Steps to setup test

We've got an Oracle 9i Rel 2 database server with a database that we'd like to synch with a laptop application using .Net and Windows Forms. What needs to be installed where? And, how do I get an initial copy of the database from the server to my 9i Lite database on the laptop? Thanks in advance for the help

Don,
I don't work on the product but I played around with .net a bit. Recently tried out the ADO.NET on Oracle Lite.
1. Install Mobile Svr (in another home or you might have to change the tnsnames)
2. Check out the Chp1 in Win32 Guide. There is a walk throu' on how to publish an remote app. (the Mobile Field Service sample)
If you ran throu' the sample, you should be able to get Oracle Lite installed on your laptop (+ other sync utilities).
For me, I modified the Clockin sample (inside the 5.0.2.0.8 's ADO.NET dir) and published Oracle.Lite.Data_win32.dll (not Oracle.Lite.Data.dll, unless you are using WinCE) & the modified .net app on my laptop.
Then you should be able to run the .net app on your laptop. Modify the data in the Lite db & use a exe called msync.exe to sync up with the Mobile Server (or use the class LiteConnection.Sync, which I still have trouble getting it to work), then you should see the changes in the db.
Arnold

Similar Messages

Steps to setup JDeveloper 9i to modify and test the iPayment servlets

Hi,
I am working on modification to iPayments module of EBS Release 11.5.9. We need to modfiy part of code in Paymentech BEP (Back End Payment) servlet.
Could anyone please let me know the steps to setup JDeveloper 9i to modify the servlet code, test and debug the changes from JDeveloper. It would be really helpful if you could point me to some document which has the details of the process.
Appreciate your help.
Thanks,
Navadeep

Navadeep,
Short answer: I don't have such a document, nor do I know where to find one.
Since most of the people who regularly monitor and post to this forum don't work with the E-Business suite (at least not iPayment) - I don't feel you'll get a good response here. I hope someone can prove me wrong. The best place to find this information is the E-Business Suite forums or perhaps Metalink.
Furthermore, I don't believe that Oracle supports modifying the supplied iPayment servlets. So, I think Metalink is the right place for you to start.
John

Steps and setup for Creation of Project Contract from Scratch

Dear All,
Steps and setup how to create contract from oracle project contracts?
Thanks
HNP
Edited by: user12197222 on Aug 1, 2012 1:30 AM

Please refer Ch 2 Creating New Contract Documents on below link from user guide:
http://docs.oracle.com/cd/B11454_01/11.5.9/acrobat/115okeug.pdf
thanks

What are the steps to setup an HTTP Session replication clustering in oc4j9

what are the steps to setup an HTTP Session replication clustering in oc4j9.0.5

Are you sure you have the correct version number for OC4J? Is this a standalone OC4J instance, if it then the steps involved are different from the full stack. Please check the Higher Availibility guide in the documentation on OTN.
Deepak

Steps to setup MML on veritas Netbackup to perform rman restore from tape

RMAN backup is taken to tape...
can anyone please give the steps to setup the MML on veritas Netbackup ...
and also the steps to perform rman restore from tape to a new server ....
Thanks in advance

can u please answer them ..
1)how to find out that the which tape is mounted on a backup server ?? command please ....
2)how to find out that the rman backup was successful on the tape ?
3)how to find out what are the tapes involved in that backup ?
4)do u have to the create a auxillary database while restoring from rman by tape to a new server ?
5)is there a way to findout how many GB completed in x timeframe by RMAN on oracle 11.2.0.2/10g and and oracle 9i during the backup process ??
and also please answer ...
#)RMAN backup is taken to tape...
can anyone please give the steps to setup the MML on veritas Netbackup ...
and also the steps to perform rman restore from tape to a new server ....
and
#)--- can i know the steps for the MML
CATALOG command to define new locations
----May i know the commands

Steps to setup descriptive flexfield or/and key flexfield.

Where can i find white paper or document other than the user guide in metalink or any other source which talks about steps to setup a descriptive flexfield or/and key flexfield.

Hi,
You might wanna check out following documentation.
http://download-east.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/flexnav.htm#contentsFX

Need to know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8

Hi,
Could you please let me know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8(PeopleTools 8.48)?
Thanks

PeopleBooks > PeopleSoft Enterprise CRM Automation and Configuration Tools PeopleBook > Configuring Search Pages
Nicolas.

Can I create a custom setup test for Adobe Connect Pro?

I was wondering if there was a way to create a custom setup test for Adobe Connect Pro? We are using Adobe Connect to teach some web courses and we need them to complete the Adobe Connect test as well as some other software setup tests. Due to the fact that we are using a company wide account for Adobe Connect the "Send Results" button on the setup test doesn't reach me (I am the one in charge of making sure all students have taken all the setup tests). Typically we have them take a test and then return back to the main 'test' page where they select whether or not the test worked.
In the end I figure I have two options:
1. Change the test so that it emails the responses to the email of my choice, i.e. a custom version of the setup test. (Not sure if this is possible as we use a company account)
2. Completely remove the "Send Results" button from setup test and just rely on the student manually entering whether the test worked or not.
Please help!

The timecode effect can only show whole frames so there is not a setting for 23.97. I'm not at my editor at the moment, is there an option for 'drop frame' in the timecode settings, this is how timecode is displayed for non whole number frame rates.

AOL printer setup test

Hi All,
how to do Oracle Application Object Library Printer Setup Test in R12
Thanks in advance,
Vinay

Hi Vinay;
please check:
11i : Oracle Application Object Library Printer Setup Test [ID 200359.1]
11i : Oracle Application Object Library Printer Initialization String Setup Test [ID 234606.1]
How To Determine Printer Setup Used When Printing For A Particular Concurrent Request [ID 416224.1]
How to Setup Printer for Oracle Applications 10.7 - 11.5.x Quick Reference [ID 123140.1]
Hope it helps
Regard
Helios

Using pre-step callbacks to setup test conditions

I am trying to setup a pre-step callback to verify test conditions and correct them if they do not match the needs of the applicable test step. I was going to assign the test conditions in the pre-expression of each test step, but unfortunately I have found that the pre-expression executes AFTER the pre-step callback. Is there any way to get around this? How can I get around this? (i.e. to assign step specific variables before executing the pre-step callback).
Thanks,
Sean
Solved!
Go to Solution.

I have done some hacking of preconditions, and its even easier than the example above. Remember that in TestStand expressions the comma (,) separates logical expressions. But the return value of the expression is always the return value of the last expression. So if you separate two logical expressions in the preconditions with a comma, only the return value of the second one gets used as the precondition.
For instance, if you always want the step to run, you could use:
locals.myVar = 5, True
Or if you already have preconditions:
locals.myVar = 5, AllOf(RunState.Sequence.Main["ID#:"].Result.Status == "Passed", RunState.Sequence.Main["ID#:"].Result.Status == "Passed")
Also, there was some discussion of what order a step executed its actions. You can find this information in the TestStand Reference Manual in chapter 3. There is a table that lists the exact order of operations, including when the pre-step engine callback is fired.
Josh W.
Certified TestStand Architect
Formerly blue

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

What are the steps to setup JavaMail in JDeveloper for Oracle Portlet??

Dear all,
I had got a problem in using JavaMail in JDeveloper.
I am developing a Oracle portlet (actually, it is an online applicatin form for user submission.).
After user submitted the form, the portlet will send email automatically to someone else for notification. The logic is straight forward.
I faced a problem on how to setup the environment for calling JavaMail API.
As far as I know, JavaMail is included in J2EE platform, so I guess I need to put JavaMail classes in the import directives, i.e.
import="java.util.Properties"
import="javax.mail.*"
import="javax.mail.internet.*"
But, when compile the program, error messages are resulted that JavaMail classes not found.
Can anyone help me?
thanks
George (HK)

Dear all,
I switched to use the utl_smtp package for my portlet email function instead of using JavaMail in Portlet.
But, I still want to know the steps and procedures which I need to take in order to invoke JavaMail in Oracle Portlet development. Anyone any ideas?
thanks a lot
George (HK)

Step to setup the Dataguard in 11.1.0.7

Hi
We have completed our upgradation to R12.0.6 and 11.1.0.7 on server A(Appl),ServerB(DB) and we need to set up the dataguard on server c , can some body gives me the detail steps required for setup and failover check to carried out in this process. or please give me some pointers to this
Regards
SAN

Hi,
I believe the document for configuring Data Guard on R12 with 11g database installed is not yet available. However, you may refer to the following documents as the steps should be the same.
Note: 452056.1 - Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=452056.1
Note: 753241.1 - Case Study : Configuring Standby Database(Dataguard) on R12 using RMAN Hot Backup
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=753241.1
Log a SR, and check with the support whether this document will be released or using the above documents is enough.
Regards,
Hussein

CAN'T GET PAST STEP 8 SETUP CD

I have a WRT54G router. After a couple of months I started having problems accessing the internet. I started all over again, installing the router rom scratch. However, I can't get past step 8 of the installation process. The setup program prompts me for a password. I enter "admin" and it starts checking for computer settings. After it reaches 100%, it prompts for the password again and then the process start all over. It never stops asking for the password.
I try to exit, but I get a message saying "installation incomplete". HELP PLEASE!!!!!!!!!!!!!!!

You had a password setup on this router when you initially setup this router. You need to provide that password. If you don’t remember the password then you may need to hard reset the router by pressing the reset button at the back for 1min and then try again. This time it should accept the admin password.

Steps to setup and configure Node Manager on local and remote machine

Hello,
I am using WLS 10.3 on Windows.
I have two machines, One cluster and two managed servers (one on each machine) created under a domain. I have used configuration wizard to create the domain.
I have gone through documents on Node Manager and found what to configure. But I have not found when to configure. In other words I want to know what is the sequence of steps if I have to set Node Manager on my local machine (in which domain exists) and on remote machine.
Please let me know the sequence of steps I need to follow to set and configure the Node Manager on local and remote machine. I want to use Java Node Manager (not the Script node manager).
Thanks,
Sanjay

Hello,
Ok, let me tell you what I have done till now.
1) Installed WebLogic 10.3 on machine A (local machine, on which I have created domain and my Admin Server is running. Also Managed Server 1 is created on this machine).
2) Installed WebLogic 10.3 on machine B (remote machine, on which Managed Server 2 will be created).
3) On machine A I used the configuration wizard and create a domain. While creating the domain I did the following:
i) Created two managed servers.
ii) Created a cluster
iii) Assigned Servers to cluster.
iv) Created two machines.
v) Assigned servers to machines (Admin Server and MS_1 to machine A and MS_2 to machine B).
4) Sarted Admin Server.
5) On the Admin Console I made some configurations for the Node Manager on Machines -> Machine A -> Node Manager. Assigned the values:
i) Type (SSL)
ii) Listen Address (IP_Address of machine A)
iii) Listen Port (5556)
6) Similarly did for Machine B.
So till now phsically the managed server (MS_2) directory and configuration is not there on Machine B (its only configured on machine A because I created the domain on Machine A).
Now I want install/configure/setup NM on both the machines. Start my both the managed servers using Admin Console (which will use the node managers).
What are the sequence of steps I need to follow my task?
Any help and suggestions are welcome with warm regards.
Thanks,
Sanjay

Steps to setup test

Similar Messages

Maybe you are looking for