Steps to Extract data from Source System
Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.
Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay
Similar Messages
-
Error in Process Chain while extracting data from source system
Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada. -
Error occured in the data selection while extract data from Source system
Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With errorHi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star -
Problem in extracting data from source system
HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number... -
Error during extraction data from APO system
HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
GuruHi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM -
How to upload Transaction data from source system to BI 7.0
Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhuHi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses. -
BO DI for extracting data from legacy system to SAP BW 7.0
Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
PriteshThere are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM -
Steps to extract data from teradata to bw
steps to extract data from teradata to bw
Thank you Roberto and Jerome!
1.as per my knowledge my client has teradata datawarehouse on oracle database is it possible. and also can he use cognos for reporting?
2. now teradata data can be only extracted to bw or also to r/3?
3.and after extracting the entire historic data where can i store?is it in 1infocube or store in different cubes related to modules?
if my questions are wrong please clarify them? -
How to extract data from legacy system to source file
Hi can anyone tell me the procedute to copy data from legacy system to source files....this data needs to be moved to base tables
can any one tell me the procedure and any sample code i,e any example
Thanks & Regards
KrishYou should post your thread to ...:
http://forums.oracle.com/forums/forum.jspa?forumID=183
providing all necessary info......!!!!
Greetings...
Sim -
Extracting data from Legacy system - How do we get the data into a normaliz
Hi All,
Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
If it is from ERP system we would have created a Functional Module.
Please advice me on how to get the data to BI end from those tables in Legacy system.
Thanks in advance.Anil:
I recommend following Ralph Kimball's EDW data modeling principles.
Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
Good Luck.
MP. -
Example to help me see the steps in extracting data from IDES R3 to BW?
Hello folks,
I have some documents on extraction but I have not been able to step through successfully.
Can you step me through the process with a simple example:
1. identify an object(table?) on R3; provide typical tcode to see the data in this source
2. steps see the data in this R3 table
3. steps to create an extractor to pull the data we saw in step 2.
4. Steps to go through so that I can see this data in BW
I will appreciate a real example which will help clarify some difficulties I have in extracting data from R3 to BW.
Thanks1. To see data in the extractor, activate the data sources first and then execute RSA3. For LO extractors, in addition to activating the data sources, fill the set up tables and set the delta process and then execute RSA3.
2. To view data in source tables, you must know the source tables. The best way to find out the source table from where the extractor picks up data, go to help;sap.com - BI content. In the help pages, you will find the source tablles. Once you get the source tables, go to Se16, type the table name and execute. You wil see the data.
3. If you wish to create extractor from the source table, go to RSO2 ( O as orange), choose which data source you wish to create ( master data, texts, hierarchies, transaction data). The steps are explained in the following document. Pl follow the link:
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044&_SCENARIO=01100035870000000202
Or send me a note to my email and I can send this document to you.
Ravi Thothadri
[email protected] -
Error Occures while loading data from Source system to Target ODS
Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141 -
SSIS 2014 - Best way to use parameters to extract data from sources
Hi,
Is there any way besides SQL COMMAND FROM VARIABLE that I could use to extract data from Oracle \ SQL Server tables that filters the amount of data?
For instance, I want to extract in all sources data beyond 2007 so I wanted to use this year as a parameter in all OLEDB sources I will be using.
Thank youHi Pedro,
Based on my research, the Microsoft OLE DB provider for Oracle and Oracle Provider for OLEDB does not allow parameterized queries in OLE DB Source. So the best method to achieve your requirement is still using SQL COMMAND FROM VARIABLE option as Data access
mode.
Considering construct your query in a variable which you can include your parameter dynamically with another variable and set the variable properties "EvaluateAsExpression" to true. In the Expression Property set the value to:
"select * from test
where Col1='" + (DT_WSTR,100) @[User::para] +"'"
The following two similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/97f23ef5-35ac-466e-87d9-69edac2525f9/ssis-oledb-source-problem
https://social.msdn.microsoft.com/forums/sqlserver/en-US/32a70752-adab-4180-8b6d-f6100b3e356c/pass-variable-for-ole-db-source-with-connection-to-oracle
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
File-File - Need to extract data from source file name???
Hello Experts,
I have a unique situation. In my file to file scenario, the source file name is of the format XYZ_yymmddHHMM.dat. there is field in the target file which has to filled with the date that is there in the file name of the source file (yymmdd). How can this be achieved? Normally we do the other way round using vaiable substitution where we can name a file depending on the value in any of the target field structure.
Please help.
Regards,
YashHi,
please prepare the udf with the following code.
i mean, dynamic configuration concept.
where u get the file name, then use substring function to capture date from right side.
//write your code here
// getFileName User Defined Function
// function to create name of output file
String filename;
filename = strFile;
try {
// initialize DynamicConfiguration for create file with given name
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
//create file with the specified name
conf.put(key, filename);
} catch (Exception ex) {
return filename;
warm regards
mahesh. -
Transfering data from source system to bw
I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)
Maybe you are looking for
-
Error While Configuring DB adapter in Admin Server
Hello All, i am unable to configure the DB adapter 's settings in the Console. DBAdapter->Configuration->outbound Connection Pools -> There was an error reading the descriptor files. Errors occured while initializing a new deployment plan. [J2EE Depl
-
Hi all, I HAVE FM IDOC_OUTPUT_ORDERS AND FROM THERE I HAVE EXIT_SAPLEINM_002 IN WHICH I HAVE AN INCLUDE ZXM06U02 IN WHICH I HAVE CODE WRITTEN . cAN ANYBODY TELL WHEN THIS INCLUDE IS GOING TO GET TRIGERRED . PLEASE LET ME KNOW IF YOU NEED ANY DETAILS
-
Problems with installing the Creative cloud update - (Error code: 43). Anyone had this problem and found a fix for it?
-
Increase shared memory by IGD (intel HD)
when will the shared memory for intel HD graphics processor can be increase more than 256MB? some motherboard with some brand can assign until 1GB of RAM to the integrated graphic. future BIOS development should focus on this matter. thank you azuan
-
Reports 6 - Attached Libraries.
Am currently developing a report using Oracle Report Builder 6.0 - which has an attached library containing a specific program unit. When compiled on my machine (win2000), no errors are encountered. But during runtime, we receive the error "ORA-06508