Steps to set up my domain with Apache
Hello,
I would like to know the steps to set up my domain with Apache including the use of DNS Services. I have DNS services (http://www.dnsexit.com) . I just don't know where to begin with it adding my domain. I've already went to my preferences>>sharing>> web sharing and turned it on. My domain host is netfirms. I have an actiontec model- m1424-wr router and I have a verizon fios wireless connection that's always on. I've been doing my research on this. I'm just stuck on this part. However is it true that php/mysql is pre-installed on Mac osx 10.6? I hope I can get help. Thank you in advance.
Your description is somewhat incomplete. I assume that dnsexit.com provides dynamic DNS and that you registered a domain name with NetFirms (you say "domain host", but I presume that you just registered the domain name and they aren't actually hosting it; hosting means that your web site is on their computers instead of yours). I'll also assume that you mean that you intend to run a web server on your Mac through your FiOS connection (not a great idea, and potentially a violation of FiOS' terms of service unless you bought their commercial plan).
If all of those assumptions are correct, you need to:
1. Contact NetFirms and tell them to point your domain to DNSExit's name servers: ns1.dnsExit.com and ns2.dnsExit.com and ns3.dnsExit.com and ns4.dnsExit.com
2. After step 1 is complete, you need to install a dynamic DNS update client on a computer in your network that will always be on (DNSExit has them and installation and set-up instructions). These programs will periodically check the IP address of your network and, if it changes, will update the record at DNSExit so that sites can find it. Note that you are using FiOS so the IP address of your router is expected to change periodically; this works around that. Your router has 2 IP addresses: the WAN is the IP address exposed to the world through your FiOS connect, and the LAN, which is an address local to your home network.
3. Login to your ActionTEC router as the adminsitrator. You can do this through your web browser. The LAN IP address of the router is the gateway address indicated in the Network preference pane for your ethernet connection. The modem documentation tells you the default password for the router (make sure to change it).
Perform the following tasks on the router (though the advanced options, you'll want to poke around to find them):
a. check the DHCP address ranges (usually it says that it will give out IP addresses from 192.168.1.100-192.168.1.200 or similar). Note it down. You're going to want to give the computer that acts as the web server a static IP address outside that range.
b. Choose an address outside the DHCP range that isn't already in use and write it down. This will be the static IP addres you will set on your web server.
c. Locate the Firewall/NAT settings on the router and add a rule to forward traffic on ports 80 and 443 to the IP address you had chosen.
4. On the computer that will be the web server, start web-sharing.
5. Go to the network preferences and configure the static IP address that you selected. Use the same gateways and DNS settings that were assigned by DHCP.
... and that's it. If you performed all those steps properly, requests to your domain will be sent to your FiOS modem and forwarded on to the designated computer for a response.
PHP and Apache are preinstalled on the Mac. MySQL is not. You will need to download and install MySQL yourself.
Similar Messages
-
Quick Question - Setting up Personal Domain with godaddy
Hi there
Just a quick question to make sure I've done this correctly?
Ok, I've published my iWeb website.
I've purchased a personal domain with godaddy.
I've set up the personal domain in my mobile me account.
I then logged into my godaddy account and went to 'Total DNS Control and MX Records'
I changed the following under CNAME (Aliases)
www web.me.com 1 Hour
and then added a new CNAME Record
www.*******.com web.me.com 1 Hour
Have I done this all correctly?
Will it take a few hours to take effect?
Anything else I need to consider?
Thanks for reading.
RossCNAME settings can take up to 24 hours to take effect.
As long as you have forwarded your domain name to web.me.com, then it should be okay. -
Servlet mapping with Apache + Tomcat
I'm trying to set up my servlet with apache + Tomcat(3.2.3), and i'm using mod_jk as the Tomcat-Apache plug-in.
The HelloWorld servlet that comes with the examples app worked fine at: http://localhost/examples/servlet/HelloWorldExample,
but how do I change the configurations, so that it can be invoked at:
http://localhost/examples/HelloWorldExample ?
It appears to me that '/servlet/' is the default prefix for Tomcat's RequestInterceptor, there is no way to get around that.
Any insights will be greatly appreciated, thanks!
Elainehi
Try this:
add below code in web.xml file in examples/WEB-INF
F directory
<servlet-mapping>
<servlet-name>
HelloWorldExample
</servlet-name>
<url-pattern>
/HelloWorldExample
</url-pattern>
</servlet-mapping>
Thanks for the reply, the web.xml is already set up this way, in fact, I'm able to invoke the servlet through tomcat(running on port 8080): http://localhost:8080/examples/HelloWorldExample,
tomcat reads the web.xml without any problems.
The problem comes from Apache(port 80), http://localhost:80/examples/HelloWorldExample wouldn't work, only http://localhost:80/examples/servlet/HelloWorldExample works.
It appears to me that when requests are relayed from Apache to tomcat, you need to tell tomcat that you intend to invoke a servlet by prefixing '/servlet/', if you look in the server.xml, it has
<RequestInterceptor
className="org.apache.tomcat.request.InvokerInterceptor"
debug="0" prefix="/servlet/" />
I've tried to change this to something else, it didn't seem to make any difference. -
Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help
Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy -
How to delete multiple data domains with single step ?
how to delete multiple data domains with single step ?
You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup. -
Is anybody out there who knows the steps to set up Logic Express? with an Alesis iO|26 interface
Is anybody out there who knows the steps to set up Logic Express 9 (scores) with an Alesis iO|26 interface to input notes by playing
an electric guitar? Thank you for your time and patience.
W.W.And i fount this
PETERSON SONUUS-G2M MIDI-KONVERTER
ok this one could sendout your guitar sound as a MIDI data but only monophone.
Thats what i see as a big computation problem ( when you play your simple C7 there are
at least 10 important parameter that describe your C7 chord; but if you play monophone
theese small boxes can convert it).
Have you tried anny MIDI guitar?
I saw some "usb" guitars transmiting midi signal into
software synth on some computer.
http://www.roland.com/products/en/GI-20/
This one? -
Steps to integrate ClickStream with Apache
Hi All,
Could anyone please share information on:
Steps to integrate ClickStream with Apache
Thanks for your time!
Regards,Hi User;
Please follow below and see its helpful for your issue:
http://download.oracle.com/docs/cd/B10570_07/relnotes.902/a97272.pdf,
[Link 1|http://hy.gzntax.gov.cn/k/2002-1/679843.html]
Oracle9iAS Clickstream Intelligence 9.0.2 [ID 232015.1]
Regard
Helios -
Can i set up a purchased domain with iWeb?
I made a website in iWeb. I have a domain purchased through google apps. my domain is jonahdelso.com.
HOW CAN I CONNECT THE TWO? I thought I knew what I was doing, and now I realize that I might have made a mistake by purchasing a domain through google apps, because i don't know how to configure the domain to connect to the web.mac.com servers. ANY HELP? ANYONE?The use of a Personal domain is VERY extensively discussed in this forum and the [MobileMe Personal domain|http://discussions.apple.com/forum.jspa?forumID=1163] forum.
You MobileMe account also has a Help where it is explained. See picture below.
iWeb is not involded in setting up your domain at Google. If you make mistakes then no doubt Google can help you mend it.
For the record: you have to add a CNAME at your domain host. [Google has the FAQs|http://www.google.com/support/a/bin/search.py?query=cname&ctx=en%3Asearchb ox&Action.Search=SearchHelpCenter]
!http://www.wyodor.net/_Discussions/DomainHelp.png! -
Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Problems setting up a Domain - javax.management.InstanceNotFoundException
I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()If you want your application work, think my way. At least, all my teammates have used this method to build their development environment. If you are more interested to debug for Weblogic, contact your support representative. The tools from Administration console look very nice, but not function as you want (e.g., the tool to convert version 5.1 application to version 6, even monitor tools). Administration console is very nice to be used to configue the parameters for a domain, but not so trustful and not for application setup in my own experience and that is why I suggest you use mydomain and DefaultWebApp_MyServer as templates. By the way, I did modify config.xml manually to change the default web application entry, etc, to what I want.
Jay Zammit <[email protected]> wrote:
I did not modify config.xml manually. In fact, I am able to boot both the Administration Server & Managed Server. The problem happens when using the Administration console to assign my logs and Default Applications directory to the d:/managedServers/FooServer/logs, and d:/managedServers/FooServer/applications/DefaultWebApp_FooServer directories. Try it yourself. Go to the Configurer WebApp option and type in a fully qualified directory such as d:/managedServers/FooServer/applications/DefaultWebApp_FooServer
and see if it works on your system.
thanks
jay ()
Xiang Rao wrote:
One suggestion. Use the default domain mydomain as a template. Just make a copy of "mydomain" in folder config and rename the copy to whatever you like. Use some help tools to search all files (non-binary files) in new domain for key word "mydomain" and replace these words with your new domain name. To build an application, just rename the DefaultWebApp_MyServer to what you like and search "DefaultWebApp_MyServer" in all files (non-binary files) in your new domain and replace these words with yournew application name. Note you need to modify the scripts accordingly. Then you can run "startWeblogic" in your new domain directory to start your new domain. Other parameters should be configured by Administration console. If you manually modify configuration files, you could expect some bad news without reason.
Jay Zammit <[email protected]> wrote:
I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay () -
Step by Step procedure for Integration of B0 with BI 7.0, Portal
Hi,
My key concerns include integration with SAP Portal, which I did not find in instalaltion guide.
Please advice on step by by Procedure for BO with BI 7.0 starting with the right version of BO to be installed.
1. Which version compatible with BI 7.0 SP 12, LATER TO BE UPGRADED TO sp 16
2. Source of data will be BI and reports will be using BO.
3. What are components to be installed
4. Prerequisites for Integration with BI AND SAP Portal.
5.Steps for Integration with BI 7.0
6. Steps for Integration with SAP Portal- Where to get the sample iviews. What to do for connction between Portal and BO - this i didnt find in installation guide
Thanks,
HarishHI,
here the items:
SAP Side:
- all machines have to be in the same domain
- BI has to trust the portal
- BI has to accept SSO tickets
- EP has to generate SSO tickets
BusinessObjects:
- SAP Authentication has to be configured
- BI system should be configured has default system in the options of the SAP authentication
- authentication.default parameter in the web.xml for InfoView has to be set to secSAPR3
- BusinessObjects has to be in the same domain
EP side:
- in the system landscape configure the Crystal Enterprise Server Properties for your BI system
- import the portal iview template that is part of the SAP Integration Kit
- create a new iView
Ingo -
JWS not working after Java updates to JDK 1.6 update 24 (with apache felix)
Hi,
I'm currently working on some JWS application, which heavily relies on Apache Felix. It was working spotless until recent security update which comes along with Java 1.6u24. Now my application dies just when Apache Felix is starting to work.
The exception being thrown is:
SEVERE: Permission denied: http://felix.extensions:9/META-INF/services/javax.xml.parsers.SAXParserFactory
java.lang.SecurityException: Permission denied: http://felix.extensions:9/META-INF/services/javax.xml.parsers.SAXParserFactory
at com.sun.deploy.security.DeployURLClassPath$UrlLoader.findResource(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.findResource(Unknown Source)
at java.net.URLClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findResource(Unknown Source)
at com.sun.jnlp.JNLPClassLoader.findResource(Unknown Source)
at java.lang.ClassLoader.getResource(Unknown Source)
at com.sun.jnlp.JNLPClassLoader.access$001(Unknown Source)
at com.sun.jnlp.JNLPClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jnlp.JNLPClassLoader.getResource(Unknown Source)
at java.lang.ClassLoader.getResource(Unknown Source)
at com.sun.jnlp.JNLPClassLoader.access$001(Unknown Source)
at com.sun.jnlp.JNLPClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jnlp.JNLPClassLoader.getResource(Unknown Source)
at java.lang.ClassLoader.getResourceAsStream(Unknown Source)
at javax.xml.parsers.SecuritySupport$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.xml.parsers.SecuritySupport.getResourceAsStream(Unknown Source)
at javax.xml.parsers.FactoryFinder.findJarServiceProvider(Unknown Source)
at javax.xml.parsers.FactoryFinder.find(Unknown Source)
at javax.xml.parsers.SAXParserFactory.newInstance(Unknown Source)
at com.sun.javaws.Launcher.executeApplication(Unknown Source)
at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
In javaws.policy, java.policy I have set up proper security rules to enable JWS to work out of sandbox by specifying:
grant {
permission java.security.AllPermission;
grant codeBase "http://felix.extensions:9/" {
permission java.security.AllPermission;
Also, I'm using maven's webstart-maven-plugin to create a JWS jnlp file. It's being property signed with security certificate. My resulting jnlp file has this part of configuration embedded:
<security>
<all-permissions />
</security>
Do You have any ideas what might be the problem?
CheersI just submitted a bug, and got the following e-mail.
Hope the java guys take a look ...
Full View
Your Report (Review ID: 1990127) - SecurityException from all-permissions app - should be ClassNotFoundException
From:
"[email protected]" <[email protected]>
Add to Contacts
To: [email protected]
Dear Java Developer,
Thank you for your interest in improving the quality of Java Technology.
Your report has been assigned an internal review ID of 1990127, which is NOT visible on the Sun Developer Network (SDN).
Please be aware that the large volume of reports we receive sometimes prevents us from responding individually to each message.
If the information is determined to be a new Bug or RFE, or a duplicate of a known Bug or RFE, you will receive a followup email containing a seven digit bug number. You may search for, view, or vote for this bug in the Bug Database at http://bugs.sun.com/.
If you just reported an issue that could have a major impact on your project and require a timely response, please consider purchasing one of the support offerings described at http://developers.sun.com/services/.
The Sun Developer Network (http://developers.sun.com) is a free service that Sun offers. To join, visit http://developers.sun.com/global/join_sdn.html.
Thank you for using our bug submit page.
Regards,
Java Developer Bug Report Review Team
Date Created: Wed Mar 02 15:43:52 MST 2011
Type: bug
Customer Name: Reuben Pasquini
Customer Email: [email protected]
SDN ID: catdogboy
status: Waiting
Category: javawebstart
Subcategory: other
Company: http://frickjack.com
release: 6u24
hardware: x86
OSversion: windows_7
priority: 4
Synopsis: SecurityException from all-permissions app - should be ClassNotFoundException
Description:
FULL PRODUCT VERSION :
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode, sharing)
ADDITIONAL OS VERSION INFORMATION :
Microsoft Windows [Version 6.1.7600]
EXTRA RELEVANT SYSTEM CONFIGURATION :
This is a java bug - I have users on WIndows 7 and XP, and also reported on Apache felix mailing list
A DESCRIPTION OF THE PROBLEM :
The following class, when bundled, signed, and deployed with the .jnlp file below, throws a
SecurityException
in the new java release - even though the .jnlp specifes "all-permissions".
Past releases would throw a ClassNotFoundException - which is great,
and is what things like Oracle's thin-client ojdbc6.jar expect.
The program bootstraps the Felix OSGi engine - which apparently sets up a URLClassLoader with a custom felix:// URL.
The output of running the program with webstart follows
below the .jnlp file.
Note that this .jnlp file is setup to run off the file system, but the same result follows from web-launched apps, whatever.
package littleware.demo;
import java.io.PrintWriter;
import java.io.StringWriter;
import java.net.URL;
import java.net.URLClassLoader;
import java.sql.Connection;
import java.util.HashMap;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.SwingUtilities;
import javax.swing.WindowConstants;
import org.apache.felix.framework.Felix;
public class JavaToy {
private static final Logger log = Logger.getLogger( JavaToy.class.getName() );
public static class AppRunner implements Runnable {
public void run() {
final StringWriter swriter = new StringWriter();
final PrintWriter pwriter = new PrintWriter( swriter );
pwriter.append( "Class path: " ).append(
System.getProperty( "java.class.path" )
).append( "\n\n-------------------------\n" );
final ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
if ( classLoader instanceof URLClassLoader ) {
pwriter.append( "URLClassLoader:\n" );
for ( URL url : ((URLClassLoader) classLoader).getURLs() ) {
pwriter.append( url.toString() ).append( "\n" );
pwriter.append( "\n--------------------------------\n" );
try {
Class.forName( "bogus.DoesNotExist" );
pwriter.append( "No exception thrown on bogus class load\n" );
} catch ( Exception ex ) {
pwriter.append( "Caught exception loading bogus class: " ).append( ex.toString() ).append( "\n" );
ex.printStackTrace(pwriter);
pwriter.flush();
final JFrame jframe = new JFrame( "Webstart test" );
final JTextArea jtext = new JTextArea( swriter.toString(), 20, 40 );
jframe.add( new JScrollPane( jtext ) );
jframe.pack();
jframe.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
jframe.setVisible(true);
public static void main( String[] args ) {
try {
log.log( Level.INFO, "Launching felix!" );
(new Felix(new HashMap<String, Object>())).start();
Thread.sleep( 2000 );
} catch (Exception ex) {
log.log(Level.SEVERE, "Caught exception", ex);
System.exit(0);
SwingUtilities.invokeLater( new AppRunner() );
REGRESSION. Last worked in version 6
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
*. Download felix.jar from
http://felix.apache.org
*. Build the following code, sign Toy.jar and felix.jar with your key,
launch with the following .jnlp or something similar ....
package littleware.demo;
import java.io.PrintWriter;
import java.io.StringWriter;
import java.net.URL;
import java.net.URLClassLoader;
import java.sql.Connection;
import java.util.HashMap;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.SwingUtilities;
import javax.swing.WindowConstants;
import org.apache.felix.framework.Felix;
public class JavaToy {
private static final Logger log = Logger.getLogger( JavaToy.class.getName() );
public static class AppRunner implements Runnable {
public void run() {
final StringWriter swriter = new StringWriter();
final PrintWriter pwriter = new PrintWriter( swriter );
pwriter.append( "Class path: " ).append(
System.getProperty( "java.class.path" )
).append( "\n\n-------------------------\n" );
final ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
if ( classLoader instanceof URLClassLoader ) {
pwriter.append( "URLClassLoader:\n" );
for ( URL url : ((URLClassLoader) classLoader).getURLs() ) {
pwriter.append( url.toString() ).append( "\n" );
pwriter.append( "\n--------------------------------\n" );
try {
Class.forName( "bogus.DoesNotExist" );
pwriter.append( "No exception thrown on bogus class load\n" );
} catch ( Exception ex ) {
pwriter.append( "Caught exception loading bogus class: " ).append( ex.toString() ).append( "\n" );
ex.printStackTrace(pwriter);
pwriter.flush();
final JFrame jframe = new JFrame( "Webstart test" );
final JTextArea jtext = new JTextArea( swriter.toString(), 20, 40 );
jframe.add( new JScrollPane( jtext ) );
jframe.pack();
jframe.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
jframe.setVisible(true);
public static void main( String[] args ) {
try {
log.log( Level.INFO, "Launching felix!" );
(new Felix(new HashMap<String, Object>())).start();
Thread.sleep( 2000 );
} catch (Exception ex) {
log.log(Level.SEVERE, "Caught exception", ex);
System.exit(0);
SwingUtilities.invokeLater( new AppRunner() );
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="file:/C:/Users/pasquini/Documents/Code/JavaToy/dist/" href="launch.jnlp" spec="1.0+">
<information>
<title>JavaToy</title>
<vendor>pasquini</vendor>
<homepage href=""/>
<description>JavaToy</description>
<description kind="short">JavaToy</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="JavaToy.jar" main="true"/>
<jar href="lib/felix-2.0.4.jar"/>
</resources>
<application-desc main-class="littleware.demo.JavaToy">
</application-desc>
</jnlp>
EXPECTED VERSUS ACTUAL BEHAVIOR :
EXPECTED -
Class path: C:\Program Files\Java\jre6\lib\deploy.jar
URLClassLoader:
file:/C:/Users/pasquini/Documents/Code/JavaToy/dist/JavaToy.jar
file:/C:/Users/pasquini/Documents/Code/JavaToy/dist/lib/felix-2.0.4.jar
http://felix.extensions:9/
Caught exception loading bogus class: java.lang.ClassNotFoundException: bogus.DoesNotExist
java.lang.ClassNotFoundException: bogus.DoesNotExist
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at littleware.demo.JavaToy$AppRunner.run(JavaToy.java:39)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
ACTUAL -
Class path: C:\\Program Files (x86)\\Java\\jre6\\lib\\deploy.jar
URLClassLoader:
file:/C:/Users/pasquini/Documents/Code/JavaToy/dist/JavaToy.jar
file:/C:/Users/pasquini/Documents/Code/JavaToy/dist/lib/felix-2.0.4.jar
http://felix.extensions:9/
Caught exception loading bogus class: java.lang.SecurityException: Permission denied: http://felix.extensions:9/bogus/DoesNotExist.class
java.lang.SecurityException: Permission denied: http://felix.extensions:9/bogus/DoesNotExist.class
at com.sun.deploy.security.DeployURLClassPath$UrlLoader.getResource(Unknown Source)
at com.sun.deploy.security.DeployURLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at littleware.demo.JavaToy$AppRunner.run(JavaToy.java:39)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
REPRODUCIBILITY :
This bug can be reproduced always.
---------- BEGIN SOURCE ----------
package littleware.demo;
import java.io.PrintWriter;
import java.io.StringWriter;
import java.net.URL;
import java.net.URLClassLoader;
import java.sql.Connection;
import java.util.HashMap;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.SwingUtilities;
import javax.swing.WindowConstants;
import org.apache.felix.framework.Felix;
public class JavaToy {
private static final Logger log = Logger.getLogger( JavaToy.class.getName() );
public static class AppRunner implements Runnable {
public void run() {
final StringWriter swriter = new StringWriter();
final PrintWriter pwriter = new PrintWriter( swriter );
pwriter.append( "Class path: " ).append(
System.getProperty( "java.class.path" )
).append( "\n\n-------------------------\n" );
final ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
if ( classLoader instanceof URLClassLoader ) {
pwriter.append( "URLClassLoader:\n" );
for ( URL url : ((URLClassLoader) classLoader).getURLs() ) {
pwriter.append( url.toString() ).append( "\n" );
pwriter.append( "\n--------------------------------\n" );
try {
Class.forName( "bogus.DoesNotExist" );
pwriter.append( "No exception thrown on bogus class load\n" );
} catch ( Exception ex ) {
pwriter.append( "Caught exception loading bogus class: " ).append( ex.toString() ).append( "\n" );
ex.printStackTrace(pwriter);
pwriter.flush();
final JFrame jframe = new JFrame( "Webstart test" );
final JTextArea jtext = new JTextArea( swriter.toString(), 20, 40 );
jframe.add( new JScrollPane( jtext ) );
jframe.pack();
jframe.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
jframe.setVisible(true);
public static void main( String[] args ) {
try {
log.log( Level.INFO, "Launching felix!" );
(new Felix(new HashMap<String, Object>())).start();
Thread.sleep( 2000 );
} catch (Exception ex) {
log.log(Level.SEVERE, "Caught exception", ex);
System.exit(0);
SwingUtilities.invokeLater( new AppRunner() );
---------- END SOURCE ----------
CUSTOMER SUBMITTED WORKAROUND :
I can work around the problem by installing the app locally, so web-start is not necessary. I ran into this problem with an app that connects to Oracle via ojdbc6.jar - ojdbc6.jar invokes "Class.forName" to check for optional i18n classes on the class path. The Oracle code correctly handles the correct ClassNotFoundException, but the new SecurityException is breaking my app.
workaround: -
How to fix permission denied for home folder with Apache in Mavericks?
I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Installation steps
To set up the webserver, I took the following steps:
1. activated the webserver with command: apachectl start
2. enabled PHP by checking if the module is loaded
3. checked if the home folder module is loaded
4. made the user based configuration file, in /etc/apache2/users/nazeem.conf The content is as follows:
<Directory "/Users/nazeem/Development/Websites/">
Options Indexes MultiViews FollowSymLinks AllowOverride All
</Directory>
Permissions
~/nazeem : drwxr-xr-x+ ~/nazeem/Development : drwxr-xr-x ~/nazeem/Development/Websites : drwxr-xr-x
Log
The apache log says the following:
[Mon May 19 21:22:57 2014] [error] [client ::1] client denied by server configuration: /Users/nazeem/Sites
In my opinion this is remarkable, as the path /Users/nazeem/Sites is nog what I defined in my user configuration.
Versions
OS X Mavericks 10.9.3
Apache 2.2.26
Does anybody know how to solve this?nzm_aak wrote:
I recently activated the apache that ships with OS X Mavericks. I followed some tutorial to set up the web-server, however. When I browse to my home-filter at http://localhost/~nazeem, I get the following error: You don't have permission to access /~nazeem/ on this server.
Does anybody know how to solve this?
You will have to contact the author of that tutorial and ask. Apache can be configured an infinite number of ways. You seem to be attempting to configure it in two conflicting methods. You can define specific directories on your web server or you can use mod_userdir. You can't hack up a combination of the two.
I posted my own User Tip on how to configure Apache: https://discussions.apple.com/docs/DOC-3083
This user tip only covers mod_userdir and will serve content out of $(HOME)/Sites. I strongly suggest starting there and only trying a custom location later, if you see the need. -
Hi guys:
I am setting up WLS domain on the sun box but running into following errors when starting up the weblogic admin server.
<Feb 16, 2006 9:20:11 AM SAST> <Error> <WLW> <000000> <Error in startup class com.bea.wli.init.WLIDBCreate Method: init:
com.bea.wli.init.WLIDBCreateException: At least one WLI data base object (TABLE WLI_USER) was missing
at com.bea.wli.init.WLIDBCreate$WLIDataSource.checkDBObjects(WLIDBCreate.java:880)
at com.bea.wli.init.WLIDBCreate.init(WLIDBCreate.java:999)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wli.init.BPMStartupShutdown.invoke(BPMStartupShutdown.java:421)
at com.bea.wli.init.BPMStartupShutdown.startup(BPMStartupShutdown.java:284)
at com.bea.wli.init.BPMStartup.main(BPMStartup.java:23)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.t3.srvr.StartupClassService.invokeMain(StartupClassService.java:229)
at weblogic.t3.srvr.StartupClassService.invokeClass(StartupClassService.java:160)
at weblogic.t3.srvr.StartupClassService.access$000(StartupClassService.java:36)
at weblogic.t3.srvr.StartupClassService$1.run(StartupClassService.java:121)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.t3.srvr.StartupClassService.invokeStartupClass(StartupClassService.java:116)
at weblogic.t3.srvr.StartupClassService.addDeployment(StartupClassService.java:88)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
:Did you see the directions on page 3-11 of the WLS 6.0 Administration Guide? I
followed these steps, and was able to create a new domain. I found them to be
clear.
Laurel
"Jesper de Jong" <[email protected]> wrote:
>
Hello all,
Instead of working with "mydomain" and "myserver" I want to create my
own domain.
IMHO, the documentation on e-docs is not very clear on the steps that
are necessary
to do this.
What are the steps, or where can I find better documentation on creating
a domain?
regards,
Jesper -
WebLogic 9.2 with Apache Connector Config
Hi I am new to this forum, WebLogic, and all Oracle products for that matter. I am a college intern and I have been asked to learn how to use WebLogic 9.2. I was told that they want it to be connected to apache with the mod_wl_22.so shared module for Apache. I have placed the module in the directory and added the LoadModule line to the httpd.conf file and the module loads fine. From reading through the WebLogic documentation I now know that I need to create a <Location> block in httpd.conf for the connector. I also know that the arguments that you need to use are WebLogicHost and WebLogicPort. So in my httpd.conf I have added the following.
<Location /weblogic>
WebLogicHost 10.15.107.90/weblogic
WebLogicPort 7001
</Location>
I also tried.....
<Location /weblogic>
WebLogicHost /weblogic
WebLogicPort 7001
</Location>
and.....
<Location /weblogic>
WebLogicHost 10.15.107.90
WebLogicPort 7001
</Location>
All with no luck. When I browse to http://10.15.107.90/weblogic I get nothing. Can anybody help me out here?
Thanks
ScottHi,
This is a template for 'httpd.conf'. Please make it sure that you are following this:
===
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName beatest.kpit.com:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7004
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
MatchExpression /*
</IfModule>
<Location />
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005
Debug ALL
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
DebugConfigInfo On
PathTrim /
DynamicServerList OFF
</Location>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
Maybe you are looking for
-
Cannot Open Attachments within a pdf document
Dear Staff, In my windows 7 netbook I can open files attached to PDF documents is there a reason why I cannot open these files within windows 8.1 RT with the adobe Reader Touch? is there any setting to adjust to have this function active or Adobe Re
-
Does Airport Express support multiple ethernet connections via a switch?
If I use the following configuration, with the Airport Express extending my network, will it handle multiple devices connected via a switch? Modem---Airport Extreme- - -802.11n- - -Airport Express---Switch---multiple devices (eg. network printer and
-
Mass downloading of Documents from DMS
Dear SAP gurus, How to download the multiple documents from DMS in one step? Thanks in advance. Venkat
-
Migration of DNS from Windows 2008 R2 to Windows 2012
Hello, We have a pair of Windows 2008 R2 servers running authoritative DNS services (they are not AD controllers, neither used as resolvers). There are ~20 domains + 10 DNSSEC domains hosted on those servers. We're considering to migrate them to Wind
-
How to get tab delimited text file when Stored Procedure executes ?
Hello Everyone, I have a stored procedure which returns 1 result set as an output. I want the output as a Tab Delimited Text file. I know that I can use SSIS and get the same output but I am not allowed to use SSIS in this case. Is there any other wa