Steps to install 10.5.6 from 10.4.11

Please advice steps on how to install to 10.5.6 (purchased disk from 1-800 apple) from 10.4.11.
I don't want to mess/loose up anything - so please let me know how to do it. I also have 1.5 gyg of ram is that enough?
thanks in advance for your help,

teit wrote:
Please advice steps on how to install to 10.5.6 (purchased disk from 1-800 apple) from 10.4.11.
If you don't mind spending a little extra money (US$5), you might find useful the electronic book "Take Control of Upgrading to Leopard":
http://www.takecontrolbooks.com/leopard-upgrading
It's listed as US$10, but there's a 50% discount through the end of the year to celebrate the 7th anniversary of Take Control Books.
I have no relationship with Take Control Books other than that of a customer.
I'd also recommend several other things:
- Have a current full backup before you install Leopard.
- Use Disk Utility to do a "verify disk" operation before you upgrade. If that shows errors, use one of the several methods to repair the disk.
- Use Disk Utility to do a "repair permissions".
I also have 1.5 gyg of ram is that enough?
That should be enough.

Similar Messages

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Downgrade windows 8 enterprise to windows 7 enterprise under volume license and steps for installing windows 7 enterprise.

    How to downgrade from windows 8 enterprise to windows 7 enterprise under volume license? and what are the steps for installing windows 7 enterprise?

    The link provided by v-yamliu works good.
    Steps for installing Windows 7 Enterprise can differ based on the method of installation.
    Windows 7 Enterprise, being an enterprise product, is usually installed on PCs count of 20 and above. Also, organisations usually modify the standard installation image to suit the organisation's needs and policies. In doing so, they define the way the Enterprise
    edition can be installed. They can be ZTI (Zero Touch Installation) or LTI (Lite Touch Installation). The following links will be helpful in this case:
    http://technet.microsoft.com/en-us/library/dd919178(v=ws.10).aspx
    http://technet.microsoft.com/en-us/library/dd919179(v=ws.10).aspx
    If the above case is not true and only a standard image is being used, you can perform clean install as mentioned by v-yamliu. The following link will be helpful:
    http://windows.microsoft.com/en-us/windows/installing-reinstalling-windows#1TC=windows-7
    Balaji Kundalam

  • Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

    Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
    Thanks in advance.

    If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
    1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
    2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
    3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
    Also see
    MOS Doc 1645862.1

  • I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    That's easy.
    2 methods:
    1. Change the Startup Disk in System Preferences, then restart:
    2. Hold down the "Option" key while starting or restarting the Mac. Then chosse the partition that you want to startup from.
    The 1st mehtod is the quickest, because you don't have the additional step of choosing the drive. Plus, whatever you have selected in System Preferences becomes the default startup drive.

  • Problems installing Illustrator and Indesign from CS3 suite

    I am trying to install Illustrator and Indesign from CS3 suite.  Previously I had been running a trial version on my Mac, and now am trying to install the suite from the original install discs.  I have gone through the process of uninstalling all of the Adobe programs and then reinstalling.  When the install disc loads up and I get to the point where it lists the programs to install, in the top box Illustrator and Indesign are listed as already being installed and have no option to install them.  When I search my computer there are no Illustrator or Indesign applications.  I am able to reinstall the rest of the suite and it seems to work fine but can't seem to figure out what step I'm missing as far as reinstalling Illustrator and Indesign are concerned. 

    I haven't tried doing it on Vista but I would recommend looking for 
    Adobe clean up programs.  The problem I had was that the computer had 
    a trial version and then I tried to install the full version and it 
    wouldn't let me install illustrator because there were some random 
    illustrator files that conflicted with the installation process.  I 
    ran clean up program and it removed all adobe files.  Then I 
    reinstalled photoshop.  Before you start running clean up programs 
    make sure you back everything up.  Good luck

  • Firefox doesn't open any pdf document. I have installed anything is necesary from adobe & have played hardly videos from youtube because of flash player

    I have tried to see in browser firefox or downloaded many pdf-s but he show a blank page, I have installed latest version from adobe reader and Nitro pdf download add on for firefox, but no result. What can I do? my firefox version is 22
    Also another problem is adobe flash player who use my CPU at maximum. I have latest version, 2 GB RAM and 2gh CPU Windows 7. Where can I set to not use more than 75% from CPU ?
    Thanks

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • [How - to] Install in a click from AUR webpages

    Here I little hack I coded to install packages directly from the AUR frontend.
    Needed:
    - yaourt
    - Firefox with greasemonkey (https://addons.mozilla.org/addon/748) or any greasemonkey-scripts accepting browser.
    Steps:
    1. Create a small bash script called aur_opener.sh containing the following code:
    #!/usr/bin/env bash
    gnome-terminal -x /usr/bin/yaourt -S ${1//aur:\/\//}
    2. Make the script executable
    3. Open about:config in Firefox and add the following variable:
    network.protocol-handler.app.aur
    with value:
    yaourt
    4. Install the greasemonkey script AURlizer (http://userscripts.org/scripts/show/61015).
    5. Visit any page on the AUR db. A new symbol [↓] will appear next to the package name. Click on it and you will be asked which program to use. Point Firefox to wherever aur_opener.sh is. install!
    Note.
    From now on, every time you click on a link like the following: aur://pkgname yaourt will start.
    Enjoy.
    PS
    (Obviously, it would be very easy to implement this directly into yaourt / the AUR db )
    Last edited by crocowhile (2009-11-01 17:43:38)

    One click away from disaster... yaaaah.
    Nice job figuring out though.  If only I could one click hot dogs.
    Last edited by Gen2ly (2009-11-02 10:08:06)

  • Need detail information, steps would be nicer, to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Need detail information, steps would be nicer,  to upgrade from Exchange 2003 to Exchange 2010 to setup in test system first then try on production, since not much room for downtime, thanks bekir

    Hi,
    Overview of the upgrade progress from Exchange 2003 to Exchange 2010 including the following steps:
    Installing Exchange 2010 within your organization on new hardware.
    Configuring Exchange 2010 Client Access.
    Creating a set of legacy host names and associating those host names with your Exchange 2003 infrastructure.
    Obtaining a digital certificate with the names you'll be using during the coexistence period and installing it on your Exchange 2010 Client Access server.
    Associating the host name you currently use for your Exchange 2003 infrastructure with your newly installed Exchange 2010 infrastructure.
    Moving mailboxes from Exchange 2003 to Exchange 2010.
    Decommissioning your Exchange 2003 infrastructure.
    For more details, please refer to this following document.
    http://technet.microsoft.com/en-us/library/ff805040(v=exchg.141).aspx
    Best Regards.

  • What are the correct steps for installing Oracle Entitlement Server SSM?

    Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
    Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
    When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
    Is Admin in the same BEA-HOME as SSM: [default: Yes]:
    Give the location of the Admin: c:\bea\ales32-admin
    Enter the identity directory name which will be used: [default: CoESSM_dir]:
    Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
    Checking if default ARME port is free: 8000
    Generating policy files based on templates ...
    Checking if SSM instance already present
    Checking to see if SSM ARME port is free.
    Checking JDBC parameters...
    Checking to see if asipassword was run...
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
    I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

    Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
    If yes, what are the correct steps of installation ?
    I am getting the errors while configuring the Java SSM.
    Is Admin in the same BEA-HOME as SSM: [default: Yes]:
    Give the location of the Admin: c:\bea\ales32-admin
    Enter the identity directory name which will be used: [default: CoESSM_dir]:
    Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
    Checking if default ARME port is free: 8000
    Generating policy files based on templates ...
    Checking if SSM instance already present
    Checking to see if SSM ARME port is free.
    Checking JDBC parameters...
    Checking to see if asipassword was run...
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
    2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
    I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

  • Have new computer want to install CS5 and deactivate from old. but need an older verison as cs5 is an update

    I have a new computer , want to install CS5 and deactivate from old. Problem is my CS5 is an upgrade and needs a older version of Elements which I no longer have. Any suggestions?

    you don't need the previous version that was upgraded.  you just need the serial number of the previous version.
    but, if you want the previous version:
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Steps to install SAP 4.7 EE with MS SQL 2000: URGENT

    Hi all Basis Guru's
    We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
    I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
    I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
    So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
    Also is it neessary for me to install the SP3 for Ms SQL 2000.
    Reward points for sure...
    Plz do help me in this as,  this task has to be completed by 03-08-07 EOD.
    Million Thanks in Advance
    Regards
    Hari Haran.V

    Hi Juan,
    I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
    but i get an error during the installation of the CI...(this is happening at the time of  <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
    Here is the detailed LOG of the error.....
    INFO 2007-08-02 18:50:39
    Processing of host operation t_HostInfo_SHARED succeeded.
    INFO 2007-08-02 18:50:47
    The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
    INFO 2007-08-02 18:51:13
    Successfully connected to PDPLMAIN\PDPLMAIN
    INFO 2007-08-02 18:51:13
    Executing check Product Version ...
    INFO 2007-08-02 18:51:13
    Script "Product Version" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Product Patch ...
    INFO 2007-08-02 18:51:13
    Script "Product Patch" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Product Edition ...
    INFO 2007-08-02 18:51:13
    Script "Product Edition" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Collation ...
    INFO 2007-08-02 18:51:13
    Script "Collation" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check SysAdmin Rights ...
    INFO 2007-08-02 18:51:13
    Script "SysAdmin Rights" successfully executed
    INFO 2007-08-02 18:51:13
    Successfully connected to PDPLMAIN\PDPLMAIN
    INFO 2007-08-02 18:51:13
    Executing check Database existance ...
    INFO 2007-08-02 18:51:13
    Script "Database existance" successfully executed
    INFO[E] 2007-08-02 18:51:36
    Account group="pdplmain\SAP_LDAP" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:37
    Account group="ORA_PD0_DBA" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:37
    Account group="ORA_PD0_OPER" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:49
    Account group="pdplmain\dbpd0ctl" does not exist. <#1>
    PHASE 2007-08-02 18:57:16
    SAP Web Application Server
    PHASE 2007-08-02 18:57:16
    Request common parameters of SAP System
    PHASE 2007-08-02 18:57:17
    Collecting information on database configuration
    PHASE 2007-08-02 18:57:17
    Create operating system accounts
    INFO 2007-08-02 18:57:17
    Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
    INFO 2007-08-02 18:57:17
    Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
    INFO 2007-08-02 18:57:18
    Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
    INFO 2007-08-02 18:57:18
    Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
    PHASE 2007-08-02 18:57:33
    Preparing OS account for MCOD installation
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:36
    Evaluating all 'tNT_RegistryEntries' table rows succeeded.
    PHASE 2007-08-02 18:57:38
    Preparing DBMS-specific environment variables
    WARNING 2007-08-02 18:57:38
    Error 1332 (No mapping between account names and security IDs was done.
    ) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
    INFO 2007-08-02 18:57:38
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:39
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:41
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:42
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:44
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:45
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:46
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:47
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:48
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:49
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:50
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:51
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:51
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:52
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:53
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:53
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:54
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:55
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2007-08-02 18:57:55
    Adapt filesystem
    PHASE 2007-08-02 18:57:55
    Prepare check/adapt SAP instance filesystem
    INFO 2007-08-02 18:57:55
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/prfclog exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0 exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/tmp exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/bin exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/data exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/etc exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
    INFO 2007-08-02 18:57:56
    Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
    INFO 2007-08-02 18:57:56
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:57
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:58
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    INFO 2007-08-02 18:57:58
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    WARNING 2007-08-02 18:57:59
    The specified service does not exist as an installed service.
    ! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
    WARNING 2007-08-02 18:57:59
    The specified service does not exist as an installed service.
    ! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
    PHASE 2007-08-02 18:57:59
    Extract archives
    INFO 2007-08-02 18:58:00
    Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
    PHASE 2007-08-02 18:58:01
    Extract SAP System kernel archives
    INFO 2007-08-02 18:58:01
    Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
    ERROR 2007-08-02 18:58:01
    MOS-01021  PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
    ERROR 2007-08-02 18:58:01
    FJS-00012  Error when executing script.
    Waiting to hear from at the earliest
    Regards
    Hari haran.v

  • Where can I download and install AquaLogic.WCFilter.dll from?

    I have installed Oracle Webcenter's Accelerator for .Net and trying to browse the WSRP webservice
    (http://<MyIIS-Defaultwebsite>/wsrpproducer/1.0/WSRPBaseService.asmx) installed in my IIS but getting the following error.
    [NullReferenceException: Object reference not set to an instance of an object.]
    Com.Plumtree.Remote.Transformer.PTTransformer.HandleRequest(HttpContext ctx) in e:\buildroot\Release\wcfilter\3.1.x\filter\src\Com\Plumtree\Remote\Transformer\PTTransformer.cs:60
    Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e) in e:\buildroot\Release\wcfilter\3.1.x\filter\src\Com\Plumtree\Remote\Transformer\PTTransformer.cs:54
    System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +68
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
    When I dissassembled AqualLogic.WCFilter.dll which I suppose contains PTTransormer class but to my surprise did not find it. Am I looking at the correct assembly for PTTransformer? If so where can I download and install AqualLogic.WCFilter.dll from?
    Thanks in Advance!!
    VJ

    Ignore it, I overlooked.

  • How to install sources for infobject from business content

    Hi,
    I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
    Thanks

    Hi daniel,
    Inorder to  install the business object, you will be require to follow the following steps :
    i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
    ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
    iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
    iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc  as you want.
    v)Now you want to see if there can be some predictive error then go Install  --> Simulate Installation.
    vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your   A-version Material Group will be overwritten by the D-version Material group provided by SAP.
    vii)For ur more understanding lets take the example say  you have  added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now  you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X) 
    Hope it will help. 
    Thanks,
    Deepak Machal

  • Problem installing PS-CS2 upgrade from Version 4

    I upgraded my Photoshop software from Version 4.0 to Version CS2 in July of 2006. At the time, I had an issue installing it and had no problems calling Adobe and having them walk me through a couple extra steps to install the program (because it was a "special" upgrade that was offered from a version earlier than 5.5, which was normally what you had to have in order to upgrade to CS2). So, no problem there, got the program installed.
    Fast forward to this week, when I received a new computer for Christmas (a little early) and I tried installing the software. I called Adobe and they said they can't help me because the software is now out of its "support" time frame and the only way they could help me was if I purchased CS4. I have searched online at Adobe for a couple hours and can't find anything giving me the information I need to duplicate the extra steps I had to take when I initially installed the program 3.5 years ago. I don't use Photoshop a lot but there are a few times when I use it for photos and so upgrading is not something that I want to do at the moment (CS2 is fine for what I need). Is there anyone out there that can help me, or perhaps point me in the right direction with the correct information?

    Are these the extra steps, in this case for CS4, that involve a challenge-response from an Adobe rep?  These same steps could be performed by a keygen, which is why Adobe went to background server activation and blacklisting.  The scenario this quote is from involves upgrading from a promotional Elements that came with a tablet.  The message is from 10/5/09 3:28pm (CDT?):
    "The customer representative asks me to open PS CS4.  It goes straight to the activation page.  I enter my PS CS4 S/N and hit 'Next'.  It goes to the page where it requires the PS Elements version and Serial Number.  The representative indicates that I leave the SN space blank and press Ctrl+Shift and click inside the activation dialog twice.
    It goes to an 'Upgrade Code Entry Dialog' window where it shows a Challenge Code that I had to give to this person on the other side of the phone.
    2 minutes later, this person gives me a 6 or 8 digit code that activates my Photoshop license.  And that was it."
    I am not sure what the equivalent is for CS2 but I think there is some way to get to a Phone Activation thing, which you may have already done, that involves a challenge-response .  The unfortunate part is that it involves an Adobe person, and they've already told you they don't support the older version.
    It's possible you could tell them you are doing a phone activation and not say what version you have and see if they can give you the correct response code, anyway, although it may be version-specific and if I remember changes each time you do it, so may not be valid for more than one activation attempt.

Maybe you are looking for

  • Glance clock screensaver no longer moves around sc...

    After Lumina Black update download my at a glance clock no longer works as a screensaver. It doesn't move around the screen during standby. Will this cause screen burn-in? Why did the update change this?

  • Insert record and return the primary key

    Okay, I need to insert a record into a MSSQL database and return the primary key of that record. Im using the following code which is obviously wrong as I'm getting either 'NULL' or 'com.microsoft.jdbc.base.BaseResultSet@1d520c4' returned depending o

  • How to drop a schema?

    Hi, I need to drop a schema un oracle. can you please provide query and your suggestions? Thanks Sathya

  • Transfering data between FTP Servers.

    Dear Friends, How we can transfer data between FTP servers. Kindly provide me some step by step guide for the complete scenario, I need to fetch the the dats from FT P server and send the data to FTP Server of MDM. How to define Technical and Busines

  • Could anyone explain me what this statements means??Thanks

    Hi, I just reading an ABAP program, found below statement and i am not understand about it...Could you help me?  Thanks!!! it_file-ztext+18(5)  to  it_inbound_file-box_nbr As it_file-ztext is an uploaded text file, i am confusing on the '18(5)'...wha