Steps to extend HzPuiPersonProfileVO

All,
I am trying to extend VO HzPuiPersonProfileVO....by adding the Hz_Education (Degree_Received column) table. Eventually, I will be adding a region to a page (imcPerProfile) and in that region will be this new attribute in table format. Question is, which is done first....extend the VO or extend the EO first. Currently, these are my steps. Yes....I am a newbie to all this...
1. Ftp ar/imc class files to myclasses folder
2. Ftp ar/imc mds files to myprojects (i can succesfully run standard pages in Jdeveloper/Embedded OC4J)
3. Create OA Workspace/Project
4. Start to Extend VO HzPuiPersonProfileVO (enter default package, enter name of new VO, select VO to be extended then click next.
5. First problem....the EO is defaulted...so my only option is to select "Read-Only" as the data the new VO is to manage
6. In this process, enter my new SQL which extends HZ_PERSON_PROFILES_CPUI_V by joining Hz_Education table to retrieve values from the Degree_Received column of this table.
7. At this point, I come to a screahing halt as I get error that I have to map this New VO to an EO (which does not have the new attribute.
8. So i back out and Extend EO...however, rather than use apps/HZ_PERSON_PROFILES_CPUI_V, I use a new view that constitutes HZ_PERSON_PROFILES_CPUI_V and HZ_Education table (which is ABC/ABC_PERSON_CREDENTIALS).....once done, I select my new attributes and generate methods (Accessors/Validation/Create/Remove methods). At this point i choose to automatically generate a degault VO (I have also chosen not do this and repeat my earlier steps (1-4).....this time with an EO that has new attribute.
9. Extend Application Module (link to VO)
10. Create Region (and with table properties....stack layout e.t.c)
11. Make/Rebuild and run....and it errors out (+Error(41,20): method create(oracle.jbo.AttributeList) in class xx.oracle.apps.ar.hz.components.party.person.server.abcHzPuiPersonProfileEOExExImpl cannot override method create(oracle.jbo.AttributeList) in class oracle.apps.ar.hz.components.party.person.server.HzPuiPersonProfileEOImpl with weaker access privileges, was public+) during the make/build.
So...the question is, what is the best way to extend a VO when the column/Attribute needed is from another table? Do I extend the EO first before extending the VO....and is it necessary to extend the AM. Obviously, i would need to extend the Controller class...( I will worry about that later)

You can either use 2 "changetype:modify" operations (not changetype:add since you're trying to modify an existing entry), or you can stop you DS, then edit the 99user.ldif by hand and start it again .

Similar Messages

What are the steps for extending a OAF page (11iApplication Salary screen)

I couldn't proceed further beyond step 3 after following the instruction in OAF Developer's Guide, Chapter 9, Common BC4J Extension, page 890.
In Step 3, it says...
Create a new view object that extends the parent VO (you create the extended VO just as you would any other view object with the following difference: specify the name of the parent VO in the Extends View Object field in the first page of the wizard). Be sure to follow the naming standard described above.
Note that the parent VO package must be included in your project before you can extend the parent VO.
The issue I have now is, during the creation of a new VO, I need to extend the parent VO. However, I do not see any parentVO in the Parent window for me to select.
I want to know what are the initial steps or normal steps you usually do when extending a OAF page, so I know where I missed.
Thanks.
**Purpose:
To make the ViewAttribute:ProposalReason as a required field when entering a new salary record
**Some information about the Salary screen:
Page:
/oracle/apps/per/saladmin/webui/NewSalaryPG
Page Denefination:
header: New Salary CO: NewProposalCO
messageComponentLayout: (NewProposalRN)
messageRadioGroup: "Reason for Change"
VO:PerPayProposalsVO1 ViewAttribute:ProposalReason
AM:oracle.apps.per.saladmin.server.SaladminAM
VO:oracle.apps.per.saladmin.server.PerPayProposalsVO
EO:oracle.apps.per.schema.server.PerPayProposalsEO
CO:oracle.apps.per.saladmin.webui.NewProposalCO
AM: Version:
SaladminAMImpl.java 115.80
VO Version:
PerPayProposalsVOImpl.java 115.16
PerPayProposalsVORowImpl.java 115.8
EO Version:
PerPayProposalsEOImpl.java
Message was edited by:
user562389

Hi,
which version of JDeveloper is this ? 11 ?
Frank

XK99 detailed steps to extend vendors from one company code to other

Company code X having vendors 9000000000 to 9999999999. Now I wanted to extend all vendors to Y company code. Kindly suggest me detailed steps. i know XK99 but give steps.

Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot

Configuration steps for Extended Classic Scenario

Hi All,
Could you please let me know what are the configuration steps required for extended classic scenario.
Thanks in advance

Hi,
Important Settings that Determine the Extended Classic Scenario
The following settings are required for the extended classic scenario:
u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
This is for your additional information.
Hope this helps.
Regards,
Vikas

Steps to extend the schema if I have no access to the web console

Hello,
I am usin DS 6.2. The web console is not applicable in my case. So I must extend the schema manually.
I want to add an attribute type and an objectclass. I do have a test server and I did
ldapsearch -L -b "cn=schema" objectclass='*'
and then took what I need:
dn: cn=schema
changetype: add
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
When I do:
ldapadd -c -h hostname -p 389 -D "cn=Directory manager" -w password -f myldif
adding new entry cn=schema
ldap_add: Object class violation
I tried to add these lines
attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
to 99users.ldif and restarted the server. No progress.
any idea please?

You can either use 2 "changetype:modify" operations (not changetype:add since you're trying to modify an existing entry), or you can stop you DS, then edit the 99user.ldif by hand and start it again .

Extend OWSM with Custom Policy Step: MessageContext.setResponseMessage()?

Hi,
I intend to create a custom policy step for OWSM.
In the execute method of my step (that extends AbstractStep) I want to set the Response Message using the setResponseMessage() method. According to the Extensibility Guide, this method should be passed a com.cfluent.ccore.message.SOAPMessage object as parameter.
Basically, the code looks something like this:
public IResult execute(IMessageContext messageContext) throws Fault {
MessageContext msgCtxt = (MessageContext)messageContext;
Result result = new Result();
msgCtxt.setResponseMessage(msgCtxt.getRequestMessage());
result.setStatus(IResult.SUCCEEDED);
return result;
At compile time however, JDeveloper throws the following error:
SOAPMessage not found in class nl.amis.soa.CustomStep
and points to the line
msgCtxt.setResponseMessage(msgCtxt.getRequestMessage());
Should I use AXIS SOAP objects (knowing OWSM is based on AXIS or uses it)? Or a MessageFactory? Or ... ?
Any tips and preferably a code sample is much appreciated!
Thanks, Sjoerd

Hi Sjoerd ,
Looks like documentation error. Are you importing the om.cfluent.ccore.message.SOAPMessage class? Try compiling without the import. I was able to compile your code with no issues. All I have is coresv-4.0.jar added to my jDev project.
FYI MessageContext.get/setRequestMessage() really takes javax.xml.soap.SOAPMessage as parameter.
Here is the code I can compile:
package com.junk.wsm;
import com.cfluent.pipelineengine.container.MessageContext;
import com.cfluent.policysteps.sdk.AbstractStep;
import com.cfluent.policysteps.sdk.IMessageContext;
import com.cfluent.policysteps.sdk.IResult;
import com.cfluent.policysteps.sdk.Result;
public class junkStep extends AbstractStep {
public junkStep() {
public IResult execute(IMessageContext messageContext) {
MessageContext msgCtxt = (MessageContext)messageContext;
Result result = new Result();
msgCtxt.setResponseMessage(msgCtxt.getRequestMessage());
result.setStatus(IResult.SUCCEEDED);
return result;
Regards,
Rajesh

Error message when extending skype number

Hi guys
Really hope someone can help me with this. Been dealing with skype chat and email support for hours and hours over last three days with absolutely no progress.
I have 8 skype numbers within my skype manager account and for some reason, one of them did not renew properly last week (the others renew every month or quarter). When I follow the steps to extend the number within the manager control panel (features, skype number, click on expired number, select "reactive number", pick monthly, quarterly or annual payments), I get the following message.
Service Unavailable
We're having technical problems. We're sorry for the inconvenience. Please try again after a few minutes.
The same message appears on IE, Firefox and Chrome. This is our main office number and its incredibly frustrating for us. If I try to extend via the individual skype account (rather than manager control manager) I either get an error message or a message saying "your request has been sent to your administrator"
Is there a solution out there? Is this a bug?

Having same problem. Spent one hour w/ Chat support, no joy. Anyone get this addressed, and if so, what did you have to do?

To extend AirPort Extreme 802.11n

Wanting to extend the range of my AirPort Extreme 802.11n (version 7.4.2)
I have a Airport Express as trial also a 802.11n. AirPort Utility has a lot of trouble finding the Express. When AirPort Utility does find it and I want to set up the Express I have to switch from the Extreme to the Express. Unfortunate side-effect is that AirPort Utility then looses track of the Extreme and I can't "join" the Express as Utility can't find anything to join.
As I have the Express on trial of a friend I did the normal reset (button for 10 sec) and even the factory reset (unplug, press reset button while plugging in) however I did notice it still had his settings. Changed those but as I said before it seems for AirPort Utility is is either or instead of both.

Based on your description, it sounds like the AXn is configured to join the wireless network created by the AEBSn ... not extend it.
The following would be the basic setup steps for extending a wireless network:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

How to extend notification method to os command in OEM

Hi All,
I am using OEM 12c R1 and want to use an os command as notification method. I wrote a shell script and placed the script on the machine where I have installed OEM. Now I provided the script with its absolute path in the text field of os command and tried creating a new notification method however while testing I got the following error
"Test failed: Error calling /<source_folder>/alertlog.sh: Cannot run program "/<source_folder>/alertlog.sh": java.io.IOException: error=2, No such file or directory (<host_name>:<port>_Management_Service)"
Can anyone please tell me where I should keep the os script to get read and run by oms? or what could be the correct steps of extending nitification methos as os command?
Thanks in Advance!!

From:
http://docs.oracle.com/cd/E25054_01/doc.1111/e24473/notification.htm#autoId12
"You must deploy the OS Command or Script on each Management Service host machine that connects to the Management Repository. The OS Command is run as the user who started the Management Service.
The OS Command or Script should be deployed on the same location on each Management Service host machine. The OS Command should be an absolute path, for example, /u1/bin/logSeverity.sh. The command is run by the user who started the Management Service."

Extending IDOC type

Hi,
Iam using the business object BUS20001 (CRMXIF_ORDER_SAVE_M) to create service order in CRM 3.1 system using LSMW. We have an addfiled in the order hence extended the IDOC type (ZCRMXIF_ORDER_SAVE_M02B), creating a new segment and attaching to the IDOC type. When i look into this extended IDOC type in the transaction WE30, all the segments has mapped to a field in the structure CRMXIF_BUS_TRANS. But the newly created segment has no mapping. This unmapped field is not getting updated in the order created.
Do i have to extended the structure CRMXIF_BUS_TRANS when i extend the IDOC type.Please advise if i miss any steps in extending the IDOC type.
Regards
Dhanapal S

Hi Dhanapal,
When there is a change in IDoc structure, you need to re-import in Repository.
Also, in IDX1 transaction delete the existing meta data for the IDoc and import the meta data once again.
Regards,
Uma

Classic Withholding Tax and Extended Withholding Tax

Hi,
What is the difference between Classic Withholding Tax and Extended Withholding Tax.
Regards
RKG.

Hi
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate -
are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type.
When entering a line item, you can enter withholding tax data for each of these withholding tax types.
How To Configure Withholding Tax?
Steps for extended withholding tax :
1. Check withholding tax countries
2. Define Ex. Withholding tax types for invoice postings
3. Define Ex. Withholding tax codes
4. Formula for Ex. Withholding tax calculation
5. Assign Ex. Withholding tax types to Company code
6. Activate Ex. Withholding tax
8. Create a G/L a/C for Ex. Withholding tax
9. Define A/C for Ex. Withholding tax (DBWW)
10. Make changes in Vendor master (XK02)
11. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
12. Activate country version for specific fiscal year position
Path: IMG -> FA -> -> **** -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/content.htm
nagesh

Extend AD Schema and configure Logon Manager

Hi,
i tried to extend schema and configure the logon manager but with no success.
When i extend schema in ESSO Admin Console a successful message appear, but when i check the Active Directory for the objects that should appear, non of them are in there.
Can someone please explain me what im doing wrong, or give me a link where the steps to extend and configure logon manager are explained?
thanks

I,
thanks for the answer.
now the AD is extended successfully.
But i have one more problem, in the agent installed in the server machine de apps appear correctly and the users are synchronized correctly, although in other machine that the agent is installed i cant connect to AD (i think) the apps not appear..
When the window "Connect to Active Diretory" of the agent appear i introduce de credentials : Administrator and pass of the AD administrator. Am i right?
I think theres a problem with the connection with the AD and the machine.
Thanks..

How to extend an existing IDOC!

tell me the steps to extend the existing IDOC !
                                                               Thanks

1>we31(create new segments with fields u want to populate)
2>we30(create an extension idoc type).in we30 u will get to radio buttons.1>basic type 2>extension.click on the extension and then copy the basic type.Now will get all the segmnts .Now add the new segments under the parent segement which needs to be extended.
3>attach the extended idoc type to basic type and message type to tcode WE82.
4>Now u have to search for an exit where u have to write ur code in order to populate the fields which u have extended.Basically u will write in the Function module.Make sure u r writing in the correct exit.Evry messagetype will have a function module.
5>create a project in cmod and activate the function exit.
IDOC EXTENSIONS
Letâs first look at the concept of IDOC extension. SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type. Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
First, letâs determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
     Use transaction WE30 or from WEDI go to Development -> IDOC types.
     Enter ZDEBMASX for Object Name.
     Choose Extension Type.
     Click on Create.
     You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
     You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
     You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
     For 4.x, press Create after placing the cursor on segment E1KNVKM.
     You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
     Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
     Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
     For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
     Click on Segment Editor.
     On the next screen, click on Create.
     Enter a development class for the object. Enter.
     This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
     Enter these three columns for all 12 fields. Save.
     Click on Generate/Activate, F3 to step back.
     From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save.
     Save again to store the descriptions of the segment, F3 to step back.
     Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
2. Create an IDOC Type.
The next step is to create an IDOC type by associating the extension type that you created with the Basic IDOC type. This is a simple process:
     From transaction WE30 or WEDI go to Development -> IDOC Types.
     Enter ZDEBMASZ for Object Name.
     Click on IDOC Type.
     Click on Create.
     Enter DEBMAS02 for Basic IDOC type.
     Enter ZDEBMASX for extension type.
     Enter a description.
     Enter.
     You will see a display of the composite IDOC type with all segments, including Z1SADRX (see Figure 3).
It is possible to associate only one extension type with a Basic IDOC type for a given IDOC type. However, you can have multiple new segments in an extension type.
3. Link IDOC Type to Message Type.
The next step is to link the new IDOC type to its corresponding message type. This is important, because this relationship is referenced in the partner profile parameters where you specify the message type and IDOC type to be used for that particular representative system. To link the message type:
     Use transaction WE82, or from WE30, go to Environment -> IDOC Type / Message Type, or from WEDI go to Development -> IDOC Type -> Environment Î IDOC Type / Message Type.
     Click on Display <-> Change.
     Click on New Entries.
     Enter DEBMAS for message type.
     Enter DEBMAS02 for Basic IDOC type.
     Enter ZDEBMASX for extension type.
     Enter your SAP R/3 release number for Release.
     Save.
This data is stored on the EDIMSG table and is accessed by several ALE processes to relate the message type to the IDOC type.
4. Check the IDOC Type.
Before checking the IDOC type for consistency, it is important to perform another step that releases the extension type to the IDOC type:
     From WEDI go to Development -> IDOC Types -> Extras -> Release Type, or from transaction WE30 go to Extras -> Release Type.
     For the Object Name ZDEBMASX and radio button Extension Type, click Yes.
     The extension type has now been "released."
You canât edit the extension type once itâs released. To cancel the release for further editing or deactivation, go to WE30 Î Extras Î Cancel release. The final step in the IDOC extension process is checking the validity of the IDOC type:
     From transaction WE30 or WEDI go to Development -> IDOC types.
     Enter ZDEBMASX for Object name.
     Click on Extension Type.
     From the Development Object menu select Check.
     Repeat the operation for IDOC type ZDEBMASZ.
     A check log will be generated for each run with details of correctness or errors (see Figure 4).
In some situations it is possible to receive errors during the check process, especially segment length errors. The incorrect IDOC segment can be repaired and corrected by executing program RSEREPSG. This program checks the formal consistency and repairs incorrect segments. In test mode it will generate a log of formal correctness for the specified segment only. For the program to repair segments in normal mode, the underlying IDOC structures (DDIC structures) must be active. This program rectifies the lengths of the DDIC structures and not the fields themselves. RSEREPSG can also be used to change the person responsible for the object and the release flag.
Menu paths may vary slightly depending on the release/version of SAP R/3, but the procedures and the principles are the same.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application. It may be necessary to enhance an ALE function module even in situations where an IDOC extension has not been performed if the IDOC data being passed to and from the application requires modifications. The following approach applies to both situations.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
     For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
     From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
     Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
     Execute transaction CMOD.
     Enter name of project, say CSTMAST1.
     Click on Create.
     Enter a description of the project.
     Save.
     Click on SAP Enhancements.
     Enter VSV00001 for Enhancement.
     Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1.     The point in the ALE function module where the function exit occurs
2.     The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
     From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
     Find Customer Function 001.
     Double-click on 001.
     The function EXIT_SAPLVV01_001 will be displayed.
     Double-click on INCLUDE ZXVSVU01.
     You will be asked to create a new include object. Proceed as desired.
     Enter code (as in Listing 1).
     Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
     Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
     Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
Error handling is a very important consideration when making enhancements to inbound ALE/EDI objects. In ALE and EDI inbound processing, workflow is used for handling errors at different levels such as technical and application. If workflow has been configured for the interface, the error messages and workflow items flow to the inbox of the named recipient(s).
It is also critical to enhance the workflow that handles notifications of the inbound ALE/EDI process. In most scenarios this is not a very difficult task because SAP lets you influence the workflow parameters and messages in function exits (customer functions). You typically do this using flags and message codes to trigger certain workflow actions. If you conform to the status codes and flags stipulated for workflow processing, the enhancement could be error-free and seamless. In the case of an inbound IDOC with an extension, you should populate the EDIDC fields IDOCTYP (new IDOC type) and CIMTYP (extension type) accordingly.
IDOC REDUCTIONS
When distributing or communicating master data to other systems, the volumes of data transmitted over communication lines may be large, resulting in performance problems and/or excessive usage of resources such as disk space and bandwidth. Careful scrutiny of the master data Basic IDOC type may reveal that many of the segments are redundant or are simply not being used. If this is true, then the basic IDOC type is a candidate for a technique known as IDOC reduction. The R/3 System provides the ability to eliminate unused segments and irrelevant segment fields from the Basic IDOC type. This procedure is relatively simple and easy to implement. IDOC reduction is available for only a few message types such as DEBMAS, CREMAS, GLMAST, MATMAS, and certain POS messages.
When performing an IDOC reduction, a new message type is created based on an existing message type. The IDOC segments associated with that message type are proposed for editing. Mandatory segments of the IDOC type canât be excluded. By default optional segments are excluded, but you can choose to include an optional segment and only certain fields in the optional segment. If you have extended the Basic IDOC type and created a new IDOC type associated with a corresponding message type and you are creating a new message type (view) based on it for purposes of IDOC reduction, then the enhanced IDOC type is presented for editing along with the additional segments.
Letâs use the Vendor Master IDOC type CREMAS01 as an example to demonstrate IDOC reduction. Message type CREMAS is used for communicating Vendor Master data to other R/3 or external systems. If you browse the IDOC type CREMAS01 youâll see that it has 10 segments, with E1LFA1M being a mandatory segment (see Figure 6). To reduce this IDOC type:
     Use transaction BD53 or from SALE go to Distribution scenarios -> Master data distribution -> Reduce IDOC type for master data.
     Enter ZCREMS for View (message type).
     Click on Create.
     You will see a pop-up box. Enter CREMAS in the Derived From field. Enter.
     Enter a description. Enter.
     You will see a list display with segment E1LFA1M in green and a * symbol. The symbols used in IDOC reduction are: * for mandatory, 1 for selected, - for deselected, x for core selected, and the Î.â for core not selected. The corresponding elements are highlighted in green, white, red, violet, and gray, respectively.
     Expand all trees. You will see nine other segments in red.
     Place your cursor on the E1LFB1M segment for company code data and click on Select. It turns white with a 1 symbol.
     Double-clicking on it will display a list of fields. You can select fields that you require (see Figure 7).
     Note that if a child segment is selected, its parent is also selected automatically in order to maintain the hierarchical integrity.
     After youâve selected the segments required and its fields, save.
     From the main screen, click on Activate.
Activating the new message type ZCREMS will turn on the message type change pointer generation on a particular client. While creating a reduced IDOC type message is a client-independent activity, activation is client-dependent. An entry is created in table TBDA2 for a specific message type in a specific client and is activated. To delete this message type, you need to deactivate it from all clients on that instance. These message types are transportable.
Now that weâve created a new message type for a reduced IDOC type, letâs build the rest of the ALE configuration to work the interface with the following steps:
     Define a logical system to represent the other R/3 or external system.
     Configure the Customer Distribution Model to send message ZCREMS to this logical system.
     Define a port, if needed, for this system.
     Define a partner profile based on the logical system and maintain its outbound parameters. Make sure to use ZCREMS as the message type and CREMAS01 as the IDOC type.
     Use transaction BD14 or execute program RBDSECRE or from BALE go to Master Data -> Vendors -> Send. Then, to specify a vendor or range of vendors and enter message type, go to ZCREMS and its target logical system.
     Execute.
You can also capture changes to Vendor Master data and create IDOCs by executing transaction BD21 or program RBDMIDOC. Use transaction WE02 or WE05 to view the IDOCs created as a result of the preceding test. Notice the segments populated and the basic segments that are absent due to the reduction. You will find that the fields deselected from the segments have a value of /. This is equivalent to a null value. Eliminating segments may result in saving resources, while eliminating fields may not, unless the data is compressed. Also, if you look at the master data ALE function modules for these few message types, youâll see that a function module IDOC_REDUCTION_FIELD_REDUCE is called for every segment being populated. This in itself may be an overhead. It is important to weigh the pros and cons before implementing IDOC reduction. Of course, in certain cases, it may be a necessity for adjustment of data.
Enhancing ALE/EDI and IDOC extensions and conducting IDOC reductions is fairly simple. However, before proceeding with these tasks, you must carefully research the many options available in ALE and develop the best design for your business scenario.
IMPLEMENTING BAPI WITH ALE: A SAMPLE SCENARIO
Business application programming interfaces (BAPIs) provide an interface to Business Objects in the R/3 System. Business Objects are based on object-oriented technologies and represent an application objects, such as an address or a sales order. This next section prototypes an ALE interface that incorporates BAPI methods. When weâve finished, you should have a good idea of how easy it is to incorporate BAPIs with ALE and of how beneficial leveraging the 1000+ BAPIs available in the R/3 System can be when you want to interface with R/3 application objects.
Letâs start with a brief overview of SAP Business Objects and BAPIs.
SAP Business Objects. An SAP Business Object envelopes R/3 data and business processes while making the details of data structure and access methods transparent to a user interfacing with it. It consists of four layers: kernel, integrity layer, interface layer, and access layer. The kernel represents the R/3 data and its attributes. The integrity layer represents the business logic of the object and contains the business rules that govern the values of the kernel. The interface layer describes the interface mechanisms to external applications. BAPIs belong to the interface layer. The access layer represents communication methods, such as COM/DCOM, RFC, and CORBA.
SAP Business Objects and their details are stored in the Business Object Repository in the R/3 System.
BAPIs. BAPIs are "methods" of SAP Business Objects and represent their interface layer. BAPIs are essentially function modules in the R/3 System that are capable of invoking remote function calls (RFCs) for the purpose of communicating data through the function moduleâs import/export parameters and internal tables. BAPIs do not invoke screen dialogs. Like blackbox technology, BAPIs do not require the programmer or user to know the coding and implementation details of the interface to the Business Object. The user simply invokes the BAPI with its appropriate parameters and values in order to accomplish a task such as getting a list of materials from an external system or sending a list of contact person details to another system.
BAPIs can be executed synchronously or asynchronously while using the ALE communication layer for exchanging data. Typically, with asynchronous BAPI communications, an ALE IDOC is used to distribute the data. As we will learn in the following prototype, the ALE distribution model has to be configured in order to use the appropriate BAPI methods for the RFC destination that provides a gateway to the external system (R/3 or other). For this type of communication, an ALE IDOC interface must exist. If a particular BAPI (SAP-delivered or user-written) does not have an ALE IDOC interface, the interface can be generated using certain R/3 tools and procedures.
BAPIs are fast becoming the communication standard for exchanging data between business systems (including R/3). SAP Business Objects conform to Open Application Group (OAG) standards, and BAPIs support the COM/DCOM and CORBA guidelines. ALE and BAPIs is the strategic direction for all SAP interface technologies and will replace SAPâs traditional techniques in the future.
A BAPI/ALE PROTOTYPE ÷ CONTACT PERSON DETAILS
In the previous section, we learned how to enhance ALE functionality using the example of Customer Contact Person details. We extended the IDOC and enhanced a customer function with a few lines of ABAP code to achieve the additional functionality of distributing contact person details. While this was an exercise to learn IDOC extensions and customer-function enhancements, we can prototype a BAPI/ALE interface in this section that accomplishes the same purpose ÷ the distribution of contact person details. In release 4.5 of the R/3 System, message type ADR3MAS and IDOC type ADR3MAS01 have been provided to distribute contact person details with the aid of a BAPI method. The steps weâll walk through in a moment will illustrate the ease with which we can integrate BAPIs with ALE to get an interface up and running for many standard business scenarios or specialized cases that were not supported by ALE prior to the advent of BAPIs.
The ADR3MAS is considered to be a master data message type because it complements business master data, such as customer and vendor master. It is now supported by change document functionality, implying that change pointer mechanisms can be used to capture and then distribute changes occurring to contact person data using ALE IDOCs. The function module that accesses the R/3 data is a BAPI. In the R/3 System, contact person address is a business object. If we search the Business Object Repository (via transaction SWO1) with the keyword "address," for example, we will find business object BUS4003 under Cross-Application Components -> General Application Functions -> Address Management -> BUS4003: Address of a person in a company. This is the business object that pertains to our scenario, and a drill down on it reveals the details of the object, including its methods (see Figure 8). The method that would be of interest to us is "AddressContPart.SaveReplica." For your information, the corresponding BAPI function module is BAPI_ADDRCONTPART_ SAVEREPLICA in the function group SZAM.
Having gathered this information, Letâs build the outbound interface:
     Create a logical system (via transaction SALE) to represent the receiver system.
     Configure the distribution model. From transaction SALE, use option Maintain Distribution Model to create a model view for this scenario. Specify the sender system (the base logical system for the client you are working in, such as the logical system that has been assigned to that client) and the receiver system (the logical system). After positioning the cursor on the receiver system, click on Method and enter AddressContPart in the Object Name field on the panel that pops up. Also enter SaveReplica in the Method field on the pop-up panel. Enter and save the Distribution Model (see Figure 9).
     From transaction WE20, create a partner profile based on the logical system for the interface. Use message type ADR3MAS and IDOC type ADR3MAS01, with an appropriate port.
     Activate the change pointer for message type ADR3MAS. From SALE go to Set up Data Distribution -> Master Data Distribution -> Activate Change Pointers. Ensure that change pointer generation is active at the general level as well.
Now that weâve completed the configuration, letâs test the interface. The purpose of this test is only to create outbound IDOCs. Appropriate settings, such as port definitions and RFC destinations, can be made as required for purposes of communicating the IDOCs to the external system (or other R/3 system).
From the Customer Master or Vendor Master screens, create or make changes to contact person address. This should result in the creation of change pointers. (Check table BDCPS for change pointer entries with message type ADR3MAS.) After this, from transaction BALE go to Periodic Processing -> Process Change Pointers, enter ADR3MAS as the message type, and execute the transaction. This should result in a message indicating the number of master IDOCs created. Use transaction WE05 to display the IDOCs.
THE ALE AUDIT
In this section letâs take a look at the prototyping of the ALE Audit. ALE Audit is a powerful mechanism for verifying the success of ALE transactions/messages sent to another system. As you will see, implementing ALE Audit is not only easy but also very beneficial, because it facilitates the monitoring and tracking of transactions across systems while providing an entry point into error handling.
Program RBDSTATE is used for audit confirmation of ALE transactions between two R/3 systems; in other words, it indicates the success or failure of the ALE transaction on the target system. The program reports the status of the transaction on the target system back to the sending system. This process also serves as an interface itself from the target system to the sender system, facilitated by message type ALEAUD. In the following section, weâll look at the various steps needed to set up ALEAUD and execute program RBDSTATE.
SETTING UP ALEAUD and EXECUTING PROGRAM RDBSTATE
Letâs consider two different R/3 systems with base logical systems BK1CLNT010 (sender system) and BK2CLNT020 (target system). Assume that you are distributing characteristics master (message type CHRMAS) from BK1CLNT010 to BK2CLNT020. When you send CHRMAS02 IDOCs from BK1CLNT010, their status is 03 (data passed to port OK) if they were successfully externalized from the sender system. If the IDOCs were received and processed successfully on the target system, the status of those IDOCs on the target system is 53 (application data posted). Remember that you have to create a partner profile for BK1CLNT010 on the target system in order to receive the CHRMAS messages. The inbound parameters of BK1CLNT010 partner on the target system have CHRMAS as the message type and CHRM as the process code.
You now need to configure BK2CLNT020 to send ALEAUD messages to BK1CLNT010, the sender system. And you also need to configure BK1CLNT010 to receive those messages in order to update the status of CHRMAS IDOCs sent to the target system:
     On the target system BK2CLNT020, configure the distribution of message flow of type ALEAUD to logical system BK1CLNT010.
     Create filter object using object type MESTYP with a value of the message type for which you need audit confirmation. This message type must flow from the sender, BK1CLNT010 to BK2CLNT020. In this example, the value of the filter object type MESTYP is CHRMAS, message type for characteristics master. Save the distribution model. Use transaction BD64 to do this.
     On target system BK2CLNT020, create an RFC destination with name BK1CLNT010. Choose the relevant connection type and enter the logon parameters and password for the R/3 system on which BK1CLNT010 resides. Use transaction SM59 to do this.
     On target system BK2CLNT020, generate partner profile and port definition using transaction SALE, go to Communications -> Generate partner profile. Specify the customer model as described. Check the partner profile to ensure outbound parameter entries for message types ALEAUD and SYNCH.
     On sender system BK1CLNT010, create a logical system for BK2CLNT020. Create a partner profile for logical system BK2CLNT020 with inbound parameters for message type ALEAUD, with process code AUD1.
     Distribution of customer model on BK2CLNT020 to BK1CLNT010 is not necessary.
TESTING THE ALE CONFIRMATION PROCESS
Now you are ready to test the ALE audit confirmation process:
     From the sender system, BK1CLNT010, send a couple of CHRMAS02 (characteristics master) IDOCs down to the target system, BK2CLNT020. Make sure that the status of the IDOCs is 03 (data passed to port).
     Check the target system for receipt of these IDOCs. Make sure that they are in a status of 53 (application data posted).
     Execute program RBDSTATE with appropriate parameters. Specify BK1CLNT010 for Confirm to System, CHRMAS for Message type, and date, if necessary.
     Upon successful execution, informational messages will be issued indicating the IDOC number and status of the ALEAUD IDOC. (Note that a single ALEAUD audit IDOC can contain audit messages for multiple application IDOCs. This capability reduces the traffic of IDOCs between the two systems and keeps the overhead of audit confirmations at a minimum.)
     Check the sender system for the receipt of the ALEAUD message. The status of the CHRMAS IDOCs that you sent to the target system must be changed to 41 (application document created in target system).
This completes the test of ALE audit confirmations (see Figure 10 and Figure 11 for IDOC display of target and sender system).
Audit confirmations can play a significant role in the reporting and monitoring of production systems. You can schedule program RBDSTATE periodically on target systems to report back to sender systems. Keep in mind that you need to maintain a sufficient time lag between the sending of application IDOCs to the target system and the execution of this audit program because the application documents need to be posted on the target system. This program can also be accessed from BALE using Periodic work -> Audit confirmation.

Oracle Enterprise Repository post installation steps failed.

Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
     at org.python.core.parser.fixParseError(Unknown Source)
     at org.python.core.parser.parse(Unknown Source)
     at org.python.core.Py.compile_flags(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at org.python.util.PythonInterpreter.execfile(Unknown Source)
     at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
     at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
     at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
     at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
     at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
     at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AM

Hi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh

Extend wi-fi across many acres?

Is it possible to extend a wi-fi network across many outdoor acres? Think hundred-acre cattle yards. I know very little of networking, but thinking power and "repeaters" could possibly do it? Of course, we don't have power out to all corners of these yards. Is there now some sort of solar panel with battery that a router could plug into? And lastly, even if we could get power out to these places, doesn't signal strength (or at least speed) diminish the farther you go from the office?
I'm just trying to detemine if it's realistic to "wi-fi up" an entire cattle yard, or if it's too difficult/not very realistic (in which case we'd have to write apps to be disconnected and just communicate with the server whenever close to the office).
Thanks for any info.

but i always thought all airport devices had to be connected to an existing network via ethernet?
Now you know that this is not the case.
Apples advice & the instructions all say you have to connect via ethernet
Not sure exactly what you are referring to here. For example, this well known popular Apple support article....with specific steps to extend a network wirelessly......has been around for about 5 years in its present form, but it is a revision of another support document that was available long before that.
http://support.apple.com/kb/HT4145
Is this something that the newer airport devices now support?
No, all AirPort devices for the past 8 years or so have supported wireless extension. But, that does not mean that any device will work any other device...... you have to have devices from similar generations to insure compatibility.

Steps to extend HzPuiPersonProfileVO

Similar Messages

Maybe you are looking for