Steps to upgrade kernel patch in AIX cluster environment
Hello All,
We are going to perform kernel upgrade in AIX cluster environment.
Please let me know the other locations to copy the new kernel files ,
default location
CI+DB server
APP1
Regards
Subbu
Hi Subbu
Refer the SAP link
Executing the saproot.sh Script - Java Support Package Manager (OBSOLETE) - SAP Library
1. Extract the downloaded files to a new location using SAPCAR -xvf <file_name> as sidadm.
2. copy the extracted files to sapmnt/<SID>/exe
3. Start the DB & Application.
Regards
Sriram
Similar Messages
-
Steps for upgrading kernel (ABAP+JAVA)
Hi All,
Could you pls let me know the steps required for upgrading kernel (ABAPJAVA). For ABAP I know the steps but I am confused about (ABAPJAVA) Instance.Recently we faced issues regarding startup of java server after upgrading ABAP stack .
Regards,
PrashantThis question has been asked gazillion of times.... did you do a search before posting?.... obviously not.
Use the Search in the top-right side of the page. You'll be amazed with the amount of info available.
Regards
Juan -
Kernel patch 138888 breaks cluster
I am trying to set up a cluster between guest LDoms on two physical 5140 servers. Without the kernel patch 138888 -03 everything works fine. When I install the patch before or after the cluster is created, it results in the two LDoms not being able to communicate over the interconnects, reporting that one or the other node is unreachable.
Does anyone know why the patch causes that problem and if there is a fix? I'm leaving the patch off for now.
Thanks.[PSARC 2009/069 802.1Q tag mode link property|http://mail.opensolaris.org/pipermail/opensolaris-arc/2009-February/013817.html]
-
Backup error after kernel patch upgrade
Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch -
Kernel patches = total downtime?
We are preparing to install errata patches for RHEL4 and I am trying to find any documentation that might tell me whether or not we need to bring down a cluster to install the kernel patches. I remember hearing somewhere that most OS kernel patches require the cluster to come down because each node must be at the same level. How do I determine if this applies for the patches at hand?
kernel-largesmp-2.6.9-67.0.1.EL.x86_64.rpm
oracleasm-2.6.9-67.0.1.ELlargesmp-2.0.3-1.x86_64.rpm
ocfs2-2.6.9-67.0.1.ELlargesmp-1.2.7-1.el4.x86_64.rpm
TIAOracle Support.... or lack thereof. They said they do not test everything in house, so I would have to test on my own. Obviously, I wound up with one of those front-line people.
Anyway, I did test the rolling patch on my end and it appears to fine. -
Dear Experts,
I just upgraded kernel patch level to the latest one, i.e. 254, however the EWA report still read the old patch level (Your SAP kernel release (release 700, patch level 254) is not up-to-date).
Do we have to upgrade the ST_PI and/or PI_BASIS, the status is as follow:
SOLMAN:
PI_BASIS 2006_1_700 0008 SAPKIPYM08
ST-PI 2008_1_700 0000
Satellite:
PI_BASIS 2005_1_700 0010 SAPKIPYJ7A
ST-PI 2008_1_700 0000
Please advise.
Thank and Regards,
RudiHi,
This "outdated check" is based on the compiling date of the
'disp+work package' of the kernel. The rules for how many days mean
outdated depend on the kernel release and the ST-SER Release and SP
running on the Solution Manager.
Please find below some corrections that extent the rules for beeing
up-to-date:
1076235 - RED Rating in Software Configuration, Kernel 700 old
1301137 - ST-SER 2008_2 SP02: Further Corrections
1304151 - Service Assistent: Adjustments for Kernel Check
You may want to have the latest ST-SER version in order
to ensure that the latest corrections are implemented in your system.
Hope this helps.
Cheers
SH -
ABAP and Kernel Patches for Upgrade and Conversion in 4.6C
Hi,
We are in a process of upgrade and unicode conversion for the source release 4.6C (Kernel 46D_EXT Patch 2225).
"Combined Upgrade&Unicode Conversion Guide" for "SAP Basis 4.6C u2192 SAP NetWeaver 7.0 application Server ABAP Unicode Including Enhancement Package 1 Support Package 01 - 06" , In Software Requirements step, it says
"3. Import 4.6D Kernel patch 2326 from SAP Service Marketplace according to SAP Note 19466"
We wanted to know whether "IT IS ABSOLUTELY NECCESSARY TO GO FOR THE KERNEL PATCH 2326". We dont have "EBCIDIC code pages" in our MDMP system.
We need to know becauase we are also doing OS migration from AIX to Sun and this step will add to our production downtime.
Please advice what are the other causes we should go for the kernel 2326.
RegardsHello Mr. Nils Buerckel,
Thanks for the reply.
We wanted to be very sure whether we should used Kernel 46D Kernel patch 2326 (As it is specifically mentioned in the SAP CU&UC guide and in SAP Note 867193, It is mentioned that "This patch contains enhancements that are required to execute the "INDX Analysis" scan)
OR
Can we go for the latest kernel patch avaialable at market place? And Will the latest kernel patch also contains the "enhancements that are required to execute the "INDX Analysis" ?
Please reply
Thanks -
Kernel upgrade to patch level 196, ECC 5.0, MSCS resource issue.
Hi,
We have 3 system landscape DEV, QAS & PRD on win 2003, oracle 10G, ECC 5.0.
Our PRD system is on MSCS with CI on node A and DB on node B.
Recently I successfully upgrade kernel off DEV & QAS system to patch level 196 of stack 18.
When I tried to upgrade the kernel of PRD system one of the cluster resource drive (The drive contains the usr folder) is automatically moving from Node A to Node B and I got the error u201Capplication server shut downu201D. We donu2019t have additional application server in the landscape.
Please suggest the solution.
Regards,
RajeshHi Juan,
How are you? Thanks for your reply.
We are using ECC 5.0. I have found more errors in dev_w0 as follows,
ERROR => ShmCreate( ATTACH 62, 85588600) failed 1 [mpixx.c 843]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 3556]
in_ThErrHandle: 1
ERROR => tskh_init: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9621]
Info for wp 0
stat = 4
reqtype = 1
act_reqtype = -1
rq_info = 0
tid = -1
mode = 255
len = -1
rq_id = 65535
rq_source = 255
last_tid = 0
last_mode = 0
int_checked_resource(RFC) = 0
ext_checked_resource(RFC) = 0
int_checked_resource(HTTP) = 0
ext_checked_resource(HTTP) = 0
report = > <
action = 0
tab_name = > <
LOCATION SAP-Server sapcigrp_ECP_00 on host sapeccprddb (wp 0)
ERROR tskh_init: DpInitMpi
TIME Sun Nov 16 05:13:07 2008
RELEASE 640
COMPONENT Taskhandler
VERSION 1
RC 17
MODULE thxxhead.c
LINE 9806
COUNTER 1
PfStatDisconnect: disconnect statistics
Entering TH_CALLHOOKS
ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
TrThHookFunc: called for WP dump
ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed hxxtool3.c 254]
Entering ThSetStatError
Entering ThReadDetachMode
call ThrShutDown (1)...
***LOG Q02=> wp_halt, WPStop (Workproc 0 4000) [dpnttool.c 357]
Please suggest the solution
Thanks & Regards,
Rajesh -
Upgradation of kernel patch in clustred enviroment
hi
i have to upgrade the kernel patch from 144 to 205
we have a clustering in our production server
ECC6.0
HP-UX
Oracle 10g
can anyone guide me step by step how to do this .
regards
Aditya RathoreHi,
See the below threads,
[Kernel Upgrade on Solaris Cluster Failed;
Thanks
Shambo -
Kernel Patch upgrade results into error
Recently, we upgraded our R/3 640 kernel from patch number 196 to 327. It went successful.
But now, the Sales and order team is having problem in saving the orders(VA02, VA01).
While saving Sales order, error pops up saying "dialog step number missing".
Kindly suggest.Hi ppl,
The problem has been resolved.
As i said, problem wasnt with the upgrade, but came thereafter, functional team faced issues while switching between the windows.
Problem was with the Gui level, it needed to be upgraded too after the kernel patch upgrade.
Thanks a lot for putting your thoughts.
Thanks -
Steps for Kernel Patch Updation on Solaris 10 X4100 with 2disks mirrored
Hi all,
I have Solaris 10 10/06 (118855-19) installed on one of the X4100 server. This is the time for me to update the latest kernel patch (118855-36). We have two disks mirrored. My questions are,
1) Do i need to detach any of the disk from the mirror before doing any patching.
2) Is it possible to install the patches without detaching any disks from the mirror. (i.e. installeing patch on mirrored root filesystem)
3) how to boot from the second disk in case the patch installation creates problem while booting up.
Any suggestions or steps which you have already implemented for the above scenario.This isn't really a question for this forum, you may be better to look at some of the sys-admin forums for a complete answer.
You should not need to break the mirror in order to apply the kernel patch, however doing so would allow for quicker recovery of the system should something go wrong during patching.
I would strongly advise that you read the special install instructions for the kernel patch prior to installing it.
http://sunsolve.sun.com/search/document.do?assetkey=1-21-118855-36-1
You may also wish to use a patch cluster rather than smpatch/updatemanager, these can be downloaded from SunSolve:
http://sunsolve.sun.com/private-cgi/show.pl?target=patchpage -
Apply one non-kernel Solaris10 patch at Sun Cluster ***Beginner Question***
Dear Sir/Madam,
Our two Solaris 10 servers are running Sun Cluster 3.3. One server "cluster-1" has one online running zone "classical". Another server
"cluster-2" has two online running zones, namely "romantic" and "modern". We are tying to install a regular non-kernel patch #145200-03 at cluster-1 LIVE which doesn't have prerequisite and no need to reboot afterwards. Our goal is to install this patch at the global zone,
three local zones, i.e., classical, romantic and modern at both cluster servers, cluster-1 and cluster02.
Unfortunately, when we began our patching at cluster-1, it could patch the running zone "classical" but we were getting the following errors which prevent it from continuing with patching at zones, i.e., "romantic" and "modern" which are running on cluster-2. And when we try to patch cluster-2, we are getting similiar patching error about failing to boot non-global zone "classical" which is in cluster-1.
Any idea how I could resolve this ? Do we have to shut down the cluster in order to apply this patch ? I would prefer to apply this
patch with the Sun Cluster running. If not, what's the preferred way to apply simple non-reboot patch at all the zones at both nodes in the Sun Cluster ?
Like to hear from folks who have experience in dealing with patching in Sun Cluster.
Thanks, Mr. Channey
p.s. Below are output form the patch #145200-03 run, zoneadm and clrg
outputs at cluster-1
root@cluster-1# patchadd 145200-03
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
145200-03
Preparing checklist for non-global zone check...
Checking non-global zones...
Failed to boot non-global zone romantic
exiting
root@cluster-1# zoneadm list -iv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
15 classical running /zone-classical native shared
- romantic installed /zone-romantic native shared
- modern installed /zone-modern native shared
root@cluster-1# clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
classical cluster-1 No Online
cluster-2 No Offline
romantic cluster-1 No Offline
cluster-2 No Online
modern cluster-1 No Offline
cluster-2 No OnlineHi Hartmut,
I kind of got the idea. Just want to make sure. The zones 'romantic' and 'modern' show "installed" as the current status at cluster-1. These 2 zones are in fact running and online at cluster-2. So I will issue your commands below at cluster-2 to detach these zones to "configured" status :
cluster-2 # zoneadm -z romantic detach
cluster-2 # zoneadm -z modern detach
Afterwards, I apply the Solaris patch at cluster-2. Then, I go to cluster-1 and apply the same Solaris patch. Once I am done patching both cluster-1 and cluster-2, I will
go back to cluster-2 and run the following commands to force these zones back to "installed" status :
cluster-2 # zoneadm -z romantic attach -f
cluster-2 # zoneadm -z modern attach -f
CORRECT ?? Please let me know if I am wrong or if there's any step missing. Thanks much, Humphrey
root@cluster-1# zoneadm list -iv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
15 classical running /zone-classical native shared
- romantic installed /zone-romantic native shared
- modern installed /zone-modern native shared -
Steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3
Hi,
I want the complete steps to Upgrade Oracle 9.2 to 11R2 on IBM/AIX 5.3 Non -RAC environment.
Also, I want the reasons to upgrade? What are the Advantages,Features and Benefits ?
Plz post the complete details here.
Thanks,
SaswatAll of the steps are documented in the Upgrade Guide - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
To upgrade directly (using DBUA or scripts) to 11gR2, you need to be at 9.2.0.8 version.
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#i1007814
HTH
Srini -
Solaris 10 kernel patch upgrade
Hi all,
i am in a process of upgrading the kernel patch of a solaris 10 x64 machine, the present kernel patch is "5.10 Generic_144489-06 i86pc i386 i86pc" the updated kernel patch that i am going to upgrade to is patch "144501-19".
could you please let me know if there is any special handling to undergo the upgrade or it is only sufficient to follow the 144501-19 README file?
i know that i should put the system on the single user mode level and i have to have a valid OS backup before doing the patchadd, but if i am missing anything else please let me know
thanksHello,
if you are having system filesystems (/ /usr /var ...) on software RAID1 devices, best practise is to split mirrors and have most recent actual copy of the system (or create current ZFS snapshot if using ZFS on root),patch it in single user mode or use Live Upgrade functionality and create alternate boot environment and patch the ABE on running system (you can find various info in Oracle Docs or get inspired by various blogs:http://nilesh-joshi.blogspot.com/2011/10/oracle-solaris-patching-using-live.html). I always patch kernel and other system components using PCA patching utility - have a look on project homepage http://www.par.univie.ac.at/solaris/pca/ it's really advanced and helpful tool. It can save you lot of time when solving dependecies and also downloading the patches.
Good luck -
Kernel patch upgrade for multiple instance
Hi expert,
I want to know will we follow the same process while upgrade the kernel patch only for Multiple ABAP STAK.
We have system which has 3 instances....................so my question is exactly where we ned to put the kernel files (Generlly it should be in /EXE or /RUN file)and in which instance.......1.If I copy the patches only in central instance will it affect to all other instances.....?
If you have configured your SAP system correctly then Yes, Kernel upgrade in Central Instance will reflect in Dialog Instances also.
2.what is the concept of SAPMNT..(/sapmnt/SID/exe ).........?
/sapmsnt/SID/SYS/exe -> to share the kernel across the instances
3.What is the difference between EXE and RUN directory ............will it make any difference if I copy into EXE folder instead of
/usr/sap/<SID>/SYS/exe/run is located on the host system of the R/3 instance and is for locally-stored executables
/sapmsnt/SID/SYS/exe/run -> Central Instance directory
/usr/sap/<SID>/SYS/exe - Dialog Instance directory
you can check the values of DIR_EXECUTABLE or DIR_CT_RUN (if you are using sapcpe) to determine the kernel directories for central and dialog instances respectively
Maybe you are looking for
-
Airport Express not recognized by Utility after changing security setting.
We use an Extreme with an Express to extend the network and run speakers. While trying to eradicate Airtunes dropouts I changed the security setting on the Express using the Airport Utility. After the update, the Express is no longer being recognized
-
I have a MacBook Air running MacOS 10.6.8 and am using FireFox 3.6.17. I get an auto upgrade popup suggesting that I upgrade to 3.6.20. However, when I select to perform the upgrade, the download box comes up and acts like it is downloading, but it n
-
Which is better A-A or A-S with IPMP link based?
Hello. I'd like to know good configuraion with IPMP link based. I know there are 2 options, Active-Active and Active-Standby. Which is better? Actually I think A-A is better. Because if I use A-S option, you can not see the up status with secondary n
-
Hi All, Can anyone help me out in listing out all the new features available in ECC 6.0 for Finance users which do not need any implementation effort and which can be used directly? For eg: I am looking for any new features apart from New GL. New GL
-
Configure Read-Acces via user-defined privilege level
Hello everybody, I´m looking for the best configuration to restrict a user to read-only. The restriction should be configured via CLI not TACACS+. Hardware: 3750 (probably not interesting for this question) Oldest IOS: 12.2(53)SE1 The user should be