Stepwise

Hi Experts,
I am stressful to using PLD since one of our report created using PLD is failed (see subject: repetitive area)
We plan to use reporting service. We have had the template of the report and ready to install. There are 2 users will use it. Pls give adv how to install, config and deploy the report. What components I need to install in the server and user's PC. TIA
John

Hi All,
Thx for advice but I disagree since it must be developed again meanwhile we have had the report from the partner. We just need to install the report again since our server was formatted. Is there anyone who knows the steps ?
John

Similar Messages

Step vs stepwise consolidation

Hi all,
I could not find the setting to choose between step consolidation and stepwise consolidation.
In term of CG & CU hierarchy structure design, how can such design clearly distingush between the two consolidation approach?
Thanks in advance.
Regards
Jasmine

Hi,
But then what is the real benefit of using subassignments? Why do some people decide to go for the "subassignment" approach, instead of using the "matrix" ?
I am not sure, but according to the following example, I think that "Subassignments" could be used to get step 1, but not step 2.
Example: Legal Entity "1" and Legal Entity "2" both have Business Areas "A" and "B"
A consolidation of these 2 Business Area means a 2 steps process:
Step 1: Consolidate Business Areas (eliminations within the same Business Areas):
Consolidation of BA "A" : eliminate LE "1" + BA "A" against LE "2" + BA"A".
Consolidation of BA "B" : eliminate LE "1" + BA "B" against LE "2" + BA"B".
Step 2: Consolidate Both Business Areas (eliminations between different Business Areas):
eliminate LE "1" + BA "A" against LE "1" + BA"B".
eliminate LE "2" + BA "A" against LE "2" + BA"B"
eliminate LE "1" + BA "A" against LE "2" + BA"B".
eliminate LE "2" + BA "A" against LE "1" + BA"B".
Regards
Angel

MM Stepwise configuration for implementation

HI Guru's
I am new in implementation for mm module , but i dont know how to do it stepwise , can you please give me guidence how to do it stepwise , so that i can go stepwise and remember everything ,
Thanks & Regards
Akshay
Note : Subject is widely discussed,Please search forums / various resources before posting.
Edited by: Jeyakanthan A on Dec 7, 2011 12:02 PM
Moderator message:
Locked. Reason: basic question
Please search as it was recommended.
Edited by: Csaba Szommer on Dec 7, 2011 8:45 AM

Following process is to be followed for implementation:
1. Project Preparation
2. AS IS & TO BE
3. Business Blue Print
4. Realization Phase
5. Configuration
6. Unit Testing
7. Integration Testing and User acceptance
8. Cut over Process
9. User Training
10. User manual and configuration manual
11. Go Live & Post Go-Live Support
Now as far as MM Perspective, Organization Structure, Config in SPRO, transport request and some client specific Setting for E.g. Number Range, Release Class or characteristic, Tax Code Condition.
In Cut-over Process, for e.g. Upload Open PO, initial Stock Upload etc via LSMW or BDC.
For Indian tax process involves various taxation procedure,Hence you should be well versed practical excise procedures.
You should be well versed in CIN if business process involves excise & sales taxes.
Basic knowledge of all functionality of SAP MM & Understanding of overall MM practical
business process are key points.

Stepwise details to implement/correct the BADI - WORKORDER_GOODSMVT

Hi gurus,
Please tell me the step by step procedure to implement the above badi for goods issue(back flush of proportionate (Batch split with partial componentavailability) quantity of components for partial order confirmation during CO11N).Also please indicate how to correct the existing badi
Jan

Hi Jan,
refer to the following link for implementation of BADI:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5e/ebb541c5b63031e10000000a155106/frameset.htm
Hope this will help you......

ENHANCEMENT SPOT implementation - STEPWISE

Hello all,
I wanted to implement enhancement spot in standard SAP code.I will be thankful if somebody can tell me the steps to implement ENHANCEMENT spot.
Thanks.

Hi Sandeep
I will share some basic knowledge on them
Enhancement points are regions where can insert our code to suit customer needs...Spots are subsets of points and created inside these points..for an enhancement point multiple active spots can exist
For enhacement-sections : the main idea is to provide a spot to customise the existing process..eg:SAP has done a select criteria..but you need to filter it more by adding a where condition..in that case SAP suggests using Enhancement sections..At any time the first active enhancement section works...even if multiple sections are created(though ideally multiple sections are not allowed to be created)..if you do the procedure below you can see that enhancement-section when a spot is created for it...the code in the parent section is copied and given in the editable mode
Creating spots implementations for points/sections are given below................................................................
to Create a spot in the standard code...click on the spiral icon..screen changes to a different color...place cursor on ENHANCEMENT-POINT/ENHANCEMENT-SECTION keyword of the spot you require to create implementation for...righ click -> "enhancement implementation -> "create" -> a table control comes -> at the bottom "CREATE" button to be clicked" ...give a name and text in customer name space and save -> select the same name just given in the table control ..press 'Tick' .....you will get a space where code can be written..write the code.....save and activate
Also check the following blogs on enhancement framework
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Reward if helpful and revert back for clarifications
regards
Byju

Zooming out stepwise in graph

When zooming in a Labview graph control several times I would like to unzoom in the same steps I zoomed in, eg if I zoom-in in 3 steps I want to zoom out in 3 steps.The built-in unzoom only zooms out to maximum scale, so I guess this has to be done programatically. Has anybody tried this and can provide me with an example in LV 7.1?

Check out the attached. 'Begin time' and 'End time' are user controls; the user can zoom
with either the normal graph control or by manually entering times into the tstamp controls.
'Undo zoom' works back through the queue.
Hope this helps.
Matt
Attachments:
zoom-images.zip ‏35 KB
zoom_queue.vi ‏53 KB

Stepwise approach for creating Organization Structure in SRM

Hi Experts,
Pls do share how we go ahead about creating Organisation Structure in SRM.
I want to get following things clear:
1.Once all the components like company codes, purchasing org, purchasing grps, users have been created.... How do we start with creating org structure....... which element in org str hierarchy we create first.... n so on...
2. In a organisation structure, we do have diff companies, n company has departments.... and department has users...... I want to know how do Purchasing groups and purchasing org we create get assigned to this.
3. What is the significance of Department attribute?? Is it related to MRP Controller of MM.
-Dhananjay

Hi,
Pl refer http://help.sap.com/saphelp_srm50/helpdata/en/b4/9de8cc7d4b11d2b423006094b92d37/content.htm for details.
Regards,
Nikhil

Step by step procedure for uploading photos from iPhone to a PC

I have over 4000 pictures taken with iPhone, but still not yet be able to upload them to a PC.
1) When connected to my IBM Thinkpad X40 with Windows XP, it says "device not on" when iPhone is off, and says "device is in use" when iPhone is on.
2) When connected to my IBM Thinkpad Lenovo T60p, it says "camera detected succssefully", but just does not upload.
Can any one help me with a specific stepwise procedure? Do we need to install some special iPhone driver for the uploading? As you know, the iPhone manual says that the iTune is only one way sync for album.
Many thanks,

Hi Nathan,
Thanks for the reply. I could see "Apple iPhone" when I plugged it in (not as a removable device), but it alwayse says "the device is being used" when I turn the iPhone on, and says "device is off" when I leave the iPhone off, which is a paradox. What mode do you leave your iPhone on when you do the transfer? Any setting is needed in iPhone itself? Do I need to install a specific driver for iPhone (I do not recall one with the purchase)?
Regards,
Jensen

ITUNES new version doesnt work for me.... yet

I need all the possible solutions please.
Thank you.
I've noticed this user name Katrina that kindly has help other members.
Can I get a little bit of help here... It is almost march and since early January I havent used itunes !
please...
help

Persona,
See if anything in this procedure may help (you may not have done the uninstall/reinstall as completely as possible).
A Thorough & Complete Uninstall and Reinstall of iTunes/QuickTime
(Compiled from the collective wisdom of toonz and Da Gopha)
If you want to guarantee a successful upgrade and be proactive about minimizing potential install issues, do the following:
1. Completely Backup your music and iTunes library files.
2. Virus check / spyware scan your machine.
3. Completely remove / uninstall the current version of iTunes and QuickTime from your system.....
3a. – Do a Stepwise clean uninstallation of iTunes
3b. - Then download and install the Microsoft Installer Cleanup Utility
.....And make sure iTunes is really gone.
4. Delete the contents of your temp folder: C:\Documents and Settings\<username>\Local Settings\Temp
5. Reboot the PC
6. Start with the QuickTime standalone installer run from the PC (not directly from on-line)
7. Reboot the PC
8. Completely download (first), then run the latest iTunes Installer from your PC
9. Reboot the PC
The majority of problems out there on the discussion boards are caused by viruses or other system corruption — sometimes self-inflicted by the user (i.e. - people who turn off necessary Windows services) — or out of date drivers.

ITUNES WONT OPEN AT ALL - PLEASE HELP!

Can someone please help me! I downloaded itunes 6 about a week ago, its been working fine up until last night. Everytime I go to open itunes I get the annoying error message - 'itunes has encountered a problem and needs to close'.
I have tried re-installing itunes and quick time, I have tried recreating my library, still doesnt work.
I think it may be something to do with quicktime, as when I click on it on my desktop I get an error message and it wont open. Also when I go to the quicktime page on apple.com I get a message saying about a plugin wasnt initialized. Quicktime isnt in my add/remove programs list either. I have tried installing the QuickTime standalone download, its almost does it then I get error message come up saying something like DLL Function Call Crashed!
I would really appreciate it if someone has any help on this as Apple couldnt care less!

Go here. Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT and do a stepwise clean uninstallation of iTunes. That might help. Sometimes extra hidden files can muck up an installation.

ITUNES WONT OPEN OR REINSTALL!! PLEASE HELP!!

Everytime I try to open my itunes I get a pop-up saying
"QuickTime version 7.0d0 is installed, iTunes requires QuickTime version 7.1.3 or later.
Please reinstall iTunes."
This message also appears whenever I try to update my itunes or reinstall it. Can someone please help me??

Go here. Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT and do a stepwise clean uninstallation of iTunes. That might help. Sometimes extra hidden files can muck up an installation.

"iTunes has encountered an error and has to close"

I'm getting this error message whenever I plug in my nano or my mini. iTunes crashes. This just started happening. So far I've reset, restored, reinstalled - you name it. But nothing works.
iTunes works fine when there's no iPod plugged in.
Help?

well done MAJR!
just a note on the error message "itunes has encountered a problem and needs to close".
there are actually at least three different contexts in which people get this message, and the treatments will differ depending on the context. here's some info on the three most common contexts.
"itunes has encountered a problem ..." when LAUNCHING ITUNES
this is the most common time to see the message. in my experience, 90% of the time this is caused by a broken QuickTime 7.0.x. So the first thing people should check for is whether their Quicktime will launch, or whether it gives them an error message when they try to launch it.
if you get an error message when you try to launch Quicktime, the standard treatment is to swap out your QuickTime. there's actually an Apple KB doc on the problem, although the silly sausages have given the error message incorrectly in the doc (as of the 23 December 2005 revision), which makes it more difficult to find the message when you're searching for it:
iTunes 6 for Windows unexpectedly quits when opened
... that method is pretty servicable in the majority of cases, but it leaves you open to a known complication of a broken Quicktime where people can't uninstall their QT and get an error message citing their QuickTime "uninstall.log". so i usually suggest to people that they try a careful standalone QT 7.0.4 reinstall instead (which gets past the "uninstall.log" error):
download and save a copy of the QT 7.0.4 installer to your hard drive. (run the install from there rather than online.) switch off all antivirus and antispyware applications prior to the install.
Quicktime 7.0.4 Standalone Installer
known complications of QuickTime reinstalls: the most common (for QT versions 7.0.2 and 7.0.3 and iTunes versions 5.0.0.35 through 6.0.1.3, at least) is an error message citing "Error 0x80040707". in this context (again, the treatments for this error message are context dependent too), the most common cause of the Error 0x80040707 is a snarlup in the QT installation registry entries.
what typically fixes it is the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
use the utility to clear the existing Quicktime entries. then try the careful standalone QT 7.0.4 reinstall again.
other known causes of "itunes has encountered a problem ..." on launch: probably the most common of the rarer causes (if you'll pardon the oxymoron) is a rare weird problem to do with the registry and user accounts on XP machines.
to check for that, first head into your "User Accounts" control panel and create a new user account with full administrative privileges. (there's help documentation on how to do that at the left of the control panel screen.) while you're in that control panel, switch off "Fast User Switching" in your logging-on preferences.
now, log out of the old account and log into the new account. can you get itunes to launch inside the new account?
if itunes does launch inside the new account, then try an experiment (this rules out an ultra-rare "false positive diagnosis" of the registry/user-account thing). use the following technique to share the music from your old account to the new account:
iTunes: How to share music between different accounts on a single computer
if itunes still launches from the new account once you've shared the music from the old account to the new account, then you've got the registry/user-account thing.
fixing the old account might be tricky. we've had mixed success with combinations of complete uninstalls of itunes using the following technique:
Da Gopha: Stepwise clean uninstallation of iTunes
... followed by application of a Registry repair program such as RegCleaner or Registry Fix. failing that, it might be worth just "moving house" to the new account.
(there are other even rarer causes of this message on launch ... if you believe you've got one of those, best to start your own thread and explicitly explain as best as you can what the behavior is and what steps you've already taken to try to resolve the issue.
"itunes has encountered a problem ..." when IMPORTING A CD
in iTunes versions 4.9 through 6.0.1.3 this was most commonly caused by a hyperthreading problem on PCs with dual cores and dual processors. on those versions of iTunes, the workaround was to set the itunes affinity to a single core/processor. (Otto42 is our authority on that topic.) but the bug has been fixed in iTunes 6.0.2:
iTunes for Windows quits unexpectedly importing CDs on a dual-processor or dual-core computer
"itunes has encountered a problem ..." when PLUGGING IN AN IPOD
the most mysterious of the three main classes. there doesn't seem to be a common cause of this one (or at least it hasn't been clearly identified yet).
probably the first things to check up on are:
iTunes for Windows may unexpectedly quit when syncing folders of pictures with iPod
... but if no joy there, this is probably the best next port of call:
Troubleshooting an unexpected quit or restart of Windows, iTunes, or QuickTime
love, b

Itunes encountered an error and needs to close-HELP!!

every single time that i open up itunes (or attempt to at least) it says that itunes encountered an error and that it needs to close. this is getting extremely frustrating and the i have tried everything. at this point i'm open to anything and everything, someone just please help me!

Perform a Thorough & Complete Uninstall and Reinstall of iTunes/QuickTime
(Compiled from the collective wisdom of toonz and Da Gopha)
If you want to guarantee a successful upgrade and be proactive about minimizing potential install issues, do the following:
1. Completely Backup your music and iTunes library files.
2. Virus check / spyware scan your machine.
3. Completely remove / uninstall the current version of iTunes and QuickTime from your system.....
3a. - Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
3b. - Do a Stepwise clean uninstallation of iTunes
3c. - Then download and install the Microsoft Installer Cleanup Utility
.....And make sure iTunes is really gone.
4. Delete the contents of your temp folder: C:\Documents and Settings\<username>\Local Settings\Temp
5. Reboot the PC
6. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
7. Start with the QuickTime standalone installer run from the PC (not directly from on-line)
8. Reboot the PC
9. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
10. First completely download, then run the latest iTunes Installer from your PC
11. Reboot the PC
The majority of problems out there on the discussion boards are caused by viruses or other system corruption — sometimes self-inflicted by the user (i.e. - people who turn off necessary Windows services) — or out of date drivers. You may want to consider this if your PC falls into one of these categories.

QT Version 7.1.5.58 ?

Hello to All:
After a previous ordeal upgrading to updated vertion of Itunes few month back Before 7.1 I decided to upgrade to this one.. Big mistake (If aint broke why fix). Did not listened to that one again.. Ok Now I can get iTunes, back the way it was, using the old delete all components and the stepwise cleanup. Can anyone tellme where did I got a verion 7.1.5.58 of Quick Time in my QT directory and how can I deleted, because it not leting me deleted. working on XP. Have done regedit, all other config read here, but no luck. itunes wont open get error message and takes me out.
Thanks

What error are you getting when you attempt to delete that directory and what error are you getting when you try to open Itunes

Date is not getting populated soon after a change in a field which has LOV.

Hi friends,
I have a requirement in my form......
I have a two fields, in my form......
One field which has a LOV's list---------------> the name of the field is "PRIORITY" and it has following LOV's
*) LOW *) MEDIUM *) HIGH..
Second field is of date field-----------------> the name of the field is "DUEDATE"....
I needed is that soon after i select anyone of values from the list in "PRIORITY" column for example assume it has "LOW"...
The due date column should automatically populate the date, accordingly that is setted for LOW..
The same is in case of "MEDIUM" and "HIGH"....
How it is possible to populate the date accordingly soon after i picked one of the LOV's from the priority column...
Whether i need to set any dynamic actions for the due date column...or else....if so means......
guide me friends..in stepwise manner......whether to write any query in back end....
i also tried with query it didnt worked.......
regards,
Harry......

Hi,
If i gave the query that i mentioned above post, in my sql statement, the dynamic action is working but not fetching the correct date for the selected priority..
what is the answer that im getting is
When i select priority as low means
what is populating in my due date field is not the date im expecting........
it is giving some thing in the due date field like the below i mentioned.......
" ,,11/10/10 0&#58;0&#58;0,11/10/10 0&#58;0&#58;0,,,,,,,,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,,,,,,,,11/04/10 0&#58;0&#58;0,,,,,,,11/24/10 0&#58;0&#58;0,,,,,,,,,,,,,,,,,,,11/18/10 0&#58;0&#58;0,,,,,,11/24/10 0&#58;0&#58;0,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,11/27/10 0&#58;0&#58;0,11/26/10 0&#58;0&#58;0,,,,,,,11/05/10 0&#58;0&#58;0,,,,11/24/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0,,,,,,,,,,,11/19/10 0&#58;0&#58;0,11/05/10 0&#58;0&#58;0,11/24/10 0&#58;0&#58;0"
i dont know why it is returning like this......please help me........
Regards,]
Harry......

Stepwise

Similar Messages

Maybe you are looking for