Steps to restore production server

hi to all
can u please send steps to restore a PRODUCTION server  We are using .AIX,/ORACLE
advance thanks
padma

it all depends on what is your backup strategy.
go at SAP on Oracle and search for Oracle recovery guide
disaster recovery guide at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a975013a-0d01-0010-7c9d-dcfda2e3b566

Similar Messages

  • Steps to Restore Production DB to Test Environment?

    Hi All,
    I encountered a difficulty on restoring a production DB to a test environment on BPC (Microsoft) and would like to seek everyone assistance on how to do it,
    so far the steps that I did,
    1. Installed fresh BPC APP and DB with different set of hostname than prod.
    2. verify the fresh installation BPC APP and DB is working
    3. restore the AppServer DB from production to newly created BPC DB
    4. update record in AppServer in BPC DB to point into this hostname, since restoration of the AppServer DB will point to the production hostname
    5. restore our BPC Database e.g. BPC from production to newly created BPC DB.
    until this step then I hit issue that BPC DB can't be updated, it able to load the template but the unable to update the record.
    any pointer on how to fix this error?
    Thank you,
    Regards,
    Ura

    Hi Ura,
    first of all I see you have a lot of opened questions. Please remember that is your duty to close the discussion when solved showing the "corrrect answer" this will help in future other users with same issue, see please How to close a discussion and why
    Regard to the question you should give more informations about your systems and bpc version installed on these, in the meanwhile you can look at these linkw about backup to verify if they give you a hint.
    How to automate backups on BPC for Microsoft and
    Best Practices for Backup on BPC for Microsoft
    Regards
         Roberto

  • Restoring Production Server on to Development Server

    Hi,
    I am new to SharePoint. To get the look and feel of the production site on to the development site I did a force backup to the development site. Since then not sure of the reason I am unable to create any site collections. Please help me to figure out the
    issue. Is it because of the restoration the content database is pointing to the production on which I don't have any access. Please suggest
    Regards,
    Satish
    Sathiish Reddy

    When we ran the above mentioned command , the step 3 failed and checking in the log file displayed me the below error
    03/18/2015 13:15:36  9  WRN            Failed to add the service connection point for this farm
    03/18/2015 13:15:36  9  INF            Entering function StringResourceManager.GetResourceString
    03/18/2015 13:15:36  9  INF              Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
    03/18/2015 13:15:36  9  INF              Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection Point in the current Active Directory
    domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
    03/18/2015 13:15:36  9  INF            Leaving function StringResourceManager.GetResourceString
    03/18/2015 13:15:36  9  WRN            Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and
    that you have rights to write to it.
    System.UnauthorizedAccessException: Access is denied.
       at System.DirectoryServices.Interop.UnsafeNativeMethods.IAds.SetInfo()
       at System.DirectoryServices.DirectoryEntry.CommitChanges()
       at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
       at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
    03/18/2015 13:15:36  9  ERR            Task upgrade has failed with an unknown exception
    03/18/2015 13:15:36  9  ERR            Exception: System.ComponentModel.Win32Exception (0x80004005): Access is denied
       at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
       at Microsoft.SharePoint.Administration.SPTimerServiceInstance.GrantPermissionToReadMetaBase()
       at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    Sathiish Reddy

  • Building Temp SAP Production Server using DB Restore Method

    Dear Gurus,
    we are underway of a hardway migration of HP-UX/Oracle 10.2/4.7R3
    This is my first of a kind project. We are currently underway of moving a client production server to our site..... we are using db restore method to build the sap system. we have already received the online  backup tapes from the client along with the corresponding logs.
    I am incharge of restoring the database once the unix team completes the fille system restore. i will really appreciate if the more experienced people among us can give me a quick run down of how thsi process shoudl run, what kind of steps to start with.
    or important sap links for this procedure.
    Thanks and Regards to all

    Hi,
    Best way to start with is reading system copy guide which will give you step by step process.
    Thanks
    Sunny

  • Database Portability of restored Database in Production server

    Hi All,
    I have a query regarding database portability in Exchange 2010 server.
    I have restored a Journaling Database which is ~ 350 GB and just wanted to check if i dismount the prod database which does not have any data in the DB and only journlaing mailbox is pointed to this DB , can i move restored DB .edb file to the production
    server physical location and mount it, will the journaling account will connect to this restored database which i have copied. or do i have to run any command which will reconnect the mailbox. 
    BR/Deepak

    Hi,
    You can use the Connect-Mailbox -Identity -Archive cmdlet to re-connect an archive mailbox.
    You can refer to the following article.
    https://technet.microsoft.com/en-GB/library/ee633490(v=exchg.141).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Production server Incremental Backup is restoring in Testing server

    Dear All,
    Currently our Production database is running in windows 2003 server , Oracle version is 10.2.0.4.0
    Now my question is daily incremental backup of production server will be restored in testing server (same configuration in production server
    and testing server ) how can i achieve this .....
    Regards,
    S.Arun

    Hi Oradba,
         Thanks for your response. I went through the link and we need this only for testing purpose and not for reporting.
    We need to take incremental backup and restore it in testing server. Is it possible to do this without RMAN.(Due to some Business reasons)
    Thanks & Regards,
    S.Arun

  • Steps to restore a failed exchange server 2003

    If I have a recently taken full backup of my failed server what are the steps to restore it.
    I mean, After installing OS, then may I have to create the domain or restoring full backup creates domain automatically?

    Hi,
    Firstly, I’d like to explain, if you want install the Exchange server on the server you have installed OS, I recommend you just add the server into domain and create the domain on another server. Because it’s not recommended to install Exchange sever on
    DC:
    http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
    And here are some references about restoring Exchange server:
    http://support.microsoft.com/kb/258243
    http://www.msexchange.org/articles-tutorials/exchange-server-2003/high-availability-recovery/Exchange-2003-Backup-Restore-NTBACKUP.html
    Best regards,
    Angela Shi
    TechNet Community Support

  • Failed to restore site collection from development server backup on production server

    I get an error as below while restoring development site collection backup on production site collection.
    <nativehr>0x80070003</nativehr>
    Looked into the log file shows below error.
    "Microsoft.SharePoint.SPException: Schema version of backup 15.0.4641.1000 does not match current schema version 15.0.4569.1000"
    However SP1 version installed on both server. Recently upgraded Development environment to 15.0.4571.1502 as production environment has exact same version. Run SharePoint Products Config Wizard successfully after upgrade on Development server.
    Any help.
    Thanks

    Hi Trevor
    Thanks for reply.
    I am beginner in share point. 
    Getting below version in Development and Production Environment.
    In the beginning
    Dev environment has 15.0.4615.1001. Then we installed 15.0.4571.1502.
    Production Environment has 15.0.4569.1506. Then we installed 15.0.4571.1502.
    So now both versions looks exactly same. But somewhere it didn't upgraded fully. Backup and Restore works in the same server If applied but doesn't
    work if I apply from Dev to Production Version.
    Production Server
    Servers in Farm
    Farm Information
    Configuration database version:
    15.0.4569.1000
    Manage Patch Status
    Installed
    Microsoft Access Services English Language Pack
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Access Services Server
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Document Lifecycle Components
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Document Lifecycle Components English Language Pack
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Education
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Education English Language Pack
    15.0.4571.1502
    Installed
    Development Server
    Servers in Farm
    Farm Information
    Configuration database version:
    15.0.4641.1000
    Manage Patch Status
    Installed
    Microsoft Access Services English Language Pack
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Access Services Server
    15.0.4571.1502
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Document Lifecycle Components
    15.0.4571.1502
    Installed
    Security Update for Microsoft SharePoint Enterprise Server 2013 (KB2863829) 64-Bit
    Edition
    15.0.4615.1001
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Microsoft Document Lifecycle Components English Language Pack
    15.0.4571.1502
    Installed
    Security Update for Microsoft SharePoint Enterprise Server 2013 (KB2863829) 64-Bit
    Edition
    15.0.4615.1001
    Installed
    Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
    15.0.4571.1502
    Installed
    Not sure where is the problem.
    I manually change the version number in the .bak file still its the same.
    I get this error "<nativehr>0x80070003</nativehr>"
    and it deletes the site collection straight away.
    Thanks

  • Deploy Browsable Infopath form from Development server to Production server

    Hi All,
    I have designed and published an 'Infopath 2010' browser enabled form 
    as site content type to a sub site names SITENEW.
    Form security level is 'Domain' level.
    The form contains following types of data connections and one SPD worklfow attached to form library..
    1. Send multiple Emails of current/active view
    2. Submit data to form library
    3. Get Details from SharePoint lists.
    4. WEB sercice calling GetUserProfileByAccountname ( Same site collection).
    Form library, lists in point number 3 are located in same site i.e SITENEW
    I need proper steps to deploy this to production sub site.
    Is  saving the 'SITENEW' as site template and upload to production  good idea?
    How should I take care of data conncetions?. Please advise.
    Thanks to all
    Murali Krishna Dittakavi *********************** If my answer/post resolved your query could you mark the post as answered. If it is helpful then vote as Helpful. Thanks

    hi All,
    Can any one help me for the following issue.
    Issue:-
    i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production server "TestFormLib" Library when i did second time promoted in second time imported subsite cmp.
    I have a issue with info path form  promotion fields in production server.
    Scenario:-
    I have a site ,ex:- http://host/sitecollection/subsite1 in dev. machine, the subsite1 have
    a form library "TestFormLib".
    published infopath form wtih some promotional fields (ex:- Test1) to "TestFormLib" library.
    i am able to see all promoted 'Test1' field data  in the library.
    taken  back up form the dev upto sitecollection and restored in the production.
    created subsite1 in prodiction server and taken subsite1 cmp from dev , imported into production server and published form which have promoted columns to "TestFormLib" library.
    able to see the promoted (Test1) field data in "TestFormLib" library in production subsite1.
     re-activated info path form to "TestFormLib" library in dev machine with additional (Test2) field promotion.
    i am able to see the "Test2" promotion field data(Value) in dev machine "TestFormLib" library.
    then , taken cmp for "SubSite1"  from the dev. machine, imported into production server on "SubSite1" .
    re-activated the latest form which is promoted "Test2" field to production server.
    i am able to see the promoted column name "Test2" , but not able to see the data(Value) of the "Test2" in production
    server "TestFormLib" Library.
    Any Suggestions to solve the above issue and i dont want to recreate the library in production . Because the data has been deleted.
    Help please..
    Thanks & Regards,
    Raghava Reddy S

  • Steps to Make STANDBY SERVER..................

    hi
    1. can any body tell me the steps to make SAP standby Server.
    2. if our live SAp production Server fails then how can we up the standby Server.
    3. & after this when we make SAP Server again then how can we make this server
        in its actual position from standby Server.
    thanks & best regards.
    +Ishtiaq+

    Hi all,
    I dont think cluster is the solution for this. Because the requirement of DR server is different otherthan cluster environment.
    cluster is the concept to recover the primary database in hardware failures etc. And DR concept is for disaster recovery situations.
    Clustering concept is for quick resolution without any delay, only if your database is available.
    And steps to configure DR site.
    1) Install one DR server with same SID and same platform
    2) Take a full online/offline backup of primary database.
    3) Restore the same in to DR server
    4) Create standby controlfile on primary database and copy the same to DR
    5) Mount the DR database into standby mode
    6) recover the database, it will prompt you for next sequence of archive logs.
    7) Strart copying of archivelogs from primary to DR
    Let me know if any wrong from my side.
    Regards
    Nick Loy

  • Process flow of bpel process deployment in production server

    Hi,
    Can anyone please explain me the process flow of bpel process deployment in prodcution server . I mean the procedure that we follow for deployment in productions server , what are the steps that we follow , approval from any teams? .....
    Thanks,
    Beginner.

    A quick answer is:
    1. make sure you defined the Application/Integration Server in your developer (user/pass you have - if not oc4jadmin then one the IT gave you).
    2. Deploy your project to that server.
    3. Choose the correct domain in the Console when deploying.
    Is this what you wanted to know???

  • New production server PLUS upgrade!

    After years of groveling, weekly church visits, and burning incense, it appears that I will finally be able to get a new production server for our 3.3 TB data warehouse. They are also going to add 2 TB of space to our main storage array.
    In addition, management wants to upgrade from 10.2.0.3 to 11gR2 as part of that migration. Our current server was not able to handle 11g, according to Oracle.
    In recent times, I have had to do some very non-standard things as a dba, mostly due to insufficient resources. So these migrations may not be as straightforward as what you read in the docs, and therefore I would like some opinions about how best to achieve the migration to the new box, and to 11gR2.
    Our current environment is a Sunfire 6800 Sparc 64 box with 12 900mhz cpus and 16G of ram, and Solaris 10.
    Most of our datafiles are housed on a 3.7 TB Sun 2540 storage array, but due to space and performance constraints, it was decided to put one very large and mostly unimportant tablespace (350G) on a 2.1 TB Sun 3511 array. We also put our 2 temporary tablespaces (about 54G) on that array. Also on the 3511 array is our db_recovery_file_dest area, with all of our archived redo logs and flashback logs. Due to lack of space there, I have to direct our RMAN database file backups, archived log backups, and exports to an unsupported Hitachi SAN, which is 8 years old, like our Sunfire 6800.
    The new server is a Sun M4000 with Solaris 10, so the OS will not be an issue. It will have 4 4-way 2.5ghz processors and 32G of ram. The newly expanded 2540 array will have enough space to hold us for a few years. It is currently 3.7TB, using 2.6 of that. When expanded, it will be about 5.8TB.
    My mission is to move all of the temporary tablespace and other data files (about 1 TB) and the exports (1 TB) to the newly expanded 2540. We will keep the space (2.1 TB) allocated on the 3511 attached to the new server, but it will be used ONLY for recovery-related files; rman backups, flashback logs, archived logs, etc. My goal is to keep at least two full rman backups in that space, along with all the necessary archived log backups. We are supposed to get everything off of the old SAN. So, there will be a lot of file shuffling, nothing new for this shop.
    My plan would be to install 10.2.0.3 (same exact version) on the new server, then hook it up to the existing storage arrays. (My boss thinks that will reformat all of the disks on those arrays, but I don't think that is necessarily true. I believe it is possilble to mount each file system on those arrays to the new box, so long as they have been unmounted from the old one. Then again, I am not a Unix Admin)
    Next, I would startup-mount the database, move the necessary files to the 2540 using Oracle and Unix commands, then shut down the db. Then, I would install 11gR2 with all patches on the new server, and upgrade the database manually, in place.
    If my boss is right and connecting the new server to the existing arrays means re-initializing them, he asked if we could use our last RMAN backup to restore the database in the new environment. I said if we were still running 10g at that time on the new server, and all the file systems were identical, that should be possible. However, I should note that we do NOT use an RMAN catalog (RMAN uses the controlfile). We have no place to put an RMAN catalog. I have never even had a place to test doing a restore with RMAN.
    If anyone out there has been through a migration to a new server along with an Oracle upgrade, I would appreciate any ideas on the best way to go about it.

    Hi,
    Its not recommended to upgrade OS and Database same time. I would recommend :
    1) Migrate database from Old Server to new Severs.
    -> Install OS, packages, patches, create users, groups, mount points and configure kernel parameters as required.
    -> Restore $ORACLE_HOME, inventories, mount all data partitions on same mount points similar to old servers
    -> Perform relink for all oracle home binaries using command relink all command.
    Refer tech notes:
    http://download.oracle.com/docs/cd/B19306_01/install.102/b28053/toc.htm
    *Is It Necessary To Relink Oracle Following OS Upgrade? [ID 444595.1]*
    *How to Relink Oracle Database Software on UNIX [ID 131321.1]*
    2) Then perform an upgrade for your database.
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10863/toc.htm#i1011296
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
    Hope helps :)
    Regards,
    X A H E E R

  • Steps to restore contacts from either iPhone 4 or G drive slim.  Macbk 2.26 GHz, 2 Duo, 4 B 1067 MHz DDR3 with 291 GB avail storage out of 499 GB.

    Please provide the steps to restore contacts to my Macbook 2.26 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3, OS X 10.9.5.
    I have back up G mini drive and iPhone 4.
    Thanks,
    Tracy

    Inactive memory is your file system cache.
    The cache is trying to save you from expensive disk I/O (where expensive means in time and battery life).  Running that disk a lot drains your battery faster, and it is orders of magnitude slower than data already in RAM.  Unused RAM is a waste of money.
    Is your system running slow?  If so, then start looking at all those 3rd party additions you have loaded.
    Do you really need "2" virtual machines?  VirtualBox and Parallels?
    As mentioned above, get rid of the anti-virus software.  It is just eating system resources.
    Do you need MacFUSE.  It has been responsible for performance issues for some users (all of which may depend on what kind of file system format you are trying access).
    Do you need to run your own Samba server?
    You have OpenVPN and TunnelBrick.  Are they both needed?

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • PI-7.0(xi-7.0) as production server - wrongly abap client(001)

    Hi all,
    We are using PI-7.0(xi-7.0) as production server, we ran the post installtion successfuly  last  6month before and now server status is live production system.
    Our issue is we ran wrongly abap client(001)as default client in the  post-installation step. Now only we identified this. So we need to change from client(001) to production client(576).
    Please guide us to how to change the client..what are the solution to change .
    Thanks in advance.
    Regards
    Lakshminarayanan M

    Hi,
    >Any updates ?
    Do you realise that I'm not paid by my employer to do your work ?
    Is it so dificult to search for SAP OSS note with "client"  as keyword in BC-XI area ?
    I took me 2 minutes  to find notes 1115280 and 940309
    It is possible to use an other client instead of the default 001 client but there is no advantage and you have to reconfigure a lot of thing which can lead to a lot of trouble.
    PS :
    [Mode rant on]
    Why are so many people on these forums asking to be spoon fed ?
    They need to learn how to search information. It's so easy with the internet age and search engines !
    [Mode rant off]
    Regards,
    Olivier

Maybe you are looking for