Steps to send a clip to AE to utilize Warp Stabilizer VFX then back to Premiere Pro CC

So I use Warp Stabilizer for about 200 clips per project. It's effectiveness has shaped how I shoot. It's awesome. Now there's VFX in AE...Can someone layout the steps involved in the following:
a) Taking a clip from Premiere Pro CC and sending it to After Effects CC (I'm not that versed in using AE having not used it in quite a while)
b) Then how to apply the new Warp Stabilizer VFX (I assume just go to effects>distort>WarpStabilizerVFX ???) ... (if there are tutorials on how exactly to use it, especially detailing exactly how to utilize the new feature of isolating what in the frame is to be stabilized that would be great too)
c) Then how to send it back to Premiere Pro CC. (I'm guessing I just save it and let dynamic link take care of the rest?)
I've tried right-clicking on a clip and selecting "replace with AE composition" (is that what I should do?), then applying the effect but I get a "warp stabilizer VFX analysis doesn't work with Collapse Transformations" message so I stopped. If it makes any difference, the majority of my footage is shot at 60p and then interpreted and edited at 23.976fps. Thanks!
NOTE TO STAFF: I've said it before and I'll say it again as someone who uses warp stabilizer several hundred times per week, I still think the default "method" in the settings should be "Position, Scale, Rotation" instead of Subspace Warp because it works FAR better (less wobble and less scaling about 90% of the time). Can't help myself I had to bring that up again here.

a) Select a clip in PrPro timeline, right-click and choose 'Replace With After Effects Composition'. Take care of handles if you might need them (that's rather general tip).
Warning about Collapse Transformation switch indicates that you have 'Scale to Frame Size' option enabled for your clips in PrPro timeline. If that was done intentionally, you can simply toggle the Collapse Transformation switch (small sun icon) off. If not, rather disable 'Scale to Frame Size' for your clips in PrPro timeline.
b) Quite a boring but covering almost all necessary details tutorial on basic work with Warp Stabilizer in AE CC from Adobe TV:
Some advanced techniques from Lynda.com
and Mathias Möhl:
c) When you're happy with your work in AE and going to lock it, render a digital intermediate out of AE, import it into PrPro and replace your dynamically linked composition in the timeline with that DI (see this good old thread on Dynamic Link workflow, pay attention to Todd's comments).
If you leave the 'Include Project Link' checkbox in the Output Module Settings dialog enabled while rendering your DI, you can easily get back to appropriate AE project so as to maybe tweak some settings: just select your DI in PrPro timeline, right-click and choose 'Edit Original'.
Mind the bloating issue, keep the amount of applied Warp Stabilizer instances in a single AE project reasonable.

Similar Messages

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

FAQ: Can I open my Adobe Premiere Clip project in Adobe Premiere Pro?

Yes. When you are ready to export your project to Premiere Pro, begin by tapping the share button in the upper right corner of your screen. Next, simply tap the Edit in Premiere Pro button. Within a few minutes, this will send your project and media to your Creative Cloud folder. Open up Premiere Pro on your computer, and from the Welcome Screen select the option to “Convert Premiere Clip Project” under the “New” heading. Next, choose the project XML file you wish to continue editing in Premiere Pro. All of your project edits will show up in your Premiere Pro timeline, making it easy to continue working.

Since PrPro project is an XML file, you can open it up in any script editor (e.g. Adobe ExtendScript Toolkit) or even text editor, in fourth line find Version="25"
<?xml version="1.0" encoding="UTF-8"?>
<PremiereData Version="3">
<Project ObjectRef="1"/>
<Project ObjectID="1" ClassID="62ad66dd-0dcd-42da-a660-6d8fbde94876" Version="25">
and replace it with Version="23".
Although it works just fine most of the time, bear in mind: everything is at your own peril.

Can't export clips or sequences to Audition from Premiere Pro cc 2014.2

I can't get audio tracks or anything to export to audition. If I right click on them the option is grayed out and if I go to the clip menu and select "edit in adobe audition" the "clip" is grayed out and if I choose sequence it opens a dialog box that will not let me click the box "open in adobe audition".
I am watching a how to video but my program will not function as shown in video.

I uninstalled Audition and reinstalled it. I read that it should be installed after premier pro cc. That restored the grayed out links. good, but now other problem.
Now the new issue is the export to premiere from Audition is greyed out.
I will try and get this make sense...
I installed premiere cs6 two days ago to get Encore for dvd burning and menus. After the uninstall/reinstall of audition just now I ran a check on the link and got stuff from premiere cc 2014 to launch into audition, but when I checked how to send it back to premiere pro cc 2014 when I went to export to premiere (and was able to check the open in Premiere box) it launched cs6, but I want it to go to my premiere cc 2014
So I uninstalled cs6 only leaving encore, now the box to send it to premiere is unable to be checked.
I tried another fresh install of audition, but the box is still unable to be checked.
I need help - been up all night and having a rough time here.

How to apply warp stabilization to the same clip used twice in the same timeline

If I use the same source clip in a timeline (say 3 or 4 different sections of the clip by dropping the same clip on the timeline and just trimming it differently) and want to stabilize them all, how do I do that? The first instance of the clip lets me use warp stabilization, but then when I try to apply it to later instances of the same clip in the timeline, it says I can't do that. How do I apply the stabilization to later instances of the same clip in the timeline?
Thanks

After trimming the clip just apply the warp stabiliser to it without copying and pasting. You can't copy and paste the warp stabiliser because it needs to analyse the pixels of each clip everytime its applied.

Premiere Pro CS4 Crashes When Importing HD Clips

I've used Camtasia forever but recently decided to "upgrade" to Premiere Pro when I got my new Macbook. Not being familiar with Premiere at all, I thought I would play with it with a few short clips. I have HD footage of my martial arts class which I shot with my Canon Vixia HG20 and copied it to my Macbook. However, when I imported a few clips into Premiere Pro and try to play it, it hangs. It will play one or two clips and then it stops responding after that.
All in all, it's only about 2 minutes of footage that I've put into Premiere Pro. I have no problems putting the clips into the Timeline but when I try to preview the clips (either in the source monitor or the program monitor windows), Premiere Pro gives me the little rainbow pinwheel and 20 minutes later, it's still spinning around. I bought a 500Gb external hard drive to use as the scratch disk because I thought maybe it was a space issue having everything on my Macbook but I still get the pinwheel. My only solution is to force quit the program.
I have a 2.4GHz Intel Core 2 Duo Macbook Pro on OS X (10.5.6) with 4GB of memory, GeForce 8600M graphics card, and 200GB hard drive. I've read about a of of the crashes on here but didn't really see anything similar to my situation. Any ideas? I spent a lot on Premiere Pro and am not willing to give up on it quite yet.
Please and thank you!

17 Mbps is still at the high end, but IMHO they should ultimately work.
Very often with AVCHD, you have to play a clip until it freezes, then wait. If you monitor CPU usage during the waiting time, you'll see that it is quite active. The process using the CPU is the ImporterProcessServer, which has to do some kind of magical stuff to the AVCHD clips in order for them to play and scrub in Pr. Once the IPS is done, you should be able to scrub and play the clip just fine.
Usually you only have to do this once per clip, but sometimes more. Sometimes the work that the IPS does carries over between Pr sessions, and sometimes it doesn't.
Smaller frame sizes and lower bit rates in AVCHD video helps make the editing experience in Pr much better.
My hope is that the upcoming 4.1 update will address some of these AVCHD issues.
-Jeff

Premiere pro hangs on waving a mouse over a clip thumbnail

This problem has been going on for months. I cannot keep taking enforced 5 minute breaks.
Premiere hangs when waving a mouse over a thumbnail in a bin. The entire machine becomes unresponsive for up to five minutes. Hover Scrub is not switched on. The hang is codec independent. Happens on DPX files, Cineform, Pro Res and any other codec encoded clips.
Win 7, Premiere CC 2014 8.2.0 (65) Caravan. Dual Xeon machine, fast raid 48GB RAM, 4 GTX Titans. This machine is not short of horsepower and it runs Resolve flawlessly.
I have already uninstalled/reinstalled, deleted preferences and cache and all the other things that are suggested in the FAQ. I have also set Premiere to only use 1 of my GTX Titans (out of 4).
Wave a mouse over a clip thumbnail and the machine becomes very unresponsive. The mouse movements become jerky. Premiere windows all go white, then come back again. Task Manager shows over 90% System Idle, CPU usage as low as 3%. It's as if Premiere is waiting for something. Eventually I get control of the machine back and can continue unless I want to select another clip from a bin. Then I have another five minute wait, even if I click the same clip that I clicked on before. This is not increasing productivity.
I know there are thousands of people suffering from similar issues to this, either on PC or Mac. I don't even get a reply on Premiere's support 'chat' (case number 0186356023)
Adobe, what is going on?

Hi Kevin,
Thanks so much for your reply! I've reset the preferences in the past and did so again after your suggestion, but no luck. I even went into the AppData folder to remove the preferences sub-folder altogether. It still hangs and acts as "Not responding" for several minutes before startup.
I wonder if there's any connection between this issue and a second issue I'm having with CC not being able to play ProRes files. http://forums.adobe.com/message/5845690#5845690
In any case, I uninstalled every Adobe Product on my machine, ran the Adobe cleaner successfully, then re-installed Premiere Pro CC. Unfortunately, nothing seems to have changed.

I want to send a clip from FCP to Motion

i am selecting a clip in my sequence and using the 'send to motion' menu but when it comes up in Motion it's not the clip i selected. It is using the out point for the clip i selected as the in point and making a new out point at the duration of the clip i selected.
anyone know why

Thanks for your reply Patrick,
No the clip has no speed alterations, the only thing bout it that i can see altered is that it a subclip from the original file that i captured in the same project.
Guess it might be a weird one then ay, there will probably be someone out there that knows whats up with it though,
When you are sending a clip or sequence to Motion from FCP do you need to have motion set up as the structure of you FC project before hand eg, ( DV- PAL) or does Motion reconize the formats from your FCP project that you are cutting on?
TH

Capture Error in transformation Step and send it by email without Alerts

Hi all,
I have a problem in my BPM.
I need to capture an error in transformation Step and send it by email with a send step without alerts.
Is there a way to do this in BPM?

Hi Mariano,
Please check the standard pattern in IR under software component SAP BASIS ->Integration process
-->BpmPatternReqRespAlert.Hope this will help you for building the scenario.
In this process we define a deadline branch to monitor the deadline. If the deadline is missed, an alert is triggered and this can be sent to an email too.
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Hope this helps.
Best regards,
Sharath
Edited by: sharath Girmaji on Dec 19, 2008 7:17 PM

Sending video clips to my phone, how?

Can anybody help me?
i want to know how i can send video clips from my pc to my nokia n80 via usb cable.
Nokia pc suite doesnt seem to support this and i am confused as to what to do?

This is the iPhone discussions.
Export this movie as a Windows Media Player file - Export: Movie to Windows Media which will also add the .wmv extension to the exported file.

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why? Others couldn't open them so I sent them to myself and get the same message. Doesn't seem to be a size issue as I've tried with really short clips (4 seconds). As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto. It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure. Thanks for any and all help!
Jim

When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto?

Sending video clips from 6235

I am trying to send some video clips from my 6235 to my home email address and it keeps saying that the maximum messages size is exceeded. Is there anyway that I can get around this problem or even edit the video clips if possible???
Some one help please.....

The 300kb limit is set by your network operator and cannot be changed.
Only short clips (around 10 seconds max) at medium to low quality can be sent using mms.
You may be able to send longer clips using email but that depends on your networks email/data policy.

Can You Send A Clip To Motion?

I don't have the tools I need in FCPX to complete a title sequence as I would like, so I thought I'd just send the clip to Motion and work with it there. Is this possible in FCPX? I don't see it in the help document.
Thanks,
Lawrence

I suppose the questions were similar. But earlier I was asking if there was a way to import a motion file into FCPX. This time, I was merely asking if you could send a video clip to Motion as the basis for starting a Motion project. I understand the lack of round-tripping. Just wanted to quickly get my video clip into motion to lay the titles over it there. But I guess it makes sense that if you can't bring it back, then you can't send it out. . . well, as much as any of this is making sense.
Thanks Stefan
Lawrence

Sending transcoded clip to Premiere Pro with Mono audio

Hi there,
I noted that others had asked this question around August 2013 but haven't seen any progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to make transcoded material come over from Prelude with mono audio.
We need to have total control over our audio tracks and for us in a News/ENG environment that also means fast turnaround production. So we want to choose the part of the XDCAM clip that we want in Prelude, send it to Premiere Pro and put the interview grab (for example) down on track 1 of the Timeline with only talent mike audio (which was recorded on the camera's channel 1) and not have to pan it or worry about doing much else to it. Then we cut the rest of the overlay with sound effects that were recorded on channel 2 going straight to track 2 on the timeline. When we transmit it to head office we send them two discrete channels of audio: talent/VO on Track 1 and effects on Track 2.
We only have a problem when Transcoding is involved. With the audio prefs in PrPro set to "Mono" everything else is fine, its just that when Prelude transcodes a video it makes the audio a hassle for us, because it can only come over to PrPro as a stereo audio track.
Adobe, is there ever going to be the ability to just make a Preference in Prelude to send the clips with Mono audio, as there is in Premiere Pro??
Or has anyone figured this out and I am just missing something?

In Adobe Media Encoder, set up a new preset that has the video and audio settings you want to have your source footage transcoded to:
Then name and save that preset. The next time you launch Prelude, the preset will be an option for you to select to use for transcoding your material.
MtD

Sending Multiple Clips from Final Cut to Soundtrack??

Hi,
I'm working on a 15 minute project that takes a good 5 minutes to open everytime I export it as a multitrack project to soundtrack pro. Soundtrack then behaves really sluggishly. In the STP manual it says that I can send a selection of clips to from FCP to STP as a multitrack project but everytime I attempt to do this I get the following error "Error sending selection to soundtrack pro". I'm hoping to send small chunks of the show to Soundtrack so that it will run at a usable speed. I'm interpreting the manual as saying that I can send the clips with their video (i.e. a 30 second scene from the larger video) to Soundtrack. Am I wrong? Maybe this is a problem with FCP? I've even tried sending a single clip as a multitrack project and that gave me the same error.
Any advice would be greatly appreciated.
Thanks
PS - I already have gone through the forum and found suggestions that linked mono and stereo files might cause something like this but all my files are stereo
Powermac G5 Dual 2.67Ghz Mac OS X (10.4.3)

Thanks for your reply.
I thought of that too. But when I pasted my clips into the new sequence the aspect ratio changed and I wasn't quite sure how to get it to return to the way it looks in the original sequence so I gave up.
Your success has emboldened me so I'll try again.
Another question: once you returned to FCP did you export a mix from STP and replace your original audio tracks? I was hoping that once this was done that I could cut some more and return to the original multitrack project in STP and see it updated with the new cuts. This doesn't seem to be the case (?) I'm hoping that I'm doing something wrong.
Powermac G5 Dual 2.7 Mac OS X (10.4.4)
Powermac G4 - Sawtooth, AGP graphics

Steps to send a clip to AE to utilize Warp Stabilizer VFX then back to Premiere Pro CC

Similar Messages

Maybe you are looking for