Stereo audio plays back left channel only - premiere pro CC2014

Dear All,
I recently upgraded to premiere pro CC and find that (just like sometimes in CS6) when i place an audio track (or clip with audio) to the timeline it plays back LEFT channel only. When I move the same clip to another (existing or newly created) sequence it becomes two channel stereo and plays back OK.
The question is, since i created sequences with the very same audio settings, what might cause this issue.
(fill right with left channel does not work because it IS a stereo track i suspect sg is wrong with my sequence settings- but i cannot figure out what exactly.)
I hope it's not a bug and it is just me doing sg wrong. all input is highly appreciated! THX in advance!
Misi

I know i just happened to be mid-project when trial period ended...
Still looking for the why's though, since I asked around and there ARE some people who expőerience similar issues!
Thanks in advance (Ann, too)

Similar Messages

  • Audio output from left channel only

    My iPhone 5s (iOS 8.1.1) suddenly developed a problem with audio output last week after about 9 months of ownership. Through the headphone socket and Bluetooth streaming, only the left channel could be heard. I arranged an appointment at the Apple store and they confirmed after they carried out a restore (iOS 8.1.1) that there was only audio from the left channel. The phone was replaced under warranty.
    My new phone was partially set-up in store and all I had to do was load my backup when I got home. I loaded the backup from my Mac and tested the audio output. To my surprise, the new phone had exactly the same problem as the one that was diagnosed as faulty in the Apple store i.e., audio output on the left channel only.  I contacted Apple support via chat and explained the issue. I was advised to test the new phone without my backup being loaded. I restored the phone and tested the output using both Bluetooth and the headphone socket and there was a stereo output as normal. I reloaded my backup and it returned to left channel audio only. I was advised to then reset the phone and this cleared the problem. Corrupt backup data??
    What I can’t understand is that two phones exhibit an identical problem, with one being a hardware issue and the other apparently a software issue. Too much of a coincidence if you ask me.
    Is it possible that an app could cause a problem leading to a hardware failure?

    Submit bugs to http://www.adobe.com/go/wish . More on how to give feedback: http://bit.ly/93d6NF

  • Audio Plays on Left Speaker Only?

    When I recorded my footage, I had the audio running into my camera from an XLR cable connected to my shotgun mic. It was connected into input 1, which records the audio into the left channel.
    When I edit the footage in Final Cut, I delete the right channel, which has no audio, and I duplicate the left channel and drag it onto audio track 2. I then make audio track 1 and 2 a stereo pair. I do this for all of the clips and I then send the audio project to Soundtrack Pro.
    Once the project loads in Soundtrack Pro all I hear is the left channel and I'm unable to pan the audio to hear it from both speakers. Does anyone know what I am doing wrong?

    Ken,
    Check your Submix. Make sure it is set up as a Stereo output.
    -paul.

  • Mono audio playing from left speaker only

    For websites who have mono recorded (single channel) podcasts, audio in firefox will only play from left speaker instead of picking center channel.
    If audio is downloaded and played on seprate dedicated player it defaults to center or if same site is played in IE also defaults to center.
    Stereo recorded podcasts have no issue.

    I assume that not a Flash player is used in this case, but that this is an issue with the (built-in) HTML5 media player and the audio tag is used.
    Is that correct?
    The Flash player should show the Flash context menu if you right-click the player area.

  • Audio plays in iTunes but not Premiere Pro.

    No matter what format I import; MOV or MP4, the audio is very low and sounds like it is coming from the bottom of a tin can in Premiere Pro.  I can hear it properly in iTunes. 
    I am aware MOV files need to be converted, but MP4 files are also unintelligible. 
    What am I doing wrong?

  • Stereo audio in left channel only.

    Hi,
    I have a strange problem with one of my projects.
    I have created a large number of "talking head" videos/projects. I export them to FLV using one of PREs default settings. For just one of these projects I get audio in the left channel only. All other clips are OK.
    When I play the clips on the timeline the audio is perfect in both channels. So somewhere in the rendering/output process I loose the right channel.
    What am I missing here?
    Thanks in advance.

    Hi and thanks for all input.
    Yes I use a mono mic, but the camera puts the sound on both channels.
    When I play the timeline I hear the voice in both channels.
    The timeline audio track shows waveforms on both channels.
    Here is a pic of the timeline:
    The project is corrupt somehow. I just tried creating a new project with the same video files and made a short flv out of it and it comes out OK.
    I will try to redo this one which leads me to another question which I will post in another thread if not already answered.
    Thanks for your input.

  • Zoom H4n Stereo Audio Plays Only Left Speaker - How to Double It?

    Hello Everyone,
    I've been working on a few projects and noticed that the audio captured by the Zoom H4n will preview in both speakers (and before I drag it to the timeline I can right click -> Modify ->Audio Channels and get all the options there as well as hear it from both speakers) but as soon as I drag it onto the timeline it will only play through the left speaker.
    Any ideas of either where I'm going wrong or how I can double the audio? It's all already cut together so I'm hoping there's a fix that is semi-time efficient to apply lol. Thanks so much for your help,
    -Karl

    Glad that helped! Next time, you can use the Modify > Audio Channels command to handle this before editing. If you only have audio on the left channel of your stereo source clip, or don't care about what's on the right, you could set the stereo audio to be treated as dual mono. When you put the mono source tracks into a sequence with a stereo master track, the mono source will automatically be routed to both stereo output channels. You can then use the Pan knobs in the Audio Mixer to position each sequence track in the stereo spread. This has to be done before you use the source clip in a sequence, however.

  • Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

    The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
    I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
    Basically I just want to turn one-channel audio into two-channel audio.

    25424...
    Sure you do not want to give the Fill Left and Fill Right another try?
    According to the Adobe document Adobe Premiere Elements Help | Effects reference
    Fill Left, Fill Right
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
    From what you wrote, your Premiere Pro video seems to be saying the same.
    If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
    Audacity: Free Audio Editor and Recorder
    And, then import the Audacity edited audio back into Premiere Elements project as source media.
    Is the speaker system OK?
    We will be watching for your results.
    Thanks for the follow up.
    ATR

  • When I press 'Low Latency' button I only have audio coming through left channel ?!

    When I press 'Low Latency' button I only have audio coming through left channel  !?
    When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
    Can anyone please advise why this happening and how I can fix it ?

    I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
    This section, for instance:
    Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
    If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
    So more information is needed before anyone can help you any further.

  • When I import my files only the audio plays back not the video. If I export the sequence its there?

    When I import my files only the audio plays back not the video. If I export the sequence its there?
    I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
    Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
    As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
    Any help would be appreciated and if theres any more info I can provide please let me know.
    Thanks
    Drew

    Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
    Also, More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • I have a scarlett solo  usb mic interface that only records audio to the left channel in quicktime.

    When I record a movie using my web cam in conjuction with my scarlett solo usb mic interface it only records audio to the left channel. I have tried everything and looked everywhere! Any help would be appreciated.

    Maybe:
    Quicktime Input is always mono?
    how can I make a stereo recording in QuickTime?

  • I can watch my custom DVD in iDVD 7 preview but burnt dvd plays back black with only the audio

    I can watch my custom created DVD in iDVD 7 preview but once the disc is burnt and I play it back in DVD Player, the screen is black with only the audio playing back. I have tried using three different blank DVD manufactures.

    Hi
    Most probably depends on what movie codec You feed iDVD. May be You find any clue here.
    DVD quality
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus  less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    Yours Bengt W

  • Imported files with stereo, output comes in one channel only

    While being no expert in Encore or the jungle of transcoding settings, I still dare to ask.
    I have imported a number of AVI files (exported with stereo sound from Ppro) into Encore 2.0. I have not touched any sound settings, but still my output (both in preview mode and the final DVD) produces sound only in the left channel. Baffeled as I am over this, I struggle to find some sensible explanation to the problem.
    Any feedback would be appreciated as the project hopefully goes into production soon.
    Brgds,
    Geir Waaler

    Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

  • If I have audio coming from left channel. How do I make same audio Left and Right?

    Hi there,
    I've recorded  some footage with a mono mic and it recorded the audio on the left channel of the audio. In FCP. I placed this audio clip as a part of a multi-cam clip but the sound is only coming out the left. Is there a way to set this audio to mono or to make them play the same levels through the left and right channels?
    Thanks,
    Caleb

    Wow! 30 Seconds later, I figured it out. LOL
    Under Inspector for audio, you just click on channel configuration, click on channel and use "Dual Mono" mode. Thanks Caleb!

  • HEP!!!!! The video and the audio not sync after export from Premiere Pro CC 2014

    when i play in premiere it ok but when i export it become not sync whith the audio

    i was do a test with some player ,when i play from all this player it result is not the same:
    KMPlayer :Audio not sync with video
    itune :audio not sync with video and very lag
    QuickTime :Can't play anymore
    Windows Media Player : Very good no lag and the audio perfectly sync with video
    put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
    put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
    Nero Kwik Media :Very good no lag and the audio perfectly sync with video

Maybe you are looking for