Steps to create service in SICF transaction

hi..
steps to create service in SICF transaction
thank you.

hi
good
go through this link
http://help.sap.com/saphelp_nw70/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm
thanks
mrutyun^
null

Similar Messages

IDOC_XML Service in SICF Transaction

Hello Everybody,
I want to use IDOC_XML Service in SICF Transaction.
Anybody has idea how to use this Service?
I want to know the parameters required to call this service outside and the content structure of the Posted data to this Service.
Its very urgent. so, if anybody has idea then please help me.
Regards,
Bhavik

Hi,
You might want to have a look at this Exposing IDoc as Webservice.
Hope that helps (please reward me if it does ,
Joerg

Steps to create Service Notification in Customer Service Module

Hi,
Can anyone let me know the steps involved and the process to create Service Notification in Customer Service Module.
Regards,
Ram

Hello SAP Guru's,
I am Shankar from chennai.
At present i have assigned to do the Customer Service process for our project.
I had tried the BPP method for doing it.
When i tried the Depot repair process from BPP i got error during billing process.
Can any one guide me with the step by steps procedure to do the senerio.
i searched the web for the process. but i couldnt able to find it.
If any one has the complete step by step procedure to do the process pls help me.
my id is ponshankar gmail com.
Thanks in advance
Warm regards,
Shankar

Steps to create IDOC when MB1C transaction trigger

Hello,
I want to create IDOC whever MB1C (Goods reciept) transaction is triggered. Basically I need to fill header and item data in IDOC segments and send that IDOC to 3rd party system. What are the steps need to follow in SAP to achieve this functionality. Also, if any IDOC failuer in 3rd party system, how do we re-trigger the IDOC again with the same data.
Thanks,
Shreekant

Hi Brad,
Thanks for your reply, please can you provide me the steps to create o/p type for MB1C transaction in NACE transaction?
I searched in sdn but no proper postings are available.
Waiting for your reply,
Shreekant

Steps to create STO using ME21N transaction

Hi,
Can anyone give me the steps to follow to create STO using ME21N transaction. When i try to create it, i am getting the error message : Not possible to determine shipping data for material 3863...
Please guide me...
Thanks in Advance,
Phani Kumar. S

I got the same error it was because in customizing you specify plant master data that is linked to a customer master record. You need to make sure the customer master data is set up from a sales perspective. E.g. customer must be extended to appropriate sales org. and division. Same with the material master but the customer master was my problem. This is configuration and you will have to move it through the transport queue so if you have a problem in your production system it will require a transport.
Jeremy McGurk

Problem in customer address while creating service notification using IW51

Hi Experts,
I am trying to create a BDC recording for creating Service Notification using transaction IW51. I have done the recording as follows. On the First screen I am entering notification type. Then on the next screen I am entering the Sold to party and its address by clicking on the icon besides it. After that i enter Functional location, equipment, priority and req end date and save it. When I am running this recording after transferring it to a progam , somehow the address disappears for the newly created notification. I am not able to figure out the reason. Kindly guide me.
Thanks,
Sonal

I assume you have tried this with update mode = 'A'-all and watched it actually work correctly? May I ask why the BDC instead of BAPI? Is it because you're creating a new partner? If so, are you pressing save on that partner creation?

Problem while attaching file to create service notification(IW51) iView

Hi,
We are using Create Service Notification (IW51) transaction iView (SAP GUI for HTML) in one of our portal workset.
Few users are facing issue while trying to attach file to the Service Notification. When they open the file dialogue to attach the file
it keeps on spinning and hangs, nothing proceeds further. Does anyone faced similar issue if so can you provide solution for this?
Regards,
Abhiram.

Hi,
Check the users experiencing issues java runtime on their systems. The file system object uses the JRE. Also check that if the java runtime is up-to-date and of teh same version whose systems are working, that their browser security setting as well as trusted sites have been configured correctly.

Unable to attach file to create service notification(IW51) transactio iView

Hi,
We are using Create Service Notification (IW51) transaction iView (SAP GUI for HTML) in one of our portal workset.
Few users are facing issue while trying to attach file to the Service Notification. When they open the file dialogue to attach the file
it keeps on spinning and hangs, nothing proceeds further. Does anyone faced similar issue if so can you provide solution for this?
Regards,
Abhiram.

<< Do not post the same question across a number of forums >>

How to create Service Contract-Urgent

Hii All,
Can anyone tell me what all the requirements needed to create a service contract?
I shall be thankful to anyone who could please please send me the step by step procedure to create the service contract.
Thanks
Gopi.

Hi Gopal ,
Use following steps for creating service contract.
1] Use t-code <b>ME31K</b>
2] Enter details like Vendor , Agreement type (MK) , Purch Orgn Purch.group.In the same , enter Item Category as "<b>D</b>" and respective account assignment category (K,F etc.)
3]In second screen enter Validity period , then short text for the desired services.In next screen , enter Service details and proper account assnmnt
Save the contract
Regards
Nilesh

Error when creating Service for transaction in SICF.

Hi,
I created a Transaction, and for this transaction transaction I am trying to create a service for this transaction using SICF transaction.
but after creagting service when I am doing test service I am gettging error follwoing message - can any one please let me know how to solve this issue.
The following error text was processed in the system DP2 : Communication failure
The error occurred on the application server dp2dca0u_DP2_01 and in the work process 0 .
The termination type was: IMC_CANCEL_TX
The ABAP call stack was:
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Thanks.
Rajesh.

Hi,
First you need to publish your service which you would get from the dropdown fro utilities->setting->its->publish.
Also check in transaction SICF whether your serivce is actiavted- else activate the same. you can find your serivice under the following path
default_host/sap/bc/gui/sap/its/
ITS Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/5f/1fbd2f4aee11d189740000e8322d00/frameset.htm
Debugging Flow Logic Applications
http://help.sap.com/saphelp_47x200/helpdata/en/d1/7033b4ae5d11d3806500c04f99fbf0/frameset.htm
~rfcDebugging
http://help.sap.com/saphelp_47x200/helpdata/en/5f/1fbbb14aee11d189740000e8322d00/frameset.htm
Debugging WebRFC Applications
http://help.sap.com/saphelp_47x200/helpdata/en/2b/d9211d4b8a11d1894c0000e8323c4f/frameset.htm
Hope that helps,
Regards,
Gopal
Edited by: Gopal on Oct 30, 2008 3:23 PM

Difference between creating service in SE80 and SICF

Hello All,
In SE80 we create a service specifying the Tcode,theme and publish the service.In SICF also we create a sub element,giving the tcode.I want to know what we do exactly in SE80 and SICF (in layman's language).
Thanks,
Rakesh.

Hello Rakesh,
If you are using the Integrated ITS:
- the service file in SE80 means nothing. Even when you publish the service parameters are not used.
- the service parameters must be in the GUI Configuration of SICF
So you must create the service node in SICF when using the Integrated ITS.
Edgar

Steps to create PO for service order

Hi All,
I am trying to create a Service Po its giving me the error message mention below. what i am missing.
You have no authorization to create without reference to another document
Message no. MEPO063
Please advise
Thank you

hi,
First creat service master - (AC03),
You can copy from exising service master. and goto ME21N, select vendor and comp,pur group, pur org.
Enter Item category = D and a/c assign = K than enter input text at short text field (don't enter any material master code at material code field) ,
here you willl find "material data" at item details are there you have to select your service master code (where have you created by you at AC03).
save the po and do reqular process.
reg
mrs

Could not create the associated SICF node automatically.

Dear Guru,
I have Encountered an issue while creating a BSP application through SE80\BSP Application.
while I am trying to create a BSP application ( for e.g with name ZSR_BSP_APP_01) it is showing following messge :
SICF Node For ZSR_BSP_APP_01.
Could not create the associated SICF node automatically.
Add a node manually using "HTTP Service Maintenance"
(Transaction SICF)
After creating and activating all the pages of it when i am trying to execute it is showing follwing error in Explorer.
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP exception: Application sap/zsr_bsp_app_01 cannot be started. Create an application node using Transaction SICF.
Error type:
Your SAP Business Server Pages Team
please guide how to resolve this issue
how i should creade application node for the object ZSR_BSP_APP_01 using transaction Code SICF.
Please guide me through the setp - by - step procedure to perform it.
Thanks & Regards
Saifur Rahaman

findout the way to resolve this

Services in SICF and in SE80

Hi friends,
Can anybody tell me the difference between services created in SICF and the services in SE80.From where i have to execute the services?
I have created a screen-based service in se80 and published the service.
In SICF i have created the sub-element for the same service created in se80.I have done all the settings.and activated the service and tested that service here itself.
But my doubt is once the service is activated in SICF , from where this service should be excuted? ie., either from SICF or from SE80?
Am confusing at this step.please help me out.
Thanks in advance.
Regards
sireesha

mmm you are a bit confused....let me see if I can help shed some light....
In SE80, you will customize/develop/test your ITS service. Also, from SE80, you can publish it out (yes, even if you use integrated/internal ITS, you still "publish").
SICF, however, is the "framework"/enabler for the internal/integrated ITS. SICF simply allows you to admin your services....such as adding properties about them, activate/deactivate/etc. One big reason for using SICF is that you HAVE to define your service parameters (called "settings" there). Theses are much like the same service parameters your set for your top level service file in SE80, however, integrated ITS ignores those service params (as well as the global service file).Therefore, you have to (re)define them in SICF. Confusing, I know. But it has a plus side in that you can define some services in one place and not in the other so that the service can behave differently if accessed via external ITS vs. integrated ITS.
As far as testing, you are very right....you can execute/test your service from either location.
For me, I tend to set up my service in SICF, but do all my work and testing in SE80 (just more used to it). But it is up to you.
Hope this helps!

Problem in Creating Service contract Quote

Hi,
I have a problem while creating Service Contract Quote. The Problem is "No Items being created in Service Contract Quote."
I am copying these line items from the Package Quote(Programatically). I am reading the Package Quote Lines Items using CRM_ORDER_READ and I am looping these one by one, and copying into one Item Table. Passed this table, to MAINTAIN_ORDERADM_I function module. And Then I am calling SAVE function module.
But, for me service contract Quote is being created with no line items.
Can you please let me know, how can I solve this problem.
And let me know what are the necessary steps to be taken progrmtically, for creating Service Contract Quote from a Package Quote.
Thanks,
Sandeep

A standard way of doing this would be to create an action in service contract with method call processing type, and method COPY_DOCUMENT. For this you need to do the following:
1) Create a new action called "SRV_CNTRCT_QUOTE_CREATE" in action pofile already attached to Package Quote. Use
CRMC_ACTION_DEF Tcode for this.
2) Choose processing type as method call and method as COPY_DOCUMENT.
3) Choose parameter CRMD_ORDERADM_H, PROCESS_TYPE with initial value as transaction type of Serv Contract Quote.
4) Institute start and scheduled conditions if required in CRMC_ACTION_CONF.
Note: For this copying controls at transaction level, item category level and itemcat determination while copying should have been determined.
Regds,
Raghu

Steps to create service in SICF transaction

Similar Messages

Maybe you are looking for