startmode manual
Create Listener and Network Service Name for Standby Database.Stop and start listener(not need)
SQL>create spfile from pfile='/temp/initstdby4.ora';
C:\Documents and Settings\Administrator>set oracle_sid=stdby4
SQL> startup mount;
ORA-01078: failure in processing system parameters
LRM-00109: ???????????????? 'C:\ORACLE\PRODUCT\10.2.0\DB_10\DATABASE\INITSTDBY4.ORA'
Message was edited by:
frank.qian
Message was edited by:
frank.qianyou have now two different pfiles: one in c:\temp\initstdby4.ora. and %ORACLE_HOME%\database\initstdby4.ora.
You are using the latter, as you didn't specify pfile= in your startup mount.
Also, if you are using a spfile, the only line in a pfile should be: spfile=....
In your pfile you are mixing up Unix like file locations with \ and Windows file locations with /
Could you please read the docs
more closely
more closely
more closely
and work
more carefully
more carefully
more carefully
It is very simple, but you must work carefully.
Sybrand Bakker
Senior Oracle DBA -
Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users
Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
FrankDear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat
Maybe you are looking for
-
Report Parameter Page in 6i Web
I am converted a Forms 4.5 character mode application to 6i Web. Forms6i Server is running on Red Hat Enterprise Linux 3. I am not running a reports server. I am not certain if I need to. So far, the application works fine on the Web. I have successf
-
CSS Link make Background disappear?
Hey Peeps, Ok have looked at a lot of other websites and noticed that most people link to a stylesheet rather than put the CSS on the page or in the template. I alos ran into a problem when working out of the office where I could not change my style
-
Hi guys.. After install JBuilder8, i got this error msg: "P1Q3.java": Error #: 750 : initialization error: com.borland.compiler.symtab.LoadError: java.io.IOException: class not found: class java.lang.Object Can you guys solve this error for me? Thank
-
Cannot play audio on Mov File.
Hello, I have recived a video file to work on for an edit. Video works fine EXCEPT for audio. *** Audio Track(s) Parameters *** - Format: Uncompressed PCM - Size: 116 MiB (3%) - FourCC: twos - Number(s) and language(s): 2: English - Details: 16-bit,
-
NDSIAddPacketFilter failed with error -608
Running BM3.8 SP5 on a Netware 6.5 SP7 server. I'm trying to update the filters using Craig Johnson's fix to allow Microsoft Update to work correctly and I get a "NDSIAddPacketFilter failed with error -608" message when I migrate the settings using F