Steps to use Classification w service tickets- No categorization schema

I have been searching SAP help & SDN but no luck figuring what steps I need to do to use the classification in the Service Ticket.
1. I used the category modeler to create a 2 level schema.
1a. schema assigned to busines activity ticket in application area, parameter = subject profile, Value = ZACT00002.
1b. status is released
1c. in the categories I assigned to a catalogue / code group / code ZACT00002 (as set up in the IMG - Catalogues, codes, profiles)
2 I assigned the DEFAULT categorization profile to my IC profile (has service allowed to 4 levels)
3. I don't have a service product assigned but not sure I need one (nor know how to assign one)
But when I confirm a BP, the error message > >>>
No categorization schema assigned to application area (BUS_ACTIVITY, SUBJECT_PROFILE, ZACT00002)
& go to service ticket, the classification field is still empty.
Would appreciate if someone could tell me what I am missing.
Edited by: Glenn Michaels on Feb 12, 2008 2:34 AM

Hi Glenn
The Status of the Schema should be active. You can set a Date & Time From (and To) which the schema is valid for.
Normally the default from date is set for 24 hours time, which means you wait till the schema is active before you test, however you can change this, I usually set it to 10 minutes in the future.
That is probably your main issue at the moment, once the Schema is "Active" you should have more luck.
You will need to create a Product for "Service", called INVESTIGATION. Wihout this product you'll be dogged with product related errors.
Before you create the INVESTIGATION Product you'll need to ensure a Hierachy and Category exist which the Product can belong to. I think the Best Practices guide will help you with this.
If you get stuck further, drop another hit.
Good Luck.
Arden.
Reward with points if helpful

Similar Messages

IC WebClient_Field Classification in service ticket

Hello,
We're implementing CRM 4.0 with the "Interaction Center WebClient" (SAP Portal) and the transaction "service ticket" (we use for transaction type TSRV as a basis, and copied it in ZSRV). In the portal header data of our "service ticket", there is a field "Classification", which we would like to customize with values.
=> Problem: we cannot find any corresponding entry in the CRM IMG Customizing for this filed "Classification".
Does someone have an idea?
Thanks a lot,
Regards,
Nad

Hi
for classigication fileds you need to use category modler pcui based application from transaction code crmc_pcuitools and select
CRMM_ERM_CAT as option and click on executre button
then you will find the pcui based category modler view select new button and define the new schema there by selecting the node and subnodes in it assign the codes from subject profile for each label define labels for each node assignthe subject profile under the application area of schema and select the future date and time to activate the schema and release the schema set time 10 min future date andtime and go back to crm_ic transaction open the service ticket transaction u will see the dropdown values at 4 levels appear there
please do reward points if helpful
regards
Vikas

Adding classifications to service ticket in IC WEB CLIENT

Hello,
We use the IC Web Client system with an interface to an HP open view system.
To open a new service ticket we plan to use the CRMXIF_ORDER_SAVE function through a web service.
We would like to add classifications to this order but it doesn't exist in this function.
1.     Is there any function (BAPI) that can open a service ticket with classification?
2.     Is there any function (BAPI) that can open a new classification and assign it to a product?
3.     Is Hp open view is a certified partner of SAP and there for has a connection to assist with the IT Help desk scenario?
Thank you very much.
I will really appreciate it if I will get an answer for those questions.
Nurit Rotman

Ritu,
You need to have Service Add On Extension to view Service Ticket in the IC WebClient.

Classifications on Service Ticket

Hi all,
I'm trying to track down the tables that stores the values which a selected in a Service Ticket for the category modeller classifications.
I know all the source information is held in the Subject Profile structures and the CRMC_ERMS_CAT* tables contain all the hierarchical data, but I am struggling to find out the values selected for a specific Service Ticket.
Any pointer or help much appreciated,
Jon

Hey John,
I'm sort of trying to achieve the same in that I'm producing a extract report of service tickets matching certain criteria and also needs to show the Category values entered against the four category hierarchy fields within the service ticket.
I'll give you a shout when I get a complete solution. I have some code which should (in theory) work and I'm testing it now. It's a very complicated process though.
In the meantime, these tables may be what you want:
CRMC_ERMS_CAT_AD
CRMC_ERMS_CAT_AS
CRMC_ERMS_CAT_AT
CRMC_ERMS_CAT_CA
CRMC_ERMS_CAT_CD
CRMC_ERMS_CAT_CT
CRMC_ERMS_CAT_HI
CRMC_ERMS_CAT_IC
CRMC_ERMS_CAT_ID
CRMC_ERMS_CAT_LN
CRMC_ERMS_CAT_OK
CRMC_ERMS_CAT_QU
CRMC_ERMS_CAT_SP
Regards
Gary

Save the service ticket in the ICWC

Hi,
I want to throw a message in the ICWC when the service ticket is trying to save in the ICWC without giving any one of the classifications of service ticket.
Can anydody please help me where i can put the conditions to throw the message before saving the service ticket.
Thanks & Regards,
Suresh Babu Gade

Hi Suresh,
Did you tried to implement the ORDER_SAVE Badi..for your scenario...
please check...
Regards,
Raghu

Automation of service ticket creation using RFC

Hello Friends,
Here is our new requirement.
In general, in HR team , a manager / employee will perform an action that triggers a workflow in ECC. Then they will call an agent in CRM to raise a service ticket for that. Our requirement is to automate this generation of service ticket when the manager/employee performs an action. But sometimes CRM system will be down. so at that time we need to save the data and create the service ticket when the system becomes active.
Approach:
The workflow will have a method(custom enhancement) that updates a custom table in ECC.
We(CRM) have to develop a RFC function module to read the data from ECC and update it in the custom table of CRM.
we have to create a program to loop the data from custom table and create a service order/ticket by using a function module.
As of now the process looked good.
1. But we don't see any link between the record in the custom table and service ticket generated. we cannot compare the service ticket and from which record it generated?
2. After using RFC we read the data into CRM custom table. How do we compare both the tables and delete the ECC table as soon as the CRM tables is updated?
3. when the service ticket failed to generate we should update the field in the custom table (CRM), the number of failures
Please help me .....Suggest me if there are any other approaches?

For question 1 look at the attachments in oss note 940882 Frequently Asked Questions about ERMS
a mailform can be used but is not required.
For question #2, John Burton wrote an article in CRM expert a few years back that explains this concept well. The email coming into the agent inbox doesn't create the ticket until processed but his article explains how it can and give and auto repsonse to the sender with the ticket number attached.

Service Ticket: Search using Inbox & My Worklist in IC WebClient

Dear Gurus,
When I create a Service Ticket in the IC WebClient in CRM 5.0 and save it, the system generates a Transaction Number which I can then search for by using Interaction History, Inbox and My Worklist.
When I search using Interaction History, I select the relevant Service Ticket and the system takes me to an Interaction Record, and from there I can navigate to the correct Service Ticket.
When I search using Inbox, the system takes me to a Service Order, which I do not believe is correct.
When I search using My Worklist, the system also takes me to a Service Order, which I do not believe is correct.
Any recommendations?
Rgs,
Alan

Hi
You can search service ticket from inbox ideally by entering the object ID in the agent inbox or you can also search for service tickets in interaction record which is an activity transaction type if you maintain the copy control for service ticket from interaction record then you can search for service ticket through the interaction record as well.
refer to best practice link for the service ticket custimiseing settings for icwebelient
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Reward points if helpful
Regards
Dinaker vikas

SAP Service Ticket: Use of due date and traffic light

Presently our company is not doing much with the traffic light and due date when managing our tickets from the inbox. If there is someone making use of these, I would like to know what are some your your Best Practices. Ideally we would like to use these to improve our "issue to resolution times".
We are using CRM5 and we will be updating to CRM7 in May of 2010.
Any eperiences that you would like to share are greatly appreciated.
Regards,
rr

Hi,
We have used this functionality for IC-Agent Inbox. Our Inbound agents can search for the service tickets in there Agent inbox. The tickets are displayed with Due date for the resolution as per the SLA based on the subject and code group. This helps them in understanding of the ticket resoultion time .
also the Different Symbols are used for the tickets
1.Tikects which are still within SLA but are not resolved are classified by Yellow Colour
2.Tickets which have violated the SLA are cassifed with red colour
3.Tickets which are completed within SLA are classified by Green Colur Symbol.
Pls. revert if you have any queries.
Regards,
Uday Borse

Routing Service tickets using Rule Modeler

Hi experts,
We plan to use Rule Modeler for routing Service tickets created in Interaction center.
But, I am not aware of how it can be done. Could you let me know how this can be done?
Thanks & Regards,
Raj

Hi Raj
There is an "Escalate" button on the Service ticket. If you are planning to use that then heres how to configure routing using rules policy:
Business Role: IC_Manager
1. Open search in the rule modeler, select the context ID ORDER and start the search.
2. Select the policy DEFAULT and configure it to meet your business requirements by creating rules and assigning relevant conditions and actions.
To create your own policy.
IMG > Customer Relationship Management --> E-Mail Response Management System --> Service Manager --> Define Service Manager Profiles.
To forward to an organization, use the object type "O".
I hope this helps
Regards
Rupesh

How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

Displaying a bespoke form based on service ticket categorisation

Hi gurus,
I have a question relating to custon IC forms.
We have a requierement whereby the system must present to the IC user a form for data collection immediatley after the user has categorised a service ticket.
After the user has selected the various categories for a service ticket, the system must display a form (either via a popup or in a view embedded in to the main IC window) which the user would then use to capture data relating to that particular call classification.
e.g. if classification = Complaint > Third-Party > DHL, the system must display the form dhlComplaint.html to capture dhl specific data etc.
Questions:
1) would it be possible (techincally) to do this using a popup.
2) If so, how?
2) If not what other options are there?
We are using CRM 4.0.
any useful feedback would be greatly appreciated.
Sergio

Hello Sergio,
I've never used pop-up's in IC webclient. I don't like them very much because sometimes they can give you some problems.
For example: they can be blocked with pop-up blockers programs or if you fill one form in a pop-up windows and close it, you don't have the possibility to go back and correct your data... or because they're sometimes really annoying
But that's is just my opinion. If you consider to create a new view to embed it in the service ticket viewset, consider this guidelines:
1. I would build the new fields to store your form information in order client extension table using EEWB (table CRMD_CUSTOMER_H if header data - CRMD_CUSTOMER_I if item data). This will also make the fields available in the BOL model, and will alllow you to manipulate this values in memory, instead of direct reading/writing to database tables.
2. I would build a new view to handle your form.
3. I would change the Service ticket main view from runtime repository, to recognize your new view.
4. I would create a new navigational link, from view srvthead.htm (the service ticket view with categorization) to your new view.
5. Then, I would create an automatic navigation to the link created in step 4, in srvthead.htm view. This could be launched in the moment the user selects the last level of categorization, or in other moment that you think the form should appear...
Wishes of good luck.
Regards,
Bruno
Edited by: Bruno Garcia on May 25, 2008 11:10 PM

Service ticket issue navigation issues

In CRM 4.0, when the standard HELPDESK icwebclient profile is used, after confirming the bp, when I click the service ticket link on the navigational bar, it navigates to the service ticket view where it shows 4 level of classification dropdown boxes.
In CRM 5.0 SP6 or SP7 (i cannot remember), I used the same standard HELPDESK icwebclient profile and did the above same steps but it navigates to the view where it shows the subject and reason dropdown boxes instead of the classification dropdown boxes.
I looked through the XML file in both CRM 4.0 and CRM 5.0 and both navigate to SrvTHead.htm page.
How do I need to do in CRM 5.0 such that when I click on the service ticket link on the navigational bar, it will go to the view where it shows the 4 level of classification dropdown boxes?
Thanks!

Hello Edward Lee
I have the same problem that you.
In CRM 5.0 (i don't remember the SP), I copied the standard HELPDESK icwebclient profile, after I have created a catalog, a code groups, code group profile, a subject profile and at the end I created a categorization schema. When I go to the service ticket in the IC Web Client, after confirm an account I show the subject and reason dropdown boxes instead of the classification dropdown boxes.
What did you for solving this problem?
Can you help me, please?
Best Regards,
Mary
Message was edited by:
Mary Carter

How to upload Service Ticket in CRM

Hi Group,
I have a requirement to upload a bulk file consisting of all Service Ticket information into CRM system.
The file consists of details as under:
Category, subcategory , Service Ticket #, Issue classification , Status, Creation time and date, last updated info and etc.,
But, my concern is that, I could not find any BAPI for doing this upload of issues into the system. Nor I am not able to get any function module to get the place holders for all the above details into the System.
I would appriciate if you provide me with the details of some BAPI/ Function Module to achieve this task.
So please kindly provide your valuable answers on this.
thanks in advance.
Regards,
Vishnu.

As i suggested you have to use LSMW and use the IDocOption. In this case the IDOC mesage is CRMXIF_ORDER_SAVE_M
Then as you said you have a leagacy file , which you can specify in the LSMW steps and define the Mapping between the File fields and IDoc Segement fields.
And once this is done , the LSMW will take care of reading file and mapping and will create the Idoc . ONce that is done , the ALE Layer will pick this Idoc and carry the Inbound Processing ( calling FM IDOC_INPUT_CRMXIF_ORDER_SAVE_M ).
Hope this helps

How to Navigate from Confirm Account to Creation of Service Ticket

Dear Expert,
My client does not want to create a interaction record after account confirmation. They want to go directly to Service Ticket creation.
I am using CRM 6.0 SP05.
Could you guide me through the steps for that?
Which customizing steps need to be done?
Thank you very much in advance.
Best reagrds
Ahmed Hadi
Edited by: Ahmed Hadi on Dec 15, 2009 2:43 PM
Edited by: Ahmed Hadi on Dec 15, 2009 2:44 PM

Hello Ahmed,
I discuss the pros and cons of this strategy a bit in my book, "Mazimizing Your SAP CRM Interaction Center", but you can also find the basic info in this blog, "[Everything you need to know about the Interaction Record in the CRM Interaction Center|/people/gert.tackaert/blog/2008/09/04/everything-you-need-to-know-about-the-interaction-record-in-the-crm-interaction-center]".
There is a BADI (CRM_IC_IARECORD) that can be used to suppress the creation of the Interaction Record. SAP does not recommend to actually supress the creation of the Interaction Record (as it is needed for various out of the box reporting and analytics options, as well as for maintaining object links and other features). Rather, you might want to simply use Intent-Driven Interaction with the Rule Modeler to automatically navigate to the Service Ticket screen after some UI event like BP confirm or IBase confirm (or whatever other even you want). If necessary you could also remove IR link for the NavBar.
Best regards,
John

Create "Followup document" in Service Ticket

Dear Experts,
I'm performing mass creation for Service Ticket by using IDOC basic type CRMXIF_ORDER_SAVE_U01.
At the same time, i need to create a "Followup document" for the service ticket as well, and hence i utilized the segment E101CRMXIF_DOC_FLOW with below field population:
APPL_SNAME = E101CRMXIF_DOC_FLOW
RELATION_TYPE = VONA
RELOBJ_TYPE = BUS2000116
RELOBJ_OBJECT_ID = 1234567
RELATION_TYPE_ATTR = A
I can not get any Followup doc created. Basically i did tried to take off the value for RELOBJ_OBJECT_ID, but it still didn't worked.
Could you please comment what went wrong? Or any steps that i have left out?
Thanks in advance.

Hello FSCHU,
Please refer notes 1036737 and see if this helps.
regards,
Muralidhar Prasad Chatna

Steps to use Classification w service tickets- No categorization schema

Similar Messages

Maybe you are looking for