Steps to upgrade HFM (EPMA) from 11.1.1.3 to 11.1.2.1/11.1.2.2

Hi,
Can someone please let me know how to upgrade the EPM-HFM application in 2/3 steps.
I know how to upgrade if it is classis application just by upgrading the database in EPM System Configurator.
What happens or need to be done if it was built in EPMA? Just upgrade schemas of both EPMA & HFM in Configurator?
Any pointers are appreciated!
Thanks in advance,
PM

Please post this to the HFM Discussion Forum, this is the FDM Discussion Forum.

Similar Messages

Steps to upgrade Oracle database from 11.2.0.3.8 to 11.2.0.4.0

Hi Support,
Could anyone please provide the steps to upgrade Oracle Database EE from 11.2.0.3.8 to 11.2.0.4.0.
Thanks
Imtiyaz

You will need to install 11.2.0.4 into a new ORACLE_HOME, apply the latest 11.2.0.4 PSU patch to the new ORACLE_HOME (see MOS Doc 1454618.1) and then follow the steps in the Upgrade Guide
http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#UPGRD003
see MOS Doc 1189783.1

Steps to Upgrade Oracle EBS from 11.5.10.2 to 12.1.3

Hi all,
Could anyone help me with the documentation of Upgrade from 11.5.10.2 to 12.1.3.my OS is Linux 5 and my database is 10g.I also need the steps involved in going through the upgradation process.
Thanks
Venkat

Hi;
>
Could anyone help me with the documentation of Upgrade from 11.5.10.2 to 12.1.3.my OS is Linux 5 and my database is 10g.I also need the steps involved in going through the upgradation process.Similar issue mention here many times. Please check below link and refer doc.
Simply process:
1. Upgrade your db
2. Upgrade your EBS from 11i to R12.1.1
3. Apply patch 12.1.3
11.5.10.2 to R12
Re: Upgrade 11.5.10.2 to R12
11.5.10.2/9iR2 to R12/11gR2
Re: 11.5.10.2/9iR2 to R12/11gR2
11.5.9 to 12.1.1 upgrade
Re: EBS 11.5.9 to 12.1.1 upgrade
Regard
Helios

What are the steps to upgrade oracle clusterware from 10.2.0.4 to 11.2.0.2.

We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
Regards
Naveen Dutt

Hi Rajeys,
I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
1) No of Node in cluster - 2 (node1 ,node2)
2) OCR (clusterware) version - 10.2.0.4
3) Storage type - NAS storage (we are not using ASM).
Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
Thanks in advance
Regards
Naveen Dutt

Upgraded HFM apps from 9.3.1 to 9.3.3 and now I cannot open the app.

I've upgraded 9.3.1 to 9.3.3 and when opening upgraded app (both from Workspace and thick client) I'm getting following error message:
'An unexpected database error occurred. Check event log for details. (-2147220900)
Looking at the HsvEventLog:
<?xml version="1.0" ?>
<EStr>
<Ref>{98CDC197-A9C9-4730-A4CB-2A5A7BE721CB}</Ref>
<User>ORA-14457: disallowed VARRAY and Nested Table column in a Temporary table</User>
<DBUpdate>13232944</DBUpdate>
<ESec>
<Num HEX=0x80040E14>-2147217900</Num>
<Description Src=ADO>One or more errors occurred during processing of command.</Description>
<Type>1</Type>
<DTime>20/10/2010 6:22:03 PM</DTime>
<Svr>ADELN195</Svr>
<File>CHsvDSICM.cpp</File>
<Line>6789</Line>
<Ver>9.3.3.0.2853</Ver>
<DStr>CREATE GLOBAL TEMPORARY TABLE TEMP_VARRAY_TABLE (DIMID NUMBER, DIMARRAY TYPE_NUMVARRAY) ON COMMIT PRESERVE ROWS</DStr>
<ExErr></ExErr>
</ESec>
</EStr>
Has anyone seen this issue before?
Database is: Oracle 9.2.0.8 (validated with support matrix as a supported version)
Cheers,
Edited by: user8640150 on 20/10/2010 15:42

This issue is now resolved and I would like to share with others.
This issue occurs when HFM application is upgraded to 9.3.3 on Oracle 9i database. There is a patch 9.3.3.0.03 to resolved the issue.
Cheers, Louis

Steps to upgrade Bw Objects from BW 3.5 to BW 7.0

I have upgraded a NW2004(BW3.5) system to NW2004s(BW 7.0) .
After upgrade i see that the infocubes, infoobjects are still in BW 3.5 Concept itself.
When i open each object and save it , it is changing to BW 7 Object. But there are about 10000 objects. Please let me know the steps to upgrade the Objects to BW 7.0

Just upgrade.
There are some guides in service.sap.com and lots of notes on upgrade.
Reg efforts, it is totally dependent on the no of objects, etc to upgrade / convert and so many other factors. Even a rought estimate will not be possible without the knowledge of the system.
Ravi Thothadri

Steps to Upgrade to Leopard from 10.39 ~please~

Hello all, thanks in anticipation that someone will help me upgrade or know what are the cheapest steps to take to do so and enable me to use the "MacFamily Tree 5" please. I wanted to buy a version of it for my OS X 10.3.9 but cannot find it at the Apple site now. I would like to upgrade this computer to the latest version and to have 'Windows' would be cool. How do I check if I have enough space in the Hard Drive for upgrades though? I only use my puter for online stuff mainly. Thank you for any help you can offer me

freedone,
Your Non-Intel PPC iMac can only be upgraded to Tiger 10.4.x, as it does not meet the Leopard System Requirements.
-Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster processor) Yours is 600MHZ, which cannot be upgraded.
-512MB of memory You have 256MB, which you can add to, and should, if you install Tiger 10.4.x.
-DVD drive for installation The 600MHZ iMac, shipped with a DC-RW drive, so unless you have replaced it, with a DVD drive, you do not have one. There are alternate methods of installing Tiger 10.4.x, without one though. More info posted below.
-9GB of available disk space You currently do not have sufficient available free space. More info posted below.
With some upgrading of the iMac's Hardware, to meet the Tiger System Requirements, you can upgrade to that version. More info posted below.
"...19.07 GB 837.7 MB free."
You are dangerously low on available Hard Drive free space!
Backup the system ASAP, and then create additional drive space!
Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Depending on Mac system usage habits, it is a general recommendation, to keep 10% to as much as 20%, of the Total capacity, available at all times.
Review the suggestions, in the documents that I have linked to below.
Authored by Dr Smoke:
Problems From Insufficient RAM And Free Hard Disk Space
Freeing Space On Your Mac OS X Startup Disk
Mac OS X 10.3/10.4: System Maintenance, authored by Gulliver
Maintaining Mac OS X, authored by Dr Smoke
Is the Mac shutdown overnight, or does it run 24/7?
Have you ever run any routine Maintenance procedures?
If you turn the PowerBook off nightly, the Background Maintenance Tasks, are never run.
These can also be run, using a Third-Party utility, or manually using Terminal, to run the CRON Commands.
I use MacJanitor, when necessary.
INSTRUCTIONS TO RUN CRON MANUAL COMMANDS
Quit all applications/programs.
Navigate to HD > Applications > Utilities.
Double click on Terminal, to open.
At the prompt, type:
sudo periodic daily
Press Return.
Enter your Admin password when prompted, then press Return.
This will execute the daily script that is sheduled to run every night.
When completed, repeat this procedure, but change the command to:
sudo periodic weekly
This one rebuilds a database or two, and usually takes somewhat longer to complete. It is scheduled to run once a week.
Repeat again, with command:
sudo periodic monthly
Or they can all be run in one pass, which is preferable, with this command:
sudo periodic daily weekly monthly
When the tasks complete, and return to the prompt, you may quit Terminal.
Restart the Mac, and run Repair Permissions.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP, until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
Mac OS X Versions 10.1, 10.2, 10.3, 10.4, and 10.5, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), 10.4.x to 10.4.11 (Pending), and 10.5.x to 10.5.1 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can be purchased, sometimes less expensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, AllMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
The disc should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on it.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor!
If any are presently available, examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Tiger On eBay
Once Tiger 10.4.x is installed, you can use the PPC 10.4.11 Combo Update, to upgrade to the current version.
Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
Info here Installing Tiger Using Firewire Target Disk Mode.
And here Installing Tiger Without A DVD Drive.
The Tiger Media Exchange Program, referred to, is no longer available.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Steps to Upgrade from DS 5.1 SP2 to DS 5.2 SP6

Hi Everyone,
Could someone please provide me with the steps to upgrade the server from Sun One Directory Server 5.1 SP2 to Sun One Directory Server 5.2 SP6. Please provide me with the documentation if any.

Follow this guide.
http://docs.sun.com/source/816-6699-10/migrate.html#14992
-Akshay

I recently upgraded my Mac from Safari 10.5.8 to 10.6.8 Everything seems to run well except my computer is now blocking plug-ins. When I go to Safari preferences to reset this Safari shuts down. Any help would be welcome.

I recently went through the steps to upgrade my OS from 10.5.8 to 10.6.8 so that I could install Adobe Light Room 4. Everything seems to work well with the exception that now my computer will not allow any plug-ins. I have tried to access Preferences in Safari and every time I do my Safari shuts down. Any suggestions?

Hey Poppingcork,
I found an article that might be of assitance. While it doesn't address Adobe Light Room, it does discuss plug-in issues and how to troubleshot them.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/TS3230
Hope that helps,
David

Upgrade ASM alone from 11.2.0.3 to 11.2.0.4 without RAC

Hi Viewers,
Can anyone provide me a steps to upgrade ASM instance from 11.2.0.3 to 11.2.0.4 and RAC is not configured.
Please share the steps or document to upgrade ASM instance in Linux.
Thanks,
Anil

When you download the patchset, it include documentation about how to perform the upgrade.
In Metalink there are several notes, I thin this is interesting, Doc ID 1434351.1
HTH - Antonio NAVARRO

Steps to upgrade RMAN catalog schema from 10.2.0.4 to 11.1.0.7

I am looking for steps to upgrade our catalog database schema from 10.2.0.4 to 11.1.0.7. We want to register our prod 11g target database into our EM Repository 10.2 catalog database.
Can you please refer to doc / metalink note to upgrade 10.2 database catalog schema to 11g schema?
Thanks in advance.

See this article:
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcatdb.htm#i1007125
Werner

Steps to upgrade database from 9i to 10g on 11.5.9

Hi Guys,
I hope you are all doing ok.
please I need to upgrade my database from 9.2.0.6 to
10G (version 10.2.0.2)
platform is : 11.5.9
OS: Solaris
Please what are the steps to do this and is there a
documentation or metalink note for this upgrade?
Thanks in advance

Follow the latest 10gR2/11i Interoperability Notes (362203.1)
Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)
http://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=362203.1
10.2.0.3 is the latest certified release. On Solaris, there will be many new ORA-00600 errors if you do not apply the following 2 patches (5871314 & 5892355) from this note:
ORA-600 [22635] and ORA-600 [KOKEIIX1] Reported While Upgrading Or Patching Databases To 10.2.0.3
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412271.1

Steps to upgrade vsom from 6.3 to 7.2

Hi All.
one of our customer needs to upgrade his existing vsom and vsms from 6.3 to 7.2 and he
has purchased the below licenses and he dont need any of the existing data.
L-CPS-M-OM-SW7
L-CPS-M-MS-SW7
L-CPS-M-SASD-7.
as this is the first time I am upgrading to 7.2 can anyone please help me in this regard with simple steps to upgrade to 7.2 and do we need any other things apart from the above licenses

Looking at your licensing, it appears that you have a fairly simple environment. If so, this doesn't have to be complex at all since the customer doesn't need any of the existing data. The simple solution would be to document your settings, approach this as a fresh install, and put your settings back.This will bypass any need for migration tools that might be needed to convert your database and save archives. I have no experience with these tools, so I'm not sure of their full capabilities.
About a year ago, due to learning the system and some poor configuration choices on the disk, I needed to migrate my 7.0 cameras to a new 7.2 system that was configured correctly. Here's how I did it.
1) Document, document, document. Take screenshot of all your settings. Take a backup of the database. Document the number of cameras you have, the number of templates, number of encoders, etc. This data will be used for verification after your migration.
2) Connect to the MySQL database and write queries to obtain the necessary information that is needed to do a bulk import (using Excel) of your cameras, encoders, templates, etc. Below is the SQL I used for my IP cameras. Note: Since analog cameras are configured differently, I used a seperate SQL for these. You should have a seperate SQL for each device type. Copy the results into an Excel spreadsheet.
****** List IP Cameras **********************
select a.name, a.model,
       d.ipaddress,
       e.name as 'Template',
       f.name as 'Server',
       (select name from groupinfo where objectid = a.location_objectid) as 'location',
       (select name from groupinfo where objectid = a.pointtolocation_objectid) as 'pointToLocation'
from camera a,
     networkconfig b, networkconfig_network_interface c, network_interface d,
     devicetemplate e,
     server f
where a.networkconfig_objectid=b.objectid and
      b.objectid=c.networkconfig_objectid and
      a.networkconfig_objectid=b.objectid and
      c.networkinterfaces_objectid=d.objectid and
      a.devicetemplate_objectid=e.objectid and
      a.managedby_objectid=f.objectid and
      a.objecttype=6
order by location;
3) Build out the new system using VMWare (or some other virtualization solution) to test your configurations that you saved in Excel. (This will also let you get the new spreadsheets so you can know what data you need for the import.) This will help you ensure that you do not have any syntax errors. For us, we were migrating from virtual to virtual, so the system we tested on became our new PROD and we simply deleted the old VMs after verifying the new worked. Do not have your cameras run on both systems though. From my experience, you will be fine to pre-provision the cameras to the test system, but do not have streams going to both simultaneously.
4) After you have tested your install and configurations, perform a full install on your Production system and load your configs.
This process worked extremely well for me because we have a fairly simple configuration. All our cameras are Cisco except for a few analog cameras that have been connected to Cisco-encoders. We have only two templates, which we documented manually instead of writing SQL since there were so few. Since we were virtualized, we could easily keep PROD up while we pre-provisioned the new system. If something didn't work, we could easily revert to the old system. I highly recommend testing this in a virtual lab first, because from my experience, I had to go through a couple of iterations in my SQL code to format the data and capture what was needed properly. The syntax can be a bit tricky your first time through. Also, verify (using the 7.2.1) release notes that all your devices are supported and at a supported level of code. For us, some of our cameras were not at supported levels and experienced dropped frames every few seconds until we upgraded these to supported code.
If your config is complex and you don't feel comfortable with the above steps, I recommend going with Scott's solution and seek help from a third party. Also, according to my recent conversation with TAC, skip 7.2.0 and go straight to 7.2.1. Apparently, there was a bad bug in the first one that, if encountered, could result in the loss of archives.
Hope this helps.

Steps to upgrade from 8i to 10g

i look for some documents about this topic 'steps to upgrade from 8i to 10g' but i couldn't find in the site...
would you mind tell me where can i find a complete document , or if you can tell me in details please.
thanks alot in advance

http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10763/toc.htm
Nicolas.

Steps to upgrade from 8.81 PL01 to 8.81 PL05

Hi,
Please could someone help with steps to upgrade SAP Business One from 8.81 PL01 to 8.81 PL05. I have the 8.81 PL 05 downloaded available with me now.
Thanks in advance!!!!

Hello
Steps:
1. Extract patch
2. Open patchreadme and read the first page, You can see the following:
You can upgrade your SAP Business One to 8.81 PL05 from the following versions:
o 8.8 PL21 and lower
it means you can go ahead from 8.8 PL 01 to 8.81 PL 05
Start upgarde exe, and follow the instructions on the screen. Basically you must upgrade everything.
Regards
János

Steps to upgrade HFM (EPMA) from 11.1.1.3 to 11.1.2.1/11.1.2.2

Similar Messages

Maybe you are looking for