Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

Similar Messages

Restore RMAN backup from tape

I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
Mahi

Can't read documentation? You also seem to be unable to mark questions as answered
Mahi
     Newbie
Handle:      Mahi
Status Level:      Newbie
Registered:      Nov 24, 2010
Total Posts:      24
Total Questions:      15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA

Restoring RMAN backup from tape beyond retention policy ??

Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.

dba.arnab wrote:
Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.
Assuming the actual backup files still exist (the only thing actually deleted is the record of them in the catalog), you can make those files available and use the rman 'catalog' command to re-catalog them.

Restore the backup from tape to some other server

Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
Kumar

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

RMAN recovery from tape and disk?

Hey Guys,
Here is my scenario: -
I have Oracle 10g and I am using RMAN to backup to disk and then I use Networker to backup on tapes from disk (retention is set to 30 days on tapes). On RMAN - my retention policy is set to recovery window of 5 days after which it deletes the obsolete backup from disk and updates the control file.
My Questions:
1. If I have to recover any datafile or tablespace 20 days ago how can I restore it on Production. Since I am also backing up control files on tapes but my current control file will not have 20 days old information. Is there any way that I can restore my old backup?
2.How can I test my tape backup which is older than 5 days. In other words how can I restore my database from tape on another server/
Please suggest.

If you need to restore the whole database to a point in time that is 20 days old, you "only" need:
1. to identify the right control file backup
2. restore this control file backup with Networker
3. start the instance in mount mode
4. list required datafiles and archived redo logs backup sets listed in this control file with LIST BACKUP
5. restore these backup sets with Networker
6. restore and recover database with RMAN with the right SET UNTIL clause.
If you need to restore only 1 tablespace, that's Tablespace Point In Time Recovery (TSPITR) and is another story.
I don't think you can only restore 1 datafile that is 20 days old and leave other datafiles up-to-date (unless there is only 1 datafile in the tablespace and in this case this is TSPITR).

How to restore a Rman backup from Tape

Hi,
We need to restore the database backup taken through RMAN on 24-JUNE-2013 from tape as this backup is not currently available on disk.
Can you please help me on the following,
1) how i can check if the same backup on 24-JUNE-2013 is available on Tape.
2) If yes how i can restore to Disk.
Because we need to create a new Clone instance from the backup taken on 24-JUNE-2013.
We are having 12.1.3 Application on Exalogic and 11.2.0.3 Database on Exadata machine.
Our support is highly appreciated.
Thanks

user11969666 wrote:
Hi,
We need to restore the database backup taken through RMAN on 24-JUNE-2013 from tape as this backup is not currently available on disk.
Can you please help me on the following,
1) how i can check if the same backup on 24-JUNE-2013 is available on Tape.
2) If yes how i can restore to Disk.
Because we need to create a new Clone instance from the backup taken on 24-JUNE-2013.
We are having 12.1.3 Application on Exalogic and 11.2.0.3 Database on Exadata machine.
Our support is highly appreciated.
Thanks
Your questions are answered in the Backup and Recovery User's Guide -- Contents
Thanks,
Hussein

Restoring RMAN Backup from ASM RAC env to Non ASM standalone environment

Hi,
Can anyone please tell me how to restore database using RMAN in a Non ASM environment as my backup file with ASM RAC environment.
i was also looking for some documentation which provides clear explanation about RMAN backup and Restore in ASM and Non ASM environment.
Thanks

You can set the parameter db_file_name_convert in init.ora in you new database with [ID 47325.1]
or
you can set parameter "set newname" in your script rman. [ID 549972.1]
if you have one or two destinations of dbfiles in ASM I seggest to you set parameter db_file_name_convert in init.
example:
db_file_name_convert=('+DGDATA','/u01/oradata/');
remenber you need set log_file_name_convert to.
log_file_name_convert=('+DGREDO','/u01/redo/');
if you use "set newname" commands you need set this lines in your script rman.
set newname for datafile 1 to '/u01/oradata/system01.dbf';
set newname for datafile 2 to '/u01/oradata/undotbs01.dbf';
set newname for datafile 3 to '/u01/oradata/sysaux01.dbf';
set newname for datafile 4 to '/u01/oradata/users01.dbf';
and every datafiles you need set!
Edited by: user1107977 on 21/07/2011 13:47

Restore backup pieces from tape to disk

Hello,
I want to restore the backup pieces from tape to disk. Is there any way of getting those bacup pieces to disk.
I have contacted storage team, that they can't copy the files, only through rman utility the files can be used.
I just need to restore the files from tape to disk. No, need to restore the database. I just need this for future purpose...
Thanks,
Ramesh G

You can try to use LIST BACKUP to get the backup piece name and then use Veritas tool to restore the backup piece from tape to disk.

Problem when restoring Backup from Tape...

Hi
I am getting the following error when I am trying to restore a backup from Tape on AIX system:
BR0279W Return code from 'LANG+C cd /oracle/RSD/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0': 0
BR0359W Restore of /oracle/RSD/sapbackup/.tape.hdr0 from /dev/rmt0 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0 failed
BR0236I Perfhaps volume initialization with option '-i force' required
I have initialized the tape before backup to label RSDB05 which I used while taking the backup.
When I initialized the tape as mentioned above with '-i force' then while restoring there is problem of timestamp.
How to restore the backup from tape now.
Regards
Chin2

Dear Ahamad,
In this command " brrestore -b xxxx.anf -m all -p /oracle/TRG/102_64/dbs/initSRC.sap " you are calling parameter file of source system initSRC.sap in which system is checking parameter/option 'compress_dir'. Please check if its same. Why you have replaced the SSID with TSID its not required at all.
Please follow these steps....
Place xxxxx.anf file in backup directory. check for parameters in initSID.sap file of TRG system. It should be the same as of SRC system.
Try again and post result if you are getting any error.
Regds
Anil

RMAN backup in tapes

Hi
We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.
Thanks
Shaik

We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.Creation Of Rman Duplicate Without Target And Recovery Catalog Connection. [ID 1113713.1]
Backup and Recovery
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Thanks,
Hussein

Rman Backup in Tape - Restore

Hi All,
This's my scenario.
I am using oracle 10gR2 on solaris 10. I configured Rman for my database. I ran the backup command on monday and again tuesday and again today also.
All backups are stored in tape not disk. now I have a problem, so I want to restore the Monday backup from tape.
How to tell these to Rman. If I simply mentioned the restore command, hope Rman will restore the latest backup. But I want to restore the Monday Backup.
Could you anyone help me on this..
Many Thanks
Senthil

when ever you are recovering the database to certain time,certain scn then it is a incomplete recovery only.
after completing the recovery by specifying until time or until SCN oracle will not allow you to open the database.
It will ask you to open the database in resetlog mode.
The step which admin given is correct one but after that you have to open the db in resetlog mode
Edited by: PrafullaNath on May 19, 2010 4:28 PM

Restore ( duplicate) db from tape backup from one server to another server

I am looking for step by step process to restore (duplicate)db from tape backup from one server to another server
Thanks

Creating a Duplicate Database on a Remote Host will provide all the information.

Restore backup piece from tape to disk?

Hi,
Is it possible to restore rman backup piece from tape to disk? Please advice.
Thanks,

Is it possible to restore rman backup piece from tape to disk? Please advice.I dont think so it is related with ORACLE database to copy backup pieces from tape to disk.
You might have any other vendors like veritas, Symmetrix & all. We backup an Oracle database via the TDP application to tape

How to move rman backups on tap from disk

Hi,
I have rman backup files on the disk, now how we can move these files to tap. is there any rman command or is there any script to move.
Thank you!

Do you use FRA (Flash recovery area)?
If you use FRA then configure RMAN to take backup to tape. And backup fra to tape.
RUN
ALLOCATE CHANNEL ch0 TYPE ‘SBT_TAPE’;
BACKUP RECOVERY AREA;
RELEASE CHANNEL ch0;
If you don't use FRA then you can backup your backupsets which are on the disk to tape.
RMAN> BACKUP DEVICE TYPE SBT BACKUPSET ALL;
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/

Restore RMAN Backup

Dear All,
I am practicing Oracle Restore scenarios on my Oracle 9i database. Once I complete my tests in Oracle 9i I will move up to 10g and then finally to 11g.
Following is my recovery scenario:
1) I did NOT configure Recovery Catalog
2) I would like to restore my databse from a 15 days old backup
3) control_file_record_keep_time is set to 7 days.
4) Backups are on tape.
Can you guys please shed some light on how to I proceed?
- P

In oracle 9i , check , which situation you can perform complete recovery and in which situations you have to select incomplete recovery.
check the notes by Alejandro Vargas, BACKUP AND RECOVERY SCENARIOS
http://www.google.co.in/#hl=en&q=oracle+backup+and+recovery+scenarios&aq=0&aqi=g10&aql=&oq=oracle+backup+and+reco&gs_rfai=&fp=aa24f2b3591f5f42
[PDF]
Backup and Recovery Scenarios - Backup & Recovery Check List
- 4:11am
File Format: PDF/Adobe Acrobat - Quick View
Oracle Support Israel. User Managed Recovery Scenarios And Configuration .... 4. recover automatic database using backup controlfile; ...
static7.userland.com/oracle/gems/.../BackupAndRecoveryChecklist.pdf
refer this, this will helps you.
Can one restore RMAN backups without a CONTROLFILE and RECOVERY CATALOG?_
http://www.orafaq.com/wiki/Oracle_database_Backup_and_Recovery_FAQ#Can_one_restore_RMAN_backups_without_a_CONTROLFILE_and_RECOVERY_CATALOG.3F
Edited by: rajeysh on Jun 20, 2010 6:36 PM

Steps to restore RMAN backups from tape to disk

Similar Messages

Maybe you are looking for