STEPS TO create OSS message for sap

hi
we i need to k now how to create a oss message for sap
pls suggest? the steps
regards
Arora

Hi,
1. go to service.sap.com
2. Click SAP Support Portal
3. you can see Help & Support tab (after HOME)
4. click that
5. In that tab you can see Report a Product Error
If you have suitable rights you can post your OSS message from here.
Regards,
Omkar.

Similar Messages

  • How to Create OSS Message to SAP??

    Hi Experts,
    I need to create OSS Message to SAP? could you please provide the related info??

    Hi,
    You need to go to link https://websmp202.sap-ag.de/support. Here you need to enter credentials without which you cannot proceed further. And after entering to this site, you need to create OSS notes according to it's Priority.
    BR,
    SG.

  • Need step-by-step procedure to create OSS messages to SAP about error

    Hi gurus...
                         Can anybody provide me some procedure to send OSS messages to SAP from SAP service market place.
    Thanks in advance!
    Regds,
    BBR.

    As Juan said, under documentation.
    or you may search oss message creation in marketplace, will be able to find some notes like below
    Note 137736 - Message Creation(India, Sreelanka, Bangaldesh Cust)

  • How to create OSS note for SAP?

    Hi,
    How do I create OSS for SAP? Any step by step or notes related?
    appreciate your help!!!!!!
    Thanks,

    Hi Afi,
    If you are looking for creating an oss message with SAP  follow the path
    http://service.sap.com/notes --> Report a Product Error --> select your system --> Enter the search term ( related to your issue)  and componenet ( if its basis BC , change management BC-CTC , if its for solution manager use SV-SMG or the sub component )
    Now it will show the related oss notes and if that notes are not helpful you can create a message with SAP by clicking create message.
    Thanks
    Prince Jose

  • Create OSS Note for DDIC Change

    Hi Gurus,
    I am creating note to incorporate certain DDIC changes,when I am specifying correction instruction, the system asks for Corrective measure.
    Can any body help me in understanding what Corrective measures are & some documenents/tutorials where I can find steps about creating OSS Notes.
    Thanks  in advance,
    Regards,
    Gaurav

    hi ,
    Use following link
    http://help.sap.com/saphelp_47x200/helpdata/en/79/05f33925f12d20e10000000a114084/frameset.htm
    Regards,
    Amey

  • Steps to create f4 help for a table

    steps to create f4 help for a table

    These are the steps you have to take first:
    1. Please elaborate, your question does not all too clear.
    2. Search on SCN.
    3. Search on help.sap.com (for creating F4 search help).
    I guess you get the picture. Creating an F4 help is quite easy (you can find that on SCN for sure), but what do you mean by
    for a table
    1.Do you want to create a field which has an F4 help for searching tables or
    2. is this field part of a table and you need to have a search help for that field of that table in order to select some sort of value
    3. Is this a custom table.
    4. Is this a custom field for which F4 help should be added.
    5. Won't a domain value do.
    6. etc.

  • Need steps to create ant scripts for publishing and deploying projects.

    Need steps to create ant scripts for publishing and deploying projects.
    Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
    Any working example would help me to understand, please do mail me at [email protected]
    Thanks in advance.
    -Sree

    Sreekant,
    Please find the build file to publish and deploy.
    <project name="deployProject"
    xmlns:fuego="antlib:fuego.tools.ant.enterprise"
    xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
              <property file="./Properties/fuego_deploy.properties"/>
              <fuego:passport id="fuego.passport"
    directoryid="${fuego.directoryid}"
    preset="engine" />
    <target name="publish" description="Publish and deploy processes" depends = "takeInputs">
    <!-- Open a session to the Oracle BPM directory -->
    <fuego:session
    passportref="fuego.passport"
    verbose="true"
                   properties="${fuego.basedir}/conf/directory.xml"
    haltonerror="true" >
    <!-- Publish processes -->
    <fuego:publish fpr="${fuego.project.name}"
    deploy="true"
    engine="${fuego.engineName}"
                        importdata = "${fuego.importdata}"
                        automaproles="${fuego.automaproles}"
                        automapbuspars = "${fuego.automapbuspars}"
                        automapvars="${fuego.automapvars}"
                        automapconfigs = "${fuego.automapconfigs}">
    </fuego:publish>
    </fuego:session>
    </target>
    <target name= "takeInputs" >
    <input
    message="Please enter admin-username:"
    addproperty="fuego.participant"
    />
    <input
    message="Please enter admin-password:"
    addproperty="fuego.password"
    >
    </input>
    </target>
    </project>
    and find the properties I have used..
    fuego.basedir=C:\OraBPMEnterpriseHome
    fuego.directoryid=default
    fuego.engineName = bpmengine
    fuego.project.name = E:/antExamples/Project/CommonUtilities
    # If the below property is true then ant script imports data from the project, as defined in Studio.
    # This includes importing:
    #      •Holiday and Calendar rules
    #      •Organizational Units
    #      •Roles
    #      •Resource configurations
    #      •External Variables
    fuego.importdata = true
    #If the below property is true ant script automatically map abstract roles to real ones with the same name.
    fuego.automaproles=true
    #If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
    fuego.automapbuspars = true
    #If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
    fuego.automapvars=true
    #If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
    fuego.automapconfigs = true

  • How to create system message in SAP EP?

    Dear All,
    How to create system message in SAP EP?
    i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
    Portal installed on Netweaver 7.01 EHP1

    Hi Abay,
    You need to develop custom application to accomplished your requirement for system message in the potral.
    Please have a look at "Brodcast messages to logged on users in Portal:
    Brodcast messages to logged on users in Portal(Part1)
    Brodcast messages to logged on users in Portal(Part2)
    Also you can develop system message in the KM and integrate in the portal.
    Hope it will helps,
    Regards, Arun Jaiswal

  • How to log in to Service Desk to create sample message to SAP?

    Dear all,
    How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
    Regards
    GN

    Hi GN,
    You have different options to create messages in test component SV-SMG-SUP-TST:
    1. if you are on 7.1 you can create message using CRM_UI
    2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
    Thanks
    Regards,
    Vikram

  • FM to create support message for custom process type other than 'SLFN'

    Hi All
    Is there any function module or BAPI which will create support message for the custom process type other than SLFN.
    BAPI_NOTIFICATION_CREATE is posting only for the process type 'SLFN'
    Thanks in advance
    Regards
    Ravi

    Any ideas?

  • Steps to create Connection pool for Oracle apps Adapter.

    Hi All,
    Could please tel me the steps to create connection pool for Oracle Apps Adapter.
    Thanks,
    Parker

    Steps are given in section "Configuring Connection Information" in Apps Adapter User guide at below link -
    http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10537/T430238T430340.htm#T464886
    Regards,
    Anuj

  • How to create general message in sap screen for all users

    Hi Forum
    I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc)
    Can anyone show me how to do this and also i want to know what is sm02 is used for?
    Regards
    Friend

    You can do this by creating a message at the logon screen
    Read SAP Note 205487
    SM02 is used to send system messages like prior a system downtime or a scheduled maintainance, etc.
    regards
    Juan

  • Steps to create LOGICAL DATABASE in sap

    hi guys,
    i have gone through many documents about LDB. But, i didnt get the steps to create a LDB.
    plz provide me with the steps to be followed to create a LDB.
    thnx,
    shivaa.

    Hi Shiva,
    This might help you!
    Logical database structures
    There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
    Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
    Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
    Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
    Creating your own logical database
    ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
    1. Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
    2. Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
    3. Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
    4. Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
    Watch out!
    The use of very large tables will degrade the performance of a logical database, so be aware of that trade-off. Remember that some tables in SAP are very complex, so they will be problematic in any user-defined logical database.
    Declaring a logical database
    Hereu2019s another surprising feature of logical databases: You do not assign them in your ABAP/4 Code. Instead, the system requires that you specify logical databases as attributes. So when you are creating a report, have your logical database identifier (the name you gave it) on hand when you are defining its attributes on the Program Attributes screen. The Attributes section of the screen (the lower half) will include a Logical database field, where you can declare your logical database.
    Logical databases for increasing efficiency
    Why else would you want to create a logical database? Consider that the logical databases already available to you begin with a root node and proceed downward from there. If the data object you wish to construct consists of items that are all below the root node, you can use an existing logical database program to extract the data, then trim away what you donu2019t want using SELECT statementsu2014or you can increase the speed of the logical database program considerably by redefining the logical database for your object and starting with a table down in the chain. Either way, youu2019ll eliminate a great deal of overhead.
    Reward if useful.
    Thankyou,
    Regards.

  • Step 20 - Create new connection for NORTHWIND user, Northwind - Migrated

    Hello,
    I am migrating the Northwind database from Access to Oracle, and I am following the directions, but when I get to step 20, create a new connection for the Northwind User, Northwind - Migrated, I cannot create the connection. After running the converted model script that was generated by the workbench -- I don't see the Northwind - Migrated database. So how can I create a connection to it?
    Also -- after I ran the script, I did not see any messages in the log showing I ran the script, but the status bar at the bottom of the tool said script finished..... I am confused.
    Thanks!
    Jeff

    Anyone have this same issue trying to migrate the Northwind database to access using migration workbench?
    Thanks so much,
    Jeff

  • STEPS TO CREATE A MEMBER FOR LOYALTY PROGRAM

    Hi ,
    I am currently trying to set all the necessary steps to create a simple scenario in order to understand the functionality of loyalty. Until now, I have created a loyalty program, a RewardRule Group and a RewardRule, However, i don´t know which steps should i follow to create and assign a member into a loyalty program. 
    1.     Obviously, I have to create the member first, but, if I need to use a private account that already exist, to be assigned as a member, should I enter a specific role in the assigment role block inside the private account ?.A consultant told me that we have to use the role u201CMemberu201D, but this role doesn´t exist in our sytem
    2.     Once the member has been created, should i assign it into a membership , using the member ID created in the previous step?.     
    3.Other steps?
    Thanks, and waiting for any help
    DPL

    Hello,
    As far as I am aware, a member is just a standard individual/corporate account and Membership represents the participation of an individual account (natural person) in a loyalty program. I don't think any additional role needs to be maintained for a member to be added to a membership. If you want to create a new member, it would be equivalent to creating a new account.
    So the step should be to just create a membership and during creation, from the F4 help, you can choose the account you want to assign to this membership and also the Loyalty Program can be chosen from the DDLB.
    There are different types of membership available such as Standard Membership , Shared Account Membership
    Group Membership for which you can go through the documentation in SMP or help.sap.com.
    Hope this helps.
    Regards,
    Nisha

Maybe you are looking for