Steps to upgrade WS-C6509-E with 720 supervisor

Need steps to upgrade ios on WS-C6509-E
Dram size is 512 Mb
current image is loaded on sup-bootflash: 65536000
Question:
1 step to load ios , do we need to update boot room image
2 difference between bootflash and sup-bootflash:

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Hmm, older sup720s came with 64MB flash, which is insufficient for the later IOS images. There's, I believe, an upgrade kit to change your sup-bootflash to a (CF) sup-bootdisk, which can be much larger than 64 MB. Or, the sup720 has two external CF sockets, either of which can be booted from.
Do you need to upgrade your ROM? Probably not, but depending on what version your ROM image is, you might want to. You can review your ROM's known bug list and see if any are of concern.
What's the difference between bootflash and sup-bootflash? The former was the bootflash for the L2 engine, used when you run CatOS. The latter is used by the L3 engine, used by IOS. When running "native" IOS, the former isn't used for booting.

Similar Messages

Steps to upgrade Client Side Xe with apex3.2.1

Hi,
I want to upgrade client side xe with apex3.2.1.Please help me to do this.
can you send me any llink with step by step installation of apex3.2.1 over client xe.
Thanks & Regards
Manoj

Hi manoj;
Please follow below and see its helpful for your issue, i belive you will find your answer in those links
http://blogs.oracle.com/SanthoshK/2008/09/oracle_xe_apex_3x_installation.html
Installation of APEX 3.2 on Oracle 10G Database
http://apps2fusion.com/at/kr/384-apex
Regard
Helios

Steps to upgrading iphone 4 with iOS 5

Need steps to upgrading iphone 4 with iOS 5?

1. connect ur phone to ur mac/pc
2. open itunes ( make sure u have version 10.5 )
3. if it doesnt automatically ask u to update ur phone . click on summary and then click update
4. ensure that u backup ur data before updating.
5. click on download and install.
6. wait for a while and enjoy iOS5

Step by Step procedure for Integration of B0 with BI 7.0, Portal

Hi,
My key concerns include integration with SAP Portal, which I did not find in instalaltion guide.
Please advice on step by by Procedure for BO with BI 7.0 starting with the right version of BO to be installed.
1. Which version compatible with BI 7.0 SP 12, LATER TO BE UPGRADED TO sp 16
2. Source of data will be BI and reports will be using BO.
3. What are components to be installed
4. Prerequisites for Integration with BI AND SAP Portal.
5.Steps for Integration with BI 7.0
6. Steps for Integration with SAP Portal- Where to get the sample iviews. What to do for connction between Portal and BO - this i didnt find in installation guide
Thanks,
Harish

HI,
here the items:
SAP Side:
- all machines have to be in the same domain
- BI has to trust the portal
- BI has to accept SSO tickets
- EP has to generate SSO tickets
BusinessObjects:
- SAP Authentication has to be configured
- BI system should be configured has default system in the options of the SAP authentication
- authentication.default parameter in the web.xml for InfoView has to be set to secSAPR3
- BusinessObjects has to be in the same domain
EP side:
- in the system landscape configure the Crystal Enterprise Server Properties for your BI system
- import the portal iview template that is part of the SAP Integration Kit
- create a new iView
Ingo

Steps to upgrade vsom from 6.3 to 7.2

Hi All.
one of our customer needs to upgrade his existing vsom and vsms from 6.3 to 7.2 and he
has purchased the below licenses and he dont need any of the existing data.
L-CPS-M-OM-SW7
L-CPS-M-MS-SW7
L-CPS-M-SASD-7.
as this is the first time I am upgrading to 7.2 can anyone please help me in this regard with simple steps to upgrade to 7.2 and do we need any other things apart from the above licenses

Looking at your licensing, it appears that you have a fairly simple environment. If so, this doesn't have to be complex at all since the customer doesn't need any of the existing data. The simple solution would be to document your settings, approach this as a fresh install, and put your settings back.This will bypass any need for migration tools that might be needed to convert your database and save archives. I have no experience with these tools, so I'm not sure of their full capabilities.
About a year ago, due to learning the system and some poor configuration choices on the disk, I needed to migrate my 7.0 cameras to a new 7.2 system that was configured correctly. Here's how I did it.
1) Document, document, document. Take screenshot of all your settings. Take a backup of the database. Document the number of cameras you have, the number of templates, number of encoders, etc. This data will be used for verification after your migration.
2) Connect to the MySQL database and write queries to obtain the necessary information that is needed to do a bulk import (using Excel) of your cameras, encoders, templates, etc. Below is the SQL I used for my IP cameras. Note: Since analog cameras are configured differently, I used a seperate SQL for these. You should have a seperate SQL for each device type. Copy the results into an Excel spreadsheet.
****** List IP Cameras **********************
select a.name, a.model,
       d.ipaddress,
       e.name as 'Template',
       f.name as 'Server',
       (select name from groupinfo where objectid = a.location_objectid) as 'location',
       (select name from groupinfo where objectid = a.pointtolocation_objectid) as 'pointToLocation'
from camera a,
     networkconfig b, networkconfig_network_interface c, network_interface d,
     devicetemplate e,
     server f
where a.networkconfig_objectid=b.objectid and
      b.objectid=c.networkconfig_objectid and
      a.networkconfig_objectid=b.objectid and
      c.networkinterfaces_objectid=d.objectid and
      a.devicetemplate_objectid=e.objectid and
      a.managedby_objectid=f.objectid and
      a.objecttype=6
order by location;
3) Build out the new system using VMWare (or some other virtualization solution) to test your configurations that you saved in Excel. (This will also let you get the new spreadsheets so you can know what data you need for the import.) This will help you ensure that you do not have any syntax errors. For us, we were migrating from virtual to virtual, so the system we tested on became our new PROD and we simply deleted the old VMs after verifying the new worked. Do not have your cameras run on both systems though. From my experience, you will be fine to pre-provision the cameras to the test system, but do not have streams going to both simultaneously.
4) After you have tested your install and configurations, perform a full install on your Production system and load your configs.
This process worked extremely well for me because we have a fairly simple configuration. All our cameras are Cisco except for a few analog cameras that have been connected to Cisco-encoders. We have only two templates, which we documented manually instead of writing SQL since there were so few. Since we were virtualized, we could easily keep PROD up while we pre-provisioned the new system. If something didn't work, we could easily revert to the old system. I highly recommend testing this in a virtual lab first, because from my experience, I had to go through a couple of iterations in my SQL code to format the data and capture what was needed properly. The syntax can be a bit tricky your first time through. Also, verify (using the 7.2.1) release notes that all your devices are supported and at a supported level of code. For us, some of our cameras were not at supported levels and experienced dropped frames every few seconds until we upgraded these to supported code.
If your config is complex and you don't feel comfortable with the above steps, I recommend going with Scott's solution and seek help from a third party. Also, according to my recent conversation with TAC, skip 7.2.0 and go straight to 7.2.1. Apparently, there was a bad bug in the first one that, if encountered, could result in the loss of archives.
Hope this helps.

Steps to Upgrade from DS 5.1 SP2 to DS 5.2 SP6

Hi Everyone,
Could someone please provide me with the steps to upgrade the server from Sun One Directory Server 5.1 SP2 to Sun One Directory Server 5.2 SP6. Please provide me with the documentation if any.

Follow this guide.
http://docs.sun.com/source/816-6699-10/migrate.html#14992
-Akshay

Steps to upgrade from 8.81 PL01 to 8.81 PL05

Hi,
Please could someone help with steps to upgrade SAP Business One from 8.81 PL01 to 8.81 PL05. I have the 8.81 PL 05 downloaded available with me now.
Thanks in advance!!!!

Hello
Steps:
1. Extract patch
2. Open patchreadme and read the first page, You can see the following:
You can upgrade your SAP Business One to 8.81 PL05 from the following versions:
o 8.8 PL21 and lower
it means you can go ahead from 8.8 PL 01 to 8.81 PL 05
Start upgarde exe, and follow the instructions on the screen. Basically you must upgrade everything.
Regards
János

Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
Thanks in advance.

If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
Also see
MOS Doc 1645862.1

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Hi,
Upgrade steps
1. Install 11.2.0.3.0 rdbms software
11.2.0.3 patch set is a full release.
Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
for more info, Please refer to
Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
https://updates.oracle.com/download/10404530.html
Please select your platform before downloading (Click on "Platform or Language" drop down menu)
if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
and p10404530_112030_<platform>_2of7.zip
<platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
p10098816_112030_LINUX_2of7.zip )
Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
2) Finish the post installation steps as per the patchset README (readme.html).
3) upgrade the database to 11.2.0.3
Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
Patch readme file has Installation instructions.
Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
Thanks,
Krishna

Can I upgrade to Mountain Lion with my 2008 MAcbook Pro?

I have a 2008 MAcbook pro 10.6.8 , 2,5 GHz Intel duel core, 4 GB MHz 17 Inch. It works fine but I am about to receive a new iPhone 5 and want to use iCloud. Is my computer compatible with doing this? ANd what will be different if I do? Will my computer be faster or slower or stay the same?? I also have a older version of Word for MAc (2008 or 2009) , I dont think it will work anymore if I upgrade. Thanks for your help!
d

You are using 10.6.8, so you can sync the iPhone 5 with your computer in this version. However, if you want to use iCloud, you have to upgrade. In this case, you can upgrade to Lion and Mountain Lion. OS X Mountain Lion needs a Mid/Late 2007 or newer MacBook Pro. Read > http://www.apple.com/osx/specs
First, open the App Store and purchase OS X Mountain Lion. While it's been downloaded, make a backup of your data with Time Machine or Carbon Copy Cloner, and check that your applications are compatible > http://www.roaringapps.com
When the download finishes, the OS X Mountain Lion installer will show up, so follow the steps to upgrade to Mountain Lion. After upgrading, open System Preferences > iCloud, and follow its steps to set up iCloud on your MacBook Pro.
Microsoft Office 2008 and 2011 works in Mountain Lion, but if you have 2008, you should update it to the most recent version before upgrading to OS X Mountain Lion

Hi there, I have an older version of 10.5.8. What is the next step to upgrade to the latest version of 10.9 Maverick

Hi there, I have an older version of 10.5.8. What is the next step to upgrade to the latest version of 10.9 Maverick?
Thanks in Advance

If yours is a PPC iMac (G4 or G5) you cannot upgrade further.
If it is an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors

Hi ,
Need some assistance. Logged message with SAP AG, still waiting for response.Anyone that can assist will be appreciated. Error from logs.
/usr/sap/put/log# more SEDCORG.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_ALI_ORG" ("20061108125644")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=1
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT_NEW"
4 ETQ381 request "TP_EXECDBSCRIPT_NEW" means "execdbscript with 46A feature"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ276 Executing SQL-script "ALORDC.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/exe
4 ETQ399 ext. env.: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131
/jre/bin:/usr/java131/jre/bin/classic
4 ETQ399 2006/11/08 12:56:44: put_execute: (tp) forkpid:97258
2EETQ278 Errors during execution of SQL-script "ALORDC.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors ("20061108125645")
Checked TPSQLSTD.OUT log
/usr/sap/put/log# more TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 97258 at 20061108125644
ENV <0x2ff22d14>: dbms_type=ORA
ENV <0x2ff22d22>: dbs_ora_tnsname=BB1
ENV <0x2011c290>: dbs_ora_schema=SAPR3
ENV <0x2ff22d4b>: ORACLE_PSRV=BB1
ENV <0x2ff22d5b>: ORACLE_SID=BB1
ENV <0x2ff22d75>: ORACLE_HOME=/oracle/BB1/102_64
ENV <0x2ff22d94>: ORACLE_BASE=/oracle
ENV <0x2ff22da8>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0x2ff22ddf>: NLS_LANG=AMERICAN_AMERICA.US7ASCII
ENV <0x20147368>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x2014864c>: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131/j
re/bin:/usr/java131/jre/bin/classic
ENV <0x2011be90>: auth_shadow_upgrade=1
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 370.00.09 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
2EETP000 sap_dext called with msgnr "2":
2EETP000 -
db call info -
2EETP000 function:   db_ntab
2EETP000 fcode:      NT_RDTDESCR
2EETP000 tabname:    TADIR
2EETP000 len:        5
2EETP000 key:        TADIR
2EETP000 retcode:    2
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 97258
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0200
tp finished with return code: 200
meaning:
ERROR: see tp's stdout (Standard Out may not be available)
Process with ID 97258 terminated with status 200
History : Original problem was related to environment variables for DIR_LIBRARY. Resolved that issue; UaGui was started as root and not the <sid>adm user. UaServer was started as correct user. Killed session and logged on as <sid>adm restarted UaGui as the correct user. Now this error comes up, SAPup won't allow me continue or retry
Replaced tp, r3trans and SAPup tools. Also when I run the cmd /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL in a seperate session, it completes successfully and creates the necessary views as described in ALORDC.XQL. I checked the ALORDC.LOG to confirm this.
Kind Regards,
Ricky Padayachee

Hi John,
The problem I had was wrong environment when starting the Uagui and Uaserver, must be started as adm user. I also restarted the installation from scratch...
I had an issue with a duplicate database object, SVERS in my case. I dropped the object not required and restarted phase, went through fine.
Let me know, how it goes.
Regards,
Ricky

Can FCExpress deal with 720 50p..

Hey guys,
just wondering can FCExpress deal with 720 50p. I have a Panasonic AG-HMC 41 (40) and when shooting with 720 50p I'm not seeing any great difference especially when I try to slow down the footage. It looks as if its not capturing the full 50 fps. I really want great looking slow motion footage.
I use iMovie to import all my footage.
If I upgrade to FCPro will that solve my problem?
I love FCExpress but also use slow motion a lot and would happily up grade to FCPro if it means I could get better looking Slow Mo.
Thank in advance..

Thank you so much for that.
Looks like I'll just have to save and splash out on FCPro.
I'm guessing by the way you say 'reconform the frame rate' to make movies slow mo' it's not as simple as hitting 'Apple key & J' and selecting your required speed.

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

If I have a 2009 iMac, can I upgrade to use it with Apple TV. It doesn't have Airplay capability. If possible, what should I buy?

You need a newer 2011 or later iMac to use Airplay.
Sorry.
For older Mac, look at an app called AirParrot
http://www.airsquirrels.com/airparrot/

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

Steps to upgrade WS-C6509-E with 720 supervisor

Similar Messages

Maybe you are looking for