Steps to Create Web Dynpro iview

Hi,
i created web dynpro application using Netweaver Developer Studio.
Now i want to show that on portal.
so please let me know the steps to create web dynpro iview.
regards
mmukesh

Hi,
Logon to portal with administrator uid/pwd. Content Administration->Portal Content. Right Click on the folder 'Portal Content' and select 'iView'->'New'. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'. In the 2nd step, provide iView Name and iView ID and a prefix.
Salect 'Java' in the 3rd step. n the 4th step, select the System (WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace and the Application Name. An iView will be available now.
After creating an iView, you should create a page and add the iView to it. Then create a role and add your page to it. Then assign this role to your user. Set the role property 'Entry Point' to true.
Then when you log into the portal you'll see your role in the top level navigation, click on it to see your iView.
Regards
Srinivasan T

Similar Messages

  • How to create web dynpro iView?

    Hi all,
       How to create web dynpro iView?
    I want to create a web dynpro iView where WD is displayed in its icon when create.
    Can you give me the steps and which options to select on each steps.
    Thanks.

    Hi Virenp
    Welcome to SDN
    First Check the below Link  before the below message.so it would give clear idea
    [Creating a Web Dynpro-Based iView|http://help.sap.com/saphelp_nw70/helpdata/en/11/0d653f0c9fa075e10000000a114084/content.htm]
    http://help.sap.com/saphelp_nw70/helpdata/en/11/0d653f0c9fa075e10000000a114084/content.htm
    Go to Content_Administration --> Click on Portal content  -
    > Go any of your Folder
    Right click on the Folder and Click on New -
    >  Iview
    Selct the 3rd Option webdynpro java applicaiton.
    Select the iview as FULL page for one application
    Then select the webdynpro application you deployed  (it would be either under Local or in SAP.com folder)
    Click on next,. and UNCHECK the Option where it would prompt to Create Page.. this is necessary only when u need a page
    Click Finish  ,  and Preview the Iview..
    Suggestion : Always check on [help.sap.com |http://help.sap.com ] for any queries, which is the Bible for SAP reference.
    Thanks
    KT

  • How to create Web dynpro ABAP iview in EP ?

    Hi guys,
    I have created Web dynpro iview in EP but when I execute it I'm getting errpr msg.
    page cann't display.
    Application neme= correct
    namespace= correct
    System allias=correct.
    Could u plz tell me where is the problem?
    Thanks
    Prakash
    Edited by: Prakash Rout on May 12, 2009 9:39 AM

    Hii ,
    Check this article for settings of Web dynpro abap iview, might be helpful
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0235c19-9493-2b10-64a5-8487b23a7a41
    Hope it helps..
    Sonal...

  • Web Dynpro iView  fail to execute on portal side

    Hi Gurus
    I have Created Web Dynpro Application in Backend ( ECC ).
    If i tested them from SICF transaction or SE80 transaction they are working fine.
    Now on Portal side, I hav created Web Dynpro iView for Those ICF Services (Web Dynpro Apllications).
    But most of time they Fails to execute from Portal side.
    Symptoms :
    On Browser Status Bar It keep on refreshing that iView address.
    and Nothing comes on O/P side.
    What culde be the Problem ?
    How To resolve !!
    Thanks & Regards
    PK

    This regularly happens to us with new WDA applications - seems to be a "bug".
    Deactivate the service in SICF and reactivate it, then try your iView again.
    If that doesn't work, deactivate the whole WebDynpro node in SICF and reactivate it (including all relevant sub nodes & services).
    Pretty sure that will fix it.

  • Problem while creating SAP Web Dynpro iView

    Hi,
    I am creating SAP Web Dynpro iView from iView Template.
    The SAP Web Dynpro System Object is being created. The System Alias is also being created.
    The Test Connection is successful with Portal Server.
    Now, while creating SAP Web Dynpro iView from Template in Step 4:
    I am not getting my System while an old system which is being deleted is being displayed.
    Name of my System Object is: WD_System and System alias is: WD_Alias.
    The Step name is:
    Step 4:  Application Parameter
    Enter the paramater(s) of the application for which you want to create the iView 
    Regards
    Kaushik Banerjee

    Hi Bala,
    I am not getting the System Alias under:
    User Administration-> User Mapping-> Logon Data(Select a Principal) (System Alias).
    The System is successfully built under System Amininstration->System Configuration->System Landscape->Portal Content->kaushikb named WD_System and System Alias is named as: WebDynpro_alias.
    The Test Connection is successful.
    I am displaying the result below:
    SAP Web AS Connection
      Test Details:
    The test performs the following:
    1. Checks the validity of the system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Checks if a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the server to see if it is alive.
    7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    8. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (kolapon:50000)
    5. The host name kolapon was resolved successfully.
    6. The server kolapon was pinged successfully.
    7. The WAS ping service http://kolapon:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
    8. An HTTP/S connection to http://kolapon:50000 was obtained successfully.
    Regards
    Kaushik Banerjee

  • Web Dynpro iView Translation

    Hi Everyone,
    We have a requirement at my client to deliver the portal in two languages (Chinese and English). When I change the language of the user from English to Chinese (China) the portal content langauge changes (TLN, Masthead etc. are displayed in Chinese), however when I navigate to any Web Dynpro iViews e.g. Bank Information (ESS iView), I still see everything in English. I have checked my Web Dynpro Content Admin and both zh_CN, zh_HK are available.
    My Second question is if I add some verbiage to this iView via WDP Personalization (Ctrl + right click), can this verbiage also be translated? If so, how?
    Thanks for all your help!
    - Osman

    You should use Content AdministratorPortal Content Translation tab for translation the texts (names) for the PCD Objects (iViews, pages Worksets, Roles Folders) ect.
    In Portal Content Translation Fallow the Fallowing Steps which are very simple
    1) Go to Translation work Coordination Portal Content and Right Click your Folder and select NewTranslation Worklist
    2) This will create the translation Worklist to which you can add your PCD Objects for Translation
    3) Go to Your Folder Containing your iViews, right Click and u2018Add Object To Translation Worklistu2019
    4) After You have added all the objects you want to translate, click u2018Generate Translation Datau2019 Button at the top on the Translation Worklist screen
    5) Click the u2018Release for Translationu2019 button in the screen that appears.
    6) Click close in the screen that appears.
    7) Go to u2018Worklist Translationu2019 link
    8) Search for your Worklist you just created using the search box.
    9) Select the Worklist from the result list
    10) At the Bottom of the screen select the u2018Source and Target Languageu2019 from the dropdown.
    11) Click the Load for Translation
    12) Choose whichever texts you want to translate and enter the Translate Text in the box for the target text
    13) After u r done with all the translation, click close.
    14) Save all and Close
    15) You will go back to the previous Screen again. There select your translation Worklist and click Mark as Translated
    16) Go back to the u2018Translation Worklist Coordinationu2019 link and open your translation Worklist from your folder
    17) Click u2018Publish Translationu2019 Button
    18) Finally Check the portal content
    Polaka

  • IView not found error when excuting ABAP Web Dynpro iView

    Hi Experts,
    I have created one ABAP Web Dynpro iView for an existing Application.
    Parameters I have passed for iView creation.
    Namespace : sap
    Application Name: SampleApp
    System Name: R3_SYS.
    Can any one please pass on me the details what are the mandatory parameters need to be passed.
    Thanks in Advance,
    Chinna.

    Hi Chinna,
    You need to check the following parameters like
    Namespace - should be 'sap' as this is root node in SICF
    Application Name: - check name of WD application in se80
    Please refer to below thread for creating WD ABAP iview.
    Re: Webdynpro ABAP iView Blank Page
    Web Dynpro for ABAP iVIew's Namespace parameter
    how to create iview from webdynpro application  abap
    Hope it helps
    Regards
    Arun

  • Javascript error in web Dynpro iViews

    Hello,
    I've developed a web Dynpro page which accesses the default database ( maxdb). This page is working fine when tested by calling the application from the browser.
    Now I've created an web dynpro iview in portal ( EP-6 SP15- Sneak preview). I get java script errors - <i>SSR undefined</i> and none of the drop down boxes are populated.
    Can anyone help me out in this?
    Thanks,
    Sudhakar

    Probably the stylesheets of your Portal are not compatible to the used Web Dynpro version.
    Armin

  • Web dynpro iview in web page composer ?

    Hi All,
                     I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
    Regards,
    Rahul.

    HI Rahul,
    As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
    But you can try to create a URL iView from Web Dynpro application
    and then add that URL iView to your page.
    _Vishal

  • How to mapping Bapi_EeCatimesheet with Web Dynpro iview

    I have problem with CATS:
    1. mapping field from Web Dynpro iview with Bapi_EeCatimesheet_Worklist
    Column: Activity = Bapi_EeCatimesheet_Worklist_input_Out.???
    Column: xxx = ???
    Variable as TimeSheet of SAP Easy View
    2. How to insert Employee timesheet into SAP System by Bapi

    Hi,
    At first time the ApplicationParameter was not displayed among the mappable properties. After that I changed the ApplicationParameter property of the WD iView (so it became different from the default one) and created a new room template. What happened ? At the new template I could map to room_id to the ApplicationParameter. Interesting, not?
    One other thing: What do you think about the following ?
    1. First creating a "Concat Strings" extension to create a string like "room_id=<room_id>"
    2. Creating an other extension and mapping the newly created string to the ApplicationParameter property
    3. Getting the parameter from WD with the help of getRequestParameter(java.lang.String key)
    I have not tried it yet, but I plan to do it.
    Regards,
    Ferenc

  • Web dynpro iviews

    Hi all,
    I have couple of questions on web dynpro iviews.
    Is it necessary to have sld configured for executing a web dynpro application as an iview in the portal.
    My other question is how do you set the Jco connections for a web dynpro application. Please advice
    thanks for your help in advance.
    regards
    Henry Ragl

    Hi Henry,
    Yes,If you are developing Web Dynpro applications that connect to a back end with a static user, the use of an SLD means that you can, for example, avoid using passwords as part of the Web Dynpro application code, since the SLD utilizes a secure storage for the password.
    You configure an SLD for a Web Dynpro application using the Visual Administrator.
    Your Second Question Jco Connection Please click the link below.
    To Create Jco Connection you have to go to your J2EE Engine.
    http://localhost:50000/ and click the Web Dypro. And again click the Content Administrator remaining details are in the link below
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/content.htm">Jco Connection</a>
    PS: Give the points if it helps you

  • SAP Web Dynpro iView not working!

    We are trying to run BI reports based on Web Dynpro ABAP in portal.  I created a SAP Web Dynpro iView with following parameters
    System : SAP_LocalSystem
    Namespace : sap
    Applicatioin Name : ZXXXXX_RRE  (This is the template name)
    When I try to preview the report I get portal runtime error with following error dump in log file
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template
    &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;ProducerInfo&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;#39;SAP_LocalSystem&amp;#39;,
    Attribute: &amp;#39;client&amp;#39;.
    I have checked SAP_BW system object and tested the connections all connection test for SAP_BW is successful.  BI Portal system is set up with SAP web dispatcher, ITS and WEB host names in system object are configured something like xxxx.hostname.com:443 since it's SSL.
    Am I missing anything here?
    Thanks
    Praveen

    Hello Pravin,
    Currently i am also facing the same error. I am having set of Webdynpro-ABAP applications, and accessing from Portal.
    I tested respective applications from SE80, all are working fine.But while accessing from Portal its giving Portal runtime error-Unable to parse etc....
    I checked my system object.. both WAS and ITS connections are successful.but i mentioned its related to ITS, where can i test my ITS further level..
    Though these are WDA applications , how these related to ITS..
    I am also getting same error message.. Please suggest how can i go head
    Thanks in Advance
    Ganesh

  • Error in SAP Web Dynpro Iview

    Hi,
    We are facing problem with iviews, created using SAP Web Dynpro iView Template. Whenever user clicks on any of SAP Web Dynpro iView , portal main page is opened instead of Web Dynpro application. Same problem is encounted on preview of the iView. Everything was working fine till yesterday and suddenly we are facing this problem.
    Also, iview created using Web Dynpro Java Application option are working fine.
    What can be the reason behind the problem?
    Need your help.
    Thanks in Advance,
    Apurva

    Hi,
    Some times we get the home page instaed of the application.
    This may be due to the application is not active.
    Test from se80.
    If it is working fine create the iview again i think there are changes made to the application.
    Thanks,
    gopal

  • BI Reports in Web Dynpro iView

    Hi Experts,
    I need a favour from you in estimating small requirement with BI reports & Web Dynpro iView.
    My first query, is it possible to build horizontal drilldown menus
    Second query, is it possible link the BI Reports from Web Dynpro application
    third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.
    If all the above are possible, I have a requirement that should fulfil the below
    In a portl iView, I have several  BI Reports displays based on called report. But at the moment links to the report are in simple hyper link. Instead of hyperlinks, I want a horizontal menus as hierarchical/child structure. To acomplish this I chose, Web Dynpro as the best solution.
    I have some development exeperience in Web Dynpro, but never encounterd such a requirement.
    If any one can help me out in estimation, posibilites of the solution that would be a great help for me.
    Your help will be highly appreciated.
    Thanks in Advance,
    Chinna.

    Hi Chinna,
    Check the following threads:
    Show BI report in a Web Dynpro App
    BI data in Web Dynpro
    Re: How to create a Report from WebDympro
    Re: BW server details from webdynpro
    /community [original link is broken]://Bi,Portal Webdynpro
    And a How To Guide:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
    *Second query, is it possible link the BI Reports from Web Dynpro application
    third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.*
    You can not assign two types of app in a single iview but you can have multiple iviews assigned to a page.
    This will guide you.
    Regards.
    Rajat

  • Web Dynpro iView - Blank Page

    Hi,
    we have a problem with our web dynpro iviews. Although there are all necessary fields of the iview template filled (application name, application parameter, namespace (sap), system, web dynpro for java and windows client) there only appears a blank page with a red X, when we preview the iview.
    Before we've tried to create a web dynpro iview, we've created an url iview for the web dynpro and this one was working fine.. The problem was, that it doesn't display the application in our custom portal theme with an url iview - only the default sap theme was displayed. 
    I've searched in the forum, but I found not really something for our case.
    It would be great, if anyone can point to what the error could be..
    Thanks in advance,
    Lydia

    Hi,
    Check the SAP note: Note 1446099 - Web Dynpro application not displayed in customer theme
    Try creating a Web Dynpro ABAP iview, you can find the template in Iview Template.
    And in that make sure Supply Portal Stylesheet is set to yes so that it takes Portal Stylesheet.
    Alternative to that is upload the theme to R/3.
    To do that check SE38 program WD_THEME
    Download portal theme
    Once you have the Theme uploaded you need to make one more setting.
    In SE80 WD_Global_Setting - goto Change and change Stylesheet URI and ensure the iView property Supply Portal Stylesheet is set to no.
    Hope this helps.
    Cheers-
    Pramod

Maybe you are looking for

  • Gui_download Function module is not working in Background Scheduling

    Hi Experts, Function modules like GUI_DOWNLOAD are not working in background scheduled jobs, It is raising an exception. Though it is working fine in foreground execution. Please provide me solution for this challenging task. you could be rated well

  • Send attachments from finder via Outlook 2011 for Mac

    I am trying to right click attachments in finder and choose send by mail. Unfortunately only mac mail comes up and I need to use outlook 2011. Its installed and chosen as default in both outlook settings and mail settings. Can drag attachments to out

  • The iPhone cannot by synced. An unknown error occurred (-4).

    I'm trying to sync my iPhone with iTunes. I keep getting the error message - The iPhone cannot by synced. An unknown error occurred (-4). Using: iTunes 12.1.1 iPhone 5s iOS 8.2 Desktop PC, Windows 7 I have already tried: uninstalling iTunes and reins

  • Can't connect to WiFi after OS update and reboot of Playbook

    Phoned RIM Support, and was advised it is a known problem, and our best people are working on it. Not sure how they will communicate fix to a device that may be corrupted.

  • Delete Duplicate only

    Dear Friends, I am working On report, In that i have to delete only duplicate records , ( Delete adjestent duplicate comapring field will delete the entire row) I dont want to delete entire row just want to show duplicate records empty on the next ro